Change color on clip art

With MS products you can change the color of a clip art item. Can you do it in Pages??? Or anything MAC?

You can't in Pages, but there are a lot of Mac graphics programs - Photoshop Elements, Photoshop, GraphicConverter, just for starters.
FYI: Apple Macintosh computers are referred to as Mac (capital M, small a, small c), not MAC (which is an acronym for the Media Access Control address of a networking device).

Similar Messages

  • How change colors of clips in imovie, how change colors of clips in imovie

    Hi, is it possible to vary the colors in iMovie on iOS?

    Hi Kiran,
    no its not possible through Theme editor also ,because these colors are coming from Compiler which u are using.
    Regards,
    Govindu

  • Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Is it possible to change the color of imported art in pages, say from B&W to a color?  ... or even to make it a gradation of color?

    Make a Shape > Inspector > Graphic > Tinted Image Fill > Scale to fit > browse to image > click on the color patch to change the color to what you want
    or
    Drag in an image > overlay it with a Shape > select the color for the shape and change its Opacity
    Shapes may have Gradient and Advanced Gradient (multiple colors) fills both linear and radial. Both are in the Graphic Inspector as is Opacity.
    Peter

  • Color correction change across all clips?

    I know how to make a color correction to my first clip, then I can copy and paste it onto all the other clips. However, what if I want to change the color correction later on? I have to delete all the color corrected clips, and then make a new correction and re-paste. Then if I want to do it all again, same hassle. This can be very bad when working with hundreds of clips on the timeline.
    I wonder if I can set up a color correction profile and then send the clip to that profile. Then I can change the profile and each clip will follow that.
    Thanks,
    MrD

    Two observations...
    1.  You don't have to delete the clips to change the CC.  You simply modify settings in the effects panel.
    2. Provided that you want to apply the same CC to all the clips in (say) Timeline One - nest Timeline One inside Timeline Two and apply CC to it.  In this way you only have to apply one CC instance..

  • Changing color without modifying existing items.. problem!

    Hello,
    I'm reletively new to flash, and am trying to modify a template and am running into a problem and I don't seem to know why Flash is acting so strange.
    I am going into a movie clip to edit the color of an item, and when I do so with a tint, it overrides any additional effects such as light, and text. The color appears almost as if it were just slapped on top of everything.
    When I edit the color in advanced mode, it is really a hit-or-miss to get the correct color, and will only modify when changing the offset RGB.
    And also when doing this, the text gradually changes color, for example: there are 4 items in total that I want to edit the color of. Each item is a different colored box with text on the front (for a main Navigation of the website). --- The first item, the text will stay white. Gradually through the second and third items it starts to change, and by the fourth / last item, the text is completely blue.
    Is it possible for a portion of text to be connected somehow to an object within the animation in a movieclip? If so, is it possible to go inside and edit this? -the shape, animation, and text?
    Is there an easier way to change the color of an item inside a movie clip? I can supply additional information if needed.. files etc.
    Am I doing something wrong / completely missing something?
    Thank you very much in advance for any help and/or advice!
    New Flasher,
    Lisa

    go one level deeper than the movieclip so you're editing the shape.

  • How to make a clip art (diagram )interactive report?

