Change CAL to per user from per unit

Hello!
I bought per user CALS (has been verified) but I have been using per unit because the per user cal didn't update the license for the users. I don't understand why it works perfectly with per unit (group policy edited) but not per user? The system has been
online for one and half year now so it wasnt until know I noticed the problem because to many computers had been assigned a license and even when I revoke one of them I wont be able to connect another computer until december 10 so thats a big problem. I did
change to per user but it wont connect with the computer due to many licenses in use. Do I need to restart the server when I change to per user in group policy? And why is the cals working with per unit fine when I bought per user cal?
Regards

Hi,
>>don't understand why it works perfectly with per unit (group policy edited) but not per user?
Based on the description, I assume we are using group policy to manage Remote Desktop license mode. Here, please make sure that we have a sufficient number of RDS Per User CALs installed on the license server to provide an RDS Per
User CAL for each user that needs to connect to the RD Session Host server.
Besides, for this question is more related to RDS, in order to get professional help, it's recommended that we ask for suggestions in the following RDS forum.
Remote Desktop Services
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverTS
In addition, regarding issuing RDS CALs, the following article can be referred to for more information.
Install and issue RDS CALs or TS CALs
http://technet.microsoft.com/en-us/library/hh553159(v=ws.10).aspx
Best regards,
Frank Shen

Similar Messages

How to get users from Organizational Unit and with worker's subgroup

Hi
I am looking for a f. module to get the list of users from specific Organizational Unit and with specific worker's subgroup.
I found f. module SWI_GET_USERS_OF_ORG_UNIT but it seems not working and only returns the users, how can I narrow the selection to get only from specific worker's subgroup?
Thank you

Hi,
Try with FM RH_STRUC_GET with following parameters:
ACT_OTYPE = O
ACT_OBJID = worker's subgroup
ACT_WEGID = SBESX
Most important is to specify OBJID as the workers's subgroup, values for the others parameters may vary.
Cheers.

Obtain users from Org Unit.

Hi all,
Which tables I must know to obtain all users (purchasers) from Org unit?
I can't use a FM. I need to obtain this data from R3, not SRM.
Thanks!
Regards,
David.

Hi. All links are in table HRP1001. You will have to go back to this table many times.
Firstly you can get all the positions under the org unit from HRP1001, then you will have to go back to HRP1001 with the position numbers to get the person numbers and so on.
Regards,
Dave.

QoS roles on WLC, Per user or per conection?

Hi guys.
This morning I`m talking with my colleages about QoS roles on WLC and their behaviour, then a question has arisen me, because I know when I apply a QoS role or QoS profile it is a per-user role. Ok said my colleage, but What is the behaviour when several devices are using the same user with a QoS role applied?
Good question, I always assumed that this QoS role applies to every different connection managing it like a new user connection, that is, every new connection with the same user (if the QoS role is, for example, 256k for this user) will have a bandwitdh of 256k, but now I'm not sure if the WLC manages every connection at this way or divide the bandwitdh defined for that used into as many parts as connection have with this user ( for ten connections, for example, 25,6k).
Anyone can tell me how is the behaviour of the WLC in this scenario???
Thanks in advanced.
Best Regards.

My2c.
If you apply the values on QoS profile instead of User profile then it is applicable to users connected to that WLAN mapped QoS profile. This way total no. of users will divide the available bandwidth. However, user with p2p application might consume all available bandwidth.

Changing the automatic Distribution Rule from Per to Full

Hello SAPians,
I have a scenario where the Customer is maintaining the Moving Average Price (I know this is not SAP suggested, I am in the process of convincing to move from moving avg to Std) for the Semi-finished goods and finished goods.
It is Product Cost by Order scenario where Process Orders are using and the settlement rule to the Material and distribution rule is "Per" (Periodic). The main reason Customer had this Per was they would not be able to settle the Order once they settle it in full.
But due to increased issues in month end atctivities due to thie 'Per' settlement (settlement of Process Orders not settling properly in the last month due to the failure of Batch jobs and other reasons). I want to suggest them to use Distribution Rule 'Full' instead of 'Per' because of the following advantages considering the above scenario.
1. The 'Full' settlement can be settled if the Order is not in Teco or closed status any number of times as long as there is the Variance sitting on the Order.
2. The 'Full' Distribution rule will not create issue if the variance is sitting on the Order in the closed period because when you do the settlement in the next period, system will allocate the variances from the last period to the Material Receiver in the current Period(I have not yet tested this scenario) and has not been. (Yeah I know there will be issue if the Material has been moved out of inventory before the settlement happens, they have another set up to update the Material prices manually by keeping the track of cost of Material).
3. So the config change will be the Product cost by Order -> Manufacturing Order-> Define Cost-Accounting-Relevant Default Values for Order Typ --> change the Default rule from PP1 to PP2 'Process orders (periodic settlement)'
Please let me know if what I am thinking is wrong based on this sceanrio and also please give me some more insight if I am missing any points.
Thank you very much for your time!
-Harter.

