Change and Incident changes

Folks,
What is the view to get State change from Changes in DW? and to get Support Group change from Incidents in DW?
Regards,

dbo.changerequestDimvw
Antoine AL Ibry

Similar Messages

Start page changes and settings changed every time firefox is turned on goes back to normal setting

I have down loaded firefox several times and it wont keep the options i select in options, the home page goes to snap do whenever firefox is restarted

hello stevestella, if your manual changes don't 'stick' after a restart of the browser, please look out for any suspicious extensions (like 3rd-party-toolbars or things you have not installed intentionally) presently installed under '''firefox/tools > addons > extensions''' or the programs section of the windows control panel and remove those entries.
in case this doesn't solve the issue please try this: go to firefox > help > troubleshooting information > profile folder - "show folder", then a new window will open up. in this window look out for a file named '''user.js''' (it might be used to overwrite your custom settings). in case it is present , delete or rename this file and restart firefox afterwards.
[[Remove a toolbar that has taken over your Firefox search or home page]]
[[How to fix preferences that won't save]]

How to compare the value of a cell before changing and after changing.

Hey there,
Now I want to implement a JTable. And the requirement is that users can edit a cell in the Table only once. I think there are two possible ways. One is that after user edited a cell, I will set this cell read only. Another way is to compare the vaule before and after the changing. If it is different, then write back the previous value.
But I did not know how to implement in Java. Can anybody help me?
Thanks alot!
Shelly

inevitably, you will have to save a before copy of
the data, what this many times amounts to is that you
will need to have 2 identical data structures before
you start or some type of locking mechanism for each
piece of data.Why is this inevitable? I don't see it as inevitable at all. In fact, it's quite simple to implement a TableModel that returns false when isEditable(int, int) is invoked for any cell that has already had setValueAt(Object, int, int) inovked on it, for example. Depending on the requirements and implementation a different methodology may be needed for determining when the edit has taken place, such as a custom editor that notifies the TableModel when stopCellEditing() is invoked. Heck, overriding editingStopped() in JTable to do it might even work.
So, create a TableModel that returns isEditabe(int, int) as true only if the cell hasn't been edited yet. The only problem to solve from there is how you know when it's been edited. I've already given you a few leads on that, it's not particularly hard but depending on your exact implementation it may require different solutions.

CODE CHANGE and DATA CHANGE while monitoring

Hi,
I have a scenario where I got one system error with restart possible.
The failure happened because of wrong data or code.
I want to know, whether we can change the data/code while monitoring and get it reflect while the next re-start of the same message.
Thanks & Regards
Katta Mohan Reddy
Message was edited by: Katta Mohan Reddy

Hi Katta,
the only way (within the standard)
is I believe using the test tool (component monitoring) to send the message directly to Integration Engine
but... this does not always work (at least in my case)
you should try to validate the message before sending it or develop a way to resend it from the <b>sender system</b> with changed data - this is the best practice but I agree that tool for changing the data in XI would be very helpful
Regards,
Michal

GRC - CUP : Account changes and UMR Changes

Hi,
When we try to make changes for user account or UMR, its seen that only certain of the data from the SAP user master record is populated into GRC. This includes name, address, email id etc..
Is it possible to get some more formation from SAP user master to be displayed during account changes ? Is this configura
ble in GRC ?
Pls do revert.
regards,
Ashok.

Hi,
When we try to make changes for user account or UMR, its seen that only certain of the data from the SAP user master record is populated into GRC. This includes name, address, email id etc..
Is it possible to get some more formation from SAP user master to be displayed during account changes ? Is this configura
ble in GRC ?
Pls do revert.
regards,
Ashok.

