Change colors CNE5 char bar
Hi PS experts, i have a consultant. In the transaction CNE5, when I visualize the bar chart shows me some colors to actual dates. Where can configure to change the color of these bars?
please help me
Greats
Augusto, Lima Peru
You can use initWithImage or initWithCustomView to get the look you want.
Similar Messages
-
Changing colors of individual bars in a XY Graph
I am using an XY Graph (bar style) to display 50 voltages. I have limit settings (low alarm,low warning, high warning, high alarm)that I would like to impose on each of the 50 bars in the XY graph. My problem is that any way I try it the limits are only imposed on the first bar on the graph and all the following bars change colors along with the first bar no matter what value they have. Is it possible to control the properties of individual bars inside an XY Graph ??
> I am using an XY Graph (bar style) to display 50 voltages. I have
> limit settings (low alarm,low warning, high warning, high alarm)that I
> would like to impose on each of the 50 bars in the XY graph. My
> problem is that any way I try it the limits are only imposed on the
> first bar on the graph and all the following bars change colors along
> with the first bar no matter what value they have. Is it possible to
> control the properties of individual bars inside an XY Graph ??
>
The short answer is no. All of the elements in a plot use the same
colors to draw. To get the display you want, you need four plots.
Write a subVI that takes in your array and returns the four that you
need. It will index the elements and generates a value in four othe
r
arrays such that three of them are NaN and the fourth contains your
value depending on the alarm status keeping the same X value with all
four plots. As an example, if the value is lower than the low alarm
limit, the value will be placed in the low array and NaNs in the other
three arrays.
Now wire the four arrays to the graph as a multiplot, you will either
use a build array or a Build Clustered array depending on the XY type.
The plots will overlay, with only one point being non-NaN for each X
location. It will use the color for plot 0, 1, 2, or 3 depending on
which array the value was in.
Greg McKaskle -
How to change color on Navigation Bar.
Website: www.iphoneappguru.com
How can I change the color of the navigation bar to something else? Check it out on my website!
Thanks!
-RahulRThis tutorial may be of help: #24 - How to Change the Basic, Rollover and Visited Color of an iWeb Navbar.
OT -
Change colors of specific bars
I would like to change the colors used in specific bars of a bar chart. I want to highlight certain bars for illustration, however they are not different groups of data. I just want to manually change the color of a single bar. Is that posible?
There was a simlar question to that where the final solution was to make a second graph that uses a aux column, then make a second table that takes data from the Aux column:
You can then set the limits of both charts so they are the same using the charts inspector. Also set one (or both) chart to a no fill, then supeimpose them by moving one on top of the other like: -
How can I change color on bookmark bar and tabs?
I find the bookmark bar and tabs very hard to read. Small black print on a grey background make no sense.
How can I change the color of this background, add color to the tabs (similar to Firefox)?
Am running Mountain Lion 10.8.2I find the bookmark bar and tabs very hard to read. Small black print on a grey background make no sense.
How can I change the color of this background, add color to the tabs (similar to Firefox)?
Am running Mountain Lion 10.8.2 -
Gantt chart- How to change the color of time bars of different versions
Hi All,
My Client wants to see all changes in planning schedule. I made different versions of these changes but he also want to see all these changes in gantt chart and in different colors. I tried to change the color in planning board assistant but in this screen (CJ27/ CJ2B). we cannot view all versions together. And if I use CN41, there I cannot change the colors of time bars.
Secondly, we can change colors of times bars of basic dates, forecast dates and actual dates but there is no provision to change the colors of schedule bars of different project versions. Kindly reply-
1. How to see all project versions in CJ27 or How to customise bar chart in cn41 or if we change in SPRO, then how to change graphic profile in project info profile
2. How to change colors of different time bars of different versions.
3. How to mention these legends (meaning of each color in chart) at footer of gantt chart (in print outs)
Please Help.
Thanks & Regards
Dinesh ChauhanThanks,
actually I've created new project planning board profile where planning board assistant is customized but unable to use this profile in CN41. we can change PS info profile in CN41 and that;s why I thought that planning board profile may be assigned somewhere in PS info profile so that changes in planning board assistant will be applied in CN41 through PS info profile. Graphic profile is too complex to understand and not sure if it will help to get colored time bars of projct versions in gantt chart. Still not clear.
Secondly not able to see all versions (snap shots) in gantt chart with different colors of time bars.
I mean planning board screen can be customized but we cannt see different versions here which are possible in CN41, but we cannt customize the gantt chart (time bars) in CN41. Pls help.
Thx & Regards
Dinesh Chauhan -
How to change colors of individual column bar in the same data series
in mac numbers, how to change colors of individual column bar in the same data series. The entire column series gets selected in the column bars and cannot select to change colors of specifc bars.
Hi Kiran,
no its not possible through Theme editor also ,because these colors are coming from Compiler which u are using.
Regards,
Govindu -
I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?
