Change COMIM-NOAUS (BQPIM-NOAUS) No box listing sources of supply

Hi experts!
I am using the exit EXIT_SAPLMEQR_001 / ZXM06U52 where I change the vendor and the inforecord by automatic source allocation using tcode ME56. Any way, the system display the purchasing source list because the field COMIM-NOAUS is initial.
Does anyone knows how could I change this field (COMIM-NOAUS - No box listing sources of supply).
I am working on SAP ECC 6.0, Retail.
Thanks allot.

Similar Messages

SRM 7.0 duplicated supplier in vendor list source of supply

Hi Expert! I need your help about a srm vendor list issue.
A customer of mine uses srm vendor list to group suppliers in order the services or goods their offer.
It has been implemented an automatic process to insert the supplier in the specific vendor list. The process, before insert the supplier check if the one is not already present.
For about one years all was working fine.
Now we get duplicate rows on some vendor lists, I mean same row number, same supplier and so on.
Attached to this document a system screenshoot.
Is there any one able to give me a way to delete these duplicated rows?
Thanks

Daniele,
it could be due to multiple purchasing org. assignment to the suppliers.
Regards
Konstantin

Programmatically Change Combo Box List

Hello,
I searched heavily on these forums and found answers that were close, but I cannot quite figure out the following:
I have a large number of individual RF assemblies, most having the same test requirements. My plan is to create a combo box (or similiar) from which the assembly number can be selected. This box will then provide a numeric value to a case structure, which will then provide the need test parameters and what not.
I know the combo box list can be populated with a property node and the property node fed by an array. It is my hope to be able to put this info in a spreadsheet file that can be updated as necessary and then imported into the VI at run time. Therein lies my problem.
Using the strings and value[ ] property, I can make the combo box work correctly, but I cannot figure out how to import the spreadsheet into the proper format to feed the property node. I've tried various spreadsheet import schemes offered on these forums, but none quite hit it. I've tried to figure it out on my own, but I'm just spinning my wheels.
Any help would be appreciated.
Thanks.
Attachments:
PullDown_Module.vi ‏30 KB

Hello,
I've attached a VI that I think will help you. I actually used the Index & Bundle Cluster Array function, which I don't think I've ever used before. Anyway, this function gets the two arrays of strings from my tab-delimited text file and manipulates them into an array of clusters containing two strings each, which is the data type required by the StringsAndValues[] property of the Combo Box:
I hope this gets you started in the right direction. Good luck!
-D
Message Edited by Darren on 03-17-200602:18 PM
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
Combo_Box_Screenshot.jpg ‏100 KB
Combo_Box.vi ‏27 KB
data.txt ‏1 KB

Changing the size of a drop down list

Hi Everyone,
Is there anyway to change the size of a drop down list? For example, our customer would like to make the drop down list for the Ship-To field on the logistics tab of the sales orders longer. Currently, they cannot see the full name when they scroll through it. Is this possible? Depending on what Customer Code they enter, the field size appears to change.
Thank you in advance for your help.
Amanda

I am using Tahoma size 10 as well.
Is the drop down size somehow related to the size of the first few records? So, if those are shorter than those at the end, perhaps it doesn't adjust for the size of the bottom records. For example, in our customer's database here's a sampling of what they have entered and the order:
Wal-Mart 6124
Wal-Mart 6125
Wal-Mart 6126
Wal-Mart 7001
Wal-Mart Supercenter 1111
Wal-Mart Supercenter 2094
Wal-Mart Supercenter 3475
The drop down box is large enough to see the Wal-Mart 6124, etc. but not large enough to see the Wal-Mart Supercenter ones at the bottom of the list (keep in mind there are over 100 ship-to's for this Business Parnter). Does it maybe only look at the first fifty records or something like that?
Thanks again,
Amanda

When I change size of icons or icon vs list display, why does it affect the whole computer?

When I change size of icons, or icon vs list display, why does it affect the whole computer? In some folders I want to see a list and others I want to see an icon and I don't need a large icon in all folders. I used to be able to set each folder separately in the old OS. How do I fix this?

I can hilight an item, go to the finder/file/getinfo but there is no box next to icon view.
I can go to view/options and adjust the icon size etc, but this applies to every folder in the whole computer. I need varied options in different folders, i.e., I want to view images as icons and text as text. I have to change it every time I open a folder. I used to be able to set it per folder in the old OS.

