Change background problems

Hi all,
i've just installed leopard and i've a problem when i try to change the background image i've an error
..system preferences crashes..
Anyone have the same problem ? Any solutions ?
Thank you all,
Nicola

I have a similar problem.
I just installed an update for Leopard this morning.
After my system rebooted, my desktop background is blue as opposed to the picture I had it set at before the installation. When I try to change it, using either the system pref. tool or by clicking on the desktop and selecting "change desktop background", I cannot change it.
It does not crash or hang. When I select a picture or color to set it as, NOTHING changes. It's stuck on this boring solid blue. Help!

Similar Messages

Change Background in Menu Creation Encore CS4 and Photoshop

I am creating a menu using Encore and Photoshop. I Used the Encore Libray to create a blank background and also created a series of buttons adusting them in Photoshop CS4. However, when I try to change the background with a new jpg or psd file I open the picture in Photoshop but not as the new background layer I am trying to achieve. Can anyone tell me where I am going wrong?

Dear Bill,
Thank you for your prompt reply. However, I don't think I am explaining my problem correctly so if you have the patience I am sending you this little "Jing" movie which will show you my problem
http://www.screencast.com/t/YWI5MDcw
Regards
Stanley
Stanley Dalnekoff, President
HeritageVideo
70 Marvel Road
New Haven, CT 06515
Tel:203-397-0775-O
203-464-4975-C
www.heritagevideo.net
Date: Fri, 30 Jul 2010 12:39:20 -0600
From: [email protected]
To: [email protected]
Subject: Change Background in Menu Creation Encore CS4 and Photoshop
There should be no problem when adding the image of your choice, with Edit in Photoshop.
When you choose Edit in Photoshop, several things happen:
1.) a TMP PSD for that Menu is created.
2.) links are created between En and PS
3.) PS is launched, and that TMP PSD is then Opened in PS.
When one has edited that TMP PSD in PS, they must do a Save to allow those links back to En*.
If you are doing a Save_As, or Save_As_a_Copy, those links will NOT be followed, and the Menu will NOT update in En.
Good luck,
Hunt
I have encountered some instances, where a single Save does not follow those links. With experimentation, I have found that 3 Saves (Ctrl+S) will force those links to be followed, and the Menu updated in En. Not sure why this happens sometimes, but 3 seems to be the "magic number," at least for me.
>

Hover over image will change background color and size since IE8

Hello,
I have a problem that only occurs in IE8 without compability view.
I have in CSS set all textlinks to change background color on hover.
Now my sliced imageslinks also change background color and for a larger background area than the actual image.
It filles out the area outside the sliced image.
This hasnt happened before in any other versions of IE and it looks fine in Firefox.
Please can some one help me !
I have been searching net for hours.
I tried to change the background color when hovering imagelinks. Maybe I did something wrong but it didnt help.
BR,
Peter

Noone that can give me a clue?
I have been trying to figure this out all day

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Thanks

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Yellow on white is harder to read. Thanks

Another question. How do you bookmark something. It was so easy before, why did they change it? Can I uninstall it?

How to change background color in mail messages?

Capacity to change background colours seems to have been removed. Has anyone found where to do this please???

It's still available in Lion's version of Mail.
Open a New Message window in Mail. Then select Show Fonts from the Format menu.
In the Fonts screen, click the button for Document Color; a clor selection window will open. In that, choose the color you want for background.
Note - if you do this before entering any text in the New Message, you can save it as a Stationery item, which means you can select it from the Stationery menu in the future, saving many steps.

How to change background color in AutoComplete window ?

Is it possible to change background color in AutoComplete window ?

Bob, A.Ankit, you're both chasing a ghost here.
The screenshot shows an autocomplete enabled textbox with its dropdown list of autocomplete values to choose from. There is no property defining its backcolor. Not in the textbox nor in any class, neither any other baseclass nor _combobox of _base.vcx
The only way to chnage that color is not recommended, via changing windows theme colors. That would effect any window and control.
If you need another color even turning off themes won't help as VFP doesn't offer any property controlling that color, so you really would need to implement the autocomplete feature yourself, if you want the specify this backcolor.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH http://www.tmn-systemberatung.de

How to change background color in online editor

How to change background color in online editor

Jeff,
if you try to change all the plsql keywords to the same background color (that is not either white or black or blue) via the options panel in SQL Developer (Code Editor > PLSQL syntax colors), you will get the new background color in the worksheet only for the areas with plsql text, while the areas without any text will have the same background color as the base color scheme you started with. This means that there is no way to change the "general background" color via the options panel, but you have to use the same background color of one of the predefined color schemes.
This seems to me a bug, but probably it's not considered high priority, so it will not be fixed for the time being.
I would like to stress the fact that being able to change the color scheme of the development environment that you use every day about 8 hours a day can make quite a difference on your eyes at the end of the day.
Thanks,
Paolo

How to change background color in photoshop cs3

how to change background color in photoshop cs3
Please help me...

