Change connection timeout, not found waiting for dialup connection

Using Firefox 6.02 on Vista 32.
The dial-up connection is slow connecting which cause Firefox to time out with a page not found while waiting. Is there a setting to extend the time out?

Mark,
This has been implemented in Headstart PATCH6530_for_6i and PATCH6530_for_9i.
Regards,
Marcel

Similar Messages

Security requirement for dialup connection

Dear All,
I have installed Cisco 3745 router with NM 8A/S module at central location which is connected to the PSTN network for dialup connectivity. Now remote users are connecting to central location through PSTN dialup connection.
Is it possible to do some configuration at central cisco 3745 router so that a specific telephone number subscriber can only make dialup connection to a specific NM 8A/S port.i.e. is it possible to restrict the diaiup users based on their telephoine number at the central router.
Also is it possible to create GRE or IPSec tunnel in this dialup connection.
With Regards
Anand

Check out the following link...
http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuration_guide_chapter09186a00800d984a.html

Create a public synonym for a db link - "Connection desccriptor not found".

I want to create a public synonym for a db link.
The existing db link name is tst.world ( which is in db links table and is working fine).
I created the following db link using the following command:
create public synonym "syn.world" for "tst.world";
It created the synonym successfully.
If I try the following, it throws error "Connection desccriptor not found".
select * from [email protected];
It says "Connection desccriptor not found".
Any suggestions.
Thanks in Advance.

Well then, lookup the Documentation on the CREATE SYNONYM statement in the SQL Language Reference manual.
The documentation lists the types of objects which you can create synonyms for.
You can create synonyms for objects referenced across DBLinks.
You cannot create synonyms for DBLinks.
Hemant K Chitale

My MacBook Pro persistently will not connect to my wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

My MacBook Pro persistently will not connect to my MiFi Verizon wireless router. The message "connection timeout" appears. What is a connection timeout and how can I fix?

Hi there terri900!
You may want to try configuring your router settings to match the recommended settings for iOS and OS X devices, which can be found here:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
You may also find some helpful information for troubleshooting this issue in this article, which can help you with any manner of issues with Wi-Fi connections:
Wi-Fi Quick Assist
http://support.apple.com/kb/HT1145
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How to resolve: "Update server not found (check your internet connection)"?

When doing Help / Check for Updates, I get "Update server not found (check your internet connection)". This has been the case for 6-8 weeks or longer but auto update worked fine before. Not sure if something changed on my MacBook Pro. If so, I can't pinpoint it.
MacBook Pro (Intel Core 2 Duo)
Mac OS 10.6.6
Firefox 3.6.13
Firefox set to "No Proxy"

See iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - Disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

External content type error: Business Data Connectivity object not found.

Hello
I have to change the external database (external system) for an external content type. The database view on the new database is exactly the same as on the old database.
After changing the external system of the external content type, this happens:
When I try to add a new item to the list, I get this error under the external data field:
"Business Data Connectivity object not found. Administrators, see the server log for more information."
Also, when I try to update the external data field, it is not possible because the buttons are grey.
When I add a new external data field to the same list, I can use the external content type. For some reason the current external data field doesn't update.
Any ideas?
Any help would be much appreciated!

Have you implemented both ‘Read List’ & ‘Read Item’ operations in your ECT?
This may be helpful -
https://sharepointcreations.wordpress.com/2014/03/13/business-data-connectivity-object-not-found/
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Could not load library for database connection LCA