Combo box list update or insert restriction

Dear all,
I have a list item which type is combo box.
it shows the Departments list from the department table at run time.
i populate at through a procedure at runtime.
problem
the user could update the list by writing something into it.
i want to force the user to just select a value from the list, not update or insert.
i change the properties of the list item which prevent insertion or updation,
but it disable the selection from the list as well.
how to prevent the user to write something in the combo box list while giving him the
selection authority using the combo box list item?
Thanks and Regards

thank you dear,
but i want to use the combo box instead.
for popup list there is a problem of the null value,
you must assign a value to the popup list and set its required property to true for doing so.
and the combo box do not need this. and my desired functionality require it.
Edited by: Muhammad on Feb 28, 2010 3:10 AM
Edited by: Muhammad on Feb 28, 2010 3:21 AM

I am trying to change the name in my "from" box

I am trying to change the name in my "from" box. My name has changed and although I have changed the name on the account, I can't figure out how to make the default name in my "from" box change from my previous name to my new name.

You may need to know that (in Snow Leopard at least) you specify multiple possible "From" email addresses as a list separated by commas. Just type them into that little Email Address box*: they'll move over to make room. Then, on your new messages from that point on, a pop-up menu will appear for the From field. Neat, eh?
*-- Notice that you can lie in this box. Your ISP might not let you get away with it, but spammers use this loophole.
--Gil

How do you change the colour of the "colour boxes" in themes?

Creating a book in Aperture the various "Themes" offer you different layouts. When you are in a Theme - is there a way to change the colours of the background boxes (Not page colour) - I have searched everywhere to see how to do this and a simple thing like this seems like it is not possible. Yes you could make a photo of the correct colour you want and drag it in but surely there is a simple way of changing the colour of these theme boxes.
The theme I am using is Special Occasion and I want to darken the lightblue boxes behind the text.
Would appreciate anyone out there who could advise on this please, thank you in advance.
Richard
Apperture 3.4.3
iMac 21.5 OS 10.7.5
iMac 27 OS 10.6.8 (the best)

Richard,
there is no built-in option to change the color boxes. You can only change them by patching the Resorces in the Aperture application bundle, and that is risky.
The color of the background boxes is set in the property list (for the Extra Large Book):
/Applications/Aperture.app/Contents/Resources/Book Themes/Special Occasion/ExtraLarge/Graphics/BlueRect.plist
The current value is:
backgroundColor {224, 241, 238, 100}
To try what happens, when this value is changed, I edited it to {100, 200, 255, 100}
You will not really want to patch your Aperture application bundle
What you might try, would be to copy the "Special Occasion" subfolder of the Book Themes and to create your own custom theme from this and install it in your user library
~/Library/Application Support/Aperture/Book Themes/
-- Léonie

Dynamically change the contents of one combo box based on the other

Hi Forum,
I have a question which might have a possibly simple answer. Well anyway help me out since i could not find the simple answer.
I am building an application using Swing and binding with BC4J using JClient. My GUI has combo boxes, grids, editboxes. My requirement is that i should be able to dynamically change the contents of one combo box based on the selected item in trhe previous combo box. For example, when i choose a country in the "country combo box", the "states combo box" should show the list of the states of the selected country.
Now how do i do this using binding. If not, how do i write custom querirs in BC4J layer and return a resultset to the remote application so theat i can populate the dependent combo boxes.
I will appreciate if anyone can help me out in this regard.
Thank You
Sumit

there could be quite a few number of ways of solving this problem.
One way is through event handlers.
taking your example as a model when user selects a country you could fire an action with a flag set to ture. A method will return the states from the DB or your temporary files or what ever and then the true flag will be used in the states combo box rendering.
other way: javascript
this might be a bit clumsy as you will need the states information in a property file and you can get the info as the user selects a country.
regards,
raj

How to change the standard layout sets in ALV List

Hi Gurus,
How to change the standard layout sets in ALV list.
Is there any standard program ? or specific way to acheive this?
Kindly drop some clues?Every valuable clues rewarded more points........
Thanks in Advance,
Dharani

Hello Dharani
All required function modules can be found in function group SLVC (assuming that you are using OO-based ALV or, at least, fm REUSE_ALV_GRID_DISPLAY_LVC):
LVC_VARIANT_DEFAULT_GET (Read default display variant (description only, w/o field catalog))
LVC_VARIANT_EXISTENCE_CHECK
LVC_VARIANT_F4 (Display variant selection dialog box)
LVC_VARIANT_SELECT (Read a display variant)
For a sample report using LVC_VARIANT_DEFAULT_GET have a look at BCALV_GRID_10.
Regards,
Uwe

Change the color of selecteditem in a LIST FLEX

i WANT TO CHANGE THE COLOR OF SELECTEDITEM IN A LIST. WHEN EVER USER DOUBLE CLICK THE ITEM IT SHOULD CHANGE THE COLOR...
THIS IS MY LIST WITH DOUBLE CLICK EVENT...PLEASE HELP.....THIS SEEMED SO SIMPLE BUT I ALREADY SPENT FEW HOURS..
HELP WILL BE APPRECIATED. THANKS
<s:List id="shopslist1" left="0" right="0" top="57" bottom="0"
            initialize="shopslist1.dataProvider=actions" labelField="details" color="Red"   doubleClick="shopslist1_doubleClickHandler(event)">
    </s:List>
protected function shopslist1_doubleClickHandler(event:MouseEvent):void
                shopslist1.selectedItem. ?????????

