" change" button not visible in check status ?

HI,
We are under upgrade of SRM 4.0 to SRM 5.0 . In SRM 4.0 "change" button
is visible in check status even if shopping cart is under approval
state.
But in SRM 5.0 "change" button is not visible in check status if
Shopping cart is under approval state.
Please let me know if any one face this issue.

Hi,
Goto SU01 and fill in the user ID for which the button is greyed.
Navigate to role tab
Double click on the role so that the system opens transaction PFCG
Select the "personnalization" tab where you will find the WFL security... (don't remember exactly the name as i do not have any system right now)
This WF security has 4 level.
By default it is set to none
Select level 4 for maximum authorization.
Save, log-off from ITS access et relogon.
Then the button won't be greyed anymore
Kind regards,
Yann

Similar Messages

"change" button is not visible in check status ?

HI,
We are under upgrade of SRM 4.0 to SRM 5.0 . In SRM 4.0 "change" button
is visible in check status even if shopping cart is under approval
state.
But in SRM 5.0 "change" button is not visible in check status if
Shopping cart is under approval state.
for this i have raised OSS message. SAP replied that "please increase the security level of the buyer from 1 (= no changes
allowed) to at least 2 (=low)."
please let me know where exactly i can change this settings?
Thanks
Venkatesh P

Hi Venkatesh,
Steps :
1) Go to SU01 of the buyer
2) Go to Personalization tab
3) Double click on Personalization object key 'BBP_WFL_SECURITY'
You will get a pop up for 'Authorization level for Authorization'
4) Here change the securtiy level from 1(=no changes allowed) to at least 2(=low)
<b>Reward points for helpful answers</b>.
Regards,
Andy

SC still visible in check status even after GR and Invoice

Hello all,
We are on SRM 4.0 SP 4.0.
Normally SCs for which GR and invoice has been done should not be visible in the SC check status application if you dont select the "Include completed shopping carts". TBut in some cases though we have selected the "Delivery Completed" indicator in backend PO but still there are some shopping carts still visible in check status application in SRM. The values for the GR and invoice should have status of "Fully confirmed".
For such shopping carts when i manually run the report BBP_GET_STATUS_2 it replicates the correct status and the SCs disappear from the SC check status application.The BBP_GET_STATUS_2 and the CLEAN_REQREQ_UP programs are scheduled every 5 mins.
Any hints or ideas will be much appreciated.
Best regards,
Sambit

Hi Sambit,
In Check status, in extended search check whether the incuding completed shopping carts check box was checked or not.
If the check box was checked then even the completed shopping carts get displayed.
Please let me know if this is not the case.
Rgds,
Teja

Change Button Not Active even after Delivery Completion Indicator is Remove

Hi ,
In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
Thanks & Regards,

Hi,
Please check these notes.
Note 1267916 - PO item flags do not stay checked
Note 1174982 - Return/deletion of confirmation does not update the PO flag
Thanks
Zameer

Help button not visible in off-line version

Why is de help/information button not visible in the off-line version. The web-based version is oké. In use Adobe Accrobat version XI.

if you use the off-line version, Formscentral AIR Application, help menu will bring you to the help page. For example: DE http://help.adobe.com/de_DE/formscentral/using/index.html

Re-publish site using 3rd party FTP Client-Changes are not visible

I uploaded my Iweb site to the server using FileZilla. When I make changes in I-web and republish, the changes are not visible. I even tested it out by deleting the site folder and re-uploading everything after I re-published the site in IWeb...but the change still isn't visible. Any suggestions as to why?

Apparently you publish to a folder.
iWeb's job is done!
What you do next with the files is your responsibility.
Try uploading the changed files to their respective folders on the server.
You can identify the changed files by the date/time.
Then in the browser, clear the cache and reload the page.
iWeb is not involved.

Why changes are not visible in alternate profit center heirarchy?

