Change color of datatip point

How would I go about changing the color of the point on a datatip in a flex chart?

Right click on chart and go to format chart and use the tab Color Highlight and give the range and color to that range of values.
Regards,
Raghavendra

Similar Messages

Change color of mouse-pointer?

Hi,
is it possible to change the color of the mouse-pointer from e.g. the given black to red?
Thanks,
Michael

The subject is discussed (not very clearly) here:
http://www.mackb.com/Uwe/Forum.aspx/mac-apps/18267/Cursor-color
There are various bits of software around which will change your cursor to a different image (though inevitably many of them are for Windows): some searching on Google will throw up plenty of this sort of thing.
Be aware that all these methods are in effect hacks: they may be unreliable or make your Mac unstable. Use at your own risk.

Images Change Colors between monitors while the UI stays the same

Hey! Im having an issue where photoshop changes the colors when I move the window between my monitors, seen here: http://sta.sh/04y5s60vf3j This isnt due to the monitors themselves being different, it actually changes after a few seconds of moving it inbetween the monitors. The left one has been callibrated with a spyder 3 elite which I no longer have access to. I applied the file with windows color management instead of the spyder utility. The second one is new, and it is not callibrated by anything, but instead was done by hand with the built in brightness/contrast/custom RGB settings. Both of them are very close to eachother, enough so for my tastes. but when photoshop changes what the image looks like, it's causing problems. Interestingly enough, when I disable callibration for the monitor on the left, the image does not change colors between monitors, but instead always appears as it does on the right. but then they don't match up and the whole screen looked washed out because it's uncallibrated, so that doesnt do me any good. Another interesting thing to point out, is when this image is saved as a .JPG, and viewed with firefox the image appears exactly like the monitor on the LEFT (which is my main monitor) despite the left monitor being the one that is force changed. does anyone have any suggestions? It also appears that windows photoviewer is behaving the same way, though firefox does not. Meaning when I open an image in all 3 on the left monitor, they look the same, but when opened on the right monitor, windows photo viewer and photoshop both display the image as brighter and redder than firefox does. This is frustrating, because it seems photoshop is changing the image with my callibration on my left monitor to match what it looks like on the web, which it does. but it doesn't do this for the right monitor, or when the left is uncallibrated. Another issue I can see with this is even if the UI is the same shade of gray, the images are different between the monitors because of this change. Does anyone have any suggestions?
- BD

Alright! So I reread through all this, poked at some things on the internet, and I'm going to attempt to summarize what would be a good solution for all this (And it seems, it still won't be perfect, but to get myself into the best environment I can for not messing with images for an hour trying to make them look nice before I post them to the web. I painted something yesterday on the cintiq, popped it over to my laptop screen and it just looked washed out and terrible.)
1. Get a X-rite EODIS3 i1 Display Pro, Callibrate laptop and cintiq. I do have the money to drop on something like this, especially if it's a time saver.
     Things I'm not sure about:
          a. There was a ton of complaints about the software not working when I checked reviews, but also a ton that said everything was great. most of them were mac users though.
          b. I'm not sure if problems would still be posed, even while calibrated, by me having a wide gamut monitor.
          c. I'm a terrible excuse for a human being and I think the colors showing up brighter on the wide gamut screen is pretty (I should just make my images this bright on a normal screen and there won't be any issues. >.>)
2. Set Firefox to color manage (easy enough)
3. Change my photoshop working space to sRGB (since they'll have been calibrated at this point)
3. Accept the fact that most of the people who look at my work will be doing so on a monitor that is almost certainly uncalibrated, and I can't control what they will see on my screen, but I CAN control if the colors are -actually- what I want them to be on any properly calibrated device. which is probably the best way to go anyways.
4. Make paintings, have fun.
Now, you two have been going on about all sorts of interesting things in here, and it seems that calibration issue run much much deeper than I ever thought. Do either of you have recommendations for how I should tweak this list of things to do or other things I can/ should do? I'm not currently a working professional, but if I have anything to say about it, I will be within a few years (I'm going to school for illustration and studying concept design on my own time) so it'd be useful for me to get into good habits now.
- Brendavid

Why do eBay item listings no longer change colors after being viewed?

Need some help with a problem – in the past, when I opened a specific listing on eBay, it changed color from blue to red when I got back out of the listing. As of late, they do not change and remain blue. As I do 20-30 music title searches daily, the color change was a real time saver as I could tell immediately when I had begun yesterday’s search as it was now red. Without the color change, I have to pay much more attention and invariably end up searching beyond that point until I realize it. Do you have any idea how I can get back to the color change? Any help would be much appreciated.
Many thanks!