Hello,
Please see following code:
<?xml version="1.0" encoding="utf-8"?>

<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
   xmlns:s="library://ns.adobe.com/flex/spark"
   xmlns:mx="library://ns.adobe.com/flex/mx">
<s:layout>
<s:VerticalLayout/>
</s:layout>
<fx:Script>
<![CDATA[
protected function myList_doubleClickHandler(event:MouseEvent):void
myList.setStyle("selectionColor" ,"#CC6600");
]]>
</fx:Script>
<s:List id="myList"
alternatingItemColors="[#66FFFF, #33CCCC]"
    doubleClick="myList_doubleClickHandler(event)">
<s:dataProvider>
<mx:ArrayCollection>
<fx:String>Flex</fx:String>
<fx:String>Flash Builder</fx:String>
<fx:String>Flash</fx:String>
<fx:String>Director</fx:String>
<fx:String>Dreamweaver</fx:String>
<fx:String>ColdFusion</fx:String>
</mx:ArrayCollection>
</s:dataProvider>
</s:List>
</s:Application>
Thanks and Regards,
Vibhuti Gosavi | [email protected] | www.infocepts.com

How to change To address in Lion Mail message list pane

I quite like the new Lion Mail app although I return to "Classic Layout" whenever I need to sort and clean up my inbox, but for general use the two-column layout with the message list on the left and the selected message content on the right works nicely for me. I would however like very much to change the "To" line in the message list. Currently my list of received messages shows "To" on the first line to the right of a picture of the "To" person. On the far right of this line is the time or date of receipt in blue. Under this first line is a little icon with "To" or "Cc" - sometimes, and that is followed by the subject. On the right of this second line is the mailbox and account. I have set preview to no lines to keep the list as compact as possible.
What I would dearly like to change is the To address in the first line. I know who the To is - it's Me! Occasionally the To shows another name if that person precedes my name in the list of recipients. What would be VERY useful is if this data showed the From address!
In the Classic View I can move the email columns around, adding new columns and removing them. Either way, in my inbox I can have the From address right in front of me. Is there any way of changing the To address to the Originator address - the From address - in the message list in Lion mail?
Thanks - Lawrence

Thanks, but that controls the header detail shown for the message in the right pane. So if I select a message in the message list on the left pane, the method you describe controls what header detail I see in the right pane when the selected message is displayed. The piece of data I really want to change is the first line of the message information contained in the message list in the left pane. It currently shows the To address in this window, which is useless to me; the From address on that first line - next to a picture from my address book of whoever is sending the message - would be infinitely more useful.
Lawrence

How do I change text size in a check box in CS3

How do I change text size in a check box in CS3?

While I've never done it myself for a checkbox, components
have a textField property which is essentially the texfield inside
the component. You probably need to apply a TextFormat to it to
change the size.
But if this involves the same problem you had yesterday,
where you couldn't change the width of the checkbox, I doubt you'll
have much luck changing the text size

I have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd space bar. How do I change it back to the original way of zooming?

i have always been able to zoom in on my photo by holding the cmd and space bar, that changed and now it creates a box and zooms in on that area and I can't zoom out using cmd space bar. How do I change it back to the original way of zooming?

Select the Zoom Tool in the tool box and see if Scrubby Zoom is unchecked or greyed out in the tool options bar.
(you want Scrubby Zoom checked)

Acrobat 9.1 Mac How do you change from Radio buttons to Check boxes?

I have a DMV Form I Downloaded and had to convert to PS then back to PDF (written originally on PC Acrobat was in XML format).
So on new form, I am able to add fields. I used the the Forms manager to automatically create the fields. Fields that were made Radio Buttons should have been Check boxes. How do change the Radio buttons to check boxes. There are a lot of them and I don't wish to have to re-key them in.
Suggestions?

Well when I click on the box it shows a Check mark in the box. That exactly what I need because in the instructions it requires a Check mark in each of the check boxes. Normally the Med form is sent as a paper copy from DMV every two years.
Also another Tip. A PDF that has XML Content. (PC Acrobat Version).
If you want a usable PDF on Mac and get rid of the XML do the following:
Open the XML Based PDF on Mac Acrobat 9.X .
Now choose export and save as Postscript File (.ps).
Now locate and drop on Distiller 9.X.
When PDF created will be a Pristine exact replica of the XML file except Mac Acrobat can edit and create forms with it.

Change COMIM-NOAUS (BQPIM-NOAUS) No box listing sources of supply

Similar Messages

Maybe you are looking for