Change Arabic Lable In Self-servise ( Not Customization )
Hi All ,,
I have self-service page and i need to change prompt Or ( lable ) of one field and it's in arabic format..
I did not find this prompt in personalization but i find it in workflow builder.
Summary of Problem :-
1- Change arabic Lable In Self-service Page .
2- it's not in Personalization it's in Workflow .
And It's a screen shot of this case,,
http://www8.0zz0.com/2009/10/07/09/327873372.jpg
Regards
M. Salah
You need to find the correct .JSP for the page you want to edit. You would need to grab it from the server. If you are an Oracle Tech. Developer, you should know the path to find one. Then modify the .JSP in Oracle jDeveloper and upload it back to the server. If you are using Apache, you probably need to bounce it to reflect the changes in the new JSP.
Thanks, Naveen.
Similar Messages
-
Re: IMpact in changing company code to company relation not during monthend
Hi Guru
I would like to know your opinions about the impact that may arise in changing company code - company relationship during the mid month(not exactly mid month - anytime expect month end )? If there is an impact what would be the best approach. We suggested to the change at the month end and do the month end activities ..but due to management decision, situation may appear where it needs to be done during the month . They have inter-company transaction .
Here is the scenario :
Company A has 1,2,3 and 4 as it's company code . The company code 4 now needs to be linked to a new company B . How can this be done during the middle of month ? How to get the reports for new company A and Company B and make sure the entries are correct one .For example on 18th of month company code 4 is been moved to company B. how will the assets depreciation will be posted that will reflect in Balance sheet . Let say total depreciation for the month is 300$( 30 days in month). I believe this will show up in both company B/L sheet as 300$. We are looking to differentiate 180$ being posted to Company A balance sheet and 120 to be posted to company B balance sheet .Your input on this will be highly appreciated.
Thanks
GobiHi
Transaction <b>OX02 </b>changes the name.
It is not easy to change your company code to a new one.
You would need to copy your existing company code to the new one and go through the IMG and verify all settings. Then reconfigure all the modules that are using the old company code like purchasing, sales, etc. to point to the new code. Finally, you would need to transfer all the legacy data. Therefore it is far easier to keep the existing company code but give it a new text name.
Copy all the customization in a new client, no transactions and no master data. So youll have the same settings with your live system.
Created a new company code with the new currency, and copy all the customization. This step was to minimize step in re-customization.
Uploaded all the master data...and do a new transaction
The suggestion is don't do that in a live system or else youll have a big problem then.
Message was edited by:
SHESAGIRI.G -
I found some problem to change label text in the prender method , I create a label on the form and type "Customer" on the properties text .
I want to change label from "Customer" to "Supplier" in the prerender method , I found some strange behaviour.
If I type something on the properties text , I can't change the label text on the prerender method for the first time to load the form. If I submit the form , the label text can be changed.
If I do not type anything on the properties text, I can change the lable text on the prerendner method without any problem , no matter it is first load or submit .
Anyone can help me to solve this problem ?
ThanksThis is a tough one to explain. Here is one explanation from the Delving Into Components tutorial:
As with the JavaServer Pages implementation, when the server constructs a page from JSP source, the tag attribute settings in the JSP source take precedence over runtime settings. For example, if you set the text property for a Static Text component to "moon," the IDE adds text="moon" to the Static Text component's tag in the JSP file. Even if the page's prerender method has a staticText1.setText("sun") statement, the Static Text component shows "moon" when the application renders the page. If the page is rerendered, the staticText1.setText("sun") statement takes affect and the Static Text component shows "sun." If you visit another page and come back, the server once again constructs the page from the JSP source, the values set in the JSP tag attributes take precedence, and the page displays "moon." -
Change of Lookup Codes shall amount to Customization?
Dear All,
We are going to Implement Withholding Tax as a Workaround for Retainage in Payables Module.
We would like to change Invoice Distribution Type Lookup code from 'Withholding Tax' to 'Retainage' so that anybody,who is having a look at Invoice can understand the amount adjusted as Retainage.
My first doubt is, Whether this will be treated as Customization? (Remember we are changing the Meaning of Lookup code and nothing else).
My Second doubt is, Whether Lookup Code Meaning change will have any affect on any Patch Application? (Some Patches will check the Lookup codes)
Please Clarify.
Thanks in Advance,
SridharChanging meaning of lookup code is NOT customization.
And it will not cause any problems in patch application.
Hope this helps,
Sandeep Gandhi -
Change IView in Employee Self Service
Dear Expert,
I want to change IView in Employee Self Service - Personal Information. Since IView assigned for my country does not consist of sufficient field required by my client, so I want to try to change IView in ESS to use IView from other country.
Please help if you have any information about how to do this.
Thanks & Regards,
Febrianti.please check the name of the java application available for malaysia. I think it is sap.com/essmypdata/Per_Personal_MY now you need to go to the resource configuration in spro and change the name of the application.
most important: I dont think this will solve the issue you have as if the employee belongs to a specific country and if you attach another country service then it results in config.
