Change complete configuration - a wish for Logic

In Logic 7, we used to be able to copy and paste an entire audio configuration (eg all plugins and settings in the mixer). This would commonly be done when an old song used an Audiowerk card for example and you now want to use RME hardware with Core Audio.
I know it's possible to select and save every channel as a strip, then change hardware and load each
strip . . . very time-consuming.
I also know it's possible to load an old song in Logic 7.x, do the conversion and then load up again in Logic 8 . . . also a time-waster.
I do know that since Logic Pro v8.0.1 there is an Environment menu item [Copy audio configuration] and a similar paste item. This does NOT work with older configs using "legacy" hardware.
I'm posting here to see if anyone else misses this function which was dropped in Logic 8.x
I will also post this at Apple's Logic feature request area and suggest anyone who agrees will do the same.
Regards - Colin

No-one else interested in this?
Brand-new Logic 8 users may not care about songs from older versions, but any long-time Pro user like myself should certainly be aware that loading older songs can be a real time-waster. You have to quit Logic 8, open Logic 7, open the old song, update the audio configuration, re-save the song, quit Logic 7, re-open Logic 8. (((Phew)))
Please support my initiative to get this feature back...

Similar Messages

Change Management Configuration for SolMan 4.0 SP13

Hi SolMan Experts,
Recently, we have build SolMan4.0. As of now, we have configured this for System monitoring and EWA reports.
Now, we are planning to configure for Change Management.
Could you please provide me the useful documents for CHANGE MANAGEMENT configuration on SolMan4.0.
Thanks in advance!
Regards,
Hari.

Hello
Follow the same steps which mentioned for SP12, as per my understanding there is not much difference in basic configuration of solution manager 4.0.
Create systems in SMSY, RFC connections, create logical system, create project, activate charm, these are the basic steps.
You will get information on this on saphelp and also go through the solman rkt (service.sap.com/rkt),
sap market place  sap support infrastructure  solution manager  media library (u will find all documents)
Even they gave given the charm configuration guide for SP12, u will find that in technical papers.
Hope this will help
Regards,
Sharmishtha

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Where is the complete configuration for catos4000 switch?

thank you!

Hi Friend,
Here is the complete configuration guide for catos 4k switch
For release 7.x
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/rel7_1/config/index.htm
Complete details about 4k switch with command reference
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/rel7_1/index.htm
HTH
Ankur

Resume hook for changed display configuration

Hi arch forum,
I need some help configuring my resume process. First the scenario:
I'm working with my notebook (ThinkPad T420s) on the train
and when I get off the train I close the lid and the notebook suspends. When I get to work
I drop the notebook into the docking station, where an external monitor is connected.
If I hit the power button on the docking station the notebook resumes without opening the lid,
but it does not check for changed display configuration. I have to open the lid and type my password to
get the new configuration started.
Question is: Is it possible to create a resume hook, so that X checks for the changed setup on resume before I opened the lid?
If someone could direct me to the right place in the wiki that would be great.
Now I should specify my configuration:
Gnome3 and proprietary nvidia drivers
Its a new installation so I have a systemd only setup (which takes care of suspend/resume so far)
If you need to know more, just ask.
Thanks for any help in advance,
arnold

Hi,
I'm trying to buy the exact same configuration.
although i cannot find this 2429CTT on lenovo site anywhere, is available for selling on a known european supplier.
and my propose is to have 2 Monitors connected, so I'll follow this inquire very closely and hold my order until then.
do you have any update on it?
just by curiosity, what about the rest? how does the PC feels to you? everything else is working?
thanks

Which is the optimal hard drive configuration for Logic Pro ?

hello people
i would like to ask your advices about possible hard drive configurations for Logic Pro
I have a Mac Pro and thinking to buy 4 x 500GB drives .
there are several combinations in my mind to configure , but first of all i would like to ask which is the best for an optimal system for Logic Pro
model 1 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 stripe Raid 0 array drive for ''recording + sound banks'' (500 + 500 = 1000)
which means to using 4 hard drives as 2 drives
model 2 :
1 stripe Raid 0 array drive for ''System'' (500+500 = 1000)
1 Single drive for Sound banks (500)
1 Single drive for Recording (500)
which means to using 4 hard drives as 3 drives
Or , it is more healthy to use the drives as single , without raid , stripe sets but with its own capacity instead of combining .
and also if someone has an idea regarding to compare of Seagate and Westerndigital drives (which is the best for audio recording) , would be really helpfull
I am kinda rookie for these subjects :/
thanks in advance

heelo blayzay
thanks for the reply and assistance.
1) how can i create a back up set for the 4th HD to be make back up of the 2nd and 3rd HD
2) what about to make 1st HD for system and 2nd3rd4th (1.5TB) for audio recording, and an external drive for backups ?
For the back ups , is there a special process for the backing up HD (internal or external) ? Or should i just need a Clone software to make the back up
thank you again.

