Change Business System

Hi Experts,
We have a Business System (SAP ECC) Bus_A pointing to SAP_A. So all my present objects (channels, Interface Determination, Receiver Determinations, and Agreements) refer to Bus_A in the Sender/ Receiver section.
Now there is a requirement to introduce Business System Bus_B pointing to SAP_B and all the Configuration objects should automatically point to Bus_B.
How should this be done? Please note I am not transporting the messages to any other server/ environment. The objects remain in the DEV system only.
Thank you,
Pankaj.

>
Pankaj Sharma XI wrote:
> Hi,
>
> There are many objects in Integration Builder which refer to Bus_A (may be around 200) I cannot create them! I am looking for some smarter solution (if it exists).
>
> Thank you,
> Pankaj.
I think there's no way....
You can define the BUS_B like a target system of BUS_A in sld configuration... but the BS change will be avaible only in TXT or PRD system...

Similar Messages

Change business system - how to modify (globally) all scenarios?

Hi,
In our dev box, we had a business system (R/3) called DV5. All of our integrations scenarios are base on that BS.
Now, the name has change to DVX. Is there a way (globally) to change all our scenario (sender/receiver agreements, etc) that are pointing to DV5 to the new one - DVX ?
Thanks !

Hi Aamir,
Well, this is exactly how we were envisioning the solution How ever, we were not sure if there was a way (in the Integration Builder or in the SLD) that would have done the job.
Thank reinforcing our thought!
A+

Changing Business Systems from Dev to QA

I am trying to transport Integration Directory (Configuration) objects from DEV to QA. Is there a way that I can define my business systems (or something else) so that when I import my ID objects into QA I do not have to go into the Communication Channels to change the sender(s) and receiver(s) of the interface from DEV business systems to QA business systems?

Hi Kirk,
I have not noticed this much, so I am bit doubtful.
It MAY be possible with below conditions
1) If you use CMS and have your transport groups enabled in SLD (for QA, Prod equivalent of Dev)
2) you use the same name for the receiver & sender adapters (common names across scenarios & servers)
3) you do the transport for the SECOND time
what i mean as second time is, suppose there is a scenario to the same business system and you are using a RFC adapter, (which was already configured for someother scenario in your QA)
with all these things, you may anyway have to ACTIVATE (but not configure) after the transports.
Hope this helps.
Regards
Vishnu

Changing Business System

Hi Experts!
What do I need to change in order for changing a Business System in an interface from one to another?
Here is a little more information. I have to change all our interfaces from one R/3 system to another meaning that sometimes the system is sending and sometimes it is receiving. The communication channel is alway using the IDoc Adapter.
I have considered changing the RFC Destination, but I don't like that solution since I will have a Business Systems called e.g. R3_1 but the RFC destination will point to R3_2. This will be very confusing in future maintenance situations.
What do you think?

I had to undergo this recently and the only option was to remove and recreate.
We had to do this for consistency as we are handing over to a different support team...
With Idocs, there were a few issues with adapter specific identifiers, so it was easier to take them out and start again.
Depending on the volume, this may not be a solution...

Change business systems name

Hello,
I am sure this question has already been asked but I can't find anything in the forums...
We have PI 7.0 SP13, and I would like to know if there is a way of renaming a business system without deleting/recreating it ?
Many thanks for your help,
Best regards,
GL

Guislain,
Do you want to re-name the Logical System name or Business System name?
raj.

Change Business System for Java Proxy Client

I have created Web AS Java business system for Java proxy.
Is it possbile to send message from client Java Proxy as another business system (Third party)?
For example to specify this system
MessageSpecifier messageSpecifier = proxy.$messageSpecifier();
messageSpecifier.setSenderService("MY_BUSINESS_SYSTEM");
proxy.$messageSpecifier(messageSpecifier);

