Change configuration from standard or workgroup to advanced

Hello again,
I have read that with 10.5 Server you can change from a standard or workgroup configuration to an advanced configuration, but not the other way. However, I cannot find any documentation on how to do this. Has anyone done this or do you know where I can find some docs on this?
Thanks!
Robert

IIRC just run Server Admin and connect to the server. It should warn that the server is running in standard mode and that upgrading to Advanced is a one-way deal.
That's just from memory, though - I've only done it once since all my servers run Advanced.

Similar Messages

  • TS4268 Changing configuration from iMessage to SMS

    A friend recently traded her iPhone in for a Samsung Galaxy. Before the change, our iPhones used iMessage when texting. Now, my iPhone still tries to send her texts via iMessage, which she does not receive. How do I configure my iPhone to use SMS now?

    She should have turned Off iMessage on her iPhone to get her number out of the iMessage System.
    See this:
    Transferring your SIM card or phone number to a device that doesn't support iMessage
    Go to Settings > Messages and turn off iMessage if you plan to transfer your SIM card or phone number from an iPhone to a device that doesn't support iMessage. If you don't, other iOS devices may continue to try to send a message using iMessage first, instead of using SMS or MMS, for up to 45 days.
    From here:
    http://support.apple.com/kb/ts2755

  • Why are some web sites that i have been using for years now all the sudden changing themselves from Standards compliance mode to Quirks mode? How do I change them back to Standards compliance mode?

    Like I will be checking on an account { page is fine} go to a different screen then go back.... This is the fun part. The page starts off normal then all the sudden it shrinks and moves to the right side of the page with out me touching anything. I have had this happen to me a few different times and could not seem to get the help I needed. I bring up another page, look at page info and it says Rendering mode - Standards compliance mode, but on the messed up page it says Quirks mode. How do I get it back to Standards compliance mode?

    Good day ... As I leave California I am still very puzzled at how Yahoo can hijack my pages while on the internet ...? A friend of mine who lives here is also puzzled at how this is happening. I have taken screen grabs and would video it if that is possible ...? The screen grabs have the time taken on each grab, so one can see how fast this happens .. in a matter of seconds Yahoo jumps in with no relevance to my link I was trying to get to or the last hit or any thing stored in my history ... Is this possible ..? As I said I use a Macbook Pro 17", Os X 10.9.5, firefox 33.0.0 ..... Where is the fault ... Is my system compromised ..?
    I am now in South Africa and the problem still exists ... Please see screen grabs that I took and uploaded before ... Please help as I like Firefox over Safari, and do not wish to change ....

  • CHANGE CONFIGURATION FROM SPANISH TO FRENCH

    hello
    I configure my IPAD first time during my holidays in SPAIN on itunes and spanish Windows Vista PC.
    Now how can i configure my installation like a french one.
    For exemple my keayboard is a qwerty instead of azerty.
    My google reseach URL is  spain domain instead of french domain
    Calendar is in spanish ... etc...
    thanks for your help.

    Language : Settings > General > International > Language
    Keyboard : Settings > General > International > Keyboards > select the keyboard at the top right and then select a different layout

  • Is there a way to upgrade from standard configuration to workgroup...

    ...without rebuilding the server?

    I actually meant can you upgrade the initial standard configuration that you choose at setup to the next option which is workgroup. The next choice after that is advanced. I did figure it out though. If you're in a standard config and you try and open server admin it asks you if you want to convert to the advanced config. There's apparently no way to upgrade from standard to workgroup.
    Thanks for the tip about standalone server though!

  • Standard to workgroup configuration?

    Is there a way to convert a standard configuration to a workgroup configuration? The Getting Started guide says one can, yet no matter what I try I end up being faced with converting to advanced configuration. I'm not afraid to do that if I must, but I'd like to keep the simplified Server Preferences control.
    My configuration is two Xserves running Leopard Server. Both are standard configuration, but I'd like one to be a workgroup configuration and replicate the Open Directory on the other. Or am I completely misunderstanding workgroup configuration, does it do replication or just use another directory?

    I actually meant can you upgrade the initial standard configuration that you choose at setup to the next option which is workgroup. The next choice after that is advanced. I did figure it out though. If you're in a standard config and you try and open server admin it asks you if you want to convert to the advanced config. There's apparently no way to upgrade from standard to workgroup.
    Thanks for the tip about standalone server though!

  • Change Query Area from Standard to Global

    Hi,
    I am trying to change the queryarea from standard to global. is it possible to do this or vice versa?
    Thnaks in advance
    Regards
    Rakshan

    hi Rakshan,
    you can do this with program RSAQR3TR.
    hope this helps
    ec

  • HT1751 i bought a new, larger external hard drive. copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive. iTunes will not start or run unless old hard drive plugged in.??