    Hello ABAPers,
                           I want help from you. I have a requirement like ..when i am excuteing a report i should get a clip art and the clipart which i got i have to double click on it there by i should get the details of that clip art. I have succeed till getting the clip art and from here i am not getting the idea how to make the clipart(diagram) active so tht when i am doubleing it i should get the details.
    The code that i am using to get the clip art just copy and execute you will get the output till clipart.
    *& Report  ZCLIPART_IR                                                 *
    REPORT  ZCLIPART_IR.
    START OF DO NOT CHANGE***********************************
    DATA: docking TYPE REF TO cl_gui_docking_container,
          picture_control_1 TYPE REF TO cl_gui_picture,
          url(256) TYPE c .
    DATA: query_table LIKE w3query OCCURS 1 WITH HEADER LINE,
          html_table LIKE w3html OCCURS 1,
          return_code LIKE  w3param-ret_code,
          content_type LIKE  w3param-cont_type,
          content_length LIKE  w3param-cont_len,
          pic_data LIKE w3mime OCCURS 0,
          pic_size TYPE i.
    END OF DO NOT CHANGE***********************
    DATA : sum(4) , num1(4) , num2(4).
    PARAMETERS: p_dummy(4) DEFAULT '4' .
    PARAMETERS: p_dummy1(4) DEFAULT '5' .
    AT SELECTION-SCREEN OUTPUT.
      PERFORM show_pic.
      START-OF-SELECTION.
    *& Form show_pic
    FORM show_pic.
       DATA: repid LIKE sy-repid.
             repid = sy-repid.
      CREATE OBJECT picture_control_1 EXPORTING parent = docking.
      CHECK sy-subrc = 0.
      CALL METHOD picture_control_1->set_3d_border
        EXPORTING
          border = 5.
      CALL METHOD picture_control_1->set_display_mode
        EXPORTING
          display_mode = cl_gui_picture=>display_mode_stretch.
      CALL METHOD picture_control_1->set_position
        EXPORTING
          height = 50
          left   = 40
          top    = 30
          width  = 190.
    CHANGE POSITION AND SIZE ABOVE****************
    IF url IS INITIAL.
    REFRESH query_table.
        query_table-name  = '_OBJECT_ID'.
    CHANGE IMAGE NAME BELOW UPLOADED IN SWO0*****************
        query_table-value = 'ENJOYSAP_LOGO'.
        APPEND query_table.
        CALL FUNCTION 'WWW_GET_MIME_OBJECT'
          TABLES
            query_string        = query_table
            html                = html_table
            mime                = pic_data
          CHANGING
            return_code         = return_code
            content_type        = content_type
            content_length      = content_length
          EXCEPTIONS
            object_not_found    = 1
            parameter_not_found = 2
            OTHERS              = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        CALL FUNCTION 'DP_CREATE_URL'
          EXPORTING
            type     = 'image'
            subtype  = cndp_sap_tab_unknown
            size     = pic_size
            lifetime = cndp_lifetime_transaction
          TABLES
            data     = pic_data
          CHANGING
            url      = url
          EXCEPTIONS
            OTHERS   = 1.
            ENDIF.
            CALL METHOD picture_control_1->load_picture_from_url
        EXPORTING
          url = url.
    ENDFORM.
    Thks and waiting for your replies.

    Hi ataran,
    in case, your version of iMovie is able to import the footage, have a read here:
    http://www.apple.com/ilife/tutorials/imovie/

  • Inserting Clip Art In A Pages 09 Document

    How do you insert clip art in to a Pages 09 document? I am new to iWork after using Appleworks for many years. I have many CDs of Nova Art Explosion Clip Art that I want to use in my documents. I can not seem to find any information on how to insert clip art. All help greatly appreciated.

    John,
    Just to let you know Pages does not use .wmf and .pict is mostly history now.
    *The main formats that Pages will use are:*
    .jpeg, jpeg2000, .tif, .png, .gif, .pdf and .ai saved with .pdf preview.
    Of the *Nova Art Explosion Clip Art* the most useful will be the vector .eps files which Pages will convert to .pdf when imported.
    *Best is to open and convert the .eps clipart in Preview*
    Which does several things:
    1. It converts them to .pdf
    2. It converts them to color managed cmyk
    3. It shrinks the image selection to the image's bounding box ie gets rid of all the background and only selects the image.
    4. As long as there is no opaque background drawn as part of the clipart, you will have a transparent background.
    5. It will save the file as a very small .pdf file
    6. The pdf file will be viewable in Finder on the *Icon Preview* or in CoverFlow, also when you view it in your *Open dialog box*.
    *There are 4 ways to import the clipart*
    1. Drag and drop it into Pages from Finder.
    If you drop it into text it will become an inline graphic and act as it it was a character in the text, moving with the text.
    If you drop it on a non-text area it will create its own image box and fill it.
    If you drag it onto an image placeholder box it will either neatly fit into the image box or be cropped, however the box has been set-up.
    2. You can use +Menu > Import > Choose… > browse to image > select > OK+ This will drop the image into the middle of your page view at its original size in its own image box.
    3. You can make a collection of clipart in a named folder then drag that folder into the top pane of the Media Browser:
    +Menu > View > Show Media Browser > Photos+
    When you click on the folder in the Media Browser the contents will be displayed in the preview window underneath from where they can be dragged into the Pages layout or onto image boxes.
    4. Pages has something called Shapes which you can add by going to the Shapes menu on the window Toolbar. These are native Pages drawings. They can be scaled, colored and contain text or images which are cropped by the shape.
    Right at the bottom of the Shapes menu is a pen tool which lets you draw your own shapes, however it is one of the worst drawing tools I have encountered on the Mac.
    Shapes can be imported from .svg files. .svg is an open vector or vector + bitmap file format readable directly in most *Web Browsers*. Unfortunately they are not directly supported in Pages, but they can be imported using svg2key into Keynote as shapes, from where they can be cut and pasted into Pages.
    OmniGraffle has sets of clipart called Stencils, these can be cut and pasted into Keynote and possibly into Pages, but requires you to have a copy of OmniGraffle on your machine.
    A great deal of commercial and free clipart is available on the Net, much of it substantially better than the crude, cheap looking Nova material which was mostly "sourced" from PC clipart nad has that sort of style and color palette.
    ClipArt can be very good and can be very bad, make sure you select the appropriate style and format for your work. You can scour through the Nova collection for the few good examples and make your own selection converted to useful formats such as .pdf and keep them in labelled folders which you can then select from previews using large *Icon View* or CoverFlow in Finder.
    You can also copy and paste clipart from AppleWorks.
    Peter