Hi Balaji/Ajay,
Could you please help me in understanding the effect of Variances if I change the Order type to FULL in this scenario (Moving Average price for Finished good Material)?
I checked the configuration and the Variance is only Total Variance that is settling to FI and COPA.
Also client is more concentrated on Variance accumulated per year and not per month.
Let's say I have Order in Period 9 where the actual debits on the Order are $1000 and actual credits are $1200 where balance (variance) is $200 and suppose I missed the Period 9 settlement and I want to settle this Order in Period 10 where I had $100 variance in that Period 10
Period         Variance on Order                Status
9              $200                   missed
10              $100                   not yet
So now when I settle the Order in period 10 (with FULL as settlement type), it settles $300 instead of $100 variance. So if this is the case, if I look at the Variance data, yes the variance data is wrong but if I look at yearly perspective, it looks right but I think I am missing something here, right?
Also what happens if the Order is open more than one year and the same scenario happens, the Variance will be posted to new year which is again issue, right?
Am I in the right direction?
Please advice.
Thank you,
-Harter.

Changing personnel area/subarea (IT1008) from org unit to position

We are live with PA and Org. Mgmt, but have been advised to change the infotype 1008 data - personnel area and subarea to be stored on the position instead of the org unit (where we have it now). A big reason for this is we have cases when we need to overwrite the personnel subarea at the position level. For example, a position belonging to an org unit with subarea ABCD, may really be in subarea WXYZ. Therefore, even though the org unit is ABCD, it will be overwritten at the position level to WXYZ. My understanding is that the RHINTE30 program will not work approrpiately if we are maintaining the data this way.
In transaction PPOME there is an account assignment tab on the org unit with cost center (filled in) and personnel area/subarea (which will be blank moving forward since that data won't be maintained on the org unit). Then, there is also an account assignment tab on the position with cost center inherited from the org unit (sometimes needing to be overwritten at the position level), and the personnel area/subarea data. My question is how should I handle the view of PPOME for this data? Can I hide the personnel area and subarea on the account assignment tab for the org units only so it is not confusing for the users? The problem with having it this way is that personnel area and subarea are blank on the org unit and filled on on the position. They are conflicting and both visable/maintainable to the User. Any advise please? Thanks!

Hi Nish,
I gave you my input on your other related message and now will go for this one.
As I commented on the other message, RHINTE30 will not integrate infotypes 1008 and 1013. So you don't have to worry about using this functionality (first part of your message).
On the second part (personnel area / subarea on position rather than org unit): there are some considerations here that are more functional / process driven than technical. From a technical point of view, everything can be done. You can hide data from infotype 1008 on the tabstrip for your org. unit using dynpro handling, even via customizing. You can even transfer the data from infotype 1008 on the org. units to the positions or delimit it on the org units. There are some quite easy ways of achieving this using the LMSW tool (have you used it? I can forward some documentation).
But personally, I would not recommend to do this from a process point of view. Everything in SAP HR is about the inheritance concept, and I think this works very well when it comes to org. units and positions. It is normally advisable to record personnel area / subarea on the org. unit level. This will be inherited by positions (even if you cannot see it at position level in PPOME) and thus defaulted for the employee. At position level you should handle only the exceptions, which will be in turn also defaulted for the employee holding the position. In this way, data maintenance is minimized. If you delete (or do not use from now on) information about infotype 1008 on org. unit level, your HR department will have to maintain this every time a position is created, and even in cases in which a position is shifted from one org. unit to another one.
In my opinion, you should address this with your HR department and explain the concept and the consequences of maintaining all at position level. It would only be advisable to do it if the org. unit structure is very cross-personnel areas and subareas. If it is a matter of handling exceptions, again, I would recommend to continue recording this data at org. unit level. All in all, if the data is not recorded on the position and you need to see which is its personnel area, you just need to double-click on the org. unit above.
Just wanted to let you know my opinion, of course it's your decision. By the way, I'm of course not aware of other possible implications like home-developed reporting and so on.
Regards,
Rodrigo