Hi,
I am facing RFC connection prblem while connectiong to database. I have installed SCM5.1 and live cache in single server
Please find the logs.
Work process log:
B Mon Jul 20 11:19:13 2009
B create_con (con_name=LCA)
B Loading DB library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll) Error 126 [dlnt.c       241]
M          Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll'
[dbcon.c      4731]
B ***LOG BYG=> could not load library for database connection LCA        [dbds#1 @ 1035] [dbds    1035 ]
A
A Mon Jul 20 11:21:58 2009
A GENER starting remote generation: /SAPAPO/OM_SYNC_LC_DB (requested by W1).
B
SM21:
No shared library found for the database with ID LCA|
No shared library found for the database with ID LCA
/SAPAPO/OM17|/SAPAPO/OM_SYNC_LC_DB|K |SAP Web AS Problem|SBAC   |
Documentation for system log message BY G :
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
ST22
Runtime Errors         DBIF_DSQL2_CONNECTERR
Exception              CX_SY_NATIVE_SQL_ERROR
Date and Time          20.07.2009 11:22:21
Short text
Error setting up a secondary database connection
What happened?
Connection to database system not possible with identifier "LCA".
|----
System environment
SAP-Release 700
Application server... "
Network address...... "
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 8
Shortdump setting.... "full"
Database server... "
Database type..... "ORACLE"
Database name..... "SC7"
Database user ID.. "SAPSC7"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 701
created (date)... "Jul 6 2009 23:47:55"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "OCI_10201_SHARE (10.2.0.2.0) "
Patch level. 50
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Information on where terminated
Termination occurred in the ABAP program "SAPLSLCAPPS" - in
"LCA_EXISTS_LCA_ROUTINE".
The main program was "/SAPAPO/TS_BATCH_RUN ".
In the source code you have the termination point in line 23
of the (Include) program "LSLCAPPSU05".
The program "SAPLSLCAPPS" was started as a background job.
Job Name....... "MACROS"
Job Initiator.. "SC7GEN"
Job Number..... 10222002
The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
in
procedure "LCA_EXISTS_LCA_ROUTINE" "(FUNCTION)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLSLCAPPS "; its source code begins in line
1 of the (Include program "LSLCAPPSU05 ".
Please help me to resolve the issue.
Suraj

Hi Natalia Khlopina,
I have raised OSS message to SAP.
Below is the information
E:\usr\sap\SC7\SYS\exe\uc\Copy_ of_NTAMD64_15062009>sdbregview -l
Server Utilities    e:/sapdb/programs      7.7.02.08     64 bit    valid
DB Analyzer         e:/sapdb/programs      7.7.02.08     64 bit    valid
PCR 7301            e:/sapdb/programs      7.3.01.21               valid
PCR 7500            e:/sapdb/programs      7.5.00.42     64 bit    valid
SAP Utilities       e:/sapdb/programs      7.7.02.08     64 bit    valid
APO LC APPS         f:/sapdb/lcs/db/sap    6.00.004      64 bit    valid
Redist Python       e:/sapdb/programs      7.7.02.08     64 bit    valid
Base                e:/sapdb/programs      7.7.02.08     64 bit    valid
JDBC                e:/sapdb/programs      7.6.03.02               valid
Messages            e:/sapdb/programs      MSG 0.5010              valid
ODBC                e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 77           e:/sapdb/programs      7.7.02.08     64 bit    valid
Database Kernel     f:/sapdb/lcs/db        7.7.02.08     64 bit    valid
Loader              e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC              e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 76           e:/sapdb/programs      7.6.01.15     64 bit    valid
Fastload API        e:/sapdb/programs      7.7.02.08     64 bit    valid
C:\Documents and Settings\sc7adm>disp+work
disp+work information
kernel release                701
kernel make variant           701_REL
compiled on                   NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Jul 6 2009 23:47:55
update level                  0
patch number                  50
source id                     0.050
supported environment
database (SAP, table SVERS)   700
                              701
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Thanks for quick responce.
Suraj

Waiting for a connection... all the time

Hi there
Waiting for a connection...
This information display all the time after instalation wht's I'm doing wrong - network that I use is my home wi fi because of other device thath i want to pair

1. Do You have installed on Your PC and turned on Adobe Edge inspect CC
2. and You are Login create Adobe creative cloud ?
I'll try instal with new account on other PC and try to write down step by step how to run this.
There is always small thing that mess up everything
Try one more time:
In chrome select change status from O to I to turn on EI turn on your EI in PC and when you see in chrome Your name and IP adress open application on mobile (should work in same Wi-Fi both PC and mobile) Click + sign and input your IP adress and Join