The approach that I would advise is take the service decide the custom field and modify the service. -
The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?
Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden -
Status change from 'Completed' to 'In Process' not allowed
When configuring Appraisals in R/3 we want to change the Status of 'Completed' when pressing the 'Reject' button so that it moves to the Target Status of 'In Process'
However, we are getting an error message:
Status change from 'Completed' to 'In Process' not allowed
The SAP help states the following:
In Process (only if final appraisal or part appraisal is defined)
This has been defined at Template Level.
So I don't understand why we are getting the message.
Does any one else know of a way to configure the Appraisal template so that after it has been 'Rejected' it moves back into 'In Process'
Thanks
MN
Points Rewards!Hello Andreas,
Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
Cheers,
Mike -
How do I change just my iCloud email address not my apple ID?
How do I change just my iCloud email address not my apple ID?
You CANNOT change your iCloud email address once it is created and associated to you Apple Id (usually it is another email address). First time you activate iCloud on your device and turn on email setting, you are prompted to create an iCloud email account and after choosing one that is available you are CLEARLY warned that ONCE CREATED YOU iCLOUD EMAIL IT CANNOT BE CHANGED!!!
Fig.1 Warning if desired iCloud email Fig. 2. Warning about creating new iCloud
address is not available email which will be associated to you Apple Id
You have two choices: a) create an alias for that account after you sign in icloud.com using either your apple id or your new created icloud email account (that's what I did) or b) create a new Apple Id (with all the pain it involves)
I typed an incorrect iCloud email address and was linked to my Apple Id and now I have to live with this forever!?
The workaround was to create an alias, but I have the feeling that something is wrong with my Apple Id
All of us might make a petition to apple to allow us to change the 'main' icloud email address. What if I misspelled it!? How difficult can it be?
I hope this be helpful and answer your question.
P.S. In the same way... once you create your Apple Support Communities USERNAME it cannot be changed too! -
Dear support @Apple,
I have tried to log in App Store with my Apple ID 3 times but never possible.
I have tried to change password 2 times.
It was successful.But soon after change of my password, I could not log in App store.
It says always incorrect user name or password. But I input correct ! Because just I successfully changed my password through secret question.
Third time when I tried to change password, the page did not open!
So I checked my connection by netstat , and I trace the IP address ; 17.154.66.17 this is apple IP, but when I trace , it did not show the route. I will copy
Traceroute has started…
traceroute to 17.154.66.17 (17.154.66.17), 64 hops max, 72 byte packets
1 220.224.141.129 (220.224.141.129) 490.517 ms 64.527 ms 94.524 ms
2 115.255.239.97 (115.255.239.97) 65.157 ms 89.128 ms 89.806 ms
3 124.124.251.241 (124.124.251.241) 104.972 ms 79.051 ms 96.948 ms
4 * * *
5 62.216.147.137 (62.216.147.137) 102.266 ms 85.581 ms 88.352 ms
6 xe-0-0-0.0.pjr04.ldn001.flagtel.com (85.95.25.186) 221.939 ms 225.223 ms 236.605 ms
7 xe-11-0-0.edge5.london1.level3.net (212.187.138.53) 231.629 ms 232.045 ms 233.673 ms
8 ae-52-52.csw2.london1.level3.net (4.69.139.120) 373.798 ms 390.412 ms 383.277 ms
9 ae-57-222.ebr2.london1.level3.net (4.69.153.133) 382.653 ms 382.558 ms 376.740 ms
10 ae-43-43.ebr1.newyork1.level3.net (4.69.137.74) 405.088 ms 377.679 ms 386.527 ms
11 ae-91-91.csw4.newyork1.level3.net (4.69.134.78) 378.499 ms 389.733 ms 396.375 ms
12 ae-92-92.ebr2.newyork1.level3.net (4.69.148.45) 391.706 ms 389.605 ms
ae-82-82.ebr2.newyork1.level3.net (4.69.148.41) 381.615 ms
13 4.69.135.185 (4.69.135.185) 380.183 ms 414.398 ms 387.054 ms
14 ae-91-91.csw4.sanjose1.level3.net (4.69.153.14) 384.980 ms 381.375 ms 386.453 ms
15 ae-4-90.edge2.sanjose3.level3.net (4.69.152.209) 377.304 ms 365.457 ms 373.281 ms
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
31 * * *
32 * * *
33 * * *
34 * * *
35 * * *
36 * * *
37 * * *
38 * * *
39 * * *
40 * * *
41 * * *
42 * * *
43 * * *
44 * * *
45 * * *
46 * * *
47 * * *
48 * * *
49 * * *
50 * * *
51 * * *
52 * * *
53 * * *
54 * * *
55 * * *
56 * * *
57 * * *
58 * * *
59 * * *
60 * * *
61 * * *
62 * * *
63 * * *
64 * * *
What it means??
Please help !!