  • Color Correcting Clips With Dissolves

    When you're color correcting clips in a sequence with dissolves, are you color correcting the entire clip or just the part before or after the dissolve?
    Do you have to remove other effects to color correct the whole clip?
    Sure hope not but there seems to be a color change in playback when I hit the dissolves between clips.
    Haven't rendered yet but have made a lot of changes to the color in a long and cutty sequence.

    I imagine that the color changes you are seeing are because the sequence is not fully rendered. Do a test by fully rendering just a section.
    And yes, you are color correcting the clip including any transitions in and out.
    Message was edited by: Michael Grenadier

  • Why did my audio & video lines change colors?

    I was working in a sequence when suddenly all my lines changed colors on me. The audio and video lines are the exact same shade of blue and its very disorienting. Even after I  alter an audio clip in Audition the colors don't change. I've tried quitting, restarting my mac, opening older projects... I can't get the original colored lines back. Is this some new software update? How do I get the different colored lines back?

    Okay let me rephrase. The color change is weird but not a major issue. The major issue is that my audio waveforms aren't being displayed anymore.
    Even after I expand that audio line theres no waveform... I need to see where my audio is peaking. Any idea whats going on or how to fix?

  • Clip Art with Elements 11 ???

    I have never used Photoshop products before.  I bought Elements 11.  My main purpose for buying it is to use my drawings to create color and black and white clip art to sell on my education web site.  Can anyone offer assistance?  I do have a scanner, to scan my drawings with.  THANK YOU!
    Stacia

    If possible, scan your work as a tiff file. Also make a PSD copy as these can be opened, placed or dragged into other Adobe applications such  as Illustrator or In design.
    Open your image in Expert Mode and use the menu:
    File >> Save As
    Then choose PSD from the drop down file format menu.

  • Reducing AI size for clip art (wmf or emf) CS3 on Windows

    Hello All -
    I was actually in an Adobe workshop last week with an Adobe goddess and she was not able to answer this question - so unfortunately, I do not have much hope. But the last question I asked on this forum was answered so quickly and accurately I thought I would give it a shot!
    I am creating clip art for a client who has decided they can only use .wmf or .emf files for their application. My illustrations, when exported to .wmf, are around 3MB. Obviously, for clip art this is much to large, since these files are typically around 7-15 KB.
    I have tried numerous ways to reduce my file size drastically, (including merging, saving as older versions, tiff's & png's and reimporting, correcting in photoshop...) and the only way that has produced a small enough file size was to remove any beauty in my illustrations and make them completely flat, solid, colors. At first, the client was pleased with the results, but has now decided they are not pleased and want to be able to use the original illustrations that I provided and still have a small file size.
    Suggestions?

    Your client is painting you into an impossibly small corner, and for no reason. Large posters such as you will be producing are printed on expensive inkjet plotters, operated by professional print service bureaus. Those people use professional graphics programs, including Illustrator. They would most likely prefer either native files (ie: Illustrator) or PDFs. Your client is asking for impossibly small EMF files because... well there’s no way to logically finish that sentence. Probably that’s the format they grew up with or that they were told works best with Microsoft Word. Perhaps it did, too, in the 1990s.
    Since quality of image is probably the most important factor, anything you do to make smaller size or EMF compatibility a priority will compromise that, probably for no good reason. See if the print shop will accept PDF. See if the client can work with PDF, if the client feels some need to work with the files.

