Change BIOS battery for ThinkPad T30 (type 2366-81G)

Hi.
I need some help changing the BIOS battery on ThinkPad T3 (2366-81G). I have downloaded the hardware maintenance manual, but didn´t find the instruction I was looking for. It is the BIOS battery I need to change, not the backup-battery.

thorarnebakke, welcome to the forum,
the BIOS battery is referred to as the "Backup Battery" in most Hardware Maintainance Manuals.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

BIOS Update for Thinkpad (x121e) in order to make Sandisk Cruzer Extreme finally bootable?

Hello,
will there every be a BIOS update for Thinkpads (in my case x121e) so that it (the BIOS of the thinkpad) will finally be able to recognize and therefore boot from usb flash drives / sticks like Sandisk Cruzer Extreme???
(Once the OS is running, the drive is recognized just fine, but that's not what I'm here for.)
My old desktop pc from 2006 has no problems with such a "modern" drive, but my 5 years younger x121e isn't able to boot from that drive? Come on, Lenovo, you can do better, at least you should...!
I'm not sure, if that is the right place for such an inquiry, but as Lenovo apparently doesn't offer a proper support e.g. by email, I just try it this way. I once use the support by phone, only to find out that the lady on the other end had no clue whatsoever of computers and was just looking up answers in her system, which were, of course, not at all helpful.
So, for now, this is my only hope, that someone from the technical team at Lenovo reads this and gets the BIOS programmers to work...
Cheers,
Mike
[btw: I read about a similar entry where the guy finally marked his problem as solved just because he used another usb stick to boot the first one. That's not a solution, that's a work-around. I'm looking for a solution (= BIOS update), not a work-around!]

Hi, I have an x120e and when I get into the BIOS > Startup > Boot, I see the following list:
Boot Priority Order
1. ATA HDD0 Samsung SSD 830 Series (my main disk)
2. USB HDD SanDisk Cruzer Fit (a tiny usb drive that is always attached and holds assorted files)
3. USB CD
4. USB FDD
5. PCI LAN
The device can indeed boot from a USB stick. I think you will have to follow this order of events: first attach the USB you want to boot from, yet boot only from your main hard drive, to let the system recognize the attached USB drive and put it in the Boot Priority Order list, then shutdown, restart and get into BIOS. F1: to either to change the ordering in the list to put USB FDD or USB HDD SanDisk first) or F12 (I think): to choose a temp device to boot from. Or....... (another thought), the USB you want to boot from hasn't yet been made "bootable" (I think you may have to go into diskpart > etc to set it active) so isn't recognized in BIOS.
I've used a USB flash drive with my recovery partition on it to restore to factory state. That was also a Sandisk Cruzer USB. I've also booted directly into a WinPE sort of environment using another bootable USB made for the purpose of restoring from system images. Mine is an x120e; your x121e can't be much different.
Cheers!