I've seen more posts from people that also have this issue with visited links while using the Back button, so this behavior may be a regression and caused by using the cache more aggressively.
Does opening the link in a new tab work to show the visited state of links?

How to change color in analytics chart designer

Hi Guru's,
Could any one tell me how the chart color can be customized by using chart designer.
I need to change the category colors in the way High--> Red, Medium --->Yellow , Low ---> Green.
Chart designer doesn't gave me the flexibility to change the category or point section color through that.
Thanks
Praveen Gupta

Hi,
check the properties of graph. I guess you can change the colors in properties.

How to change colors in calendars in ios7

I find I can change colors on the Exchange account (gmail) but not the regular gmail account. I do not use iCloud for cals.
In exchange there is an info button (i with a circle around it), this is where colors can be chosen at will.
In gmail there is no way to make this choice.
A problem, since I have several daylong events in a dark color that are obscuring, viz masking, hour long appointments due to the color schemes that cannot apparently be changed.
is this true?
Thx
PS: I've read that exchange has been deprecated as an account type and that "Gmail" is the preferred option for google calendars, etc. Is that true? Will Gmail accounts push notifications the way Exchange did?

Precisely the point.
Exchange (run through native Apple Cal.) gives these options.
Gmail (ditto) doesn't.
My understanding is that now the preference is to use Gmail over Exchange, which is no longer supported by google.
I've experienced problems syncing with Exchange but not with Gmail (some calendars do others don't sync in E.)—maybe for this reason, I don't know. I currently combine where needed and possible so that I have the color option, which to me is worth the slight inconvenience of running two different Gmail calendars at the same time.
It sounds like you don't use either just iCloud for syncing calendars, so I may open another thread to ask about this situation. thanks.

Changing colors ONLY

OK, I have the menu done, and now I want to play with the colors of the individual menu Items.
Right now they are Greenish. I have a Paragraph style (and Object styles, calling the Para styles) with Green specified as the color.
What I want to do, is simply go out to all the text frames and change in one click all the green colors to (for example) Blue.
But the formatting changes when I do this so I am not sure what I am doing wrong.
Any suggestions would be appreciated.
Bob
edited comment added. I think I see what is getting me. In the Changing Colors Paragraph Style, it sets the Font and Point. How do I get a style to just change the color and color only (leaving any formatting untouched)?

If you already have a style applied to this text, the simple thing to do is edit that style to change the color.
You could make a new style based on the other, changing only the color, but it would take longer to apply. Editing an existing style is an instantaneous way to make changes through the whole document in a single operation -- that's one of the big reasons why you use them.

Oracle form query mode does not change color to blue

Hi, I have created a custom form and using query mode in it. However on hitting F11, the record does not change to blue, instead it turns white. Can someone please guide me as to what I should be doing to get this right?
Thanks for your responses.

The fact that it doesn't change color when you "Enter Query" mode tells me your Custom Form does not conform to Oracle Application Programming Standards. I recommend you visit the Oracle Applications Documentation web site, choose your EBS version and scroll down and look at the Oracle Applications User Interface Standards for Forms-Based Products and Oracle Applications Developer's Guide to ensure your Custom Form conforms to Oracle Standard.
Also, I suggest you always use the TEMPLATE.fmb (or if you can't find this form, use the APPSTAND.fmb) as the starting point of any Custom Form. This will ensure you have the minimum required objects and code in your form.
Hope this helps,
Craig B-)
If a response is helpful or correct, please mark it accordingly.

Changing colors of individual bars in a XY Graph

I am using an XY Graph (bar style) to display 50 voltages. I have limit settings (low alarm,low warning, high warning, high alarm)that I would like to impose on each of the 50 bars in the XY graph. My problem is that any way I try it the limits are only imposed on the first bar on the graph and all the following bars change colors along with the first bar no matter what value they have. Is it possible to control the properties of individual bars inside an XY Graph ??

> I am using an XY Graph (bar style) to display 50 voltages. I have
> limit settings (low alarm,low warning, high warning, high alarm)that I
> would like to impose on each of the 50 bars in the XY graph. My
> problem is that any way I try it the limits are only imposed on the
> first bar on the graph and all the following bars change colors along
> with the first bar no matter what value they have. Is it possible to
> control the properties of individual bars inside an XY Graph ??
>
The short answer is no. All of the elements in a plot use the same
colors to draw. To get the display you want, you need four plots.
Write a subVI that takes in your array and returns the four that you
need. It will index the elements and generates a value in four othe
r
arrays such that three of them are NaN and the fourth contains your
value depending on the alarm status keeping the same X value with all
four plots. As an example, if the value is lower than the low alarm
limit, the value will be placed in the low array and NaNs in the other
three arrays.
Now wire the four arrays to the graph as a multiplot, you will either
use a build array or a Build Clustered array depending on the XY type.
The plots will overlay, with only one point being non-NaN for each X
location. It will use the color for plot 0, 1, 2, or 3 depending on
which array the value was in.
Greg McKaskle

