Change color to monochrome at shutdown time as Windows XP does

Hi to all!
I want to make an effect as in Windows XP when you select the shutdown item from the start menu and Windows brings up a dialog where the user is asked whether he wants to shutdown or restart. At the time the dialog is shown Windows changes the colors of all background applications and windows to monochrome color. I like this effect and want to implement it in my application where I also have a dialog to ask the user whether he wants to exit my application.
Has anybody an idea if this is possible and how?
And if this is possible how to 're-activate' the old color when the user doesn't want to exit.

I've always found that effect very annoying. The way the colors fade out makes it seem like there's a time limit--like if you don't select one of the options before the screen goes black, the computer will choose one itself. Then, when you do click on a button, the colors all spring back to normal, which makes no sense. If you really are shutting down or restarting, the colors should stay faded out; they should only go back to normal if you select "Cancel".
Just thought you should know that all your users might not appreciate that particular featurette. And, thank you for the opportunity to get that rant out of my system.

Similar Messages

  • I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the app does not accept the change, and automatically enters its own time. Am I doing something wrong?

    I am having issues with adjusting the duration of time for each still frame and transition in imovie 11.  Each time that I adjust these times, the application does not accept the change, and instead automatically enters its own time. Is there a work around this? Or am I doing something wrong? Please Help!
    Thank you,
    lagrl

    Have you tried turning off automatic transitions ? Choose file - project properties and follow the dialogue box to change duration with a slider.  iMovie also doesn't allow a transition to be more than 50% duration of the clip its attached to. In other words if the clip is 4 seconds the transition cannot be more than 2 seconds and remember that relates to the first clip as the following clip (right side) is pulled back to overlay it.
    Does this help.  Perhaps you already know this ?

  • Images Change Colors between monitors while the UI stays the same

    Hey! Im having an issue where photoshop changes the colors when I move the window between my monitors, seen here: http://sta.sh/04y5s60vf3j This isnt due to the monitors themselves being different, it actually changes after a few seconds of moving it inbetween the monitors. The left one has been callibrated with a spyder 3 elite which I no longer have access to. I applied the file with windows color management instead of the spyder utility. The second one is new, and it is not callibrated by anything, but instead was done by hand with the built in brightness/contrast/custom RGB settings. Both of them are very close to eachother, enough so for my tastes. but when photoshop changes what the image looks like, it's causing problems. Interestingly enough, when I disable callibration for the monitor on the left, the image does not change colors between monitors, but instead always appears as it does on the right. but then they don't match up and the whole screen looked washed out because it's uncallibrated, so that doesnt do me any good. Another interesting thing to point out, is when this image is saved as a .JPG, and viewed with firefox the image appears exactly like the monitor on the LEFT (which is my main monitor) despite the left monitor being the one that is force changed. does anyone have any suggestions? It also appears that windows photoviewer is behaving the same way, though firefox does not. Meaning when I open an image in all 3 on the left monitor, they look the same, but when opened on the right monitor, windows photo viewer and photoshop both display the image as brighter and redder than firefox does. This is frustrating, because it seems photoshop is changing the image with my callibration on my left monitor to match what it looks like on the web, which it does. but it doesn't do this for the right monitor, or when the left is uncallibrated. Another issue I can see with this is even if the UI is the same shade of gray, the images are different between the monitors because of this change. Does anyone have any suggestions?
    - BD