To post this question, I tried thierd time to change password, and before I tried to log in to App store, I logged in this community, and I could !
Then I could finally log in App store also.
But still I feel something is wrong with my connection.
Why the trace route does not show to the apple site ?This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/ -
I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem
You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.
-
HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?
I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?
-
Experts !
Error (23317)
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Recommended Action
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Is this limitation by design? If we have a shared VHDX between two VMs, then I am not able to change the VM properties from SCVMM.
SCVMM 2012 R2 with Windows Server 2012 R2 Hyper-V.
Appreciate any help !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.comHello,
that is a VMM issue.
If you did not deploy your virtual cluster from a VMM service template, VMM doesn't recognize the configuration.
Until MS got it fixed, you could use the workaround from system center central:
http://www.systemcentercentral.com/tag/shared-vhdx/
This posting is provided >AS IS< with no warranties. -
Error "Status change from READY to COMMITTED is not allowed"
Dear experts,
once again SAPs workflow environment drives me crazy with mysterious error messages.
Some time ago I posted a question here concerning the problem that I cannot put back a workitem by using function module SAP_WAPI_PUT_BACK_WORKITEM due to a lock on this workitem which has been set right after it has been double clicked in the business workplace workflow inbox:
[How can I put back a workitem before I'm back in the business workplace?;
Since I do not want to dequeue the lock for the workitem in my application (where the user finds the appropriate detail information along with the function buttons for approval, rejection and F3/BACK) I tried it with calling a POPUP_TO_CONFIRM ("Do you want to put back the workitem?") directly from within the BO-method, right after returning from the FM that called my application. From here (the popup then shows in front of the business workplace instead of the application) the locking doesn't seem to be a problem any more! But whatever I do after the users decision to put the WI back - calling the FM SAP_WAPI_PUT_BACK_WORKITEM or trying to leave the method with macro EXIT_CANCELLED - leads to the error message "Status change from READY to COMMITTED is not allowed" and the workitem changes to status ERROR, too. This message seems to be bull***t, since the status of the item is supposed to go back to READY.
Does anybody have experience to help me on that ?
Thanks in advance
regards
AndreasHello Andreas,
Ah, sorry, there was so much talk about user decisions that I assumed you were using a standard decision task.
Still, I would be extra careful of changing the way workflow usually works because you have an unknown target audience that are based on the standard.
The standard SAP philosophy is quite simple: cancel/F3 or do nothing and it stays reserved. If you do not want it reserved, you need to perform an action. This is based on a majority of processes: in most cases when you execute a work item you will also be the one who is going to completed it. Replacing it is the lesser used of the two alternatives, therefore it is the only one that requires an action on the part of the user.
Again, this is intended as constructive input. Strange quirks and unusual behaviour tend to add a black mark to software if they do not make things easier to use. In many environments users are not even aware of the reserve/replace business, so there you would be adding an additional layer of complexity.
Personally I would find an exit popup annoying as a regular workflow user - regular decisions can be approved with one click, or I can back out with a single click if I need to make a phone call or look up some info before approving - but with this new-fangled thing I've got an extra button to click and an extra thing to think about. This is especially the case in a payment approval scenario where you may have users in some departments who may approve hundreds of payments each week.
My suggestion would be to leave it like that. By all means put an option into the user decision to put it back or to 'un-reserve' it (and loop round if the user chooses it). That way you are adding value and not clicks.
Cheers,
Mike -
Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working
Problem : System Freezes frequently on any hardware scan or changes.
Symptom : Wireless Keyboard Mouse not working.
Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
Soultion : Please follow steps below
Step 1: Start > run > regedit
Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
This worked for me. Hope this works for you. Enjoy..!!Hi AshishSrivastava,
Thank you for your sharing and update.
Besides, I will change this thread type as discussion.
Best regards
Michael Shao
TechNet Community Support -
I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.
dont know what to do
Maybe you are looking for
-
How do I save an iPhoto slideshow on my macbook air externally?
I have a macbook air (no CD slot) and am unsure how i can save an iPhoto slideshow externally from my mac. In the past (on my packard bell laptop) I have always burned photos to a dvd and feel comfort knowing I have the pics externally if anything s
-
Acrobat looses windows focus after showing a wxWidgets modal dialog
Here's a code sample: AVWindow dlgWindow = AVWindowNewFromPlatformThing(AVWLmodal, NULL, NULL, gExtensionID, dlg->GetHWND()); AVAppBeginModal(dlgWindow); dlg->ShowModal(); // dlg is a wxDialog* AVWin
-
How can I dictate into my iPhone 5 instead of typing in email
How can I dictate into my iPhone 5 instead of typing in email ?
-
first time here, been reading the forum to see if anyone else has the same problem i have. i use windows xp and have a 5G video ipod. however, my problem is in the music store. for some reason, my itunes store will freeze up itunes (i'm thinking it's
-
I have donwloaded the IOS 5 can I use my Iphone 4 (GSM) as a personal hotspot? I have tried to go to settings then Network but I could not find it