Hi
I did changes in the master data of profit center. I chaged the profit center group in the masterdata of profit center & the same change is visible in the standard heirachy but the changes are not visible in the alternative heirarchy.
I think it should visible as I did changes in the master data.
I just want to know why it is like so or there is some other way to change the master data.
I know i can drag the profit center as well in t code KCH9 or KCH 2.
After doing so i activated the same.
Waiting for sugestions, comments.
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 2:03 PM
Edited by: Smruti Mohanty on Nov 13, 2008 3:02 PM

Hi,
If your are using same profit center group(which is used in standard hierarchy) in alternate hierarchy,you will see change.
if your using different groups in Standard hierarchy and Alternate hierarchy you will not see change in alternate hierarchy.
hope this helps you.
Thanks,
Rau

Reset button not visible in settings, help?

Reset button and security button not visible in general settings on my iphone 4 . How do I restore them?

if you use the off-line version, Formscentral AIR Application, help menu will bring you to the help page. For example: DE http://help.adobe.com/de_DE/formscentral/using/index.html

Approve Button not visible in Tasks for Leave request in Tasks- MSS

Dear gurus,
Approve Button not visible in Tasks for Leave request in Tasks- MSS, anything missing on config end????
Any suggestions....
regards,
Rajasekar.

hello Bala,
there was some config missing in UWL, now it is working and here we have got some button launch dynpro ..this is leading to pop where we can approve or reject....
Thanks alot Bala..
In this we are getting more info, Display details in SAP GUI, View History, View all Time Approval and Attachments of Documents which leads to leave request details. These may be too flashy for the Manager who are from the typcial production centers....industries...So is there any way out for Hiding these.
Regards,
Raj

Interview, Contact etc buttons not visible on Hiring Applicants Form

Hi,
Interview, Qualifications, Schools & Colleges, Contact buttons not visible on Hiring Applicants Form.
Is there any profile option , so that the above mentioned buttons are visible ?
Thanks,
Angelica.

Hi Jhansi,
Thanks for the reply.
We tried the mentioned steps, but unable to view the required buttons.
Can you let me know if there is any profile option for the same, cause we are able to view the button in another instance, but not in the one that we are working on.
Thanks,
Angelica.

Message mapping (data flow editor, data dependcies buttons not visible)

Hi,
In my SAP PI...IR ...in message mapping screen some buttons are not enable/visible like
data flow editor, data dependcies,clear mapping buttons not visible)
any oss notes/help will be appreciated.
Thanks

Hi,
This will help you
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Go for 1.4.X version than 1.6.X The Problem will be resolved
Regards
Sangeetha

Button not visible in ess or mss appraisal portal.

i have implimented custome BADI implimentation for standard BADI " HRHAP00_ADD_HEADER " for my appraisal template for ess and mss. it is showing one additional data button in header section of the template. when i see this template in R/3 system in dev cleint or any cleint in server it is showing the additional data button. but when i go to web browser to open appraisal portal for ess or mss adn check the button is not visible there. please help. if it showing the additional buton in R/3 system adn standard BADI is implimented then it must show it in portal in web browser also. portal is built in web dynpro abap standard only.

I guess HRHAP00_ADD_HEADER badi is for only backend changes
Thanks
Bala Duvvuri

Park button not visible in F-63 screen

Hi,
I created a role that will alllow a user to park the document using F-63. In DEV it's working fine however when I transported it to PRD. The Park Document button (SAVE) is not visible or deactivated in F-63 screen in PRD.
Any help is much appreciated? Thanks.
Regards,
Threadstone