Logging for changing device configuration using cisco prime LMS / PI

Dear All,
How to see / set for
for changing device configuration (routers, switches) using cisco prime LMS / PI ?
and, how to see network topology diagram using PI / LMS?
Thanks,
Jerri

anyone can help. thanks.

Step by step complete configuration document for SAP PM module

Can any body send me step by step complete configuration document for SAP PM module. If possible screen shots also. I will be highly obliged.
Indranil Chatterjee
Thanks in Advance.

Indranil,
It is not permitted for forum members to send documents to one another.
It is also expected that members will first perform their own research before asking for help. Did you search through SAP Help?
http://help.sap.com/saphelp_erp60_sp/helpdata/en/b2/4df35d51b811d192fb0000e829fbc6/frameset.htm
Best practices?
http://help.sap.com/bp_bl604/BL_IN/html/Content_Library_BL_EN_IN.htm
Best Regards,
DB49

What's the perfect new-MBP configuration for Logic?

I hope this isn't a troll. I've been waiting, waiting WAITING for the "refresh" of the MacBook Pro (MBP) to come out so I can solve a few performance problems (including my use of Logic which really requires it to be on one of those laptop fan-stands to keep it cool). The good news? The "refresh" is out. The bad news, there is a huge choice -- old-style MBP or retina-display MBP?
I think I've concluded that "old style" is the way to go -- I like to repair/upgrade my machines too much to give that option up. So now I'm working on what to put in it. Hence this post. Given your experiences, what would you stick in the "perfect" old-style MBP if you were in my shoes? Here's what I'm leaning towards.
-- Max out the non-upgradeable stuff when I buy the machine -- so...
   -- 2.7 GHz processor
   -- Hi-Res Anti-glare screen
-- Minimize the "upgradeable" bits (since I'm going to replace them with aftermarket stuff)
   -- 750GB 5400 rpm disk drive
   -- Minimum memory
-- Aftermarket upgrades
   -- Memory
   -- Disk drive
   -- Replace optical drive with a flash drive
Questions:
1) Memory upgrade -- any recommendations on memory that runs cooler than other types? My current setup started running a bit hotter when I swapped in aftermarket memory. I'd cheerfully buy Apple memory to avoid this problem, but maybe there's an aftermarket flavor that is equally good?
2) Disk drive -- same thing, although I'm not cheerful about buying the Apple versions unless I absolutely have to. Throughput is key, right? Anything else I should be keeping an eye on? Again, heat is something I'm trying to avoid.
3) Optical drive -- I am massively confused on this one. I understand the benefits to throughput (and perhaps heat). But which things should go where? OS and other "static" stuff (like application programs) on the flash drive (to avoid the finite-writes problem)? So put Logic Pro and the sound files on the flash drive (I'm thinking that's what I'm going to do)? Put project files there too? Recommendations on brands? Recommendations on optical-drive replacement kits?
4) Anything else that *you're* doing to build your 2012 MBP for Logic?
Sorry if this is a troll -- I tried to find this post on the list. If there is one, just link me into the thread. Thanks!

The RME I use is so intuitive it knows knows my moods and often refuses to record as it knows I'm going to $uck so why bother.
It also decides on which takes to keep.
pancenter-
p.s. MOTU stuff is solid and straightforward.

Hard Drive Configuration for Logic Studio 9

Based on a lot of prior feedback on this forum, we plan to utilize three separate hard drives on a Mac Pro for Logic 9 -- The System Drive, plus a separate work drive to store and work on the audio/MIDI files, and another hard drive dedicated to sound libraries. My question is, when we go about loading the sound libraries and their engines, do we load them onto the system drive (where Logic will live) and then just copy the actual sample/loop folders to the other hard drive? Or perhaps we should load the entire library and all its files onto the dedicated sound library drive?
As an example, when loading EWQL Symphonic Gold, do we load the PLAY engine onto the system drive and then load the Symph Gold Library onto the dedicated hard drive? Same question for ToonTracks, Superior Drummer 2.0 (VSSD Box) and Big Fish Audio Mojo and First Call Horns which I both believe will run with the newest Kontakt 4.0 engine.
We want to access these various libraries from inside Logic 9. How do we install the engines versus the actual sounds?

heelo blayzay
thanks for the reply and assistance.
1) how can i create a back up set for the 4th HD to be make back up of the 2nd and 3rd HD
2) what about to make 1st HD for system and 2nd3rd4th (1.5TB) for audio recording, and an external drive for backups ?
For the back ups , is there a special process for the backing up HD (internal or external) ? Or should i just need a Clone software to make the back up
thank you again.