Function module to change the value for pricing condition type

Hello experts,
I want to change the value for pricing condition type for an item in the transaction CRMD_ORDER.
I used many function modules but none are working.
Please kindly suggest a function module that will change the value for a condition type .
I have used the following function module but its not working, please correct the coding if anything needs to be changed or added. Please help me .
Thank you.
CLEAR PRCD_COND.
     SELECT SINGLE * FROM PRCD_COND WHERE KPOSN = WA_ORDERADM_I-GUID AND
                                          KSCHL = COND_TY.
IF SY-SUBRC = 0.
*    MOVE-CORRESPONDING PRCD_COND TO L_COND_CHG.
*    CLEAR L_COND_CHG-KBETR.
    L_COND_CHG-STUNR = PRCD_COND-STUNR.
    L_COND_CHG-KBETR = COND_PRC.
*    L_COND_CHG-KSCHL = COND_TY.
    INSERT L_COND_CHG INTO TABLE T_COND_CHG.
L_HEAD_GUID = CRMD_ORDERADM_H-GUID.
L_ITEM_GUID = WA_ORDERADM_I-GUID.
INSERT L_HEAD_GUID INTO TABLE HEAD_GUID.
INSERT L_ITEM_GUID INTO TABLE ITEM_GUID.
    CALL FUNCTION 'CRM_ORDER_READ'
     EXPORTING
       IT_HEADER_GUID                    = HEAD_GUID
       IT_ITEM_GUID                      = ITEM_GUID
     IMPORTING
       ET_ORDERADM_H                     = LT_ORDERADM_H
       ET_ORDERADM_I                     = LT_ORDERADM_I
       ET_PRIDOC                         = IT_PRIDOC_RD
       ET_DOC_FLOW                       = T_DOC_FLOW
*     CHANGING
*       CV_LOG_HANDLE                     =
*     EXCEPTIONS
*       DOCUMENT_NOT_FOUND                = 1
*       ERROR_OCCURRED                    = 2
*       DOCUMENT_LOCKED                   = 3
*       NO_CHANGE_AUTHORITY               = 4
*       NO_DISPLAY_AUTHORITY              = 5
*       NO_CHANGE_ALLOWED                 = 6
*       OTHERS                            = 7
    IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
MOVE-CORRESPONDING LS_PRIDOC_RD TO L_PRI_COND.
INSERT L_PRI_COND INTO TABLE PRI_COND.
LOOP AT IT_PRIDOC_RD INTO LS_PRIDOC_RD.
MOVE-CORRESPONDING LS_PRIDOC_RD TO L_PRIDOC_CHG.
L_PRIDOC_CHG-PRIC_COND = PRI_COND.
L_PRIDOC_CHG-REF_GUID = LS_PRIDOC_RD-GUID.
L_PRIDOC_CHG-COND_CHANGE = T_COND_CHG.
INSERT L_PRIDOC_CHG INTO TABLE PRIDOC_CHG.
ENDLOOP.
LOOP AT LT_ORDERADM_H INTO LS_ORDERADM_H .
MOVE-CORRESPONDING LS_ORDERADM_H TO L_HEADER.
INSERT L_HEADER INTO TABLE HEADER.
ENDLOOP.
LOOP AT LT_ORDERADM_I INTO LS_ORDERADM_I.
MOVE-CORRESPONDING LS_ORDERADM_I TO L_ITEM.
INSERT L_ITEM INTO TABLE ITEM.
ENDLOOP.
L_FIELD-FIELDNAME = 'STUNR'.
INSERT L_FIELD INTO TABLE FIELD.
L_FIELD-FIELDNAME = 'KBETR'.
L_FIELD-CHANGEABLE = 'X'.
INSERT L_FIELD INTO TABLE FIELD.
L_INPUT-FIELD_NAMES = FIELD.
L_INPUT-REF_KIND = 'E'.
L_INPUT-REF_GUID = LS_PRIDOC_RD-GUID.
L_INPUT-OBJECTNAME = 'PRIDOC'.
INSERT L_INPUT INTO TABLE INPUT.
    CALL FUNCTION 'CRM_ORDER_MAINTAIN'
     EXPORTING
       IT_PRIDOC                     = PRIDOC_CHG
     IMPORTING
       ET_EXCEPTION                  = EXCEPT
     CHANGING
       CT_INPUT_FIELDS               = INPUT.
    IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
REFRESH EXCEPT.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
    IT_OBJECTS_TO_SAVE         = HEAD_GUID
*   IV_UPDATE_TASK_LOCAL       = FALSE
*   IV_SAVE_FRAME_LOG          = FALSE
*   IV_NO_BDOC_SEND            = FALSE
*   IT_ACTIVE_SWITCH           =
IMPORTING
   ET_SAVED_OBJECTS           = SAVED
   ET_EXCEPTION               = EXCEPT
   ET_OBJECTS_NOT_SAVED       = UNSAVED
* CHANGING
*   CV_LOG_HANDLE              =
* EXCEPTIONS
*   DOCUMENT_NOT_SAVED         = 1
*   OTHERS                     = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK AND WAIT.

Hi,,
To be able to call a function module in an update work process, you must flag it in the Function Builder. When you create the function module, set the Process Type attribute to Update with immediate start
Alternatively u can use this function module.
CRM_STATUS_DATA_SAVE_DB
BAPI_CUSTOMERCRM_CHANGE (If u wish to use a bapi for this).
Also , Let me know what error you got when implementing other function module.Does the function module didnt return any error but still the value is not changed for pricing condition type?