Changing color of columns in CL_GUI_CHART_ENGINE

Dear Developers,
I am displaying a Columns Graph using class CL_GUI_CHART_ENGINE. My requirement is to change color of selected columns based on their height. For example if height of the column exceepds 10, then the color of that particular color is to be made red. Is that possible using CL_GUI_CHART_ENGINE ??
Thanks and Regards,
kartik

Hi,
Refer below link:
https://forums.sdn.sap.com/click.jspa?searchID=3958197&messageID=2474585
<b>Reward points</b>
Regards

Change color spectrum orientation in 3d plot

hi,
I have a 3d plot:
x-axis = wavelength
y-axis = angle of reflection
z-axis = intensity counts
the 3d surface is colored like the spectrum, now i want to rotate the color orientation, that it corresponds with the wavelength, but I do not want to change the axis. thanks.
Attachments:
spectrum - reflection 3d.llb ‏980 KB

Hi Robert,
This is not as easy as right-clicking...
I had posted a crude (er messy?) example that shows you how to define the color of each point plotted in 3-space.
The following link shows the result of doing a parametric plot using this method.
http://forums.ni.com/ni/board/message?board.id=170&message.id=84079&requireLogin=False
Look fo rthe LAST jpg I posted.
Unfortunately, I could not find where I posted the code. I needed Molly's help to get it posted because it was a 4 meg example.
What you want to do is use a custom color map and use the "w" vector to specify the color of the points. The values passed via the "w" vector must match up with your custom color scale.
Maybe someone else knows a better way. I'll watch for updates.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to programmatically change color of arc in cwknob

trying to change color of arc in cwknob control conditonally

I'm not entirely sure what part of the control you are referring to by "arc". Can you elaborate?
If you mean the (by default) black line that the pointer points to when you choose a meter style and to which the major and minor ticks are connected, you can change its color with the following code:
CWKnob1.Axis.Ticks.MajorTickColor = vbYellow
If you looked for and didn't find the property you need, I suggest you check out the properties of the Axis subobject of the knob. People frequently overlook this important subobject of the knob and slide.
In general, if you are able to configure a property on any property page except the Advanced property page, you should be able to configure it programmatically.
If my suggestions above don't get the job done
for you, you could take screen capture of the control, drop it in Paint, circle the portion of the control you want to configure, and attach it to a response to this post.

Visited links stopped changing color suddenly

visited links stopped changing color suddenly

Well, I'm a mixed bag. After wasting time and missing the point earlier, thinking that this was about the Google app, today I finally suss to the fact that the discussion's a tually about in fhe browser ...
Anyway, I take a look and, sure enough, the first one I try does pop into a violet color when returning to the results page. I thought it distinct enough to easily notice, and couldn't remember seeing it before (use the app most of the time).
Unfortunately, that was rthe one and only time I saw that happen over the next ten minutes of running searches on multiple topics. All subsequent cycles showed the exacrt same shade of blue on return, and this includes tests run in the middle of and following such steps as clearing the app (cache, cookies history), force quitting the app, and restarting the iPad.
Nothing made any difference. That first time was the one and only time, so far, that I saw the color change.
Also tried a Reset. No change. I guess if it's really supposed to work then a Restore might do it but .... I think not.
Message was edited by: Michael Morgan1

Need help changing colors in a photo.

I am trying to help some artists in mexico with their weaving. We are using elements 11 on vista 7. We would like to change colors in a piece to see if they are pleasing to the eye. Is it possible to change colors thoughout the whole piece at once? Using a brush to paint over each and every area would be so time consuming as their work is quite intricate. If this is not possible on Elements does Adobe have another sotware that would accomplish this task. Thank you for your time.

I did not know I had to go to expert as i have never used this type of program before.The help was just telling me the tools were on the left side. I thank you for pointing me in the right direction. I have a feeling it will be easier for me to learn Chinese.

Text Hyperlink changes colors--how to change it?

When I change colored text into a link, the color of the text changes to a different color. It looks bad on the background color. When I move the pointer over the link, the word color changes to the color I selected. Can I change this or select the color it changes to?

you might be interested in these links:
http://karreth.com/iweb/How%20To%20Change%20Hyperlink%20Colors%21.html
http://www.rowan-cottage.co.uk/Site/CSSiniWeb.html
max

Change color of datatip point

Similar Messages

Maybe you are looking for