[ESSO issue] Moving user from Org Unit

hi all,
i've met an issue at a customer site.
eSSO has been deployed, synchronisation done with ESSO eDirectory.
Users are now using it but recently some users have moved from an OU to another (something that happens frequently everywhere).
The problem is that ESSO seems to keep the initial user location in the Current User registry and seems to always want to use this entry even though authentication fails (since user is not at the same ldap location).
So authentication failed and users get an "Failed To Connect To Directroy".
We don't want to change directly the registry since we think it's not really nioce and shouldn't be done.
Is there something that must be setup to search again in the ldap structure to find when authentication with synchronizer fails ?
ps : it's not a problem with the location parameter. It's pointing at the ldap root entry.
thanks for the help
-regards.

I haven't come across the issue myself but I think if you move a user, you need to create a 'User Pointer' SSOLocater object that points the agent to where you have moved the user to.
Good luck.

When connecting to a previously opened server, how do I change to a "registered user" from formerly used "guest?"

During my attempt to transfer my PC contents to my Mac using an ethernet cable, I typed my PC name in to the server address space (under connect to server). I did not understand that the sign-in info for "registered user" was supposed to be my PC sign-in info. I was trying to use my MAC info, which didn't work, so I just signed in as a guest. All the files are useless, I think because I signed in as a guest. So I would like to sign in as a "registered user," now that I know I need to use my PC sign-in info. However, now the mac has it in its system and won't give me the option. Does anyone know how I can get a second chance to do this?
Thanks, Sharky

Server Admin 10.6 Help: Changing the Password Type to Open Directory
Server Admin 10.6 Help: Changing a User’s Password
Server Admin 10.6 Help: About Password Types
Server Admin 10.6 Help: If You Must Reset an Administrator Password
Server Admin 10.6 Help: If You Can’t Change a User’s Open Directory Password
Server Admin 10.6 Help: Changing the Password Used for Authenticating an LDAP Connection
Server Admin 10.6 Help: Specifying User Name and Password

How can i change the email and user from app store?

I have a iPhone thats a FIFA from my daugther and she has an account in the app store, i an trying ti configure my app account and the sistem Does not permit me to do it, my question is how can i do to solve my problem thanks

If you mean that you are trying to change the Apple ID used for purchasing apps, go to Settings>Store, tap the Apple ID at the bottom, sign out, then sign back in using the ID you want to use.

What is the difference between licencing pricing list calls per user possessor per to buy a sqlserver 2012

hi...................
i am junior system admin .In our company we want to buy a sqlserver.. i have a little bit confuse how can u buy
it depends on processor or user calls ..............PLEASE GIVE ME SUGGESTION ...........how to buy......i am expecting full description... Thanks in ADvance

Thank u
if i bought 5 calls means ?
1. i can use five times
2. i can apply to five users..
which one is true 1 or 2

QT Pro Key - per user or per machine?

I bought QT Pro for my Mac Mini. I also want to register QT Pro on my Windows machine. Do I have to buy Pro again or how can I get a Windows key?
Mac Mini Mac OS X (10.4.5)

No. After buying it for the Mini, it didn't work well, and I downloaded MPEG Streamclip and use it instead. I was on the Windows box today and wanted to save a movie without sifting through source, so I tried registering the Windows copy of QT with my Mac key, and it didn't work. I sifted source..

Mix to use Per user & Per device CALs ??

Hi,
I have built 2 RDS server and formed a NLB cluster.
Is possible mix Per user and Per device CALs to use under this environment ?? How to make it ??
Thanks

Hi,
Please see this similar thread which covers how to set it up and how to do tracking of licenses
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2ce9f814-822c-436b-bd12-80e1ec74c27b/combine-both-per-device-and-per-user-rds-cals-on-the-same-remote-desktop-session-host?forum=winserverTS
Kind regards,
Freek Berson
The Microsoft Platform
Twitter
Linked-in
Wortell company website

Impact of moving a user from one organisational unit to another.

