Change Billing Date in Invoice cancellation document

Hello,
   I need to modify the billing date in a Invoice cancellation document from the defaulted billing date copied from the original invoice to the present date of cancellation. Can any one please suggest a user exit for that?
Thanks in advance for your help .

Hello Richard
    The problem with this exit is that I have already used USEREXIT_NUMBER_RANGE in a previous enhancement and as per its comment(shown below)USEREXIT_NUMBER_RANGE will not be triggered anymore if I use it.
If this userexit is active the USEREXIT_NUMBER_RANGE
is not processed anymore, that means this userexit has * priority.    
US_RANGE_INTERN - internal number
range     
*This form is called from form LV60AU02 and LV60AU11          
Thanks for your prompt reponse.

Similar Messages

  • How to change billing date in S1 - cancellation billing document

    Dear Friends,
    Could you please tell How to change billing date in S1 - cancellation billing document which is even not released to accounting & in gray mode.
    Is it possible?
    Thanks in advance.
    Ranjan

    Dear,
    Thanks for asking exact problem.
    1. PGI in 2008
    2. F2 Billing date in 2003 ( By mistake by the user)
    3. S1 Billing date in 2008
    4. PGI reverse in 2008 & OBD deleted in 2008
    So reduced billing qty is shown in report in 2008 because of S1 Billing date in 2008,
    Billing qty  is not matching with the actual PGI quantity.
    So here if the cancellation billing document S1 could be changed for billing date in 2008, then you could balance it
    Now my issue is how to balance it.
    hope you find it it very interesting
    Awaiting your response.
    Ranjan

  • Change Billing Date

    Is it possible to change the billing date?
    In my case accounting documents have got generated. out of which excise accounting document are auto cleared and financial accounting document is not cleared.
    What is the solution to change the billing date other then cancelling and recreating it?
    Regards,
    Hiren

    Hi
    you can do this by manually posting billing document to accounts. for this go to t-code VOFA and select your billing document type then go to detail screen, their is one indicator manual posting, mark it.
    Regards
    Shambhu Sarkar

  • Difference between Invoice cancellation document and credit note document

    Hello,
    Can anybody highlight the differences between an invoice cancellation document and a credit note document (may be point by point).
    I want to know their difference in SAP point of view.
    Thanks,
    Shankar

    Hi,
    Invoice Cancellation Document (VF11)
    This is basically cancelling-out an existing Invoice, completely.
    Whereas, Credit Note is basically setling down some part payment, which isn't being made or billed in excess to actual invoice amount.
    Example:
    Customer was supposed to be billed with Rs. 100 and got billed with Rs. 110. the payment recieved from customer is Rs. 100. to settle-down oustanding of Rs. 10, one need to create a credit note of Rs. 10 on customer-account.
    Best Regards,
    Amit

  • Want to change billing date but computer says no

    My billing date for phone and broadband is the 6th of the month, with payment being taken around the 20th, which has been fine up until now. However my employer has now changed my salary payment date and I'd like to change the bolling date so that the payment isn't taken until after the 1st.
    Firstly, why is it seemingly impossible to email anyone to ask about this? All the "contact us" links just take you back to a phone number and I'm at work during the non-automated times so it's not easy for me to make a call.
    Anyway, make a call I did, spoke to somebody in the call centre, tried explaining the situation, but they only seemed to hear the "change billing date" part and didn't seem the least bit interested in the whys and wherefores, then it was just a case of "computer says no, is there anything else I can help you with"
    I can't see why this is such a big problem. It's not like I'm asking not to pay or anything, I know that the first bill after I changed dates would be higher, because it would cover an extra couple of weeks, but I don't see why it's beyond the realms of possibility to put the bill date a couple of weeks.
    I managed it with my mortgage, which is considerably higher than my BT bill
    A quick email to the mortgage company, had a letter back a couple of days later confirming the payment date had been changed and the first payment on the new date would be an extra £xxx to cover the difference, all sorted no problem. Why do BT make things so difficult?
    Solved!
    Go to Solution.

