Change Browser zoom on load

My HTML Captivate module does not display correctly if the viewers browser is not set at 100% zoom. I am looking for a way to change the browser zoom level to 100%. I am willing to manually change the JavaScript or index.html. Anyone have a process for this?

You cannot change the users browser settings like that.
For accessibility reasons I don't know why you would want to.

Similar Messages

My browser will not load a page or update unless I am actively moving my cursor or typing. If I select a page and don't do anything then it doesn't load at all. I have no idea how this happened or how to fix it. Thanks.

My browser will not load a page or update unless I am actively moving my cursor or typing. If I select a page and don't do anything then it doesn't load at all. I have no idea how this happened or how to fix it. Thanks.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English
== This happened ==
Every time Firefox opened
== From the beginning

Some add-ons:
Default FullZoom: https://addons.mozilla.org/en-US/firefox/addon/6965 (I use this one)
No Squint: http://urandom.ca/nosquint/
Also:
http://support.mozilla.com/en-US/kb/Page+Zoom
http://support.mozilla.com/en-US/kb/Text+Zoom
http://kb.mozillazine.org/Browser.zoom.siteSpecific

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much

I downloaded Firefox 7 and when I click on the browser icon nothing happens, the browser does not load on desktop.I had no problems with Firefox 4 I had been using for several years and liked very much

Most people have no problems with installing firefox as an upgrade, but there are quite a few things that can cause problems. Please have a look at the articles
* [[software Update Failed]] <-- clickable link (blue ) --
* [[firefox will not start]]
* [[firefox does not work]]
Post back after you read them and say what you tried. Have you ensured you used an admin account, possibly needing to check the UAC setting, and that security software is not blocking the changes. You should certainly try starting in firefox's [[safe mode]] either from a menu/icon option or by holding the shift key as you attempt to run firefox.
Is the browser icon you see on the desktop, and a firefox icon ?

How to change default zoom in outlook 365 permenently

I use the preview/reading pane in outlook 365 and I can see the slider bar at the bottom where I can adjust the zoom. Problem is I have to enlarge it each time for every email I want to read. How can set this to something other than 100% and make it stick?
Also, sometimes I need to fully open an email an I have the same problem - text is too small. And this time no slider bar at the bottom. SoO I have to go up to and manually adjust the zoom that way. This is so frustrating and a big problem for me as I have
bad eyes. Can someone please tell me how to change the zoom permanently?

Hi,
Changing the zoom setting is not persistent for reading messages. To make the zoom level persistent, you need to use an add-in or a macro. See:
http://www.slipstick.com/outlook/adjust-outlooks-zoom-setting/
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

When changing "browser.newtab.url" is there any way to prevent the address bar from getting focus?

When I change "browser.newtab.url" to about:home and open a new tab, focus is set to the address bar not the search box on the firefox home page. The same thing happens if i change the url to google.com or another search engine. Is there any way to prevent this from happening.

Custom new Tab has a small bug if the start page is exactly the same as the new tab page. Then the focus of the start page is on the address bar. Just leave the "www." out in the startpage and use "www." in the new tab page then it works perfectly. e.g.
Startpage: google.com
new Tab page : www.google.com
Now the focus of the start page is on the search box.

ADF Table with browser zoom not working properly

Hi All,
I am using ADF Table to show data from database. I am using JDeveloper 11.1.1.4.0.
When user uses browser zoom functions (i.e. Ctrl + or Ctrl -) for zoom in or zoom out, The UI of Table disturbed and columns are not in line.
Here is the snapshot of disturbed table image http://i.imgur.com/07YfB.jpg
I have tested it with Firefox and Internet Explorer and in both the cases if you zoom in the columns are not in line anymore.
I have added *<accessibility-profile>large-fonts</accessibility-profile> into trinidad-config.xml* and
tried but it gives me the same result.( Reference Oracle Docs http://docs.oracle.com/cd/E16162_01/web.1112/e16181/af_access.htm#BEIDFIIB )
Can anyone suggest solution for how to solve this problem so that the columns will be is line when uses browser's zoom?
Thanks in advance,
Viral

Hi,
I am not using any kind of css for table.
It is default skin and defalut table properties that ADF provides.
- Viral

HELP !! I keep changing my zoom and I don't know how I did it. Can you help me learn how to fix it ?