Yes, it is.
That's the way to do it.
Stefan

How to change the ROLE: Integration server in business system in SLD

Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
Rehan

Hi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan

Dynamically change Receiver Business system in message mapping

Dear all,
I would like to change the receiver business system in the message mapping that is used in the interface determination. I do understand there is an enhanced receiver determination where I can use a mapping but that is not what I am looking for.
I think this should be possible if we can change the appropriate value in the SOAP(message) header.
Possible candidates I can think of by looking at the SOAP header in SXMB_MONI are
1. SOAP:Header- SAP:Main- SAP:Receiver- SAP:Service
2. SOAP:Header- SAP:OutboundBinding - SAP:OutboundBindingEntry - SAP:ToServiceName
Q1. Which one of the above is relevant while identifying the receiver agreement ?
Q2. What is the best way to access them from the mapping(preferably from a UDF) ?
Thanks in advance.
Cheers
danus
PS: I have tried to set "http://sap.com/xi/XI/System","ReceiverService" in Dynamic config & ReceiverService, BusinessSystemReceiver and ReceiverSystem in the Containers Transformation Parameters, but didn't get the expected result.

Chidambaram,
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
A typical usage case is if you do not yet know the names of the receivers at configuration time. In this case, you can define a mapping program, for example, which reads a list of receivers from a table or from the payload of the message at runtime.
Go through the following link:
[Receiver Determination enhancement|http://www.****************/Tutorials/XI/RecvDetermination/Enhancement.htm]
Hope your problem gets resolved.
Regards,
Kiran Bobbala
Edited by: kiran Bobbala on May 7, 2008 5:47 PM

Business system change - PI 7.0 to P 7.3

Hello Everyone
We are in the process of upgrading from PI 7.0 to P 7.3
Now we have two ports - meaning two sld - Different landscape
The objects reside in PI 7.0 - We have three business systems
on this Sld: say port 1000
DEV - ABCD000
In PI 7.3 : port : 2000
DEV - XYZD000
In PI 7.3
DEV - All the ID and IR objects of XYZD000 is copy from PROD - ABCP000 (PI 7.0)
now in DEV - XYZD000 all my Directory Objects are pointed to buisness system ABCP000.
I want in to point to XYZD000 automatically . I have more than 300 objects. so changing manually is tough task
We are on dual stack -
is there a possibilty on how to do this.. I am sure there should be some option .
migration tool - is not an option - tried that already

Hi Deepa - I don't think we have a way.. You have to create them manually.
As it's a production system copy,obviously all your connections points to that "P" system.
Morover i assume it would be your proper development system which will be used to develop& transport your objects so it's good to define the business systems again in SLD and configure the scenarios accordingly.
http://scn.sap.com/thread/3491372

How to change the system time in (E-Business Suite)

Hi,
I need to change the system timings in E-Business Suite.
My Database & Application is on different nodes..
How could i change system timings on both...
Thanks,
Alig

Alig,
Changing the OS date/time will have no impact on the data (except for the scheduled jobs at the database and the OS levels). As mentioned in the threads I referenced above, you have to stop the application/database, change the date/time at the OS level, and start the application.
The application is just an interface which connects to the database, so it gets all the data from the database server. However, if you want to change the date/time it has to be done on both nodes (stop all the services first as mentioned above).
Btw, what is the point of changing the date/time because of Ramadan? The business requirement of your client does not make sense (how does it differ from the application/database perspective if you start working at 9:00 AM instead of 7:00 AM for example)?
The steps in the document should be enough, and if you do not trust any of the replies here you could simply log a SR and confirm this with Oracle support.
Thanks,
Hussein

Change client in scenarios with SAP business system

Did you ever wonder how you can change the client of a Business System and it's related communication channels in scenarios that make use of SAP systems?
One might think that changing the client in the communication channel (sender and/or receiver) is enough.
Unfortunately this is not the case. If you change only the client in the communication channel you'll get the following error: "lookup of alternativeServiceIdentifier via CPA-cache failed for channel XYZ"
It took me a while to figure this out, but finally I got it.
Two options:
a) Either you create a new business system in the SLD and you restart the configuration of all your scenarios, or
b) You change the client from the business system in the SLD
I definitely didn't want to go for option 1, as it meant that I had to redo a lot of scenarios (sender agreement, receiver determination etc.). I would have lost significant time and the configuration work is subject to errors as well which would have meant retesting all of the flows.
Therefore I explain in this thread option (b)
SLD:
1) In the SLD in the Technical Systems area, create a new client for the Web AS ABAP system.
2) In the SLD in the Business Systems area, click on the system that is to be associated with a new client.
3) Click on the Integration tab
4) Change the associated technical system and choose your new client
remark: the name of the business system might be somehow misleading if you specified the client as part of its name.
Integration Directory:
1) Delete the Business System
2) Activate Changes
3) Import the modified Business System
4) Assign the new client to the communication channels related to the business system. (as the name of the Business System is still the same as before, the communication channels are automatically assigned to it)
5) Activate Changes

