Change color on toolbar underline

I have found the fmtoolbar.ini file and I want to
change the color of the underline and font to red when the toolbar button is clicked on. Is there any way to do this?? Thanks in advance for all your help.

[email protected] wrote:
Van, I was thinking that I could change the toolbar button to do the same thing as the Character Designer. Every once in awhile that toolbar button gets used, not very often, but it can mess us up when all the formatting is removed and new formatting is imported. The reason the formatting is changed is the font size is larger for the Legislature to review the documents. We go from a 10pt font to a 12pt font so they can read it easier. We charge the agencies who submit dockets to us by the page so the font is smaller than what the Legislature reviews. They don't pay for anything we send to them. For some reason the underline from the toolbar button is lost and never to be seen again when the formatting is removed and reapplied from a different template. If that won't work that is the way it is. I didn't know if it could be done or not. It sounds like it might be easier to disable the toolbar button and not worry about it. Thanks for your help.
Have a Great Day
Ed Hawley
Office of Administrative Rules
332.1823
[email protected]
It sounds as if you want to avoid misuse of the underline formatting button, and perhaps some others.
The FrameMaker customization manual here: http://www.adobe.com/support/documentation/en/framemaker/ describes how to make changes to menus and toolbars. It's possible to remove items from menus and toolbars. Would that work for you?
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Similar Messages

How can i change bookmarks text colors, not toolbar text color.

I know how to change color of toolbar text but still want to change the text color of bookmarks.

You can experiment with code like this in the userChrome.css file.
*http://kb.mozillazine.org/userChrome.css
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#personal-bookmarks .bookmark-item > .toolbarbutton-text {color:#000!important; background-color:-moz-dialog!important}
</nowiki></pre>
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration

When composing new email (gmail) tool bar showing fonts, colors, bold, italics, underline, etc. is missing? When using Internet Explorer the bar is there.

When using Firefox, the tool bar above the "compose mail" window is missing. I cannot change fonts, use bold, italics, underline, change colors, align margins, etc. When using Internet Explorer the bar IS there but I prefer Firefox, as it is much faster. My operating system is Vista.

Thanks Tony T1, I have tried using the Mail -> Format drop downs...
... and using the format toolbar...
... and in both cases, Bold and Italic is greyed out... (bit hard to see in the second screenshot, but it is, honest!)
The mail message is def set as Rich Text, which you can see in the first screenshot, as the option to Make Plain Text is there...

Change color of List link

Hi,
I'm trying to change the color of the links in one of my Lists. Can somebody please tell me how to do this? I'm not sure where to put it or what the syntax is.
Thanks,
Nora

Take a look at:
Change color of row links
Basically, create a class for your links and change the attributes using the :link,:visited,and :hover pseudo-classes. Even better, apply a class to the UL element, such as "myList" then add the following to your css:
ul.myList li a:link,ul.myList li a:visited{color:#00ff00;text-decoration:none;}
ul.myList li a:link,ul.myList li a:hover{color:#ff0000;text-decoration:underline;}
That way you don't have to repeat the 'class=".." ' for every link in your li, thus reducing the size of the page.
Thanks,
Tyler

How to change color of a button for specific time interval in jsp

How to change color of a button for specific time interval in jsp.
Please help.
Thanks in advance.

This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
_The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
I hope this works for you too.

Why don't my hyperlinks change color?

My hyperlinks don't change color when I try them in a browser or on my iWeb site. They all work fine but I don"t get that satisfying color change. I am using iWeb 06. Do I have to upgrade to 08?

If it's not your taste it's unsatisfying and problematic to you which should be enough to justify a inquiry towards solution without option about what others think is unsatisfying or not to them.
You posted about iWeb '06 here's a solution for said version.
When you Publish from iWeb you get a .HTML file and a .CSS file for each page you've created. The CSS is the styles for each of your pages and the color of the hyperlinks is a style you want to change.
When you look at the CSS file opened in Text Edit it will have a section that looks like this:
a {
color: #453c3c;
text-decoration: underline;
a:visited {
color: #666666;
text-decoration: underline;
a:hover {
color: #000000;
text-decoration: underline;
You can change the alpha-numeric values for the regular, hover and visited behaviors of how the color changes for your links.
Hope that helps!

Quick Launch Mute Button Not Changing Color

When I press the mute button on the Quick Launch toolbar, it does not change to orange any longer. It remains blue. The functionality still works, but it does not change color.

installed IDT High Definition Audio CODEC Driver. works fine now

Reader converts text with http in it clickable. How to have it be colored and/or underline?

I've got a word document with text that contains http://blabblah.com which is not hyperlinked in word. I save it as a PDF file. When I read it with Adobe Reader, it will recognize it as a link since it starts with http:// and will make it clickable which is fine. But, I also want it to change the font, color and/or underline it to make it appear as a link and not just text. How do I do that in Adobe Reader? Is there a setting I can change or ???