I am trying to leave IE for Firefox, but am having some problems. This issue is that I keep changing my zoom and I'm not sure how I've done it OR how to undo it.
I also have secondary issue on bookmarks.

See also:
*https://support.mozilla.com/kb/how-do-i-use-zoom
*http://kb.mozillazine.org/Zoom_text_of_web_pages

We are facing issue to open a static form PDF in Chrome Browser , which is loaded using Adobe FormService.Able to open in other browsers but not able to open the static forms in chrome with LC 11.0 version

We are facing issue to open a static form PDF in Chrome Browser
, which is loaded using Adobe FormService.
Able to open in other browsers but not able to open the static
forms in chrome with LC 11.0 version
Below error message:
The document you are trying to load
requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
or your viewing environment may not be properly configured to use Adobe Reader.
For information on how to install Adobe Reader and configure your viewing
environment please see http://www.adobe.com/go/pdf_forms_configure.
Please let us know do we have any option for disabling
<NoXFA/> tag by calling formService. RenderPDF() method on adobe service
For dynamic forms its working by adding <NOXFA/> in
DDX xml . only for static forms its not working because we are not using
assembler service for this forms.
Please let us know how we can disable XFA in static forms??????????????????

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

How to change Print Zoom in IE ?

Hello all,
I got a special request when printing on Internet Explorer : I would like to definitely change the Zoom in adjustment in Print Preview of IE (I want to set it to 70% instead of 100%). I need to print pages with 70% adjustment, but every time I launch IE
again, the Adjustment zoom set back to 100% !
That's the setting in top of the page, which is set to "Shrink To Fit" in this example : http://www.eversity.nl/blog/wp-content/uploads/2011/07/IE_Print_Preview_blank_page.png
I know all values for these settings are in the Registry HKCU\SOFTWARE\Microsoft\Internet Explorer\PageSetup, but I can't find a value for the zoom. I only find
Shrink_to_Fit (Which I set to "no") and other values for margin (but it doesn't satisfy me).
Do you know if it's possible ?
Many thanks for your help !

Hi,
Changing the zoom setting is not persistent for reading messages. To make the zoom level persistent, you need to use an add-in or a macro. See:
http://www.slipstick.com/outlook/adjust-outlooks-zoom-setting/
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Media Browser does not load photos

iWeb media browser does not load photos. iTunes and Movies panels do work however.
I do have multiple iPhoto libraries, maybe that has something to do with it?

See this Apple doc ~ +"iLife: Cannot See iPhoto Files in Other iLife Applications"+:
http://support.apple.com/kb/TS1192
...this was from Apple's iPhoto RSS feed under "+Apple Support Knowledge Base"+ here:
http://www.apple.com/rss/
You can subscribe to any of Apple's RSS feeds via this free RSS reader:
http://www.newsgator.com/Individuals/NetNewsWire/
...or in Safari or Leopard's Mail app.

I have an older version of imovie. After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

I have a five year old version of imovie that generally works fine. However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom. Any suggestions?

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

Avoiding applet main window resizing when using browser zoom?

Hello, I haven a applet embedded into a jsp page into an APPLET tag, with a fixed height and width, same values as the JPanel has on the applet with all the elements inside of it, my problem is, that if I use the browser zoom, the JPanel respects width and height but JApplet window does not, and increases until I stop zooming the site, I'd like to avoid this, I already tried by setting these parameters on the init function on the JApplet class:
this.setSize(593, 468);
this.setMaximumSize(new Dimension(593,468));
this.setMinimumSize(new Dimension(593,468));
this.setBounds(0, 0, 593, 468);
this.setPreferredSize(new Dimension(593,468));
But it does not work, is there something like a this.setResizable(false) for the JApplet class? I understand that JApplet is a subclass of JFrame isn't? please, any idea would be highly appreciated, have a nice day!!

saman0suke wrote:
So far I have the layout as NULL,Java doesn't have a NULL. Presumably you have a null layout. Don't do that/ Learn how to use layout managers and maybe you won't have a problem with the container being resized.
db

My safari browser is not loading any thing after an update 5.1!! i had to create guest account to brows!! pls help ASAP!!

my safari browser is not loading any thing after an update 5.1!! i had to create guest account to brows!! pls help ASAP!!

my safari browser is not loading any thing after an update 5.1!! i had to create guest account to brows!! pls help ASAP!!

Change Browser zoom on load

Similar Messages

Maybe you are looking for