ORA-02049: timeout: distributed transaction waiting for lock

Hi,
My name is Guneet and I'm working on an application running on BEA Weblogic Server 9.2 running on a Red Hat Linux box using Oracle 10g as the database. My problem is that recently our code started getting the following exception while updating a database table.
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-02049: timeout: distributed transaction waiting for lock
Application Details
* Using Stateless Session EJB
* Only one Business method in this EJB with transaction attribute set to "required"
* This method executes two select queries & one update query
* We are using JDBC to access the database.
* We have configured a Data Source & are using it to get a database connection.
* Weblogic's Oracle Driver is being used.
More details
* The application has been running well since a month.
* Two days ago,the update query failed with the above error.
* At that time, a single client was accessing the system.
* Once this problem occurs, it starts appearing frequently.
* Eventually a request to get a connection from the Data Source times out & the exception copied at the end is thrown
* At this stage the application gets stuck and all requests trying to get a connection end up with this exception.
* Fortunately, Restarting the Weblogic Server gets us out of this problem and transactions resume normally.
Now my questions are
# Why is this error happening & what does it mean?
# It looks like the second exception (unable to get a connection from ds) is an after effect of the first problem (ORA-02049) once it appears for a couple of times. Can somebody validate this?
# Though I don't understand JTA well but I don't think this application needs distributed transactions so, I'm thinking of modifying the driver type to non-XA oracle driver. Any advise/pointers/comments on this front is welcome !!!!!!!!
Thanks
Guneet Sahai
Exception Trace
Dec 27, 2006 4:47:50 PM | com.gisil.themis.db | SEVERE | Unable to load merchant DEL = 911168900164. Reason - java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMERR start() failed on resource 'themis-ds': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException: Unexpected error during start for XAResource 'themis-ds': Transaction timed out after 29 seconds
BEA1-252DE51AC930078CA638
at weblogic.jdbc.wrapper.XA.createException(XA.java:103)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:753)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1182)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1115)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:274)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:497)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:429)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1408)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1413)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

guneet sahai wrote:
Hi,
My name is Guneet and I'm working on an application running on BEA Weblogic Server 9.2 running on a Red Hat Linux box using Oracle 10g as the database. My problem is that recently our code started getting the following exception while updating a database table.
java.sql.SQLException: [BEA][Oracle JDBC Driver][Oracle]ORA-02049: timeout: distributed transaction waiting for lock
Application Details
* Using Stateless Session EJB
* Only one Business method in this EJB with transaction attribute set to "required"
* This method executes two select queries & one update query
* We are using JDBC to access the database.
* We have configured a Data Source & are using it to get a database connection.
* Weblogic's Oracle Driver is being used.
More details
* The application has been running well since a month.
* Two days ago,the update query failed with the above error.
* At that time, a single client was accessing the system.
* Once this problem occurs, it starts appearing frequently.
* Eventually a request to get a connection from the Data Source times out & the exception copied at the end is thrown
* At this stage the application gets stuck and all requests trying to get a connection end up with this exception.
* Fortunately, Restarting the Weblogic Server gets us out of this problem and transactions resume normally.
Now my questions are
# Why is this error happening & what does it mean?
# It looks like the second exception (unable to get a connection from ds) is an after effect of the first problem (ORA-02049) once it appears for a couple of times. Can somebody validate this?
# Though I don't understand JTA well but I don't think this application needs distributed transactions so, I'm thinking of modifying the driver type to non-XA oracle driver. Any advise/pointers/comments on this front is welcome !!!!!!!!
Thanks
Guneet SahaiHi Guneet. If you want to debug the JTA issue, I suggest opening an official
support case. They will lead you through producing the JTA debug information.
However, I believe you are correct that the transaction you describe is
completely doable with a simple local transaction, so if you were to alter
your pool to use the non-XA driver, it would probably be faster, simpler,
and just work.
Let me know...
Joe
>
Exception Trace
Dec 27, 2006 4:47:50 PM | com.gisil.themis.db | SEVERE | Unable to load merchant DEL = 911168900164. Reason - java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMERR start() failed on resource 'themis-ds': XAER_RMERR : A resource manager error has occured in the transaction branch
javax.transaction.xa.XAException: Unexpected error during start for XAResource 'themis-ds': Transaction timed out after 29 seconds
BEA1-252DE51AC930078CA638
at weblogic.jdbc.wrapper.XA.createException(XA.java:103)
at weblogic.jdbc.jta.DataSource.start(DataSource.java:753)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1182)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1115)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:274)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:497)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:429)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1408)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1413)
at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1332)
at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:440)
at weblogic.jdbc.jta.DataSource.connect(DataSource.java:396)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:359)
at com.gisil.themis.db.impl1.DbManagerImpl.isPinValid(DbManagerImpl.java:872)
at com.gisil.themis.ejb.ThemisBean.isPinValid(ThemisBean.java:185)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl.isPinValid(Themis_aqqc4k_EOImpl.java:207)
at com.gisil.themis.ejb.Themis_aqqc4k_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:517)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:224)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:407)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:403)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:56)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicServerRef.java:934)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)