Just started using Lightroom 5. Is there a way to have imported photo changes in Lightroom automatically happen on my hard drive (MAC), this includes develop/editing changes and location changes. Do I have to import them a specific way or have a change se

Got tired of iPhoto and finally committing to using lightroom. Using the Lightroom 5 i purchased last year and want to commit to making it my primary way of managing and editing all of my photos ( about 8K). Is there a way to have imported images from my hard drive/Finder (MAC) show as the edited or moved image when i am working in lightroom? Basically want what i am doing in Lightroom to be reflected on my hard drive and vice versa so that i don't have to "add" or "copy" every time I want to work in lightroom.

No need for apprehension Heath.
Unfortunately Lightroom does have certain limitations:
A particular catalog can only be accessed by one instance of Lightroom at one time.
(ie it is not designed for multiple simultaneous access.);
As far as I am aware a catalog cannot be accessed remotely although images can be.
Victoria Brampton has a solution using Dropbox where both the images and the catalog are stored on Dropbox.
Individual users download the catalog to thier workstation and work on images etc and then shut down Lightroom and update the catalog back to Dropbox.
No one else should acessing the catalog or images while one user is using the catalog and images otherwise a conflict will arise and someones work will be erased.
Disclaimer: this sort of setup is NOT supported by Adobe and is not risk free (for more reasons than I have elaborated).
Tony Jay

Where is document number and position changed in CDPOS?

Hi experts!.
I think that my question is very easy but I don't know where is it.
I need to know more details about item changed (item information is in CRMD_ORDERADM_I but I don't know relationship, maybe OBJECT_ID??)
A lot of thanks in advance.
Best regards.

First of all a lot of thank you for your quick answer.
I have document class, I know it.
But I don't know document number changed and position changed.
I re-write my question:
I have data in CDPOS but details of item changed are in CRMD_ORDERADM_I table. What is the connection between this two different tables? OBJECT_ID no. Maybe OBJECT_ID is a sum of document numberposition... Something like this?.
A lot of thanks in advance.
Regards.

Minimum steps required for Change Management and Incident management

Hello experts,
Does anyone have a check list of the absolute minimum steps required for getting Change Management and Incident management functioning in Solution Manager.
I just need it to function with creating changes and incidents and be able to assign them, change their status and close them.
The purpose is to get an idea if this is something for us to use. If we then find it useable, then we will go for a full scale implementation using official guides, education etc.
I just need an absolute minimum guide for demonstrating the functions, and if you guys have any recommendations, things we should pay special attention to or other experiences feel free to tell me.
Thanks in advance.
Regards,
Kenneth

Hi,
There are a number of Blogs in the SDN about Charm and ServiceDesk, explaining first steps and more.
Check these to start:
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
The Complete ChaRM Solution
Change Request Management scenario: Usual questions and known errors
First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
Regards,
Jan

Window sizes settings have somehow changed and my windows do not open in the correct size anymore. How do I get my original window sizes to come back PERMANENTLY?

After upgrading to FF 10.0, my window sizes are not correct. I use a web-based invoicing system and my invoice windows used to open to the size of the invoice. Now, it opens invoices in full screen. I need the invoice windows to open the way the site tells them to open. How do I make that happen again and never change after that?

Safe mode disables the installed '''Extensions''', themes ('''Appearance''') and '''Plugins''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. So it could be that an extension is causing it. You can try to isolate it starting with script blockers and similar extensions and '''Disable''' or '''Remove''' it.
Please also note that safe mode also disables hardware acceleration: '''Tools''' > '''Options''' > '''Advanced''' > '''General''': '''Use hardware acceleration when possible'''.
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

Hi Support team, somehow my mozilla settings have been changed and it baceme transprenet, now how to change back to normal ?

Hi Support team, somehow my mozilla settings have been changed and it became transparent, now how to change back to normal because everything is transparent, menus, pages etc.

This could be the same problem other users are reporting as a white screen or black screen, caused by an incompatibility between Firefox 33 and some older graphics card/chipset drivers.
Please disable hardware acceleration as a temporary workaround. Step-by-step directions in this thread: https://support.mozilla.org/questions/1025438
Does that work?