    I bought a new, larger external hard drive. I have my iTunes library on the external drive instead of C: drive, Using Windows 7.
    I copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive.
    iTunes will not start or run unless the old hard drive is plugged in.
    If I disconnect the old drive iTunes shuts down.
    Any ideas. ??

    Hello kskip,
    Thank you for providing so much information about what is going on.  It sounds like you have setup iTunes to save new content to your new external hard drive in iTunes>Preferences, but it sounds like iTunes is not opening iTunes Library.itl file on the new external drive.  You have one last step to take to have iTunes point to your new external hard drive rather than your old one:
    Steps to create or choose a different iTunes Library file
    If iTunes is running, quit iTunes.
    If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
    You should see the following screen:
    Additional information
    If you do not see the screen above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
    Once you select "Choose Library," you will need to navigate to the iTunes Library.itl file on your new external drive. 
    You can find the full article here:
    iTunes: How to open an alternate iTunes Library file or create a new one
    http://support.apple.com/kb/ht1589
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Names in Members field under the UNIX Attributes Tab have changed from standard format (i.e. John Doe) to the actual account name (jdoe)

    Hello,
    Names in Members field under the UNIX Attributes Tab have changed from standard format (i.e. John Doe) to the actual account name (jdoe). The only time this happens is if a domain account is deleted and the remnant of the account remains and has to be removed
    manually. However all of the accounts, with the exception of any new ones recently added, now show the account name only. Any ideas on what caused this and how to fix it?
    Thanks :)

    Hi,
    I have not heard from you for some days, currently I am providing the related article for you. Hope this will help you on this matter.
    The UNIX Attributes tab does not appear in the Active Directory Users and Computers MMC snap-in when Server for NIS is installed in the domain
    http://support.microsoft.com/kb/921913/en-us
    Thank you.
    Best regards,
    Steven Song
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Changing from Standard cost to FIFO

    Hi Experts,
    One of my client want to change from standard cost to FIFO.
    Can you please specify what precautions should I take before proceeding this change ?(system wise/accounting )
    (I am aware of back up procedures,please donot specify that procedures)
    What are the things I should be aware of ?(system wise )
    Thank you
    bishal

    Hi,
    Issue all the stock. After that you can change the valuation method.
    This is a good time to see if everything is alright with the system.
    When all the stock has been issued the following should be true:
    - Inventory Audit Report for all items and all warehouses should be 0 (zero)
    - The balance of all the stock accounts should at this time be 0 (zero)
    If this is not the case. Contact support.
    I take it for granted that you will do this in a testenvironment before doing it on the productive database.
    Hope it helps.
    Jesper

  • Change price control indicator from standard price to moving avg price.

    Hi All,
    There is a material which has a negative stock for the previous period and the previous period is already closed.
    When i want to change the price control indicator from S to V for that material in the current period, it shows an error that "negative stock is there, unable to change price indicator".
    Kindly help me to solve this issue.
    Thanks,
    AK

    the price control indicator can be changed  from standard price to moving avg price at any time .......with some restrictions.
    And one of these restriction is the one you see.
    You must not have negative stock.
    Hence you have to make the negative stock zero
    Since your negative stock is in the previous period, you either have to allow posting into previous periods (trx MMRV , of course Finance has to allow this as well)  first. Then you can post e.g. a 202 movement with previous period date  which has a quantity that equals your negative quantity. then you change your price control, then you do a 201 movement (again with previous period date), finally you can restrict posting into previous periods again in MMRV.
    or you just wait a few days, then with the month end closure your curent period becomes previous period and hopefully you will not have negative stocks again. then you can change the price control without any problem (I usually take care that moving average and standard price are equal befor I change the price control)

  • Configuring New QM notiffication from Standard (F2 and F3)

    Hi Experts
    I am configuring two new notification types in QM copying from standard types F2 and F3.
    When I copy it is not copying all the screens and fields.
    I have to manually copy all the screen and fields.
    As far as I know when I copy from standard it copies all the linkages, screens and realtionship.
    I remember doing that earlier.
    One of the thing I notticed "Execution" tab was missing completely in new Notification type.
    Do I need to do something else?
    Appreciate your thoughts.
    Gaurav

    Dear
    As far as i know you cannot copy all the screen ,tab to new notification type you have to manually do it yourself
    you can copy the screen and tab within the notification only
    regards
    thyagarajan

  • Why can I not find the primary video setting in Bios so I can change it from integrated to PCIE?