Background for what? You need to explain better and be more specific.
Mylenium

How to change background color of multilevel textbox in oracle form 6i

hi
How To Change background Color of the Text.
In One Multilevel Block 10 Record is Display At a Time in a Text Box (Name is AMTt)
This Text Box display , Buffer and Record Length is 10
In Case Of Amount is Less 500 then Text Color Is Red(Or Any) and In Case Amount Is More 500 Then Color is Green (Or Any).
Me Use This Code in PRE_RECORD EVENT
TCMTL is Block name
TCMTL_AMT is Text Box Name
if :TCMTL.TCMTL_AMT >5000 then
     g_fun.msgbox('Values is more');
     Set_Item_Property('TCMTL_AMT' , BACKGROUND_COLOR, 'r50g100b100');
else
     g_fun.msgbox('Values is Less');
     Set_Item_Property('TCMTL_AMT' , BACKGROUND_COLOR, 'r50g100b10');
end if;
but This Code Is Refer Only 10th Value and change color depend on value.
so
possible to Different color in One Block Text Box Then how?

DECLARE
     cur_itm VARCHAR2(80);
     cur_block VARCHAR2(80) := Name_in('system.trigger_block') ;
     BEGIN
     cur_itm := Get_Block_Property( cur_block, FIRST_ITEM );
WHILE ( cur_itm IS NOT NULL ) LOOP
          cur_itm := cur_block||'.'||cur_itm;
          --:global.VISUAL_ATTRIBUTE:= 'BACKGROUND_COLOR';
          --:global.VISUAL_ATTRIBUTE:= get_item_property(cur_block||'.'||cur_itm ,Background_Color);
          IF :TCMTL.TCMTL_AMT >= 500 THEN
                         Set_Item_Instance_Property( cur_itm, CURRENT_RECORD, VISUAL_ATTRIBUTE,'r50g100b100');
               ELSE
                         Set_Item_Instance_Property( cur_itm, CURRENT_RECORD, VISUAL_ATTRIBUTE,'r5g100b10');
               END IF;
                         cur_itm := Get_Item_Property( cur_itm, NEXTITEM );
               END LOOP;
               next_record;
END;
this is my in that how to set a VISUAL_ATTRIBUTE, and where to set so get a background color of text and change

Change background in forms 10g?

When we compile and run the form in forms 10g output is displayed. Can we change background? Can anybody help me to change the background in forms 10g?

see you /forms/server/forms.conf file that contains the virtual directories declared
# Virtual path mapping for Forms Java jar and class files (codebase)
AliasMatch ^/forms90/java/(..*) "D:\Oracle9i/forms90/java/$1"
# Virtual path for JInitiator downloadable executable and download page
AliasMatch ^/forms90/jinitiator/(..*) "D:\Oracle9i/jinit/$1"
# Virtual path for runform.htm (used to run a form for testing purposes)
AliasMatch ^/forms90/html/(..*) "D:\Oracle9i/tools/web90/html/$1"
# Virtual Path form images
AliasMatch ^/forms90/icons/(..*) "D:\Oracle9i/CGENF61\ADMIN\ICONS\PC/$1"
...you can create as many virtual directories as you want.
Francois

How to export PDF in Adobe Reader with changed background

Hey Folks,
I change background and text color by going to Preferences -> Accesebility and when I save the file with changed background it is still the old background. How to I save/export this PDF to have changed background?
Thanks a lot!
Krioni

Adobe Acrobat. A bit expensive just to change the document background...