    Alright! So I reread through all this, poked at some things on the internet, and I'm going to attempt to summarize what would be a good solution for all this (And it seems, it still won't be perfect, but to get myself into the best environment I can for not messing with images for an hour trying to make them look nice before I post them to the web. I painted something yesterday on the cintiq, popped it over to my laptop screen and it just looked washed out and terrible.)
    1. Get a X-rite EODIS3 i1 Display Pro, Callibrate laptop and cintiq. I do have the money to drop on something like this, especially if it's a time saver.
         Things I'm not sure about:
              a. There was a ton of complaints about the software not working when I checked reviews, but also a ton that said everything was great. most of them were mac users though.
              b. I'm not sure if problems would still be posed, even while calibrated, by me having a wide gamut monitor.
              c. I'm a terrible excuse for a human being and I think the colors showing up brighter on the wide gamut screen is pretty (I should just make my images this bright on a normal screen and there won't be any issues. >.>)
    2. Set Firefox to color manage (easy enough)
    3. Change my photoshop working space to sRGB (since they'll have been calibrated at this point)
    3. Accept the fact that most of the people who look at my work will be doing so on a monitor that is almost certainly uncalibrated, and I can't control what they will see on my screen, but I CAN control if the colors are -actually- what I want them to be on any properly calibrated device. which is probably the best way to go anyways.
    4. Make paintings, have fun.
    Now, you two have been going on about all sorts of interesting things in here, and it seems that calibration issue run much much deeper than I ever thought. Do either of you have recommendations for how I should tweak this list of things to do or other things I can/ should do? I'm not currently a working professional, but if I have anything to say about it, I will be within a few years (I'm going to school for illustration and studying concept design on my own time) so it'd be useful for me to get into good habits now.
    - Brendavid

  • How to change color of a button for specific time interval in jsp

    How to change color of a button for specific time interval in jsp.
    Please help.
    Thanks in advance.

    This was driving me crazy, too--and the previous answers did not seem to work. I eventually found that if I click one of the data symbols in the graph in exactly the right spot (see below), it selects only the data symbols and not the line. I can tell this because the little selection dots will be around each data symbol, but no selection dots will be on the line between the data symbols - like the graphic in Yvan's answer. Then and only then will the color symbol in the tool bar show the color of the data symbol, instead of the color of the line. I believe that you then have to first click on the color swatch in the toolbar and then select your color (or choose Show Colors and select from the color tool). Just clicking a color in the crayon box, for example, did not seem to work unless I first clicked on the color swatch in the toolbar, then clicked Show Colors on that dropdown, and +only then+ clicked the crayon or whatever.
    _The right spot to click_ seems to be just above the exact center of the data symbol, at least for the diamond shape symbol that I prefer. Sometimes it takes several tries to hit the right spot. If I miss it, the whole line is selected, which is indicated by the little selection dots on the line, between the data symbols. When I click the right spot, those selection dots go away, leaving only the data symbols selected. Then I can change the color, as described above.
    I hope this works for you too.

  • What makes the color of the icon for my external HD change to the color of the icon for Time Machine?

    What makes the color of the icon for my external hard drive change to the color of the icon for Time Machine?

    Perhaps when you first connected the drive you were asked if you wanted this to be used for TM.  If you clicked yes it remembers that. 

  • Moving a rectangle or change color in "Run-Time "?

    First step, the objects of decoration you can modify its properties in "Run-Time "?
    Moving a rectangle or change color in "Run-Time "?
    I want to develop a mini SCADA application, where I have to do some animations usingsimple objects like Shapes.

    Yes, it is possible to modify decorations in runtime. An example is below.
    As you can see, you just need to get a reference to the front panel containing the decoraitions, and then use the Decos[] property to get an array of references to the decorations. These can be passed to a property node.
    Unfortunately, the decorations cannot be given a unique identifier, such as a label. So if you have multiple decorations, it can be tricky to modify the properties of a specific one. If you are only dealing with one shape, this won't be an issue. One roundabout way to pick out a particular decoration would be to search through the array references until you find the one with matching size and location on the front panel. Alternatively, you could use a disabled control, such as a boolean push button with no caption, and refer to that directly.
    Hope this helps.
    -Garrett