Adobe Reader cannot do this. Even in Adobe Acrobat it is tedious and uncertain task. Set all the font attributes in Word.

Why do I get a program error when changing colors?

I get a 'Could not complete your request because of a program error' when I try to change colors on both the forground/background palette or from the color picker palette. Is there a patch for this?
I am using Photoshop CS6 version 13.0.1.x64

Hi. Because this forum is for beginners trying to learn the basics of Photoshop, I'm moving your question to the Photoshop General Discussion forum.

How to change Hyperion plannin toolbar in workspace?

Hi,all
I made some changes in the toolbar of Hyperion Plannin,and I restart the HP service,and the changes have effect when i login HP in url:Http://server:19000/HyperionPlanning or Http://server:8300/HyperionPlanning , it supposed to be good too if i login HP application when i use this url:http://server:19000/workspace, but wired it does not changed. I think the HP in workspce use the same source file as the pre-URL,can anyone tell me how can i make the changes have effect in hyperion plannin using workspace?
thanks alot!!
Edited by: tony.lee on 2012-9-20 下午8:41

Hi,Vivek
Thanks for reply！I do delete all the .class files which are in the directory $IstallDir/user_projects\domains\EPMSystem\servers\Planning0\tmp\servers\Planning0\tmp\_WL_user\PLANNING_11.1.2.0\3i5tnd\jsp_servlet. The Directory you mentioned contains a lot of files and dirctories, should it suitable if delete them all?

Images Change Colors between monitors while the UI stays the same

Hey! Im having an issue where photoshop changes the colors when I move the window between my monitors, seen here: http://sta.sh/04y5s60vf3j This isnt due to the monitors themselves being different, it actually changes after a few seconds of moving it inbetween the monitors. The left one has been callibrated with a spyder 3 elite which I no longer have access to. I applied the file with windows color management instead of the spyder utility. The second one is new, and it is not callibrated by anything, but instead was done by hand with the built in brightness/contrast/custom RGB settings. Both of them are very close to eachother, enough so for my tastes. but when photoshop changes what the image looks like, it's causing problems. Interestingly enough, when I disable callibration for the monitor on the left, the image does not change colors between monitors, but instead always appears as it does on the right. but then they don't match up and the whole screen looked washed out because it's uncallibrated, so that doesnt do me any good. Another interesting thing to point out, is when this image is saved as a .JPG, and viewed with firefox the image appears exactly like the monitor on the LEFT (which is my main monitor) despite the left monitor being the one that is force changed. does anyone have any suggestions? It also appears that windows photoviewer is behaving the same way, though firefox does not. Meaning when I open an image in all 3 on the left monitor, they look the same, but when opened on the right monitor, windows photo viewer and photoshop both display the image as brighter and redder than firefox does. This is frustrating, because it seems photoshop is changing the image with my callibration on my left monitor to match what it looks like on the web, which it does. but it doesn't do this for the right monitor, or when the left is uncallibrated. Another issue I can see with this is even if the UI is the same shade of gray, the images are different between the monitors because of this change. Does anyone have any suggestions?
- BD

Alright! So I reread through all this, poked at some things on the internet, and I'm going to attempt to summarize what would be a good solution for all this (And it seems, it still won't be perfect, but to get myself into the best environment I can for not messing with images for an hour trying to make them look nice before I post them to the web. I painted something yesterday on the cintiq, popped it over to my laptop screen and it just looked washed out and terrible.)
1. Get a X-rite EODIS3 i1 Display Pro, Callibrate laptop and cintiq. I do have the money to drop on something like this, especially if it's a time saver.
     Things I'm not sure about:
          a. There was a ton of complaints about the software not working when I checked reviews, but also a ton that said everything was great. most of them were mac users though.
          b. I'm not sure if problems would still be posed, even while calibrated, by me having a wide gamut monitor.
          c. I'm a terrible excuse for a human being and I think the colors showing up brighter on the wide gamut screen is pretty (I should just make my images this bright on a normal screen and there won't be any issues. >.>)
2. Set Firefox to color manage (easy enough)
3. Change my photoshop working space to sRGB (since they'll have been calibrated at this point)
3. Accept the fact that most of the people who look at my work will be doing so on a monitor that is almost certainly uncalibrated, and I can't control what they will see on my screen, but I CAN control if the colors are -actually- what I want them to be on any properly calibrated device. which is probably the best way to go anyways.
4. Make paintings, have fun.
Now, you two have been going on about all sorts of interesting things in here, and it seems that calibration issue run much much deeper than I ever thought. Do either of you have recommendations for how I should tweak this list of things to do or other things I can/ should do? I'm not currently a working professional, but if I have anything to say about it, I will be within a few years (I'm going to school for illustration and studying concept design on my own time) so it'd be useful for me to get into good habits now.
- Brendavid