How to change background images in s:application

hello!
i want to make a webside by flex4 as this web http://www.templatemonster.com/flash-cms-templates/29930.html
But i don't know how to make change background images by click and make sound when load page.
Can u help me ,please. sorry i write E not well.
Thanks so much
BUI THI PHUONG THANH- FROM VIETNAM

Hi,
please create a sink for your application inside that put your image.And apply that skin to your application on any click.
Below is the code.
Main Application
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/halo" xmlns:mx1="library://ns.adobe.com/flex/mx">
    <fx:Script>
        <![CDATA[
            protected function btn_click(evt:MouseEvent):void {
                this.setStyle("skinClass", MySkinClass);
        ]]>
    </fx:Script>
    <s:Button label="Change BackGroundImage" click="btn_click(event);"/>
</s:Application>
MySkinClass
<?xml version="1.0" encoding="utf-8"?>
<s:Skin xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:mx="library://ns.adobe.com/flex/mx">
    
    <fx:Metadata>
        [HostComponent("spark.components.supportClasses.SkinnableComponent")]
    </fx:Metadata>
    <s:states>
        <s:State name="normal" />
        <s:State name="disabled" />
    </s:states>
    <s:BitmapImage source="@Embed('image1.jpg')" smooth="true" left="0" right="0" top="0" bottom="0" />
</s:Skin>
with Regards,
Shardul Singh Bartwal

Pages 5 can't change background color in fullscreen

There's no option to change background color when in fullscreen mode anymore.
Did I miss something or did apple just...get rid of it?????why???

Hi, Mark,
Under the Format menu select Advanced and the click on Make Master Objects Selectable. Now click on the red area. You'll notice little faint x's at the corners. In the Arrange menu click on Unlock. Now you can edit the color. (In this case a gradient.) When you finish, go back and Lock it again and deselect Make Master Object Selectable.
Walt

Change background color in enter-query mode

Hi everyone,
I am trying to Change background color in enter-query mode in forms10g. I am using this
Set_Item_property('org.branch_code', BACKGROUND_COLOR, 'Green' );
Thanks

This is the code that allows to colorise items in enter_query mode, then de-colorize them after execute_query.
Assume that you have created a VA_QUERY visual atribute in your module.
-- Colorise in enter-query mode --
PROCEDURE Start_query IS
LC$Block      Varchar2(30) := Name_in('system.trigger_block') ;
LC$item       varchar2(60);
LC$itemdeb    varchar2(60);
LN$len        pls_integer ;
BEGIN
lc$itemdeb := get_block_property(LC$BLOCK, FIRST_ITEM) ;
lc$item := LC$BLOCK || '.' || lc$itemdeb ;
while lc$itemdeb is not null Loop
    IF GET_ITEM_PROPERTY(LC$Item , ITEM_TYPE) NOT IN ('BUTTON','RADIO GROUP','DISPLAY ITEM') Then
      IF GET_ITEM_PROPERTY(LC$Item , QUERYABLE ) = 'TRUE' Then
        set_item_property(LC$item, CURRENT_RECORD_ATTRIBUTE, 'VA_QUERY');
      End if ;
    End if ;
    lc$itemdeb := get_item_property( lc$item, NEXT_NAVIGATION_ITEM );
    lc$item := LC$BLOCK || '.' || lc$itemdeb ;
end loop ;
END;
-- Unclororize after execute_query --
PROCEDURE End_query IS
LC$Block     Varchar2(30) := Name_in('system.trigger_block') ;
LC$item     varchar2(60);
LC$itemdeb     varchar2(60);
LN$len          pls_integer ;
LN$Multi pls_integer ;
BEGIN
lc$itemdeb := get_block_property(LC$BLOCK, FIRST_ITEM) ;
lc$item := LC$BLOCK || '.' || lc$itemdeb ;
LN$Multi := GET_BLOCK_PROPERTY(LC$Block , RECORDS_DISPLAYED ) ;
while lc$itemdeb is not null Loop
    IF GET_ITEM_PROPERTY(LC$Item , ITEM_TYPE) NOT IN ('BUTTON','RADIO GROUP','DISPLAY ITEM') Then
      IF GET_ITEM_PROPERTY(LC$Item , QUERYABLE ) = 'TRUE' Then
         If LN$Multi > 1 Then
            set_item_property(LC$item, CURRENT_RECORD_ATTRIBUTE, 'VA_CURRENT_RECORD');
         Else
            set_item_property(LC$item, CURRENT_RECORD_ATTRIBUTE, '');
         End if ;
      End if ;
    End if ;
    lc$itemdeb := get_item_property( lc$item, NEXT_NAVIGATION_ITEM );
    lc$item := LC$BLOCK || '.' || lc$itemdeb ;
end loop ;
END;Francois

Change background color

HI guys,
I have a question:
In the Form 6I exists a Text Item with own scrollbar.
Are there any options to change background color on scrollbar attached to that item?
Thanks in advance,
John.
Message was edited by:
IMJL

In the Form 6I exists a Text Item with own scrollbar.If you rae talking about text item, you can set property word yes and vertical scroll = yes
For second question ,as Francois said, the answer is No

Change background problems

Similar Messages

Maybe you are looking for