Change avi file to mov. for use with nuvj video mixer

I have avi. files on my hard drive c that come up on quicktime. I choose "file", export to quicktime, Ichoose options and choose jpeg which is the recomendation of nuvj (they require mov.jpeg files to play music videos). But when I try to play them they only run for 2 seconds with only the player showing. I am new at this any help will be greatly appreciated!!

This may assist:
http://www.divx.com/divx/mac/?hp3macmoreinfo

Similar Messages

Nike + for use with Ipod Video

can i use the nike + with my ipod video. i already have the nike 180 for use with the chip. i bought them because they were great runing shoes and just found out i could put the chip in them for $35. i have a video but not a nano aand i would really like to use the chip to track my progress. buying a nano would cost 200+ and i was just wondering if i can use it with my video. thanks

I'm sorry, but this doesn't make any sense. There are products made to run with iPod videos
It is what it is.
The Nike+iPod product is for the Nano only. Doesn't matter why.
If you know of other products that do the same thing as the Nike+iPod product, and it works for the 5th Gen iPod... then go buy one of those.
Then you go on to say that Apple isn't promoting the use of iPod video
That's not exactly what was said. The user who posted that indicated that Apple is only promoting the use of the Nike+iPod in conjuntion with the Nano.
Well, obviously, there isn't any harm for people to excersise with this product if there are accessories for that purpose.
Doesn't change the fact that the Nike+iPod product is for the Nano only.
If you have a suggestion for Apple, and would like to see the Nike+ product work with other iPods, then you can submit feedback to Apple here:
http://www.apple.com/feedback/ipod.html

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

I'm sorry, I have to convert the mov file. for use with fce and / or imovie11, better ProRes422 or intermediate codec?

FCE only used AIC for HD.
Al

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?

I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

First, back up all data and then uninstall "DivX" according to the developer's instructions.
Then try this:
VideoLAN - Download official VLC media player for Mac OS X

Problem-Starting InDesign Server for use with CORBA / Java and IOR file not generated

I'm trying to start Indesign Server cs3 for use with Corba, as per the document the server should generate the start-up message like this..
InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
[server] Writing IOR to ... and it should generate the IOR file
but I'm getting the usual start-up message and the IOR file is not generated, I hope IOR file is required for Java component interaction with IDS, kindly help me to solve this.
Thanks in advance.

[From Susan Doan, who is having trouble posting to the forum today}:
It looks like the example command line in the "Intro to InDesign Server" pdf is using curly quotes instead of straight quotes. If you copy the command from the pdf and paste it in your command shell, it won't work because of the curly quotes.
You can run the command without the quotes as Rich has said, but, as will all command lines, if your path contains a space, you will need to put quotes (straight ones!) around the path.
Thanks,
Ole

How do I export v-card formatted files for use with either Numbers or Excel?

How do I export v-card formatted files for use with either Numbers or Excel?

Did you open Automator and just look around?
Actions are listed in the left pane.
You drag them into the workflow on the right in the order you need to process the items that you want.
If this is a on-off requirement, just make a Workflow. If you plan to use it often, make it an Application.
If you want to select the contacts you want to export, use a get Selected action. You'd then select the contacts in Contacts App before running the workflow.
I'm not on a Mac to take screenshots, so you'll have to look at Automator's help or google for more info.

Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

Just downloaded latest updates to Camera Raw for use with my new Sony RX100 M3 but still can't get the RAW files to open. Any suggestions?

Never mind, I finally got it working, thanks!

Mac Book Pro 2010- how do I change MPG files on desktop to use on I Movie

I have a MacBook Pro 2010 - how do I change MPG files on desktop to use in IMovie

Transfer the movie from your iPad to your MacBook then. =)
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296

How does one transfer CS5 actions for use with CS6?

CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS. The "actions" folder in application support/adobe in my library is empty, and has always been so.
Only the CS6 default actions are located in the same folder for CS6.
I use imac i7, lion.
Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
Must i load each action into CS6, one at a time?
thanks to any and all.
vince

Re: how does one transfer CS5 actions for use with CS6?
On a Mac - There are multiple ways to do this. I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
1. You can load an action ONE AT TIME into your actions palette by:
     A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
     B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
     C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
2. TO MOVE MULTIPLE ACTION SETS AT ONCE
     A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
     B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
     C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace. I did this without an image open, I just dragged them onto the empty workspace. The actions should all appear immediately in the actions palette that is open.
     D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window. I just leave it, since I keep all my actions stored in the same file.
I hope this helps.
and I hope there are no typos.