Can anyone tell me why a picture would change color when I try to download/upload it? It is the exact same picture- chosen the same way and when it goes to any other program it changes the color (I've tried canvas on demand and mpixpro. I've also tried

Can anyone tell me why this picture changes color when I try to download/upload it? It is the exact same picture I have taken from the same location. The image on the left is via preview and the image on the right is what is shows like when I try to download it. I have emailed it to myself and it shows fine on the computer and in CS4, but when I look at the download via my phone or on another computer it shows the wonky color on the right. I have checked the color space shows RGB/8 bit. Any ideas why or how to fix it? It isn't with any one specific session.... and I've tried it on both my desktop and my laptop- saved image to an external hard drive and to drop box. I've tried sending the image to canvas on demand, my email, mpxipro, POST editing- all the same result. Please HELP!! What am I doing wrong?

Most of the time you see something like that. The image in question has a color profile other then sRGB. Some image viewers/displayers are color managed and others are not. So the image do not look the same in all of the applications you use. So colors seem to change.
Try converting it to sRGB color and see if then looks the same all around. Also I think PC and Mac displays are set to different gamma something like 1.8 and 2.2
Though I'm colorblind I even see color variations.

How to change color of selected label from list of labels?

My Problem is that I have a list of labels. RowHeaderRenderer is a row header renderer for Jtable which is rendering list items and (labels).getListTableHeader() is a method to get the list. When we click on the label this code is executed:
getListTableHeader().addMouseListener(new MouseAdapter()
public void mouseReleased(MouseEvent e)
if (e.getClickCount() >= 1)
int index = getListTableHeader().locationToIndex(e.getPoint());
try
if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
AcknowledgeEvent ackEvent = new AcknowledgeEvent(
this, (ae_AlertEventInfo)theAlerts.values().toArray()[index]);
fireAcknowledgeEvent(ackEvent);
((HeaderListModel)listModel).setElementAt(ACK, index);
catch(Exception ex) {;}
Upon mouse click color of the label should be changed. For some period of time ie. Upto completion of fireAcknowledgeEvent(ackEvent);
This statement is calling this method:
public void handleAcknowledgeEvent(final AcknowledgeEvent event)
boolean ackOk = false;
int seqId = ((ae_AlertEventInfo)event.getAlertInfo()).sequenceId;
if (((ae_AlertEventInfo)event.getAlertInfo()).ackRequiredFlag)
try
// perform call to inform server about acknowledgement.
ackOk = serviceAdapter.acknowledge(seqId,
theLogicalPosition, theUserName);
catch(AdapterException aex)
Log.error(getClass(), "handleAcknowledgeEvent()",
"Error while calling serviceAdapter.acknowledge()", aex);
ExceptionHandler.handleException(aex);
else
// Acknowledge not required...
ackOk = true;
//theQueue.buttonAcknowledge.setEnabled(false);
final AlertEventQueue myQueue = theQueue;
if (ackOk)
Object popupObj = null;
synchronized (mutex)
if( hasBeenDismissed ) { return; }
// mark alert event as acknowledged (simply reset ack req flag)
ae_AlertEventInfo info;
Iterator i = theAlerts.values().iterator();
while (i.hasNext())
info = (ae_AlertEventInfo) i.next();
if (info.sequenceId == seqId)
// even if ack wasn't required, doesn't hurt to set it
// to false again. But it is important to prevent the
// audible from playing again.
info.ackRequiredFlag = false;
info.alreadyPlayed = true;
// internally uses the vector index so
// process the queue acknowledge update within
// the synchronize block.
final ae_AlertEventInfo myAlertEventInfo = event.getAlertInfo();
SwingUtilities.invokeLater(new Runnable()
public void run()
myQueue.acknowledge(myAlertEventInfo);
myQueue.updateAcknowledgeButtonState();
// here we should stop playing sound
// if it is playing for this alert.
int seqId1;
if (theTonePlayer != null)
seqId1 = theTonePlayer.getSequenceId();
if (seqId1 == seqId)
if (! theTonePlayer.isStopped())
theTonePlayer.stopPlaying();
theTonePlayer = null;
// get reference to popup to be dismissed...
// The dismiss must take place outside of
// the mutex... otherwise threads potentially
// hang (user hits "ok" and is waiting for the
// mutex which is currently held by processing
// for a "move to summary" transition message.
// if the "dismiss" call in the transition
// message were done within the mutex, it might
// hang on the dispose method because the popup
// is waiting for the mutex...
// So call popup.dismiss() outside the mutex
// in all cases.
if(event.getSource() instanceof AlertEventPopup)
popupObj = (AlertEventPopup)event.getSource();
else
popupObj = thePopups.get(event.getAlertInfo());
thePopups.remove(event.getAlertInfo());
SwingUtilities.invokeLater(new Runnable()
public void run()
// search vector elements to determine icon color in main frame
String color = getColor();
fireUpdateEvent(new UpdateEvent(this, blinking, color));
// Call dismiss outside of the mutex.
if (popupObj !=null)
if(popupObj instanceof AlertEventPopup)
((AlertEventPopup)popupObj).setModal(false);
((AlertEventPopup)popupObj).setVisible(false); // xyzzy
((AlertEventPopup)popupObj).dismiss();
else
// update feedback... ack failed
SwingUtilities.invokeLater(new Runnable()
public void run()
myQueue.setInformationMessage("Acknowledge failed to reach server... try again");
return;
Code for RowHeaderRenderer is:
class RowHeaderRenderer extends JLabel implements ListCellRenderer
JTable theTable = null;
ImageIcon image = null;
RowHeaderRenderer(JTable table)
image = new ImageIcon(AlertEventQueue.class.getResource("images" + "/" + "alert.gif"));
theTable = table;
JTableHeader header = table.getTableHeader();
setOpaque(true);
setHorizontalAlignment(LEFT);
setForeground(header.getForeground());
setBackground(header.getBackground());
setFont(header.getFont());
public Component getListCellRendererComponent( JList list, Object value,
int index, boolean isSelected, boolean cellHasFocus)
int level = 0;
try
level = Integer.parseInt(value.toString());
catch(Exception e)
level = 0;
if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
setBorder(UIManager.getBorder("TableHeader.cellBorder"));
this.setHorizontalAlignment(JLabel.CENTER);
this.setVerticalAlignment(JLabel.CENTER);
setIcon(image);
else
setBorder(BorderFactory.createLineBorder(Color.gray));
setText("");
setIcon(null);
return this;
I tried but when i am clicking a particular label, the color of all labels in the List is being changed. So can you please assist me in changing color of only the label that is selected and the color must disappear after completion of Upto completion of fireAcknowledgeEvent(ackEvent);