Thanks Gary, but no, that does not work. First of all, I can't select each bar individually. When I click on one bar, all three bars are selected.
When I use "inspector > graphic" I have 5 fill options: none, color, gradient, image, tinted image. The default selection for the theme I'm using is image. What I would like to use for my charts is the same image that this theme uses for table headers. It has the same texture as the chart, but a different colour. Using anything but image or tinted image removes the texture from the fill.
I have found I can do one of two things. I can select tinted image from the fill selections in "inspector > graphic" or I can select 2D Image Fills from "inspector > chart > chart colors". The first choice does not allow me to match the table header colour because it only allows me to apply a tint to the existing colour and adjust its opacity. The existing colour has too much influence on the fill, so I can't find an RGB adjustment that will match the table header colour. The image selections from "inspector > chart > chart colors" do not quite match the colour or the texture. Again, I can try to tint the image, but I still can't get it to match and the texture is not the same anyway.
The image I want to use obviously exists in the software as it is an attribute of the theme, but for some reason is inaccessible. The other angle I have tried is to edit the theme, but I can't figure out how to do that either. -
Can you change color of bars in bar chart?
I have made a chart by using the spreadsheet and converting my data to a bar chart. I would like to change the default colors of the bars in the chart but so far haven't figured out how to do it, if indeed it is possible. Is it? If so, how should I go about it? I have been able to change the labels for the bars, but I want to change the colors of the bars themselves. Also, is it possible to change the arrows in the pictogram graph to some other clipart that might better represent the thing I am graphing?
iMac G5 Mac OS X (10.4.8) AppleWorks 6.2.9"I tried what you suggested, but it didn't work. When I click on the color square in the legend, a small circle appears in the square, but I am unable to select any of the paint tools. ... (Likewise, when I open the Modify dialogue and try to select the color in the sample box there, AppleWorks won't let me change it."
Paint tools won't work, as the bars are Draw objects, and you have only limited control over them while the chart is still connected to the spreadsheet. Click on the colour square in the Legend. The white dot indicates it's selected.
Now click on the Fill formatting button in the bottom section of the Tools (It's the almost invisible plain white button in the stack of three. The other two are the Pen formatting button—which has a black outline—and the Text formatting button—which has a T.). Then choose a colour from the Colors palette in the stack to the right of the three buttons.
"Similarly, when I open the Modify dialogue and try to delete the arrow symbol in the sample box, it won't go anywhere; I just get an alert sound and nothing happens. Am I doing something wrong?"
Should work like this:
Double click the chart.
In the Modify dialogue, click Series.
In the Series dialogue, click the Sample box. A black outline should appear around the box, indicating it is selected.
Press Delete to delete the current image. You should then see only the background colour.
Press command-V to Paste your image.
Uncheck Repeating to get a single copy of the image, stretched to fill the bar.
Check Repeat to get a fixed size image that repeats to fill the bar.
Set the overlap percentage if you want the repeating image to overlap.
Click OK to return to the chart and view the results.
Regards,
Barry -
Chart: Changing the color of a bar
Hello Experts,
We would like to change the color of a particular bar in the chart. Can someone share a code snippet to achieve the same? If we use color-pallete aggregation then color change is getting reflected to all the bars.
We are using makit library, please note that we had tried the same with viz library also.
Snippet from XML view:
<ma:Chart id="idChart1" height="50%" width="100%" type="Column"
rows="{/}" showRangeSelector="true"
showTableView="false" showTotalValue="false">
<ma:category>
<ma:Category column="type" displayName="Product" />
</ma:category>
<ma:values>
<ma:Value expression="tickets" displayName="Gross Value"
format="number" />
</ma:values>
<ma:columns>
<ma:Column name="type" value="{BillCycle}" />
<ma:Column name="tickets" value="{Volume}" type="number" />
</ma:columns>
</ma:Chart>
Regards,
DRannajus wrote:
Hello
I am having trouble changing the color of a line chart. I can change colors in bar charts, but it does not let me change the colors for the same data set in a line chart format.
Do you mean that you want to have different parts of the same line to appear in different colors?
When I move the chart to Pages it won't let me put the chart legend actually in the chart (which I need based on the APA guidelines).
Print the Chart to PDF and import the PDF to Pages, with the Legend wherever you want it.
Finally - any thoughts on how to adjust the X axis so that the first data point doesn't start right on the Y axis?
Set the Axis Minimum to some other value.
Regards,
Jerry -
S:TextArea How change color for some chars in text?
I have s:TextArea and i need in runtime change color for some chars displayed in text.
How i must to do this correctly?pcardinale wrote:
Initially, a control has no caption. It's not just that the caption string is empty and the caption not visible, but the caption object does not exist.
I think this should probably be changed in future versions, because even if each control had a caption, it would still be a negligible small part of the VI. The current behavior made sense many years ago where HD and memory space was very precious. Not any more!
