Change authpassword;oid and authpassword;orclcommonpwd with ldapmodify ?
We have an OCS 10g on SLES9 testinstallation. Is it possible to change authpassword;oid and authpassword;orclcommonpwd in OID with ldapmodify ?
Regards, Karsten Schnebel
Depending on what you are trying to do, if you change the "userpassword" attribute the authpassword attribute is updated (it changes the user's portal password).
Similar Messages
-
Im registerd with Qatar store and now i want to change the same to india store.Do i need a seperate id for the same ? If so how can i do dat ?
you need to be running OSX 10.7 or 10.8 to use iCloud i believe. It shows you are using 10.6.8 which doesn't support iCloud.
-
Change IP-number and Subnet-mask with LabView?
To upgrade the software on a CRio-System, the user needs to change some settings in the TCP/IP-configuration.
To simplify this task I think on a possiblity to do (and at the end redo) the changes in the TCP/IP-Configuration of the Windows PC.
What I need is:
- Change the IP-Adress (from "Obtain IP adress automatic" to IP xyz...)
- Change subnet-mask
- Redo this settings by saving an existing config or set to "Obtain IP adress automatic"
Who knows if and how it's possible to do that in LabVIEW?
Perhaps I have to call a script /.bat-file?
LabVIEW 6,7 and 8 available :-)Sreedhar T wrote:
Hi, its a really interesting stuff to read. Did anyone try doing it ?
One thing that I wanted to know was: How long does it take to do this ? Since Im using a time critical application, can this entire operation happen in 100 milli seconds ?
Will be glad to hear from you.
Regards
Sreedhar
I have used this for a program that needs to have a host IP address for High sped cameras. I have it change the IP address to the required address and change it back when I am done. Here is a very simple Labview version of this code with out the switch back.
Tim
Johnson Controls
Holland Michigan
Attachments:
TCPIP Config Programically.vi 10 KB -
Color changes between CS2 and CS4 opacity with effects turned on
Howdie.
I don't run into issues much with Photoshop, and this one has me stumped.
I needed to drop back to CS2 in order to use a warp mesh plugin. I saved out a small portion of a file that I created in CS4 (Only containing the layer I needed to warp) and then opened that file in CS2, turned off all the effects (drop shadow, inner glow, bevel & emboss), and applied the mesh warp, then saved the file. I went back into CS4 and re-opened it there and copied its layers into the bigger, original file. What is strange is that the colors were a LOT lighter than they should be when compared to the original unwarped layer. So in an attempt to figure out what was wrong, I checked all of my layer opacities, filter settings, layer mixing mode, etc. and everything was exactly the same. I even tried deleting the layer style and copying the layer style from the original layer...no change. I turn off the effects and check the color of the object and it reads the same as the original layer. Both layers have no semi-transparency in the colors. I turn the effects on and it is all whacked out. After a while, I figured out that the problem was that the layer opacity in the effects, although reading the same between both layers (70%), is behaving as if it should be at 90% opacity in the new layer in order to match the original. Its as if the layer worked on in CS2 has brought with it some corrupted info in its definition, that never leaves and affects any Effects you try to apply to it.
Has anyone experienced this one before?A liitle bit more info here. Apparently, the pixel data for the warped parts screws with the effect, Inner Glow, in the Choke and Size sliders. The sliders simply quit functioning and have an abrupt light/dark toggle effect roughly near about value "7".
The only way I could fix the problem was to do this convoluted solution, since Duplicate Layer does not work.
1. Clear the effects on the problem layer.
2. At this point you can either work on the problem layer directly or duplicate it to create a work layer. Doesn't really matter because both layers will get deleted later anyway.
3. With Channel Mixer, and for EACH color channel CMYK, move all 4 sliders hard left, so that the result is 0/0/0/0 for the CMYK values (Do NOT use Brightness & Contrast in place of Channel Mixer because you will lose any blurred edges. Also, using Channel Mixer does not swell or choke off the pixels along any "floating" shapes' edges).
4. With the selection tool, create two small selection boxs at two opposite corners of the entire layer. Fill them with any color.
5. Select the entire layer (CNTL + A on a PC), and copy it to the clipboard.
6. Create a new Alpha channel and Paste. The little boxs at the opposite corners of the file were needed to precisely position a copy of the layer when we Paste it into the new channel. The contents of the channel must be exactly registered with where the original shapes were in the problem layer.
7. If you want, you can now delete the boxs in the corners of the channel by filling them with black.
8. Create a new layer and load the selection (the channel) we just created.
9. Fill it with the desired color.
10. Copy the desired effects from the original layer before warping was done and to the new layer we just created.
11. Delete the old problem layer.
12. Done. -
Changing which Resolution and Main Monitor With Applescript
Hi all,
I am trying to make an applescript to change my monitor settings.
I have 2 monitors the one I want to be my main one "E2370" and my second one "L2000CN" which I want to mirror the main one.
My main problem is that I do not know how to change the "Optimize for" combo box settings to E2370 on the event that it is not already set to that.