  • Very long shutdown time after Yosemite install

    After installing Yosemite my Macbookpro has shutdown times of over more than 5 minutes. This is what i got from Etrecheck.
    Problem description:
    very long shutdown time after yosemite install
    EtreCheck version: 2.1.8 (121)
    Report generated 19 Feb 2015 01:19:39 CET
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,2
        1 2 GHz Intel Core i7 CPU: 4-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 868
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
        AMD Radeon HD 6490M - VRAM: 256 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: one day 7:40:33
    Disk Information: ℹ️
        Hitachi HTS545050B9A302 disk0 : (500,11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 498.88 GB (90.86 GB free)
                Core Storage: disk0s2 499.25 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        LaCie LaCie Device 500,11 GB
            EFI (disk2s1) <not mounted> : 210 MB
            MINI DAVID HDD (disk2s2) /Volumes/MINI DAVID HDD : 499.76 GB (62.48 GB free)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/sysctl.conf - Exists
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Karabiner.app
        [not loaded]    org.pqrs.driver.Karabiner (10.2.0 - SDK 10.9) [Click for support]
            /Library/Parallels/Parallels Service.app
        [not loaded]    com.parallels.kext.prl_hid_hook (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_hypervisor (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_netbridge (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_usb_connect (7.0 15106.786747) [Click for support]
        [not loaded]    com.parallels.kext.prl_vnic (7.0 15106.786747) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.Avid.driver.AvidDX (4.7.1) [Click for support]
        [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
        [not loaded]    com.SafeNet.driver.Sentinel (7.3.0) [Click for support]
        [not loaded]    com.avid.driver.Avid_SCSI (1.2.0) [Click for support]
        [not loaded]    com.avid.driver.Avid_SCSI_RBC (1.2.0) [Click for support]
        [loaded]    com.cisco.kext.acsock (1.1.0 - SDK 10.2) [Click for support]
        [not loaded]    com.digidesign.fwfamily.driver (8.0.4f1) [Click for support]
        [not loaded]    com.digidesign.mbox2.boot.driver (8.0.4f1) [Click for support]
        [not loaded]    com.digidesign.mbox2.driver (8.0.4f1) [Click for support]
        [not loaded]    com.freecom.driver.BoulderScsi (1.0.0d1) [Click for support]
        [not loaded]    com.metakine.handsoff.driver (2.0.8 - SDK 10.6) [Click for support]
        [not loaded]    com.nvidia.CUDA (1.1.0) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport2 (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.master (5.7.2b8) [Click for support]
        [loaded]    com.rogueamoeba.HermesAudio (3.0.1) [Click for support]
        [not loaded]    com.sony.filesystems.pdudf (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.sony.filesystems.pdudfr (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.sony.scsi.PDW-U1 (4.03.0d006 - SDK 10.6) [Click for support]
        [not loaded]    com.wacom.kext.pentablet (5.3.5 - SDK 10.9) [Click for support]
            /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
        [not loaded]    com.paceap.kext.pacesupport.leopard (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.panther (5.7.2b8) [Click for support]
        [loaded]    com.paceap.kext.pacesupport.snowleopard (5.7.2b8) [Click for support]
        [not loaded]    com.paceap.kext.pacesupport.tiger (5.7.2b8) [Click for support]
    Startup Items: ℹ️
        ciscod: Path: /System/Library/StartupItems/ciscod
        CUDA: Path: /System/Library/StartupItems/CUDA
        Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
        DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
        PACESupport: Path: /Library/StartupItems/PACESupport
        ProTecVb: Path: /Library/StartupItems/ProTecVb
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [unknown]    c om.apple.coreservices.appleevents.plist [Click for support]
        [unknown]    c om.apple.diskarbitrationd.plist [Click for support]
        [unknown]    c om.apple.mDNSResponder.plist [Click for support]
        [unknown]    co m.apple.securityd.plist [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [loaded]    com.cisco.anyconnect.gui.plist [Click for support]
        [running]    com.epson.epw.agent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.metakine.handsoff.agent.plist [Click for support]
        [loaded]    com.nvidia.CUDASoftwareUpdate.plist [Click for support]
        [failed]    com.parallels.desktop.launch.plist [Click for support]
        [loaded]    com.parallels.DesktopControlAgent.plist [Click for support]
        [running]    com.parallels.vm.prl_pcproxy.plist [Click for support]
        [running]    com.wacom.pentablet.plist [Click for support]
        [running]    net.culater.SIMBL.Agent.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [failed]    com.autodesk.backburner_manager.plist [Click for support]
        [running]    com.autodesk.backburner_server.plist [Click for support]
        [failed]    com.autodesk.backburner_start.plist [Click for support]
        [running]    com.cisco.anyconnect.vpnagentd.plist [Click for support]
        [running]    com.digidesign.fwfamily.helper.plist [Click for support]
        [running]    com.edb.launchd.postgresql-8.4.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [running]    com.metakine.handsoff.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [running]    com.parallels.desktop.launchdaemon.plist [Click for support]
        [loaded]    com.rogueamoeba.hermes.plist [Click for support]
        [loaded]    com.rogueamoeba.instanton-agent.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
        [loaded]    PACESupport.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    User Login Items: ℹ️
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
        WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        Picasa: Version: 1.0 - SDK 10.4 [Click for support]
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
        CUDA Preferences  [Click for support]
        DigidesignMbox2  [Click for support]
        Digidesign Mbox 2 Pro  [Click for support]
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        MacFUSE  [Click for support]
        Perian  [Click for support]
        PenTablet  [Click for support]
        XDCAM Drive Monitor  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 498.88 GB Disk used: 408.02 GB
        Destinations:
            Time Capsule [Local]
            Total size: 799.52 GB
            Total number of backups: 18
            Oldest backup: 2014-11-12 02:44:18 +0000
            Last backup: 2015-02-17 14:14:45 +0000
            Size of backup disk: Too small
                Backup size 799.52 GB < (Disk used 408.02 GB X 3)
    Top Processes by CPU: ℹ️
            20%    mds
             5%    WindowServer
             2%    Google Chrome
             1%    launchd
             1%    prl_disp_service
    Top Processes by Memory: ℹ️
        515 MB    Final Cut Pro
        378 MB    softwareupdated
        309 MB    Google Chrome
        215 MB    Google Chrome Helper
        206 MB    mds_stores
    Virtual Memory Information: ℹ️
        220 MB    Free RAM
        3.56 GB    Active RAM
        3.34 GB    Inactive RAM
        1.45 GB    Wired RAM
        7.56 GB    Page-ins
        4 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 18, 2015, 04:35:18 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-163518_[redacted].crash
        Feb 18, 2015, 04:29:01 PM    /Library/Logs/DiagnosticReports/backburnerManager_2015-02-18-162901_[redacted]. crash
        Feb 18, 2015, 04:11:30 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-161130_[redacted].crash
        Feb 18, 2015, 04:04:44 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-160444_[redacted].crash
        Feb 18, 2015, 01:49:37 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-02-18-134937_[redacted].crash
        Feb 17, 2015, 05:36:32 PM    Self test - passed

