Change Channel without pressing OK button

The X1 remote have intelligent feature that when I enter some channel number, it shows all possible combinations that match the wild card but the channel is not changed until I press the OK button.  Is there any way to just enter channel number and it would change.  For example, soon after I press 137, I expect it to be taken to channel 137, instead of me having to press the OK button.  All the remotes and systems I used in past (Comcast, Dish, WOW) have had this feature.

RobertWy wrote:
I wonder if this is the result of having the Guide in the cloud.  Channel numbers can be from one character to at least four, for now.  If Comcast went to five, well you see my point.   Maybe the software has to know how many digits to expect before changing channels.It's the same deal on legacy boxes, though.. When the 1000s were added, 3 digit channels require pressing OK too. Either way, it's 2015, who needs channel numbers anyway?

Similar Messages

  • So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

    So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

    Wait a sec did this just start?
    You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

  • Songs stop without pressing any button

    hi, I need help, my ipod nano stops the song while I am listening them without pressing any button not even play/pause button. If someone can tell me what to do it will be great.
    thanks

    no, the songs just stop, it does not turn off or turn on, the songs stop, and then i press the play/pause button and it continues playing but then it stops again many times, may be it will fix without help but it is a little annoying, also when i reset the ipod it fix just for a little time then it continues stoping.

  • How to trigger 'save' event without pressing SAVE button

    Hi, i want to execute my 'save' event without press the SAVE button.
    I want to simulate press the button with abap code and sy-ucomm = 'SAVE'.
    Is there a function module for this functionality
    Thanks
    Reward Points

    Well, than just forget about the buttons and create some code at the end of the PAI event which you have already coded (i realize some actions ( with my code)). Just do a perform event_xxx and perform event_yyy. The code which will be executed (processed) will look exactly the same as if you had created it when pushing buttons:
    CASE OK_CODE.
    WHEN 'AAA'.
    let's say this is done with your code
    perform event_aaa.
    perform: event_xxx, event_yyy.
    WHEN 'XXX'.
    perform event_xxx.
    WHEN'YYY'.
    perform event_yyy.
    ENDCASE.
    Helpful?

  • How to keep the watch to display without press the button on my iPod Nano 6th)?

    Dear Guys,
    I have purchased a watchband for my ipod nano 6th recently, overall is okay but i don't know how to keep the watch to display without pressing the sleep/resume button on edge? Also, the screen is not showing the watch immeditaly when I press the button, it shows the music/cd folder, then I need to scroll the screen back to the watch display.  Please help.

    There is no way to keep the display on permanently, as doing so would significantly reduce the overall life of the battery.  It would maybe last only hour, maybe not even.
    As for having your iPod wake up to the watch view, head to Settings -> General -> Time on Wake -> On.
    B-rock

  • My keyboard goes on caps lock without pressing the button and change everythings, numbers and etc. What should I do?

    I was using my keyboard normally, suddenly I was typing and it was all in caps lock and I havent pushed the button for that. I really dont know what to do. Every time this happens, I turn off and turn it on again. Help!
    What should I do?
    Thanks

    No I dont have it. Should I go look for it?

  • Color changing when i press edit button

    I have a photo that I want to edit. Its a Jpeg taken from a Canon 550d.
    When I press the edit button to go into edit mode the color on the picture slightly changes color even when I dont make any edits!
    Anyone know whats going on here?

    How much a change is the color difference?  Can you provide screenshots of the two?
    it could be that the thumbnail (which iPhoto created during import) which you're viewing does have a slight color shift from the original file. It's the color of the original file that is important. 
    OT

  • Et_validate doesn't fire if user changes value and presses update button

    I am maintaining a flag for "dirty" records in a potentially large number of rows in a matrix. To set this flag I check for the et_Validate event and ItemChanged = true. This works fine if the user changes a value and then presses tab to leave the field.
    My problem is that et_Validate does not fire if the user changes a field's value and then presses the update button.
    It's like the screenpainter where if you change a field's value and then select a different field before pressing tab your change isn't saved.
    I suppose I could always send a tab keypress or automatically update the current row but I'm wondering how others handle this.
    I am currently using SBO2005A SP1 PL11.

    Additional info:
    If I change a matrix cell and click on the update/ok button then the ItemEvent.row = -1 and the active item is still the matrix. If I force a "click" in a field on the first row then the et_validate fires otherwise it does not.
    Does anyone have any other ideas on forcing et_Validate to fire when the user clicks on a button?

