Change country code for Montenegro from XM to ME

Hi Everybody,
Could You please somebody advice, whether You have any experiance with changing existing country code in SAP? I need to change it in all tables in for Montenegro.
What should be a good approach to start with?
Do You think that SLO service provided by SAP is a good idea for this?
Is there any OSS note how to deal with this complex change?
Thank You in advance,
Martin

here's the ping result:
AP -> German WLC:
ELT-CONNECT>ping "German-WLC"
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.254.254.9, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/77/364 ms
ELT-CONNECT>
AP -> French WLC:
ELT-CONNECT>ping "French WLC"
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.254.6.241, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 272/847/1564 ms
ELT-CONNECT>

Similar Messages

  • HOW DO CHANGE  COUNTRY CODE FOR ITUNBES I STILL HAVE CREDIT IN ANOTHER COUNTRY?

    how do i change country code for itunes if i still have credit in another country?

    Click here and request assistance.
    (63856)

  • How can i change country code for a 3310 all in one? we have moved from Japan to Germany

    We have moved from Asia/Japan to Germany. I bought a set of new cartridges, which unfortunately are not accepted by the printer. Need help..... In the internet I found that I am not the only one to have this problem. As the printer is older than a year I either _ throw away.....or.....move back to Japan.   Both are not alternative. Can someone help. Need guidance on how to change the country code of the printer

    enno,
    Check out this post. It has some real good information about ink after moving to another country.
    http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead/Finding-and-installing-cartridges-after-m...
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Change the default country code for new contacts in Outlook 2013 for countries not listed in Control Panel Region Format

    Dear all,
    I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
    Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
    I am using Windows 8.1
    I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
    Format List.
    Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
    Kind regards,
    Osvaldo

    Hi,
    Windows uses the information set under
    'Phone and Modem'  in the Control Panel to determine the default area code.
    You can change the country/region to
    Mozambique
    and set your area code here:
    Regards,
    Steve Fan
    TechNet Community Support

  • How to change commodity Code for material grp in certain plant

    Hi,
    I would like to change commodity code for some material group under certain plant
    May I know how to do this.
    I went to the following SPRO path, however, the table does not mention the plant and the material group for me to change.
    SD>Foreign Trade/Customs>Basic Data For Foreign Trade>Define Commodity Code/Import Code Numbres by Country.
    Please let me know.
    Thank.
    Tuff

    Hi,
    Commodity codes are define at country code level not on basis of plant or material group
    Weather it is one plant or many plants belongs from one company or different companies the commodity code is unique and it define by country legal authorities which are responsible for foreign trade.
    You can add commodity code for country and then you individually or by mass change you can change in material master.
    Kapil

  • Macbook Pro 15 Change Country Code to get 11n and 300 Mbit/s

    Hello All!
    I have a question: how can I change Country Code on my MBP 15" to get wi-fi 11n mode and 300 Mbit/s (or at least 130) with my TL-WR1043ND router. I've changed the Region setting in the web interface of my router, but it didn't solve the problem. And there is a wonder but my macbook 13" has Country Code: X2 (sometimes FR) and use 11n mode with transmit rate: 130 Mbit/s. So, as for me, that is very strange dependence — Country Code and Connection Speed.
    System info:
    Router preferences:
    Thanx!

    So, I have MBP 15-inch, Mid 2010 and MB 13-inch, Mid 2009. And, as I said before, MB 13 doesn't have the problem with 11g mode, it has Contry Code X2 or sometimes FR, but never UA. And the MB13 is older then the MBP15. Maybe problem is in the router, but I don't know how figure out it. And I don't understand, at all, the dependence Transfer Rate and Country Code — why software is restrict connection speed of hardware?

  • Changing commodity Code for material grp under certain plant

    Hi,
    I would like to change commodity code for some material group under certain plant
    May I know how to do this.
    I went to the following SPRO path, however, the table does not mention the plant and the material group for me to change.
    SD>Foreign Trade/Customs>Basic Data For Foreign Trade>Define Commodity Code/Import Code Numbres by Country.
    Please let me know.
    Thank.
    Tuff

    Hi Tuffy,
    The commodity codes are defined by Country, not at Plant-Material group level.
    You can find this customising on: SPRO > Materials Management > Purchasing > Foreign Trade/Customs > Basic Data for Foreign Trade > Define Commodity Codes / Import Code Numbers by Country.
    I hope this help.
    Kind regards,
    Sandra

  • Default country code for phone

    Hi,
    When editing new phones, the sistems suggest me the country code for united states, however i have my locale to spanish. How can i make the system to suggest a default country code for phone numbers (example uruguay)?
    How can i do a mass update to change the country code? is there anyway to do a mass update for more than 50 records?
    thanks

    thanks bob, is there any way to make the the system to automatically enters a country code for my country Uruguay? there is no locale for uruguay, so when i choose locale spanish spain or spanish mexico it automatically adds the country code for spain or mexico.
    thanks

  • Change country code keep getting code:5107 what's this and why cant I  change the country

    Change country code keep getting code:5107 what's this and why cant I  change the country

    Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

  • Change region code for ink cartridges

    how 
    Change region code for ink cartridges From Europe To Middle east

    Hi @AhmedAdel9 , welcome back to the HP Forums!
    I see you're looking into regionalisation options.  I'd like to point you in the right direction.
    To get this regionalized, I'd recommend giving us a call.  You can utilize this website to learn how to contact us appropriately, based on your region: Contact HP Worldwide.
    Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HT4480 I have redemption codes for FCP from my university - how many machines can I install on?

    I have redemption codes for FCP from my university - how many machines can I install on?

    Do you have these codes because this will be your app? Or is this a "loan" from the school to install on your machine? Do you use your own Apple ID to redeem the code and install the app?
    If it is your app, then you may install it on as many Macs as you own or have in your control.

  • All my contacts are stored with country code for eg   233 244 123456. Contact names do not appear during incoming calls. Once the country code is removed , names appear. Please help

    All my contacts are stored with country code for eg   +233 244 123456. Contact names do not appear during incoming calls.
    Please help

    http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

  • I would like to change country of Apple ID from US back to Thailand

    help me
    I would like to change country of Apple ID from US back to Thailand

    Changing country on an account : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account .

  • What is the country code for my Apple ID phone number? Normal att phone in austin tx

    what is the country code for my Apple ID phone number? Normal att phone in Austin Texas

    I hear you. I put a "1", & it won't accept that. Just keeps coming back w/ "Please specify a valid mobile phone number". I tried to put a "+" in front of the "1", but it won't take that @ all...

  • Based on personel number, how do I get country code for that person?

    Based on personel number, how do I get country code for that person? Is there any function module to allow me to do that? Thanks!

    Hi,
    Check function module HR_PERNR_COUNTRY_GET.
    Donnie

Maybe you are looking for