Change pointer triggers for one order type but not for other with LOIPRO

Hi all,
We have old production order type ZP01 since last 3 years. Idoc LOIPRO are triggered properly. Now we introduced new production order type ZP02, but idocs are not triggereing for these prod. orders. They both are production orders with different order types but same message type LOIPRO
I noticed that change pointers are not getting written to CDHDR and CDPOS for this new order type. For old order type they are getting written to CDHDR/CDPOS. Does any one know where is the issue in config.
Currently BD52 contains following entries for LOIPRO
ORDER-AFKO-AUFNR
ORDER-AFKO-KEY.
Thanks in advance

Anyone with an idea.
The project went live by using RCCLORD or RCCLTRAN, but still the same orders keep triggering. How do we restrict the already processed production orders.

I need the mother board plug for the battery charger and Bios Battery for an XT178 Laptop?

HP xt178 Laptop (1P) F4685H SN: TW24604214
I need to replace the motherboard plug that the Battery Charger plugs into as it is broken.
The Bios Battery has failed and is NO: ML1220 with a number 28 in ink stamped on it.
are these parts available from HP or can you provide me with common part numbers.
Jack

Hey JD,
That's a reaalllllllllyyy old laptop. As an HP employee I feel obligated to recommend picking up a new one at your local retailer.
If you are serious about finding parts then you may be out of luck. HP stopped servicing that notebook in 2006.
http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=F4685H
-wes
I am an HP employee.

I just recently bought my macbook pro 13 inch with still a 1 year battery warranty. When I don't even use my laptop, it drains my battery 30%. Would apple change my battery for free if i have a 1 year warranty on it?

Do you think i should go to an Apple store to change my battery or go to the store where i bought it?

Your battery would slowly drain during any period of disuse even if it were removed from the computer and nothing were connected to it at all. A fundamental property of every battery is that whenever it isn't being charged, it's draining. If your compputer is shut down entirely, expect the battery to lose 0.5-1% per 24 hours without AC power connected. When it's sleeping, it will lose closer to 1% per hour. In either situation, leaving the AC adapter plugged in will prevent the battery from draining more than 5-7% in total before it starts to charge back up again.

CMOS battery replacement Thinkpad 1400 Type 2621

Hi
I would like to replace the CMOS battery on my old Thinkpad i Series 1400 type 2621. Can anybody help my how to find the CMOS battery?
Kind regards
Stodderen

Stodderen, welcome to the forum,
have a look through the Hardware Maintainance Manual for your system, it will give you all the information you need.
Page 75 of the pdf should be a good starting point
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

ID Window locking up when trying to change the occurrence for a Data type

These are the steps I take to get the issue.
Log into XI - ID.
Create new data type.
Insert a new element.
when i change the the pop-up window that lets me select the 0..unbound does not pop up, but it puts my main XI-ID window in the background which locks up my session. I have changed my java version on my PC and tried the following three versions (1.4.2_16, 1.4.2_18 and 1.6.0_11) none of them work.
Any help would be greatly appreciated.
Thanks
Skip Ford

Well, that trick only worked for ½ hour.
Or mayby something else triggered the intermidiate succes.
Still unsolved...
Edited by: Poul Bundgaard on Mar 18, 2009 9:22 AM

Purchase suggestions of new Battery for thinkpad X41

I could see that my battery condition is fair and can hold 40% of charge an dhave been use for almost 33 months. Now, I am planning to purchase a new battery and I could see one at ebay (new with 6months warranty) for onle 50$ where as at lenovo web site it is 169$ (new and i year warranty) and taxes extra. If I go for the ebay one, Will there be any probelm wiht the system? Or it is same as that of lenovo original? Only the draing time will be faster for the cheap one, I think!
Please suggest where to buy and te best deals
Thanking you
With respectful regards
Sarangi08

The quality of the these compatible cells vary, so you are buying at your own risk.

I changed my battery for my Iphone 4s today and everytime I put it on charge it reboots itself when the battery goes up

I'm not sure what do do, everytime the battery goes up my phone reboots itself, im not sure if its to do with my battery or the new charger or just my phone?