Hi Threadstone,
The GUI-Status ZBVV has got the save-Button PBBP, but the display of it can be excluded.
You can see what happens, when you set a break-point in function Group F040 (Transaction SE80, Function group, F040, PBO-Module, Status_setzen_zbv, click left of line-number of the line if yfuncl eq P.):
module status_setzen_zbv output.
tables: with_item.
*------- Standard-Status -----------------------------------------------
if yfuncl eq 'P'.
    status = 'ZBB'.
elseif yfuncl eq char_r.
    status = 'ZBF'.
else.
    status = 'ZBV'.
    if rfopt2-xcmpl eq char_x.
      status+3(1) = char_v.
    endif.
endif.
*------- STATUS setzen -------------------------------------------------
perform status_setzen.
endmodule.
Another Break-point might be set in subroutine extab_fuellen where functions are appended which shall not be used.
form exctab_fuellen.
refresh exctab.
if bseg-koart ne char_k and
     bseg-koart ne char_d                                   "/N394306
or ( bseg-koart = char_k and lfa1-xzemp is initial )      "/N394306
or ( bseg-koart = char_d and kna1-xzemp is initial ).     "/N394306
    exctab-okcod = 'ZEMP'.
    append exctab.
endif.
if yfuncl eq char_d or
     yfuncl eq char_r.
    exctab-okcod = 'BP'.
    append exctab.
    exctab-okcod = 'PBBP'.
    append exctab.
Yfuncl has got value D (display) or R (release). It can be, that the user has not got the authority for saving. Please check SU53 or via ST01.
Regards Wolfrad

Performance Management: 'Share with Main Appraiser' button not visible

Hi Gurus,
I am using Oracle R12.1.3, Performance Management module.
I am trying to publish Performance Management Plan with Objective setting and Appraisals both tasks. Appraisal plan is set to be appraisee initiated, standard appraisal
However - When the appraisee is trying to initiate the appraisal (by clicking 'Update' on the appraisal task appeared) - s/he sees all the objectives set and get to choose a performance rating. However - the button 'Share with Main Appraiser' button is not visible.
When I am trying to create a Performance Management Plan with only 'Appraisals' - this problem is not occurring. Any clue as to how to rectify this problem?
PS - I have tried disabling personalizations and re-tried several times - but the same error occurs.
Would really appreciate any response which might help.
Thanks and Regards,
Rahul

I'm thankful for your effort Hussein. However, this document is applicable for version 12.1.4+ while I am working on 12.1.3. I re-tested the thing after making some changes in appraisal template where I ticked 'Update Appraisals for Terminated Workers' and also checking 2 more related check-boxes. Surprisingly it worked.
Also if I am selecting method for objective allocation as 'Parallel' - then also this error is not occurring - even with old appraisal template. Although this hit and trial worked, I do not have a logical view about the solution and correctness in all environments yet.

Photo gallery menu button not visible (black on bl...

Lately (I don't know when it changed because before it was not like this) there is some strange behavior on my N8 when viewing photos in the gallery.
If I chose a photo to view and then tap on screen to get the options I don't see the two buttons at the bottom of the screen (Options and Back buttons). I found out that the buttons are present but they are in black - meaning they are not visible if there is no picture covering those parts of the screen (see attached photos). They are only visible if the background is very bright (white).
Is there any settings to change this annoyance?
P.S. The same is true if I open pictures in Photo Editor.
Attachments:
P1050880.JPG ‏1634 KB
P1050881.JPG ‏2361 KB

Okay, I've tried .ac3 audio and I get the same result.
I had a friend of mine try this test. He had two different Progressive scan DVD players. It played perect on one and showed these errors on the other (the audio not playing and the text appearing in a different font). He said it had somthing to do with the progressive scan settings of the player. One player could switch to this type of DVD and the other one could only do it manually in the menu screen. He said that even hollywood DVDs do this on these types of DVD players. Since I have NEVER seen this problem before what could he be talking about? And why would previous versions of DVD's that I have made in DVD Studio Pro 1, 1.5 and 2 work fine on these same DVD players?
This is driving me nuts. Why would one DVD player play the DVD perfect and another one play the video fine, but mess up the audio and text buttons on the menu?
Other people I have talked to stay that it may be the media it is burned to, but I'm using the same DVD media that I have always used?
Please help!

" change" button not visible in check status ?

Similar Messages

Maybe you are looking for