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Shut down from safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Can anyone tell me why a picture would change color when I try to download/upload it?  It is the exact same picture- chosen the same way and when it goes to any other program it changes the color (I've tried canvas on demand and mpixpro.  I've also tried

    Can anyone tell me why this picture changes color when I try to download/upload it?  It is the exact same picture I have taken from the same location.  The image on the left is via preview and the image on the right is what is shows like when I try to download it.  I have emailed it to myself and it shows fine on the computer and in CS4, but when I look at the download via my phone or on another computer it shows the wonky color on the right.  I have checked the color space shows RGB/8 bit.  Any ideas why or how to fix it?  It isn't with any one specific session.... and I've tried it on both my desktop and my laptop- saved image to an external hard drive and to drop box.  I've tried sending the image to canvas on demand, my email, mpxipro, POST editing- all the same result.  Please HELP!!  What am I doing wrong?

    Most of the time you see something like that. The image in question has a color profile other then sRGB. Some image viewers/displayers are color managed and others are not.  So the image do not look the same in all of the applications you use. So colors seem to change.
    Try converting it to sRGB color and see if then looks the same all around. Also I think PC and Mac displays are set to different gamma something like 1.8 and 2.2
    Though I'm colorblind I even see color variations.

  • How to change color of selected label from list of labels?

    My Problem is that I have a list of labels. RowHeaderRenderer is a row header renderer for Jtable which is rendering list items and (labels).getListTableHeader() is a method to get the list. When we click on the label this code is executed:
    getListTableHeader().addMouseListener(new MouseAdapter()
    public void mouseReleased(MouseEvent e)
    if (e.getClickCount() >= 1)
    int index = getListTableHeader().locationToIndex(e.getPoint());
    try
    if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
    AcknowledgeEvent ackEvent = new AcknowledgeEvent(
    this, (ae_AlertEventInfo)theAlerts.values().toArray()[index]);
    fireAcknowledgeEvent(ackEvent);
    ((HeaderListModel)listModel).setElementAt(ACK, index);
    catch(Exception ex) {;}
    Upon mouse click color of the label should be changed. For some period of time ie. Upto completion of fireAcknowledgeEvent(ackEvent);
    This statement is calling this method:
    public void handleAcknowledgeEvent(final AcknowledgeEvent event)
    boolean ackOk = false;
    int seqId = ((ae_AlertEventInfo)event.getAlertInfo()).sequenceId;
    if (((ae_AlertEventInfo)event.getAlertInfo()).ackRequiredFlag)
    try
    // perform call to inform server about acknowledgement.
    ackOk = serviceAdapter.acknowledge(seqId,
    theLogicalPosition, theUserName);
    catch(AdapterException aex)
    Log.error(getClass(), "handleAcknowledgeEvent()",
    "Error while calling serviceAdapter.acknowledge()", aex);
    ExceptionHandler.handleException(aex);
    else
    // Acknowledge not required...
    ackOk = true;
    //theQueue.buttonAcknowledge.setEnabled(false);
    final AlertEventQueue myQueue = theQueue;
    if (ackOk)
    Object popupObj = null;
    synchronized (mutex)
    if( hasBeenDismissed ) { return; }
    // mark alert event as acknowledged (simply reset ack req flag)
    ae_AlertEventInfo info;
    Iterator i = theAlerts.values().iterator();
    while (i.hasNext())
    info = (ae_AlertEventInfo) i.next();
    if (info.sequenceId == seqId)