What I have so far is:
tell application "System Preferences"
reveal anchor "displaysDisplayTab" of pane "com.apple.preference.displays"
end tell
tell application "System Events" to tell process "System Preferences" to tell window "E2370"
try
click radio button "Arrangement" of tab group 1
on error
click radio button "Display" of tab group 1
--click the first combo box
end try
if value of checkbox 1 of tab group 1 = 0 then click checkbox 1 of tab group 1
do shell script "sleep 0.25"
click radio button "Display" of tab group 1
click radio button "Scaled" of radio group 1 of tab group 1
click radio button "Scaled" of radio group 1 of tab group 1
select row 3 of table 1 of scroll area 1 of tab group 1
do shell script "sleep 0.25"
keystroke (ASCII character 3)
keystroke (ASCII character 3)
end tell
--quit application "System Preferences"
Thanks in advance.
TrevorWhat format (codec) is the material being editied?
Sounds like you are editing a non-native format (something like h.264). If that is the case, convert it to ProRes LT and try again.
x -
Change First Load and Menu Disappear with scroll
Hello,
Im in a crossroad trouble and think that one of my problems is that i can resolve it changying the first load of my site and relink to one anchor link.
My other problem is that i want to recreate the behavior of the menu of this web http://www.smallstudio.com.au/ with no success, this disappear when scrolls the site.
Thanks for anticipate, im thinking that maybe can modify the html or do with Edge Animate, but maybe someone can help me because im walking in circles with this site.
Gracias!Thank you, knorretje. Had no problems with logging on 2003. Lot of lines, but I propose that critical part<br>
0[220f140]: nsHttpChannel::OnCacheEntryAvailable [this=3f6f400 entry=5236740 access=3 status=0]<br>
0[220f140]: nsHttpChannel::Connect [this=3f6f400]<br>
0[220f140]: nsHTTPChannel::CheckCache enter [this=3f6f400 entry=5236740 access=3]<br>
0[220f140]: nsHttpResponseHead::Parse [this=6b113c0]<br>
0[220f140]: nsHttpResponseHead::ParseVersion [version=HTTP/1.1 200 OK]<br>
0[220f140]: Have status line [version=11 status=200 statusText=OK]<br>
0[220f140]: ParseContentType [type=image/gif]<br>
0[220f140]: nsHttpResponseHead::MustValidate ??<br>
0[220f140]: no mandatory validation requirement<br>
0[220f140]: Not validating based on expiration time<br>
0[220f140]: nsHTTPChannel::CheckCache exit [this=3f6f400 doValidation=1]<br>
As I understand, all partial checks say that cache is good. But ending doValidation=1, probably, means that request will be sent. Do not see any reason. -
Lightroom changes file date and time
When I imported a large number of images to Lightroom, keeping the files in their original location, the dates and times of the files were updated. This is a bit of a pain because it means that about 4000 files will now be backed up again to the online backup service I use. Why does LR change the filedate when all it's doing is importing to the library?
> Alexander wrote: I believe you have set the option to "Automatically write changes into XMP" and are working with non-raw files (jpeg, tiff or dng)? In this case it is the expected behaviour as LR will write any metadata changes right into the files, thus changing the modification date of the image files.
Either uncheck the above mentioned preference setting or beg Adobe to bring us back xmp side car files for jpeg, tiff and dng.
No, I'm not stalking you :)
The following applies to Macintosh OS X, 10.4.8. I don't know if the same happens with Windows.
I had a similar problem when editing some JPEG file from my Fuji F30. When I would Export the metadata the 'Modified' date of the file changed as expected. However, for certain files, the 'Created' date also changed. I opened a case with Adobe, sent them a description of the problem and some sample files. The Technical Support person reproduced the behavior and passed the information to Engineering.
Yes, Adobe, give us XMP files for all files. -
No entry for authpassword;orclcommonpwd
Hello,
I installed OID version 10.1.2.1.0 and now I try to learn more about it (I am quite new to it). I created some users, but since today, the attribute authpassword;orclcommonpwd isn't set any more. A restart had no effect. I checked the policy and it seems ok to me:
cn=DefaultSharedPasswordProfileEntry,cn=Common,cn=Products,cn=OracleContext
orclpwdverifierparams;authpassword=crypto:ORCLIFSMD5 $ realm:Authorized_Users $ usernamecase:lower $ nodomain:1
orclpwdverifierparams;authpassword=crypto:ORCLWEBDAV $ realm:Authorized_Users $ usernamecase:lower $ nodomain:1
orclpwdverifierparams;authpassword=crypto:MD5
orclpwdverifierparams;authpassword=crypto:ORCLLM
orclpwdverifierparams;authpassword=crypto:ORCLNT
orclpwdverifierparams;authpassword=crypto:ORCLDIRECTORYHASH
orclpwdverifierparams;orclpasswordverifier=crypto:MD5
objectclass=orclpwdverifierprofile
objectclass=orclcommonverifierprofile
objectclass=top
cn=DefaultSharedPasswordProfileEntry
orclcommonverifierenable=1
displayname=Default Shared Application Password Profile
orclappid=orclcommonpwd
Has anybody an idea why I don't get orclcommonpwd any more?