im a bit confused with the post so hopefully this will help you, if not then let me know.
I think the problem is that in your renderer your saying
setBackground(header.getBackground());which is setting the backgound of the renderer rather than the selected item, please see an example below, I created a very simple program where it adds JLabels to a list and the renderer changes the colour of the selected item, please note the isSelected boolean.
Object "value" is the currentObject its rendering, obviously you may need to test if its a JLabel before casting it but for this example I kept it simple.
populating the list
public void populateList(){
        DefaultListModel model = new DefaultListModel();
        for (int i=0;i<10;i++){
            JLabel newLabel = new JLabel(String.valueOf(i));
            newLabel.setOpaque(true);
            model.addElement(newLabel);
        this.jListExample.setModel(model);
        this.jListExample.setCellRenderer(new RowHeaderRenderer());
    }the renderer
class RowHeaderRenderer extends JLabel implements ListCellRenderer
    JTable theTable = null;
    public Component getListCellRendererComponent(JList list, Object value,
                                                  int index, boolean isSelected, boolean cellHasFocus){
        JLabel aLabel = (JLabel)value;
        if (isSelected){
            aLabel.setBackground(Color.RED);
        }else{
            aLabel.setBackground(Color.GRAY);
        return aLabel;
}

Changing color without modifying existing items.. problem!

Hello,
I'm reletively new to flash, and am trying to modify a template and am running into a problem and I don't seem to know why Flash is acting so strange.
I am going into a movie clip to edit the color of an item, and when I do so with a tint, it overrides any additional effects such as light, and text. The color appears almost as if it were just slapped on top of everything.
When I edit the color in advanced mode, it is really a hit-or-miss to get the correct color, and will only modify when changing the offset RGB.
And also when doing this, the text gradually changes color, for example: there are 4 items in total that I want to edit the color of. Each item is a different colored box with text on the front (for a main Navigation of the website). --- The first item, the text will stay white. Gradually through the second and third items it starts to change, and by the fourth / last item, the text is completely blue.
Is it possible for a portion of text to be connected somehow to an object within the animation in a movieclip? If so, is it possible to go inside and edit this? -the shape, animation, and text?
Is there an easier way to change the color of an item inside a movie clip? I can supply additional information if needed.. files etc.
Am I doing something wrong / completely missing something?
Thank you very much in advance for any help and/or advice!
New Flasher,
Lisa

go one level deeper than the movieclip so you're editing the shape.

Change color in ALV top of page

Hi all,
Can anyone tell me how (if it is possible) to change color in ALV top-of-page?
Thank you in advance,
Hagit

Hi,
It is not possible to change the color in ALV top of page.
Thanks,
Sriram Ponna.

Change color on toolbar underline

Similar Messages

Maybe you are looking for