Check the USB port and the USB cable for any kind of lint, debris or bent pins.
Try another, working USB cable.
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support

Bios update for thinkpad edge 320 seems impossible

hi,
i tried to update my bios, because the current version will hardblock wlan after standby.
flashrom doesnt support the laptop. there are no BIOS executables(just win exe and an .iso with .img in it).
i also tried this: https://wiki.archlinux.org/index.php/Th … IOS-Update:
but the laptop fails booting from my usb sticks even though i could install arch linux from one of those usb sticks.
after i select the usb drive the screen flashes shortly and I'm back where i can select my boot device.
both USB-devices can be booted from a different laptop. wtf?
not sure if dumb or just trolling........
help appreciated
/edit
did it once again (exactly like the 525364 times before) and it worked..........
*rolls-eyes*
Last edited by b0b2 (2012-01-09 14:58:46)

txus wrote:3. Wifi hardblocking: This one was tricky. Apparently the Lenovo implementation of UEFI is faulty, and you can't modify the UEFI boot manager, because if overwrites other parts of the firmware. When you install grub2-efi and install it with grub_efi-install (or similar, don't remember the exact command) you create a new entry in the UEFI boot manager, and same happens if you follow the grub2 wiki page where it uses efibootmgr. Assuming you have followed the wiki and your directories are the same, you will have to boot my copying your "/boot/efi/efi/grub/grub.efi" to "/boot/efi/efi/boot/bootx64.efi". "Source": https://bugs.launchpad.net/ubuntu/+sour … omments/25
It is great to have confirmation that flashing the bios works using the usb key work around from think wiki. (I'm still not quite sure I follow it, though!)
I don't follow your third point. Are you saying that installing grub2 using efibootmgr, for example, causes the wifi to be hard blocked? If so, does upgrading the bios remove the grub2 entry and does keeping it unblocked require not reinstalling it?
My wifi is OK but my bluetooth is blocked (though it wasn't until a couple of days ago - it mysteriously unblocked itself a while after I'd given up and stayed like that until I had to restore the system from backup...). I don't see how the ubuntu bug you linked to supports the claim that "you can't modify the UEFI boot manager, because it overwrites other parts of the firmware", for example.
I don't deny the UEFI is buggy. It is for sure. I'm just not following the connections between the claims in your third point and the bug report. Copying grub.efi to bootx64.efi will not, I think, affect whether wifi is hard blocked! Copying that file is part of the standard installation procedure for grub2 - I don't think it has anything to do with the bugs in this firmware.
Last edited by cfr (2012-03-11 02:13:35)

To change vendor no for condition types using BAPI_PO_CHANGE

Hii,
how to change vendor no for certain condition types using BAPI_PO_CHANGE.
Is it possible .
Any parameter is there.
Plz help urgent
Title edited by: Alvaro Tejada Galindo on Jun 12, 2008 5:23 PM

Hi,
   It is possible.
wa_pocond-vendor_no = wa_konv-lifnr.
wa_pocondx-vendor_no = 'X'.
   wa_pocond-condition_no = wa_konv-knumv.
    wa_pocond-itm_number = wa_konv-kposn.
    wa_pocond-cond_type = wa_konv-kschl.
    wa_pocondx-condition_no = wa_konv-knumv.
    wa_pocondx-itm_number = wa_konv-kposn.
    wa_pocondx-cond_type = 'X'.
    wa_pocondx-change_id = 'U'.
    APPEND wa_pocondx TO it_pocondx.
    CALL FUNCTION 'BAPI_PO_CHANGE'
      EXPORTING
        purchaseorder                = wa_konv-ebeln
      POHEADER                     =
      POHEADERX                    =
      POADDRVENDOR                 =
      TESTRUN                      =
      MEMORY_UNCOMPLETE            =
      MEMORY_COMPLETE              =
      POEXPIMPHEADER               =
      POEXPIMPHEADERX              =
      VERSIONS                     =
      NO_MESSAGING                 =
      NO_MESSAGE_REQ               =
      NO_AUTHORITY                 =
      NO_PRICE_FROM_PO             =
    IMPORTING
      EXPHEADER                    =
      EXPPOEXPIMPHEADER            =
     TABLES
       return                       = it_return
       poitem                       = it_poitem
       poitemx                      = it_poitemx
      POADDRDELIVERY               =
      POSCHEDULE                   =
      POSCHEDULEX                  =
      POACCOUNT                    =
      POACCOUNTPROFITSEGMENT       =
      POACCOUNTX                   =
      POCONDHEADER                 =
      POCONDHEADERX                =
       pocond                       = it_pocond
       pocondx                      = it_pocondx
      POLIMITS                     =
      POCONTRACTLIMITS             =
      POSERVICES                   =
      POSRVACCESSVALUES            =
      POSERVICESTEXT               =
      EXTENSIONIN                  =
      EXTENSIONOUT                 =
      POEXPIMPITEM                 =
      POEXPIMPITEMX                =
      POTEXTHEADER                 =
      POTEXTITEM                   =
      ALLVERSIONS                  =
      POPARTNER                    =
      POCOMPONENTS                 =
      POCOMPONENTSX                =
      POSHIPPING                   =
      POSHIPPINGX                  =
      POSHIPPINGEXP                =
      POHISTORY                    =
      POHISTORY_TOTALS             =
      POCONFIRMATION               =
    COMMIT WORK AND WAIT.