  • Change color to won't work

    So I rendered a c4d scene, and in it was a tilted plane with the default material on it if you say "create new material". I noticed that the more tilted it was flat, the more gray it appeared, and the more it showed to the camera, the more white it was, so I figured i'd try to fix it with change color to in after effects, however it will not work and nothing happens. if I change the change hue to change hue and lightness, I see the desired color I want in the background, but it completely messes everything up. I need an answer ASAP so any reply on how to fix the gray plane thing in cinema4d or my change color to would be appreciated.
    Thanks
    Edit: Extra info
    I have cinema 4d studio r14
    Up to date After Effects CC
    Quicktime is installed
    Im on Windows 7

    Well, no offense, but you seriously should read the C4D help. That's normal specular shading behavior and it is uniform acroos the plane because you obviously haven't defined any scene lights and use the default viewport light. Read up on how to create materials and adjust there properties and then learn the fine art of scene lighting as well as how to use object buffers to isolate objects with multipass renders.
    Mylenium

  • Clip Art Showing as Wav file

    I am having aproblem on multiple computers where the clip art images downloaded from the Internet are showing as .wav files.
    I have cleared the Temporary Internet Files and temp folder on the hard drive. I have also verified that the image is (for example) and jpeg and the file is supposed to open with Windows Picture and Fax Viewer.
    Nothing has worked and I am getting quite frustrated. I have checked the kb that Microsoft has on their web page and did what they mentioned, but we are also not using a proxy so that can't be the issue.
    Any information anyone could provide would be great and appreciated!
    Thank you

    Dear Tiffany,
    This issue usually occurs because of the un-proper settings in IE. Based on the current situation, I suggest trying some methods to troubleshoot the issue and check
    if the problem can be resolved.
    Method 1: Check the program that opens the clip art picture
    =========
    Right click the clip art picture and choose
    Properties. In the General tab, make sure
    Internet Explorer is selected after Option with. If Windows Media Player is selected, please click the
    Change button and change it to Internet Explorer.
    Check the issue again. If the problem persists, let’s continue.
    Method 2: Reset IE settings
    ================
    1.      
    Exit all programs, including Internet Explorer (if it is running).
    2.      
    Click
    Start. Type the following command in the
    Search box, and then press ENTER:
    inetcpl.cpl
    3.      
    The
    Internet Options dialog box appears.
    4.      
    Click the
    Advanced tab.
    5.      
    Under
    Reset Internet Explorer settings, click
    Reset. Then click Reset again.
    6.      
    When Internet Explorer finishes resetting the settings, click Close in the
    Reset Internet Explorer Settings dialog box.
    7.      
    Start Internet Explorer again and check the issue.
    Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
    you, please feel free to let me know.
    Best Regards,
    Sally Tang

  • CS3 w/Vista and My Clip Art Collection

    Hi - have had CS3 for about six months but just now getting deep into using it (good bye Quark!). Tried to use some clip art from my collection and it gives me a message that the type can't be opened and is not compatible. In the controls I have them all turned on - .bmp, .tif and of course, even the .jpegs! But it will take nothing off the CDs. It imports and uses clipart from lots of other sources, but declines any of my CDs. I even tried cut, past and copy in the clip board - but it does the same thing. Now, granted they are ten years old on average - but the base format did not change - did it? Also, I had no problem opening them with my 7.1 Adobe Pagemaker under Vista, or at this time with any other program on the same computer. HELP!

    Not only does WMF not support CMYK (no big deal in this day an age)
    there's no apparent support for bezier curves, either.
    So, anything that looks like it has curves really has lots of little
    straight line segments. If you scale it up, you wind up with the same
    problem you have with raster images.
    FWIW, the only program I've found that does a good job of creating WMFs
    is CorelDRAW. Illustrator's capabilities there are awful unless I
    haven't been able to find some settings for smoothing out the curves.
    Circles usually wind up looking like octagons.
    Bob

  • Adding clip art to the "Extras" in PSE 11

    Is it possible to add more clip art to the "Extras" (to be included "on" slides) in Adobe Photoshop Elements 11? I note that there is a clip art folder in Premiere Elements 11 but can find no such thing for Photoshop Elements 11.
    Can this be done.
    Thanks in advance,
    Dale

    In Acrobat XI we have provided user customization of the tools and you can now add the 'Strikethrough' (is this what you mean by "StrikeOut"?), 'Underline', and more quite simply to the Toolbar.
    Simply right-click on the menu bar which in turn brings up the Tools context menu, and select "Edit Current Tool Set..." - this is the Customization menu.  Here you can add any single tools and any others to the Tool Bar, and/or also create custom Tool Sets for the Right-Hand panel, which consist of only the tools you are interested in having in your Tool Set.
    I am fairly certain that we don't support adding or changing Registry Entries for customizing Acrobat, nor ever have.  If you decide to persist in this manner, you are on your own.
    Thanks
    Mark Tezak

Maybe you are looking for