HildegardHi even i am aslo getting the smae problem. kindly let me know how to solve this issue.
Thanks
Chandu.. -
Users dn changes in AD, OID and portal
I have some question about dn changes...
we have a synchronized Active Directory with OID. When user's dn changes in AD, it changes in OID.
We using portal API (wwsec_api, wwsec_oid) functions for managing user... such as set his default group, add/remove to/from group and others.. After user's dn have changed these funtions not working for that user.
so.. here comes my questions:
these portal API functions uses dn from table portal.wwsec_person$ ?
if so, is there a way to update dn in this table when it changed in OID automatically? Or it can be done only manualy?
is it safe to update dn in this table?
thanks for any hints.
sharthank you for response.
as I'm new to synchronization, some questions comes because of not knowing something..
Now I see that all changes in portal are made just after the user logs in. That was the problem. -
I not so recently changed my email adress I associated with my Apple ID and my iCloud ID. My old email still shows up for iCloud, and won't let me change it to my new email. When I try to delete it and replace it with the proper email, it wants my password, which it won't accept because it's an invalid username.
I had this same issue and got it resolved very simply when I contacted Apple SUpport
Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and sign into your infomation
> Go to Manage apple id and primary email address
> Change it to the old apple id that your device is asking for
> Save changes
> Go to Settings > iCloud and sign out of the infomation
> Go back to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
> Change it back to the correct apple id
> Go to the email address adn reverify the apple id
> Sign back into iCloud on your device
> Smile
Article to back up my statement http://support.apple.com/kb/TS5223 -
I have most of my music stored on my old iphone. i bought a new I pad, and signed up with a new e mail adress as my old one is defunct. How do i change my e mail adress to the new one, because it keeps telling me apple id already in use.
You can change the primary email address on an account by logging into it via the 'manage your apple id' button on http://appleid.apple.com, or via the Store > View Account menu option on your computer's iTunes, or by tapping on it in Settings > iTunes & App Store on your phone and logging into it.
You won't be able to change it to an email address that is being used an alternate or rescue email address on the account (they can be viewed/changed/removed via http://appleid.apple.com), nor to one that is currently being used as the primary email address on an account -
I have duplicates of all the songs on my windows 7 computer. I changed computers and ended up with duplicates of all of my songs. How can I delete them all without having to do it one at a time? thanks!
Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
tt2 -
how do i stop my itunes from changing the location of my itunes media. i have it saved on a external HD and it keeps changing back to my local drive with out being told
No, an external drive will not always be mounted. If the drive goes to sleep, it can unmount, or it may unmount for other reasons. As Chris said, confim that the drive is mounted and active before launching iTunes.
Regards. -
I am trying to add another e-mail address to FaceTime, but do not want to change the e-mail address associated with my Apple ID. Everytime I try to add the e-mail address in my FaceTime settings, it send me a verification e-mail asking me to verify that I want to change to this new e-mail address for my apple ID. I do not. I just want to have an additional e-mail address for people to contact me via FaceTime. Does anyone know how to do this?
You can have multiple addresses associated with your apple id. You will have to verify any changes before they can be added and this is done by sending you an email. This is to protect you from someone else makeing changes to your account.
You can make any changes and view all your info here:
My Apple ID
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ -
My old nternet account was cancelled and with it my emails. I updated my apple id and password in all my devices (ipad, iphone, imac, except for my moms iphone. I am trying to log out from my old account and set her up with her own apple ID and iCloud etc but it does not let me log out. I have a notebook with all my passwords in it so I know for a fact the password for the old ID/ email is correct yet a window keeps popping up that it is incorrect. I have spent hours reading and trying to fix it myself and nothing is working, same window keeps popping up. Any ideas on what to do? I have an iphone 4S, all software up to date and I made sure my moms phone is also updated. Thank you, any help is greatly appreciated.
Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe
Maybe you are looking for
-
FCP 7 won't launch if Airport is off
Just noticed this. FCP 7.0.1 crashes on launch if Airport is turned off. Crashlog didn't give me much. Not a major problem, just weird...
-
Process for batch level at plant level
Folks, In case we have set batch level at plant level, how does the system reacts in case of an STO? I.e. I ship batch 1 for material 1 from plant A to plant B. In plant B, this batch might already exists as the level of batches is on plant level. HO
-
Reading data from flat file in aplication server
hi all, can any body provide code how to read data from flat file which is in application server. thanks in advance
-
Email photo attachments are getting visually compressed in the vertical. Cause?
My Email photo attachments are getting visually compressed in the vertical. Squashed as it were. Does anyone know thw cause?
-
How to develop forms using TEMPLATE.fmb
hi, Anyone Should suggest me clear tutorial/links to learn forms development using TEMPLATE.fmb with step-by-step development procedure including forms development, register in apps. Thanks in advance.