    I have purchased a new video card to add to my computer which has integrated graphics.  When I installed the card I got a blank screen so I removed the card and restarted the computer and entered BIOS in an attempt to change it from integrated to PCIE the problem is I cannot find the option to make the change.  I can select advanced chipset but there is no primary video option to select and as far as I can tell there is no option to switch it from integrated to PCIE....  I researched this heavily and am now resorting to this as I cannot find a way to get the video card to work.  I have posted the options I have in my system's Bios below.  Thnks for looking   BIOS Version 2.14.1219Options:Main     Advanced      Power      Security      Boot Options       Exit Main:System infoDateTimeAdvancedMiscellaneous            AHCI Post 1 Not Present            AHCI Post 2 Not Present            AHCI Post 3 Not Present            AHCI Post 4 HL-DT-ST- DVDRAM GH7ON            AHCI Post 5 Not PresentAdvanced Chipset Configuration            Intel EIST             [Enabled]            Intel Turbo Boost [Enabled]            Intel AES-NI        [Disabled]            Intel XD BIT        [Enabled]            DVMT Mode        [DVMT]            DVMT Memory Size [256mb]Integrated Peripherals            Onboard SATA Controller [Enabled]            Onboard USB Controller [AHCI]            Legacy USB Support [Enabled]            USB Storage Emulation [Auto]            Onboard Audio Controller [Enabled]            Onboard LAN Controller [Enabled]            Onboard LAN Option ROM [Disabled]PC Health Status            {Health Status info}Smart Fan [Enabled]PowerACPI Suspend Mode   [3(STR)]Deep Power Off ModePower On By RTC AlarmPower on by PCIE AlarmPower on by Onboard LANWake up by PS2 Keyboard/MouseWake up by USB Keyboard/MouseRestore on AC Power LossSecuritySupervisor passwordUsername PasswordChange Supervisor PasswordBoot Options1st Boot Device2nd Boot Device3rd Boot Device4th Boot Device5th Boot DeviceEFI Device PriorityHard Disk Drive PriorityOptical Disk Drive PriorityRemovable Device PriorityNetwork Device PriorityQuiet Boot OnHalt OnExit    

    iPhone User Guide (For iOS 7 Software)Sep 20, 2013 - 23 MB

  • Change names from ECR/ECO system status screen (cc01, cc02)

    Hi all,
    I’m working with ECM main screen (CC01, CC02…) and the names assigned in the Standard process are not meeting tour needs and some steps are missing in order to cover all the specifications.
    If in a easy way I could change the name of the system status steps ( for instance change “Convert ECR” into “Start modifications”) will be great and, if this change could be link to a type of ECR would be like a dream because this will meet all the client requirement.
    Any comment or suggestion in how to do that? User status are not valid :S
    Many thanks in advance
    Alberto

    Hi alberto,
    I think you can't change it from "Convert ECR" to "Start Modifications" but you can use create your own Statuses as required and can be control through Status Profile where in you define this. and in first screen of CC31 or CC01 you need to make this "Profile" Field as Mandatory.
    Change type can also be linked to Profile, this way your client requirement will be fulfiled.
    Hope this will solve the problem
    Regards
    Rehman

  • How to call custom BSP application (copied from standard)

    Hi,
    I came across 1 interesting link in SDN.
    [Enhancement procedure of BSP application HRRCF_RECRUITER in eRecruitment]
    My requirement is also similar.
    I need to copy the HRRCF_TRM_SRCH application.
    I know how to make the changes for the logic (like copying the standard controller & iterator class etc.)
    But I donu2019t know how to call the custom BSP application.
    One requirement is, I need to call a BSP application, in which there are only UI(user interface/screen) changes .
    That is, if there are only changes made to hitlist_cand.bsp page . And no changes made to hitlist_cand.do page.
    Eg: Removing one button from screen.
    Second requirement is, I need to call a BSP application in which there are logic changes also.
    (I know how to  change the standard controller class to custom class)
    Eg: Changing logic of button.
    We tried renaming the application name from standard to custom one (with Namespace=SAP itself, though it gave a warning) in the table T77RCF_LOG_APPL .
    Then we used this name to configure the start page link. But still the execution control is going to standard page & not to custom BSP application.
    How will I know which BSP application(Appl A), is calling the BSP application (Appl B) in which I want to make changes ?
    The starting application is HRRCF_START_INT.
    Would really appreciate solutions posted.
    Thanks,
    Nisha Vengal.

    Hi Nisha,
    I think you have an issue to call custom BSP.
    -     Ignore the warning message (in the table T77RCF_LOG_APPL) as it is just a warning message. I did not touch start page link at all.
    -     Additionally you need to make (I had to made) an entry in table u2018V77RCF_SMG_NAVIu2019.
    Let me know, if you need anything else.
    ...Naddy

Maybe you are looking for