Danny
I would like to add two more things here -->
1) For Web AS ABAP Technical Systems, I would rather ask BASIS to execute RZ70 in order to create the entry in TS of SLD. This will list down all the client of the SAP server.
2) If the Business System name you created is not client specific like
SCP400_Tst /// Client specific name
SCP_Tst /// Not client specific name
I mean if the Business System name is not client specific then no need to delete the Business System just go for
Service ( Edit Mode ) --> Adapter Specific Indentifiers --> (click button ) Compare with SLD & then Apply button
And activate the changes.
Rest of the steps will reamin same as you mentioned.
- Lalit -

Business system Doesnot change while transporting

Hi All,
When Transporting my business system from DEV to QA, my business system doesnot change. I already checked in SLD that my DEV business system is pointing to the correct system in QA. Also DEV and QA are on one SLD only.
You guys will be highly appreciated.
Regards,
---Satish

You also have to make sure that the DEV/QAS Business Systems are associated to the respective DEV/QAS XI system. For that, open the BS in SLD, go to the "Integration" tab and check the "Related Integration Server".
Also, make sure that both the DEV BS & DEV XI are inside the same "DEV" transport group in SLD, as well as the QAS BS & QAS XI are both in the same "QAS" group.
Regards,
Henrique.

Change in Business System

Hi Friends,
I've done the change to an Existing Business System and saved.
How to know whether this change is reflected or not.
Next what all steps i need to take care..
please suggest.
Thanks in advance!!!
Best Regards
Prasad

hi,
Many Thanks...
I'm able to compare...and found that changes not reflected
I've chagned the Logical system name in the Business System and that chagnge is not reflected...in the ID buisness system...
If you have changed logical system name you need to clear sld data cache in ID and also check in the adapter specific settings of business system and synchronize with sld.
Please let me know how i can clear and do the above chagnes
Thanks a lot!!!
Awaiting your reply!!!
Regards,
Prasad

How to change R/3 System ID & Client values for a Business System in ID

I am a beginner in PI or XI. I am trying to modify R/3 System ID & Client# under Adapter Specific Identifiers of a Business System in ID. But both are in output mode and I tried to modify in SLD and then resynch at ID level, but I could not find a place where these parameters are specified for that Business System in SLD.
Please help me!

I have a Client 500 and R3 Server EN3 now these two things were already there on a Business System, but Admn did some thing on my test system and now we have another Business System pointing to TS of type WEBAS-ABAP and Admin assigned this same client 500 and EN3 server name in SLD to this new Business system, but as you know these changes will not reflect in my ID scenario automatically unless we do it manually with synchronization button under Adapter Specific Identifiers.
So my requirement is now to remove those values from the old BS and keep them or get them through synch for my new BS in my ID scenario, which I am not able to do it. The new BS is pointing to WEBAS-ABAP type TS but the old one I think it is now not pointing to any TS any more, it just left like a orphan with no technical System, I think Admn did some magic with bad practice, I believe.
HOw do I handle this situation?

Change the Releated Integration Server for all Business Systems

Hello,
follow Scenario:
We export the SLD entries from a Development System in a file.
Now we want to import the Entries in our Prod.-System, and we
have to assign (or change) to other Related Integration Server.
e.g. the esported Business System has in Development the
Related Integration Server D12, but in the Productive System we
need P12.
Is there a other possibility as to change first things first.
Thanks for your help.

Hi Stephan,
I think this is not the correct approach because development and productive systems are different. You must register your technical systems by means of RZ70 transactions. If you have two different landscapes (DEV, PROD) you must register on two SLD servers.
Doc about SLD: https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b09fe69e-46be-2a10-9fb0-9c11aeaa3557

Change Business System

Similar Messages

Maybe you are looking for