    // even if ack wasn't required, doesn't hurt to set it
    // to false again. But it is important to prevent the
    // audible from playing again.
    info.ackRequiredFlag = false;
    info.alreadyPlayed = true;
    // internally uses the vector index so
    // process the queue acknowledge update within
    // the synchronize block.
    final ae_AlertEventInfo myAlertEventInfo = event.getAlertInfo();
    SwingUtilities.invokeLater(new Runnable()
    public void run()
    myQueue.acknowledge(myAlertEventInfo);
    myQueue.updateAcknowledgeButtonState();
    // here we should stop playing sound
    // if it is playing for this alert.
    int seqId1;
    if (theTonePlayer != null)
    seqId1 = theTonePlayer.getSequenceId();
    if (seqId1 == seqId)
    if (! theTonePlayer.isStopped())
    theTonePlayer.stopPlaying();
    theTonePlayer = null;
    // get reference to popup to be dismissed...
    // The dismiss must take place outside of
    // the mutex... otherwise threads potentially
    // hang (user hits "ok" and is waiting for the
    // mutex which is currently held by processing
    // for a "move to summary" transition message.
    // if the "dismiss" call in the transition
    // message were done within the mutex, it might
    // hang on the dispose method because the popup
    // is waiting for the mutex...
    // So call popup.dismiss() outside the mutex
    // in all cases.
    if(event.getSource() instanceof AlertEventPopup)
    popupObj = (AlertEventPopup)event.getSource();
    else
    popupObj = thePopups.get(event.getAlertInfo());
    thePopups.remove(event.getAlertInfo());
    SwingUtilities.invokeLater(new Runnable()
    public void run()
    // search vector elements to determine icon color in main frame
    String color = getColor();
    fireUpdateEvent(new UpdateEvent(this, blinking, color));
    // Call dismiss outside of the mutex.
    if (popupObj !=null)
    if(popupObj instanceof AlertEventPopup)
    ((AlertEventPopup)popupObj).setModal(false);
    ((AlertEventPopup)popupObj).setVisible(false); // xyzzy
    ((AlertEventPopup)popupObj).dismiss();
    else
    // update feedback... ack failed
    SwingUtilities.invokeLater(new Runnable()
    public void run()
    myQueue.setInformationMessage("Acknowledge failed to reach server... try again");
    return;
    Code for RowHeaderRenderer is:
    class RowHeaderRenderer extends JLabel implements ListCellRenderer
    JTable theTable = null;
    ImageIcon image = null;
    RowHeaderRenderer(JTable table)
    image = new ImageIcon(AlertEventQueue.class.getResource("images" + "/" + "alert.gif"));
    theTable = table;
    JTableHeader header = table.getTableHeader();
    setOpaque(true);
    setHorizontalAlignment(LEFT);
    setForeground(header.getForeground());
    setBackground(header.getBackground());
    setFont(header.getFont());
    public Component getListCellRendererComponent( JList list, Object value,
    int index, boolean isSelected, boolean cellHasFocus)
    int level = 0;
    try
    level = Integer.parseInt(value.toString());
    catch(Exception e)
    level = 0;
    if (((ae_AlertEventInfo)theAlerts.values().toArray()[index]).ackRequiredFlag)
    setBorder(UIManager.getBorder("TableHeader.cellBorder"));
    this.setHorizontalAlignment(JLabel.CENTER);
    this.setVerticalAlignment(JLabel.CENTER);
    setIcon(image);
    else
    setBorder(BorderFactory.createLineBorder(Color.gray));
    setText("");
    setIcon(null);
    return this;
    I tried but when i am clicking a particular label, the color of all labels in the List is being changed. So can you please assist me in changing color of only the label that is selected and the color must disappear after completion of Upto completion of fireAcknowledgeEvent(ackEvent);