Unable to retrieve nametab info for logic table BSEG during Database Export

Hi,
Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
more SAPCLUST.log
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
/sapmnt/BIA/exe/R3load: job completed
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
(EXP) TABLE: "AABLG"
(EXP) TABLE: "CDCLS"
(EXP) TABLE: "CLU4"
(EXP) TABLE: "CLUTAB"
(EXP) TABLE: "CVEP1"
(EXP) TABLE: "CVEP2"
(EXP) TABLE: "CVER1"
(EXP) TABLE: "CVER2"
(EXP) TABLE: "CVER3"
(EXP) TABLE: "CVER4"
(EXP) TABLE: "CVER5"
(EXP) TABLE: "DOKCL"
(EXP) TABLE: "DSYO1"
(EXP) TABLE: "DSYO2"
(EXP) TABLE: "DSYO3"
(EXP) TABLE: "EDI30C"
(EXP) TABLE: "EDI40"
(EXP) TABLE: "EDIDOC"
(EXP) TABLE: "EPIDXB"
(EXP) TABLE: "EPIDXC"
(EXP) TABLE: "GLS2CLUS"
(EXP) TABLE: "IMPREDOC"
(EXP) TABLE: "KOCLU"
(EXP) TABLE: "PCDCLS"
(EXP) TABLE: "REGUC"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
/sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
og (97%)
The main eror is "unable to retrieve nametab info for logic table BSEG "
Your reply to this issue is highly appreciated
Thanks
Sunil

Hello,
acording to this output:
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
Best Regards,
Michael

Delivery completed indicator in PO for linked empties

Dear All,
in the cross-company PO we have several items. One of the items has the
linked empties (sales and distribution BOM component) which is determined
automatically in PO with item count 11 (if main item has the count 10 so BOM component has count 11 and next item is 20...30 etc.). When we post GR for this PO we have the Delivery completed indicator for all items
except linked Empties (it seems because the linked Empties 11 are the
part of the main item 10 and there is no GR for item 11). So after the GR
we have PO still in the MD04 list for the linked empties.
Is it possible to set Delivery complited indicator for Empties item of PO with standard functions?
Thanks in advance
Igor

Hi,
If you are in ERP 6 and Ehp4, you can use new message M7 433 (The Delivery Complete Indicator is set for the purchase order item) in connection with BAdI MB_GOODSMOVEMENT_DCI. If this message is configured as an error message. No further goods receipt can be posted for a PO item for which the delivery complete indicator is set.
Since you are not working on Ehp4, you can use the BAdI to incorporate custom logic.
Hope this is what you are looking for!
Reetesh
Edited by: Reetesh on Nov 25, 2011 8:20 AM

How can I change my credit card number for my Adobe ID?

Hello,
I'd like to change my credit card number, but Adobe site do not allow this.
Support chat redirected me to a chinese adobe page (I'm from Hungary, can't read Chinese..), then told me to call local reseller support instead.
Local reseller support told us that they can't support creative cloud members, they are being dealt with centrally by Adobe.
Back to chat, describing again what I need to a new agent..
Got the same chinese page from him as well first, then got the same "call local reseller" advice again.
After telling the agent that does not work, he gave me a phone number to call: 852 2916 2125, which never answers. And the agent dropped off..
I haven't been so depressed over a customer support for years.
Can somebody please help me out on how to change my credit card number for my Adobe ID?
Thanks for any useful help in advance.

Ok, found a way: "under the billing section of your subscription within the My Adobe section of Adobe.com after you login with your Adobe ID "
But after updating my info with my new (working) credit card (matercard) it says:
There was a problem in the store. If you wish to complete your purchase immediately, please call 800 0280148.
And this number than answers 'it cannot be accessed'
I'd need this done immediately, so please anyone - any ideas ?!
Thanks.