Error in attribute changes for a doc., type

Hii experts,
I'm trying to change the attributes for a doc., type DF and while i'm saving i'm getting an error
Doc., type AN: number range is used for ledger Z1 withdoc., type Z1
Doc., type EU: number range is used for ledger Z1 withdoc., type Z1
Doc., type EX: number range is used for ledger Z1 withdoc., type Z1
Doc., type KN: number range is used for ledger Z1 withdoc., type Z1
Doc., type ML: number range is used for ledger Z1 withdoc., type Z1
Doc., type NT: number range is used for ledger Z1 withdoc., type Z1
Doc., type RA: number range is used for ledger Z1 withdoc., type Z1
Can you please tell me what to do. I appreciate your help and points will be given

Hi,
Is this happening for all the types of Transactions like Sales, Service, etc.? Is that data that you are using is proper? And can you check if the countries are properly maintained in the system? Check if the country is a mandatory parameter or some country specific checks are executed in the system.
You can check for the countries in the System from transaction code - SPRO -> SAP NetWeaver -> General Settings -> Set Countries -> Specify Countries for mySAP Systems.
Hope this will help.
Thanks,
Samantak.

Wireless versus hardwiring for T61P + T30

I would like to share my HP Laser 1022 printer and 1.5 GB internet connection in my apartment. I am considering using either conventional cables or wireless to share these with my ThinkPad T61P Type 6460 RF7 and ThinkPad T30 Type 2654 91U, and would like to know what hardware (in terms of router, printer server, cards etc) I need to make them work?
Thankyou for your advice,
Philip

Ah, OK, thanks Jin.
Keith
Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

Help!!! please!!! sound gone after bios battery replaced

Somebody help me please... cant here any sound
I changed my bios battery to a new one
I have KT4V motherboard MS 6712 version10A
i installed windows xp
installed all new drivers (including sound drivers, Realtek AC97)
the window traybar is showing the volume and sound effect icons (nothing muted)
windows Xp stating that realtek AC 97 sound drivers are installed, enabled and properly working
I tried installing latest drivers from the web as well
but cant hear any sound
earlier it was ok .... i have installed and uninstalled xp many times previously and everthing was fine after installing drivers...sound was there
this time i have changed bios battery and set all configuration to default...
cant hear any sound from speakers/headphone
i shall really appreciate your help in this regard
Thanks

"I have tried the troubleshooter of Windows XP -> Help ... but to no avail"
Don't expect to find anything usefull there
"It seems that songs are playing when i open one in a player .."
Which player? What songs?{Not name but sound format used}
Type in run "dxdiag", then select "sound" tab and do "test".
Go to control panel, sound and multimedia, see if you can play the wav files from there. Make sure that properly sound device is used as playback if you have more than one
Run the mixer the check that speaker sets are configured properly, and there is not muted lines{master or wave volumes}
Do a sound test from there too if its available.
"- could it be with the sound output jack itself gone dead?"
Yes. Also is possible the sound card amplifier to be dead.{not jack problem}
"- how do I ensure that buying a new sound card is the only solution (I hate this idea), suppose the problem is with bios/ M/b ... then i would have wasted money as soundcard may not function too"
Well you can ensure that by dismissing other possibilities.
That's the simplest and best idea.{If the onboard sound is dead} External cheap PCI sound cost around 10$ and forget about the case.

Change BIOS battery for ThinkPad T30 (type 2366-81G)

Similar Messages

Maybe you are looking for