OWB9.0.4-- ORA-02049: timeout: distributed transaction waiting for lock

I'm running a simple mapping that copies all columns of data (using a filter on date for just current records) from one table in SQL Server into a staging table on my Oracle DW schema. It's using a dblink with transparent gateway for SQL Server, which works fine from SQL*plus.
The map is in default mode (bulk-failoverto-row) with bulk size and commit frequency = 1000.
The audit details show the first 1000 rows selected on the source, with an error on both the source and target tables:
Target--
ORA-02049: timeout: distributed transaction waiting for lock
Source--
ORA-01002: fetch out of sequence ORA-02063: preceding line from INTERGRATION@JXNSQL01
(INTERGRATION@JXNSQL01 is the dblink name)
Any ideas on how I can clear this up?
Thanks,
Paul

Hi,
After having upgraded to 9.0.4 (from 9.0.3) I'm running into exactly the same problems with some of my mappings. Actually I don't get any rows transferred from the mappings that fail.
Out of 7 mappings, 3 worked just liked before while the 4 others just keep on running until I cancel them and I then see the BUSY/ORA-02049 in the Audit Browser.
When comparing the mappings I see that the 3 that works all use some custom Procedures I have made.
The 4 that doesn't work are all very simple - one of them just loads all the content from a table with two columns in my source to another table with two columns in my target! Two of the other mappings that doesn't work includes some simple CASE-expressions.
Both my source and my target resides in a Oracle 9.2.0.3 database (not the same).
Regards,
Bent Madsen

EXIT BUTTON - PAGE NOT FOUND issue for Address

After customization of home page, we are getting page not found error for the Exit button in Address and in some other applications, it is opening a new window and in some other applications, the screen is getting struck and the backend user id is getting locked.
Could some one suggest me ? I feel we make the exit button invisible so that end user will not click on that totally. Is this a good idea?

You can of course hide the exit buttin via personalisation
read the sap note 951257 for the issue you are having
The solution is to go and make the necessary entries.
       -   Go to V_T7XSSSERARBC view.
       -   Select the Area for which the exit button is not working.
       -   Enter 'Area Link Type' if not entered already.
       -   Enter 'Link Resource' if not entered already.
       -   Save the changes made.
With regard to the WorkProtect Mode, Ifollow the note #734861 -
"WorkProtect Mode - Global Settings".
also check the steps here
While creating an iView instance there are two option
-paste
-paste as delta link
You should choose paste as delta link option.
Please check the link for more information-
http://help.sap.com/saphelp_NW04s/helpdata/en/f5/eb515d0e6a11d7b84900047
582c9f7/frameset.htm
We checked the attachments, it seems that when you run the application
from preview mode you will not see 'exit' button. If you run the
application directly you will not see 'exit'button.
'Exit' button feature comes into picture when you consider that
application should use home page customizing feature.