    Try as I might, there seemed to be absolutely no option to change "whole bill direct debit" so I can't quite see how you can do it online, the only option I could see was to set up a DD, but I've already got one.
    Anyway, all sorted now, thanks to a 5 minute online chat. I'm now swtiched to a MPP, which is for give or take a few pence, exactly the same as my monthly bills have been and instead of my next payment being taken on the 20th of this month, it's now going to be taken on the 2nd of next month and every month thereafter, which is exactly what I wanted to do.
    Quite what the difference between whole bill monthly and MPP, I'm not quite sure but it's sorted

  • USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT

    Hi,
    Pls advise any USER EXIT FOR CHANGING POSTING DATE IN THE MATERIAL DOCUMENT.
    Regards,

    Hi,
    There is another user exit for updating material document data Upon posting  is MB_CF001
    I hope this will fullfill you.
    Prem

  • Change Billing Date in Billing Document

    Hi,
    I want to write a program to automate Changing Billing Document.
    Currently, I do it manually :
    vfx3 -> select the billing doc which needs to be changed -> change billing doc (shift + f8) -> Go To -> Header -> Header -> manually change the billing date here -> save it.
    Do we have a function module/ bapi for this?

    Go to transaction SE37 and type in, for example, BAPIBIL, then click on the drop-down. See the whole bunch of BAPIs? I guess that
    BAPI_BILLINGDOC_EDIT might be the right one, don't you think?

  • Change Billing Dates

    Is it possible to change the billing dates?
    I would like all subscriptions and services I bought to be on the 2nd of each day.
    Even if I lose a month it would be fine.
    I can't cancel since a lot of them are 3, 6 or 12 month subscriptions.
    How can I change this?

    Hi I tried this but it won't pull up my invoices I think that they are completed but still open.  They won't post because they are posting back over four periods that are closed.
    The lines have a status of C for completed but when I check the header document flow I can see they are all still open.
    I can see that changing the billing date to Today in VF02 will allow them to post but I don't fancy changing the date on 4000 of them!
    I'm starting to think LSMW.....

  • Event to change Posting Date in invoice (ERDK table)

    Hello,
    We are using events R402 and 0062 to change the posting date, which works fine for FICA, but does not change the posting date in Invoice document.
    I was trying to find an EVENT to change the BUDAT posting date on Invoice (ERDK).
    Thanks.

    To handle this requirement you can use FICA Event R999.
    In this event you have access to the whole Print Document object which contains the billing documents that makes the invoicing unit (print document), the posting date and the scheduling date.
    Regards,
    Siva

  • Profit center document is not created for invoice cancellation document.

    Hi all,
    when i create the invoice, Profit center document is getting created,
    where when we try to create a cancellation document for the same invoice, Profit center document is not getting created,
    can anybody let me know where can i check this problem??
    and can u let me know Profit center document creation is dependent on BILLING DOCUMENT TYPE?
    Thanks in advance,
    Krishna Dussa

    Hi Krishna
    First of all Check wheather Profit center is there or not in the Material master record when you are cancelling the billing document..If it is there then with the help of your ABAP team ,ask them to debug by putting once you run VF11
    Regards
    Srinath

  • Billing Date causing Invoice Split

    Dear SD Gurus,
    In VTFL, I'm using value "011 - Bill. date= Today" in field "Data VBRK/VBRP" to skip/avoid the billing date as the criteria that causes invoice to split.
    But the problem with this option is, I cannot do back posting. Whenver I change the billing date in the billing to previous date, it will still pick up today's date as the billing date, especially month end.
    Is there any other way to skip the checking? I need to back post the billing in certain circumstances.
    Thanks,
    Soo

    While doing the billing i.e. VF01, you can enter the billing date in the initial screen.
    Regards,
    GSL.

  • Change billing date for first scheduling period in VA41

    Hi,
    Requirment: At the time of Contract creation, the first scheduling period amount will be compared to a fixed threshold value. If it is less than that threshold value then change its billing date to next schedule period's billing date.
    I have tried so many user-exits but hey are not triggered at the required point of time.
    As soon as we create the contract the dates will be changed accordinly.
    Also do we have any function module to change date if we make a Z program.
    bye
    Divya