    im a bit confused with the post so hopefully this will help you, if not then let me know.
    I think the problem is that in your renderer your saying
    setBackground(header.getBackground());which is setting the backgound of the renderer rather than the selected item, please see an example below, I created a very simple program where it adds JLabels to a list and the renderer changes the colour of the selected item, please note the isSelected boolean.
    Object "value" is the currentObject its rendering, obviously you may need to test if its a JLabel before casting it but for this example I kept it simple.
    populating the list
    public void populateList(){
            DefaultListModel model = new DefaultListModel();
            for (int i=0;i<10;i++){
                JLabel newLabel = new JLabel(String.valueOf(i));
                newLabel.setOpaque(true);
                model.addElement(newLabel);           
            this.jListExample.setModel(model);
            this.jListExample.setCellRenderer(new RowHeaderRenderer());
        }the renderer
    class RowHeaderRenderer extends JLabel implements ListCellRenderer
        JTable theTable = null;
        public Component getListCellRendererComponent(JList list, Object value,
                                                      int index, boolean isSelected, boolean cellHasFocus){
            JLabel aLabel = (JLabel)value;
            if (isSelected){
                aLabel.setBackground(Color.RED);
            }else{
                aLabel.setBackground(Color.GRAY);
            return aLabel;       
    }

  • My Illustrator does not allow me to change colors using swatches panel. Help pleas.