Hi
my system description :
extended classic
srm 5.00
I am new to srm and i would have some questions about the impact of moving a user from one organisational unit to another.
The senario is that:
I have moved a user from organisational unit X to Y lets say different purchasing organisation
The user had PO created in organisational unit X waiting for goods receipt but even if he is now in organisational unit Y he can still create the good receipt for the PO created in organisational unit X .
Is it ok?
Futhermore not only can he create good receipt but the good receipt take the cost center assigned in organisational unit Y whereas the PO has the cost center of organisation X.
I believe that is how the confirmation works in SRM. However is there a way for it to take account assignment from the PO instead of where the user is situated in the org hierarchy when doing confirmation.
Thanks

Thanks for your answers
Maybe i should explain how the user was moved.
I did not used users_gen because i didn't want the user's partner ID to be changed. If the partner ID is changed then the user would not be able to access PO from old Organisation Unit. (can somebody confirm this please)
I did right click on the wanted Organisation Unit then assign the user. The problem is that the relationship between the user partner ID and the new organisation unit was not maintained and the user could not create shopping cart in the new organisation unit.
To solve this issue oss note 1041701 was implemented and the issue was solved.
But before the the implementation of oss note 1041701, if the user had open items from old organisational unit he could not access PO thus could not confirm goods receipt when moved in new organisation unit.
Now this is possible he can confirm goods from old unit but the confirmation is done using cost centre of user instead of the cost centre of the PO.
Jagadish you said that the confirmation must be done using PO accounting details not the user attributes. Then i think i have a problem in my system.
regards,
yannick.

Sa520 Web filter per user?

Is there a way in the sa520 to enable HTTP filtering per user or per group? I simply want to add a "executives" group that do not get blocked out as much as Normal users.

Hi John,
If you use the standard Content Filtering of your SA520, then you cannot segregate client access. Either all clients are blocked or all are allowed.
If you buy a license for ProtectLink Gateway, then you are able to block a group of users from viewing certain sites, while predefining a list of clients that will have access to the sites in question- in this case your Executive Group. However, they will have access to all sites. Clients will either be blocked or allowed to visit sites that are to be filtered.
Cheers,
Julio

I am an iphone4 user from United Arab Emirates with home button/MIC not working during call problems..

hi, i am an iphone4 user from the United Arab Emirates. I got my phone as a gift last September and it was not bundled with any carriers and was a factory unlocked piece. Within one month of usage the home button started misfunctioning. It started registering double clicks as single, triple clicks, etc. (the usual complaint of many countless users of iphone from the time of the release.) I then kind of ignored this problem and continued using the phone.
With this problem still continuing, comes another one.
My friend gave me a call yesterday, and we were talking happily for a minute or so and suddenly without any reason my friend failed to hear me. Five minutes was spent trying to make myself heard to him. I tried and i tried and the only solution i could find was tapping the phone gently,but firmly. Then he was able to hear me but then after sometime it was back to the same problem.
The only solution i found was to tap in th sides.(please note that this is also a common problem with many who have call problems but no voice memo problems.) I tried adding and registering my device to my account but when i try to put in my iphone's serial number,they say that the device number is invalid.
Now i want to get a solution to this, but since this was a gift piece i do not have any invoice of any sort. I even checked itunes.com/support and was happy to find i still have warranty till september.
I am confused as to what to do as I was dissappointed to find even a single apple store in the UAE and do not know what do we get in terms of support. Could someone please help me?

that is exactly the problem. I have no idea as in where this phone originates from. It was gifted to my Dad from a personnel who he was supplying for in the company. My dad then gifted it to me on my birthday. I asked my dad about the phone but he also does not know a thing. He also said that the other guy must have taken the invoice with him as he did not give anything to my dad.
I checked it in quite a few places (like SharafDG,eMax,Axiom etc., the local electronics suppliers) to track where this phone was originally purchased from( because these people usually take down the IMEI's of the electronic devices they sell), but they all could not help me.
Now i have no idea what to do and i do not want to spend huge amounts of cash for this matter as i am already in the warranty period. Anyways,thanks for your help in advance, but it would be helpful if you could try to get this solved for me.

Change CAL to per user from per unit

Similar Messages

Maybe you are looking for