  • TS1365 Power on MBP without pressing the button

    Most modern laptops turn on without having to press the power button (needs a bios setup tweaking e.g. power on laptop when lid is open). Does new MBP have similar options? Power button is working fine (no problem with it), but would be nice to have it powered on when lid is open. Thanks!

    No, not that I'm aware of.

  • I want to re-map my function keys without pressing fn button

    Hi
    I have a new MBP
    I have unchecked the box that lets me use function keys for other than their original puroses
    So now I can use e.g. my last volume button to work instead as a Mission Control / Show desktop function that is really useful for me as I have one funcitonal hand.
    However I'd like to remap or reassign the function buttons. For example my F1 F2 now do nothing - I could assign them to certain other  functions, but I'd like to assign them back to screen brightness.
    Is there a way I can do this?
    And is there a way i can consign the dashboard to the bin, and use that button for something thats actually useful ?
    Thanks
    tom

    Christophian wrote:
    I did not explain myself because that is patently NOT true. I have 4 laptops at this time. In all of them when I press F5, it is F5 not screen brightness or what ever. In order to access the 'blue' functions like screen brightness, keyboard lights, speaker volume etc. I have to press and hold the fn key. However, on my Envy, I have to press and hold the fn key to access F5 rather than just turning on and off the keyboard lights. Now I wish I could reword this thread.
    OK. I don't claim to be perfect. I just looked at three of the notebooks currently at home The newest, which is a dv7-4180ea (HP loaner) has F keys is configured like on your Envy. The HP NX6320 and the Toshiba Satellite M305D have the F keys as main and have secondary functions. They are more straightforward with the use of the Fn key. It appears that it depends on what the manufacturers decided to do at the time.
    BTW if you look back at my unedited post you will see that I did indeed qualify my statement when I wrote it with the word some. So that is not a patently untrue statement. I try to choose my words carefully.  I will edit this post so you can see what I mean.
    best regards,
    erico
     ed:
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Why did my ringtone disappeared without press any button

    i bought a ringtone from ITUNES , set it as my caller ringtone , but few hours later , it changed automatically n I don't know why , cause I've paid for it twice only for this ring tone -.-
    p/s: I didn't upgrade anything n synce my phone ..

    There was a bug with iOS 8.1.1 which affected ringtones, that was fixed in iOS 8.1.2 onwards : Restore missing tones on your iPhone, iPad, or iPod touch running iOS 8.1.1 - Apple Support

  • How to automatically connect to wi-fi after turning macbook pro on from sleep (without pressing a button!)

    Hi there, I was just wondering how to connect to wi-fi as soon as I turn my macbook pro on from sleep mode
    The thing is, I constantly have to select the network i want, even though I've already set the location to automatic and even added the network to my preference list..
    What else can i do?
    I know a few friends who have the same macbook pro as me but do not have the same problem as me! And even they don't know what to do..

    you've posted in the iPhone forum.

  • How to open a Website in app automatically (without pressing button)

    I want to load a Website automatically into a page in my app without pressing a button (autoload). How can I do this?

    Web Content overlay lets you display a web page within a view area. Users can see the web page content in the view area without having to display a separate in-app browser. You can specify a web URL or a local HTML file.
    If you specify a local HTML file, make sure that the .html file and associated files and folders appear in the same folder. When the article content is created, all the files in the same folder as the .html file are uploaded.
    For any URL that gets redirected to a mobile URL automatically, specify the mobile URL (such as http://mobile.twitter.com/), not the original URL (such as http://twitter.com).
    Laxman

  • IPhone 5 screen locking without pressing the lock button

    Recently my iPhone screen has started locking without pressing the button. It is like it is stuck but the button isn't even pushed down. It does it so often that it is hard to use my phone because it keeps locking the screen and then trying to turn off the phone. It wasn't so bad at first and I used the accessibility feature to lock my screen in case something was wrong with button. However, my friend was looking at my phone and pressed the lock button which made it start going crazy again. I can't turn my phone off either because it will automatically turn back on because the button is going off. It is almost like there is a ghost pressing my lock button constantly. That is the best way to describe it. I'm not sure if I am under warranty or not, I got the phone from Sprint in the beginning of June.

    Make an appointment at the genius bar and have it looked at. It sounds like the power button is failing.

  • How to lock the phone without pressing power butto...

    I am using Nokia Asha 500, Nokia Asha Software Platform 1.1.1.
    My question is there any way to lock the without pressing power button. 
    This function can be added in the drop-down menu(The menu when we swipe down from the status bar).
    Is it possible to send request to developers?

    Yep and technically something like already exists: from Settings > Phone lock you can set the screen time-out period (down to 30 secs).
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

Maybe you are looking for