    Few days ago I started having strange problems with my Illustrator CS5 application. I am using MacBook Pro with Intel Processor.  After major update on the Mac OS  few days ago  I noticed I can not change colors in my drawings using swatches panel. The function on my Illustrator CS5 stopped working.  When I select object and try to change its fill or stroke color using fill and stroke from the options bar above work space,  none of the swatches would work.  The are there how ever nothing hapends when I select them, the color remains the same.The same thing happens if I try to use the swatch panel, I select the object then I try to select new color from swatch but the fill or stroke does not change. I can only change color on my drawings using the color panel but that is not useful for me since I need to get precise colors using approved color swatches ether from pantone library or approved by client.
    The other strange thing is my selection tool does not deselect when I click outside on or of the artboard, the object remains selected until I reselect another object or use the keyboard short cut to deselect it.
    I have tried various options to resolve the issue from deleting and reseting preference to completely uninstalling and  reinstalling Illustrator CS5. I even installed back my old CS4 version because I had to complete a project  and the same issue is happens there as well. I also reset the application using Time Machine from few months ago when it was working correctly. What happens when I reset or reinstall the app, it works for  about 10 min correctly as it should and and then it reverts to the same problem. I am out of options and do not know what else I could  do to fix this. Right now I am working on my old Mac tower G5 and CS4 where everything works as it is suppose to, but I really need to get this fixed. Can any one help or has solution for my problem? Please.

    hey i m working on my illustrator and i m having many problems with my swatches
    for example i use the green phosphorique i don't get this color i get another green
    and many colors too it's like illustrator chooses for you the only green color
    so please i kind of need help i can show you pictures of that i print screen viewed them.. so anybody who can help... pleaaaaaaaaaase contact me because i m having a project now..
    my e mail is [email protected] i would be thankful
    i even tried to download the illustrator on my friend's computer also i m having this problem ....

  • PS CS6: stroke color picker preview in real time not working

    re: NEW color picker stroke color not updating in real time (previewing).
    Is it me or has the stroke color preview been removed in CS6 or is there a setting that needs to be changed to enable it?
    The problem: When I create a shape layer, press enter and then chose a stroke color from the color picker, I select a color but it doesnt update the stroke color until I press enter. I'm sure it used to change in real time as you clicked on the color picker panel before accepting it.
    Any sugestions or ideas as to whats going on or am I going mad?
    Further update: This is when creating a shape but using the new stroke feature in the properties bar at the top (the one which gives you the new fancy options like having a dashed, transparent or gradiented stroke) and not the traditional method of adding it as an effect. This still shows a real time update, but the new method doesnt.

    Curt Y wrote:
    zarrdave wrote:
    You're then moving the colour picker dialogue box to one side so you can see he shape created, and you've then tried clicking on different colours and the border color has changed after each click (but before you press OK)?
    If thats working so the color changes in real time for you, then unfortunatley I've got a problem with my version.
    Using Win7 CS6 extended, and following your instructions it works for me.
    Border changes withn I click on color pallet with color picker.
    Odd, same version/ O.S. here, thanks for that though Curt Y. Are you sure you're not clicking on the preset colours and actually using the color picker dialogue box.
    I've been in a bit of a rush here at the office and appologise for not being clearer and posting a screencap earlier.
    To clarify, its the Cyan dialogue box not the orange box I'm talking about  (nice choice of colours I know ). The top right icon in the organge box with the colours in is how you get to it.

  • How To Make Shapes Change Colors When Clicking on them. Example Sheet Sales Data.xlsx template with Excel 2013

    My question is related to the Sales Data.xlsx template that comes with Excel 2013
    IN this workbook is a sheet named Sales Data. It has, 3 shapes. One each for each of the tab sheets in the workbook. When I click on the 'Sales Report' shape it selects the sales report tab. When you do this the shape changes color and the 'Sales Data' shape
    also changes color.
    However I'm unable to figure out how the colors are changing. 
    I don't see any macros in the workbook/worksheet. Nor do I see any code for worksheet events. I don't see any modules in VBA either. I think what is happening is that there are 2 shapes. When you click on one, the one shape goes to the background and the
    other one comes to the foreground.
    I'm no sure how it's doing that. 
    Can someone look at this template, Sales Data.xlsx that comes with Excel and explain how this functionality works?
    Thank You
    Keith Aul
    Keith Aul