How to configure release procedure for rate contracts release

Dear all,
How to configure release procedure for rate contract following are the requirements
they are two release codes c1 & c2 <=100000,>=100000
                if c1 is not there c2 has to be approved
     Change in the value of the rate contract contract
     Change in the validity of the rate contract
     Addition of deletion of line items
While using a non u2013 released rate contract in the PO an error message should shoot out.
Also the logic should be changed while using the rate contract in the PO.
The usage of the rate contract should be till the validity of the rate contract. i.e. the measurement should be end date of the rate contract and the PO creation date and not the delivery date of the PO. &
It should be possible to refer existing valid rate contracts in purchase orders.
Regards,
bhaskar

Hi,
In SAP rate contract is known as value contract denoted with wk. The release procedure for rate contract is same as that of other contracts and scheduling agreements. The tables for contracts will vary with SA (Scheduling agreement) .You may try and maintain condition records based on the customer combination and maintian the validity date of condition records as per your requirement.For contract and PO will have the same header/item table as EKKO/EKPO, and the release
class in standard is the same FRG_EKKO, you can use the same for contract.
To distinguish if it's a contract or PO, EKKO-BSART can be used.
For contract EKKO-BSART will be MK or WK, while PO will have NB/UB etc..
You can restrict the document type to set up the release strategy for only contract.
Of cause, you can also create your own release class Z* for contract copying standard
one FRG_EKKO via CL01/Class type 032, and then assign the class Z* to customizing:
OLME:
-> contract
->Release Procedure for Contracts
->Define Release Procedure for Contracts
->Release Groups
If you have already created the PO release class.
Assign a new chracteristic of Document Category -BSTYP
Please check below link for detailed release procedure. I hope this wil help you out .Thanking you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE#RELEASEPROCEDURE-TABLESUSEDFORRELEASEPROCEDURES

IWeb Bugs and a wish for the future. :)

Hi there,
Two issues that I've found moving my photoblog to iWeb, and I'm wondering if they are bugs or issues that the community knows about:
1. I've changed the template I used a lot - font colours, background, etc. Now when I create a new blog entry, it uses the old, standard template and I have to change everything again. Is there a way to make iWeb realise that I've changed my "default" template settings so all new entries remain the same? It seems not. This is my feature wish.
2. Related to this, I solve this problem by just duplicating one of my existing pages and then changing the photo and content and date. The PROBLEM with this is where i think the bug exists. In iWeb, when I click Next/Previous, it goes between the different entries in chronological order, as expected... but when it publishes to .Mac, the next/previous buttons are really messed up, linking to articles/pages that are not even close to being near them in order. I've been able to determine that:
a. Create three new entries in iWeb. Works good.
b. Duplicate the middle entry, put it LAST in the order.
c. The NEXT button on this new, last entry links to the third item, just as the original 2nd item did before I duplicated it.
Is there any way to make iWeb re-calculate the next and previous buttons before you publish it? Or even better, any Apple folks around that can confirm/escalate this?
UPDATE: It's also possible that iWeb is ordering the next and previous buttons based on the time the entry was created in iWeb, rather then the time specified on the entry. If you are porting older entries from a previous blog, this can be a pain because you're not necessarily putting entries in from oldest to newest.
Either way - the behaviour isn't as expected: next and previous buttons ordered by the date specified in the iWeb 'Entries' window.
3. This is more advanced, but seems a bug none the less. I use .Mac publishing, because it's integrated and easy. But I also have my down domain, which I have configured to just "forward" to my .Mac folder. So, when someone goes to www.mydomain.com, the server connects to web.mac.com/me/iWeb/ and makes the request, translating the path. This works really great (save some initial headaches with character encoding), but comments in iWeb blogs don't work when you do this.
They work directly when you go directly to .Mac, but something about the comment system requires that the client browser accurately present the URL to the .Mac server, and in my case, it's reporting my domain name. As a result, when you click to add a comment, you get a "there has been an error" page and it dies.
If this little annoyance could be fixed in a point release version of iWeb, that would be AMAZING.
4. Lastly, one more wish for the future. .mac domain hosting. Domains aren't just for businesses - lots of people have them for their blog/photos/etc now. If I could make my domain point to my .Mac web hosting without any messy translation, I'd be in heaven. I don't even care if I only get my single e-mail address on the domain - just the hosting would be so excellent.
MacBook Pro 1.83 Mac OS X (10.4.6)

It sounds like it! I ported about 10 new posts from my old MovableType installation last night and am seeing the same behaviour - duplicating entries definately breaks the chronological order of next/previous.
Apple?
Is there a place I can file a formal bug report?

Change complete configuration - a wish for Logic

Similar Messages

Maybe you are looking for