No longer audio on .avi files when attempting to use Elements 9

I have compiled 20 years of videos from family videos and converted them to .avi files. I now want to edit these files into other smaller videos to give to my children. I have Premiere Elements 9. When I get one of these files using PE9 there is no longer audio on them.
There is audio if I play them on Windows Media Player but no audio on Quicktime Player.
I can edit in Windows Movie Maker but not in PE9.
The Quicktime Player states the following:
Format: Motion JPEG Open DML, 640 x 480, millions
Movie FPS 29.97
Playing FPS 29.97
Data Size 1.94 gb
Data Rate 8.67 mbits/sec
Normal Size 640 x 480 pixels
Current Size 640 x 480 pixels
I have a Dell Inspiron 530, 4.0 gb RAM, 32- Bit Windows Vista system. Plenty of Hard Drive availability.
I purchased PE9 because I thought it would be superior to Windows Movie Maker. Very frustrated.

Hi Bill,
The .avi file is a compilation of videos from multiple cameras from over the years. There is no 1 camera. That is why I am confused here.
Carmen
Date: Wed, 7 Mar 2012 10:08:25 -0700
From: [email protected]
To: [email protected]
Subject: No longer audio on .avi files when attempting to use Elements 9
    Re: No longer audio on .avi files when attempting to use Elements 9
    created by Bill Hunt in Premiere Elements - View the full discussion
What camera produced the MJPEG files, wrapped in the AVI container? The reason that I ask this, is because camera mfgrs. love to tweak CODEC's, and some take that tweaking to an extreme. If you have the utility disc, that came with the camera, it is probably best to install their particular version of the MJPEG CODEC. The Morgan, or the MainConcept might work OK, but having the exact version, from the camera mfgr. will get you as close, as is possible, and will save having to buy an MJPEG CODEC, that might not be perfect. Now, on that utility disc, one might have one of three possible choices: The MJPEG CODEC might be a separate installationThe MJPEG CODEC might install along with the camera's driverThe MJPEG CODEC might install with an included editing/cataloguing program (most common nowadays), and even if you do not use that utility, having the proper version of the MJPEG CODEC installed on the system, will get you as close, as is possible Good luck, and let us know if you have the utility disc for that camera. Hunt
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4251352#4251352
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4251352#4251352. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

What is the best software to use for screen capture on a PC for use with FCPX?

What is the best software to use for screen capture on a PC (windows 7) for use with FCPX? I've tried Camtasia and camstudio however the avi files cannot be imported by FCPX and the mov files produced by these programs are shown as just black screens in FCPX.

I use to face this issue every now and then (as a freelancer) when I use to cut on FCP7.
if the material is DV and was captured using Sony VEGAS, Premiere or Edius, the footage generally worked fine. You'll find most people will tell you to convert it regardless, however I found no issues working with them.
A problem you'll definitely face is HDV material. Most PC editing software write HDV in their own codec, which can't be read in FCP.
The only thing I can think of is to try converting HDV meaterial to QuickTime using something like MPEG Streamclip, or something similar.
Good luck

Convert mod files to mov for imovie

A helpful person on the forum suggested I use mod converter to convert mod files to mov for imovie. I have purchased the program from the internet but am having trouble getting them to respond with registration number so as I can get started. Has anyone had this problem or do you know the telephone number for emisoft which is who I purchased it from.

wuppet, it is unfortunate that this method did not work for you... I have tested this method my self with iMovie 08 & 09 with JVC .mod files.
I can really only suggest a few things:
1. Make sure that you are changing the .mod extension to .mpg, as I am sure that you did.
2. Attempt to get the originals from the camera, if they're still on the camera. I know that you say that they're the wrong format but iMovie 08 and 08 both support the .mod files found in JVC hybrid cameras. But make sure that iMovie is opened and running before you attach the camera to the Mac. Also make sure that the camera is set to "playback on PC" once you plug it in.
3. You can download the free VLC app, this will allow you to view the movies to verify that they're not corrupt somehow. You'll be required to change the extension to .mpg or .mpeg for this app to read the movies.
http://vlc.us.com/best-media-player/vlc-media-player.php?brand=vlc.us.com&s=goog le&c=vlcuscombm2_bingadm_CS_PG_XB_WB_ATSK&k={keywords}&pk=56-3

How can i export a 24bit avi file from photoshop for mac?

how can i export a 24bit avi file from photoshop for mac? i have a client that specificly needs the files to be avi and in 24bit what are the settings that i need to use to export the video using photoshop on a mac?

Hello,
To make a 24-bit AVI file in Photoshop, go to File>Export>Render Video. Then, under File Options, choose AVI from the Quicktime Export drop-down menu. Click the Settings button. Click the Settings button in the AVI Settings window. Change Compression to None, and then choose "Millions of Colors" from the Depth drop-down under Compression.
The Millions of Colors option is for 24-bit video (8-bit R+G+B channels, 8x3=24). Millions of Colors+ is for 32-bit video (24-bit video plus an 8-bit alpha channel).
-Brett

Change avi file to mov. for use with nuvj video mixer

Similar Messages

Maybe you are looking for