Every time I try to buy a song, a message pops up stating "Your Apple ID has been disabled. I have changed and reset everything. How can I fix it?

Every time I try to buy a song, a message pops up stating "Your Apple ID has been disabled." That's it. Nothing else. I have changed and reset my email, password, security questions, and billing info. The message still pops up. I am just trying to buy some music. Any ideas?

Contact iTunes by:
Contact iTunes

[svn:fx-trunk] 9407: Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties .

Revision: 9407
Author:   [email protected]
Date:     2009-08-19 15:11:34 -0700 (Wed, 19 Aug 2009)
Log Message:
Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties. This states test exposed this.
We should rethink if we want to clear hostFormat rather than have a hostFormatChanged flag. If there is no hostFormat at measure then it has to be fixed because there is no line break format to check for auto-size.
QE notes:
Doc notes:
Bugs: SDK-22779
Reviewer: Gordon
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22779
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as

Oh my god, it is too long! You definitely check out types, casting and especially ODP.Net (it does everything for you)... etc. They can help you to simplify your code. I do not have enough time to copy paste it to Studio and understand and solve your issue, so I got title of your message as your main question.
In Oracle, you can create an autonumber field by using sequences object. This is really useful when you need to create a unique number to act as a primary key.
Basically you can create a sequence simply typing;
CREATE SEQUENCE MY_SEQUENCE;
now you have a sequence called "MY_SEQUENCE"... Then, I advice you select a number from sequence;
select MY_SEQUENCE.nextval from dual;
I said I advice actually kinda must, although it called sequence, I cannot be sequential. Do not even try to predict the value. You can be sure that it is unique number so you can use it.
Then insert you record and use that number part of your primary key. I think that's it. Have fun.

I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it

I downloaded an upgrade to my adobe reader today, and ever since my search engine has switched to yahoo and wont change back to google. I have a macbook pro, help please? Does anyone know how I can change this back? I have tried through my settings but it doesnt work

Hi Timia,
If you are using Safari as a web browser :-
Open Safari, go to Safari menu > Preferences > General, and put Google as the homepage. Then, choose Google as your default search engine.
If you are using Google Chrome as the web browser :-
Open Google Chrome.
In the top right corner of the page, click the Chrome menu Chrome menu > Settings.
In the "Search" section, select Google from the drop-down menu.
Let me know if you still experience any issue.
Regards,
Aadesh

BPS and attributes change

Hi,
I'm currently working on BI-IP with planning function "Repost on Basis of Characteristic relationship" and it works well but i would like to know if there's something like this in BPS.
Some old projects are in BPS and there are some derivation by characteristic relationship. In BPS if an attribute changed from the last writing a new line is created with the new value but i don't think there's another line to cancelled the fisrt one (line with old attribute value).
I hope someone can find an issue for my question.
Raito.

After few test with BPS it doesn't work like BI-IP.
Let's take an example to be sure we speak about the same thing.
I've got a Web Interface for the input where we need to fill one Order Number with an Amount. On my Planning Area, there's a derivation by characteristic relationship for profit center (attribute of Order Number).
I fill my interface with Order Number A and an AMount of 10.
In my cube i have something like :
Order number = A / Profit Center = AA / AMount = 10
If my master data changed and my new profit center for Order number A is AB. If i changed my data in the input with the value 20, in my cube i've got something like :
Order number = A / Profit Center = AA / AMount = 10
Order number = A / Profit Center = AB / AMount = 10
For me it's not good because i need to have 20 in my profit center AB and 0 in AA like how it works with BI-IP and planning function "Repost with characteristic relationship". SO i need to have 3 lines in my cube
Order number = A / Profit Center = AA / AMount = 10
Order number = A / Profit Center = AA / AMount = -10
Order number = A / Profit Center = AB / AMount = 20
I hope it's clear ...

Change and Incident changes

Similar Messages

Maybe you are looking for