Waiting for a connection...

I have installed the Adobe Inspect app on my Android 4.4.4 , I have installed the extension for Google Chrome on my Window 7 desktop, I have installed Adobe Edge Inspect CC on my Window 7 desktop. I am signed in to creative cloud. Both the device and my laptop are connected to the same WiFi network.
I cannot get the Android device and laptop to recognize each other. The extension in Chrome, it's just spinning and says "Waiting for a connection..."
I have tried tapping the "+" on my iPhone and have added the IP address manually and get the message "Connection unseccessful, please try again."
Connection to Port 7682 is established only when Edge inspect is running.
Firewall Connections are open . Find below the screenshot.
Screenshot
Console tab in background.html on chrome browser does not gives any error.
Please assist and help me resolve the issue.

Most likely devices and desktop are not connected to the same WiFi Network, or something is blocking port 7682 that Edge Inspect uses for communication between the apps. You might also want to check with IT department to see if they block communication across that port.

HT1937 My iPhone was working correctly with FaceTime but now it's not , say (waiting for activiation) what should I do ?? Kindly if you can help!!

My iPhone was working correctly with FaceTime but now it's not , say (waiting for activiation) what should I do ?? Kindly if you can help!!

Thanks for your answer...
My iPhone was connected to a wifi internet when I tried to activate it and when I tried activation by iTunes I was using my laptop with windows 7 which was connected to internet by cable.
I updated my iPhone to IOS 7 when I was in Egypt and I had no problems with updating it and I can't remember if finding my iPhone option was on or off before updating to IOS 7 and as i understood from searching internet that to use iCloud Finder on web from computer to find my iPhone it should be set up already on my iPhone and I didn't set up iCloud on my iPhone before and my Apple ID wasn't verified for iCloud till today, I verfied it by logging in iCloud from a friend iPad.
I was considering already the option that my iPhone has been hacked but if this happened so how I would unlock my iPhone and activate it to back to work? who would help me with that? I'm so tired of being without my phone for almost 4 days and I started to consider not having any Apple product anymore... I think that this way to secure the consumer has a lot of conflicts...

TS1398 I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays "C

I have I-phone 4S - Since updating to IOS 6, when at home with Wi-Fi network with my I Phone connection is not responding sometimes – for example if I want to check my G-mail it shows loading but nothing happens and after few minutes it displays “Cannot Get Mail” – The mail server “imap.gmail.com is not responding, Verify that you have entered the correct account info in mail settings
Other times the Wi-Fi connection works fine and it check e-mail or other within few seconds. The connection problems seems to be intermitted
This issue never happened before with IOS 5 since I bought the new phone in Oct 2011.

We suffered the imap.gmail.com server problem After an IoS 6 upgrade. The simple solution is to delete the problem account, shut down the iPad, start up again and reenter the account. Everything comes back normally. Good Luck everyone!

Class not found exception for the startup class defined.

iam using weblogic server 10 and bea jrockit 1.5.0.12.
i have created a startup class in the admin console for a web project and i have deployed the war file using the console in a user defined domains, user project directory.
when i start the server, iam getting class not found exception for the startup class.
But, the startup class is available in the web archive (war). how should we add the classes and jars in the war to the classpath in setDomainEnv.sh or is there any other setting available in the console to enable this.

Hello Julius,
yes sure, we can move this post to the NW admin forum. I have already posted similar thread on sun forums. I was hoping that someone from SAP SDN already tackled this problem and if not someone specialized in J2EE Engine could troubleshoot me from the class problem I'm getting. I don't know if it's specific from the agent or if this ClassNotFound is a general SAP J2EE Engine error relating to a library not correclty defined.
Kind regards,
Tanguy Mezzano

Change connection timeout, not found waiting for dialup connection

Similar Messages

Maybe you are looking for