    The shapes are exactly as I suspected, each of 3 sheets has 3 'navigation' shapes. The shape with the same name as the sheet has no hyperlink and is coloured differently to indicate it refers to the active sheet. The other two have hyperlinks linked to respective
    sheets. 3x3 shapes, 9 in total, none of them ever change colour!
    It's logical though not necessary to name each shape same as the sheet it links to, but they'd work just as well with their original default names.
    For aesthetics, the shapes that refer to own sheet have a horizontal line on top, actually two shapes as a group.
    If still confused copy each set of 3 shapes to a 4th sheet, or open two new windows so you can see all three sheets at the same time.

  • Q10 - I tap the screen to select, the icon changes color (indicating selection) but nothing happens...

    I notice an issue that predominantly happens when I use my thumbs to tap but does happen with fingers from time to time. 
    When I select an icon (say, for instance the lower-right corner icon to jump into camera settings), the icon changes color slightly when my thumb touches the glass, and then when I remove my thumb, nothing happens. 
    Sometimes this happens more than 5 times in a row.  It's one thing if the screen never recognized my finger/thumb in the first place.  It is a bit more madening when I KNOW that there was recognition (icon changing color) and yet nothing happens.. 
    Anyone else having this problem?  Is there some way to recalibrate the screen? 
    Right after I posted this message I tried that camera setting button - 7 tries before anything happened with my right thumb, one try with right index finger, then again it took 5 tries with index finger.  The frustrating thing is that the icon to load the camera in the first place (lower right corner)... that one almost always works with the first tap... 

    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • Can I change color of all objects at ones ?

    Hello guys
    I understand that's very fundamental question, and I promise I search the forum prior to posting, but perhaps it's my bad english and wrong phrasing, that leads to poor results. So if that has been discuss, please kindly don't waste your time, just link me to the post and I will read away.
    I have very complex file, with hundreds of paths, shapes, text, outlined text,  etc... It's a brochure with graphs, scematich drawings and text.
    Last moment, the client like the reverse the colors from (current) Black on white, to all White on dark gray background.
    Problem is, I can't seem to find easy way to just change the colors, without selecting one by one, every single object. When I selest all and choose white, it start filling paths with solid fill... Editing it wastes allot of my time and I have many pages to do.
    Is there any way to simple change color of everything at once, just from black to white ? Or do I have to go object by object manually ?
    Thank you very much, for all the help so far, and I'm sincerly sorry to waste your time if that has been covered previously.
    Good day
    ciao ciao
    Monika

    Thank you both for such prompt follow up. I know it's just typing and it's easy but I sincerly mean it. Thank you.
    The INVERT work on some images.
    The "SAME" seem to work funny way. When I select STROKE COLOR, it does nothing, but when I select WIGHT then it does and in fact I'm able to change lots of strokes at once with ease. Even tho I'm left with few small bits here and there which I need to change manually, it is certainly far better than doing one by one.
    Thanks a lot for the help, it's what I was looking for.
    By the way   I not once used the SAME menu. Feel so lame, given I use AI (not daily but often) for few years now... Shame.
    Thank you and you guys have a great day
    xoxo

  • Why do eBay item listings no longer change colors after being viewed?

    Need some help with a problem – in the past, when I opened a specific listing on eBay, it changed color from blue to red when I got back out of the listing. As of late, they do not change and remain blue. As I do 20-30 music title searches daily, the color change was a real time saver as I could tell immediately when I had begun yesterday’s search as it was now red. Without the color change, I have to pay much more attention and invariably end up searching beyond that point until I realize it. Do you have any idea how I can get back to the color change? Any help would be much appreciated.
    Many thanks!

    I've seen more posts from people that also have this issue with visited links while using the Back button, so this behavior may be a regression and caused by using the cache more aggressively.
    Does opening the link in a new tab work to show the visited state of links?

Maybe you are looking for