    hello,
    SDAPO001  Activating Sourcing Subitem Quantity Propagation
    SDTRM001  Reschedule schedule lines without a new ATP check
    V45A0001  Determine alternative materials for product selection
    V45A0002  Predefine sold-to party in sales document
    V45A0003  Collector for customer function modulpool MV45A
    V45A0004  Copy packing proposal
    V45E0001  Update the purchase order from the sales order
    V45E0002  Data transfer in procurement elements (PRreq., assembly)
    V45L0001  SD component supplier processing (customer enhancements)
    V45P0001  SD customer function for cross-company code sales
    V45S0001  Update sales document from configuration
    V45S0003  MRP-relevance for incomplete configuration
    V45S0004  Effectivity type in sales order
    V45W0001  SD Service Management: Forward Contract Data to Item
    V46H0001  SD Customer functions for resource-related billing
    V60F0001  SD Billing plan (customer enhancement) diff. to billing plan
    Badi's
    BADI_SD_SCH_GETWAGFZ Scheduling Agreement: Read WAGFZ from S073
    BADI_SD_V46H0001     SD Customer functions for resource-related billing
    Thank u ,
    santhosh
    Edited by: santhosh kumar on Feb 9, 2009 7:59 AM

  • The way do not change billing date in VF01/VF04

    Hi Dear.
    I hope to solve my problum.
    As I know...In Standard, When create a billing document, Goods Issue date is copied automatically. And user can be change the biling date.
    But sometimes GI date has a diffrent month to billing date by user's changing. So I want know the way not to change the billing date when make a billing document in VF01/VF04.
    How can I do it?
    Thanks for your answer!

    Hi,
    Check this userexit USEREXIT_NUMBER_RANGE_INV_DATE
    Regards,
    Saurabh

  • Cannot change posting date of a parked document. See addt'l details inside

    Hello again SAP experts,
    I was just wondering how come I cannot change the posting date of a parked document. The document type of the said parked document is a "BATCH INPUT" only document type.I already set in config that the posting date be changeable for parked docs.
    Is it not possible to change the posting date even if the status is only parked? Our client requires that the posting date still be changeable for BATCH INPUT only doc types. Please help.
    BTW, listed below is the error message that the system displays. Thanks
    Document type AA only defined for batch input

    Hi Loong,
    First and foremost, thanks for your time answering my queries. =)
    Going back to the topic, the OB32 suggestion didn't solve the issue. I added BKPF-BUDAT in the list, and made sure that it applies to all account types. I also tagged it as changeable field.Still, the system displays the error Document type AA only defined for batch input
    Is there such a rule that for doc types that are tagged as for BATCH INPUT only, you cannot change the posting date?
    Our client requires that the posting date still be editable.
    Please help. Thanks a lot!

  • Changing Billing Date

    Is there a way to change my billing date? Right now my bill is due five days before I get paid, which causes my bill no be paid late, which in turn I get charged a late fee.
    Thanks.

        Hi hgrubbs67! I know that you'd rather not have your bill due date occur before you get paid. Yes, it is possible to change your bill cycle date to reflect a different time of the month. I do want to advise you that to do so may make the first bill appear to be larger than normal. Here's why:
    Let's say that your bill cycle date now occurs on the 20th of each month, but you would prefer it to happen on the 10th. So If we were to make that change today (the 25th), you would get a bill that was generated on the 20th and then another bill on the 25th! So please keep that in mind when requesting this change. If you like, I can assist you with this change to provide a more personalized explanation. You need only search for DionM_VZW and request to follow (and I'll send you a Direct Message) or you can contact Customer Care at 800-922-0204.
    Dion M.
    VZW Support
    Follow us on Twitter www.twitter.com/vzwsupport

Maybe you are looking for

  • Changing of Vendor Reconciliation Account in master

    Dear friends, I would like to know the steps of changing the Vendor reconciliation account in master. After changes whar are the steps to correct the Balance sheet accounts..?? We have already having existing in the old recon account I would like to

  • HT5093 Problem with camera in maya 2011

    why sometimes my model appears so small in the iBook app? I´m using maya 2011, openCollada exporter.

  • Issues embedding video

    Hey, Everytime I open a page and add a new video (from youtube)  using 'insert html snippet' the new video works when I publish but the exisitng videos on that page won't so I have to reinstall all of them each time. Also, I'm using Contribute CS3. D

  • Deleting Contacts on phone (but keep them on my mac)

    Is there a way to delete contacts on my iPhone but keep them on my Mac (Macbook Pro) or vise versa.  I use iCloud, so Im not sure.  Some people I no longer need to contact via phone, but would still like to keep their contact info, in case I ever nee

  • Telstra Velocity/NBN Super Fast Broadband Add On Error

    Have recently moved to a new address with Velocity enabled and the broadband was enabled on Friday. I want to enable the Super Fast Speed Boost and the option is there in my account, however when I go to add it I get an error "Sorry, there is an erro