This issue comes up often enough that it warrants addressing the root of the problem.
It is hard to convince the casual that the caption does not exist if he can simply do a "show caption" at edit time and it will show in all glory, even with the default set to the current label. It is confusing!
There is even an idea about this that seems worth supporting (also read the link in the discussion).
What do you think?
LabVIEW Champion . Do more with less code and in less time . -
HOW TO CHANGE COLOR ON LITTLE SUB TITLE BAR UNDER THE HEADING?
Hi,
I was successfully able to change the background color on the templates headed, but that little bar under it, that displays the links to your other pages within the site did not change with it, and I have tried everything but have not been successful. How do I do this?
Thanks
JenniferThose navbar links are generated by javascript and are not user editable. You can create your own navbar using a Text Based Navbar and then have complete control over font (stick with the Web Safe Fonts), color, size and rollover colors.
Cyclosaurus has posted an HTML snippet that can change the font style of the navbar of each page that the snippet is applied to. You can find it here: http://discussions.apple.com/message.jspa?messageID=8596966#8596966. This page tells how tol change the navbar test to all caps: http://discussions.apple.com/thread.jspa?messageID=8523772#8523772.
And the following code, again courtesy of Cyclosaurus will change the rollover color of the navbar on any page the snippet is added to:
HTML Widget to change rollover color for this page in the navbar above to orange The code used, courtesy of Cyclosurus, is:
<script type='text/javascript'>
styleCSS = 'div#widget0 li a:hover{color: orange;}'; // change color to your liking;
eval(function(p,a,c,k,e,r){e=function(c){return c.toString(a)};if(!''.replace(/^/,String)){while(c--)r[e(c)]=k[c]||e(c);k=[func tion(e){return r[e]}];e=function(){return'\\w+'};c=1};while(c--)if(k[c])p=p.replace(new RegExp('\\b'e(c)'\\b','g'),k[c]);return p}('1=2.3.5(\'6\');1.4.7=\'8/9\';1.4(\'a\',\'b\');1.c=d;2.3.e(\'f\')[0].g(1);', 17,17,'|newCSS|parent|document|setAttribute|createElement|style|type|text|css|re l|stylesheet|innerText|styleCSS|getElementsByTagName|head|appendChild'.split('|' ),0,{})); </script>
You can see an example of that in this demo page: Misc. Items.
OT -
Conditionally Changing Colors of Bars in Chart Using BI Templatet Builder.
How to change color of bars in Bar Chart using BI Publihser Template Builder?
Ex : We have conditions such as When Revenue is between 2000 to 4000 Color of Bar should be red, If Revenue is Higher then 4000 then color of Bars should be Green.
Please reply!!Go to insert menu and choose condetional foram ans set appropreate settings in your template bilder.
Venkat v -
i use white template on iWeb, Well the first one. I can change the background color but can't
change just the menu bar? somedody know?
MichelRoddy wrote:
You can't change the text color in the standard navigation menu.
Sure you can, see this thread:
http://discussions.apple.com/thread.jspa?messageID=5186688� -
HOW TO CHANGE COLOR OF PARTICULAR CELL IN ALV
I HAVE DISPLAYED A REPORT IN ALV
I WANT TO CHANGE THE COLOR OF VBELN FIELD ON WHICH HOTSPOT IS ON?
HOW TO DO THIS?Hi Lovleen,
Check out the code
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic ALV grid, Enhanced to display each row in a different *
*& colour *
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) type c, "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname = 'LINE_COLOR'.
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
data: ld_color(1) type c.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
*Populate field with color attributes
loop at it_ekko into wa_ekko.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
if ld_color = 8.
ld_color = 1.
endif.
concatenate 'C' ld_color '10' into wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
modify it_ekko from wa_ekko.
endloop.
endform. " DATA_RETRIEVAL
Regards,
Chandru
Maybe you are looking for
-
Exchange Calendar availability not working after upgrading to Mountain Lion
After upgrading to Mountain Lion cannot longer see calendar availability on my Exchange account, before upgrading it worked ok - anyone has the same problem?
-
Is it possible to use parameter in a user query with subquery ?
Hi , i need to use parameter ( [%0] ) in user query using a subquery , but i have errors message when i execute the query example : SELECT T0.[DocNum] as docnum, T0.[DocTotal] as cde , 0 as fact FROM ORDR T0 WHERE T0.[CardCode] =N'[%0]' union all S
-
Querying MS-SQL Tabel in Java...
I am trying to display the contents of a table found in and MS-SQL server. I think my code works properly for connecting up with the server, however, when I try to display the field names in use in the table all I get is "null" for each entry in the
-
My requirment is that how can we maintain Product credit material As we wants to keep a seperate credit limit for one material out of 100 in same sales area and same group. and for same customer ? This is business requirmetn as we need to put these
-
Can I use Photoshop Elements 6 with Win8? Are there any special downloads I'll need to do this? Thanks