Change customer for PS project

Hi, I am a PS user. I have a customer wrongly assigned to a project.
Can I have this changed? Please advice on the steps in details.

Ahmed, I'd request you to not respond if you are not value-adding. One would not ask this question if one had known this. I have come in the middle of a project (as a user) and have no one accept for sdn to query this from, now.
I repeat, be a gentleman (or a lady if you are one) and do not write redundant. It worsens one's mood, just as this message has worsened yours. And now, please do not respond if you do not have, or do not feel like sharing, a resolution.
Have a wonderful day ahead. And let others have too!
Edited by: Virendra Pal on Aug 4, 2010 7:52 AM
I do not find Ahmed's post offensive. He is absolutely correct in his answer. Infact I find your reply very offensive and unwarranted. I will leave this post for others to reply if they wish to. If you are new to PS then I sugest that go and learn PS via training or become an understudy to a PS consultant. SDN forum is not there to solve all your problems - it is simply a support mechanism for PS professionals to share genuine ideas. If you have no one else then talk to your employers about this, don't take it out on expert forum members like Ahmed. And by the way if you do not know if "Ahmed" is a gentleman or a lady then I think you might consider going back to school and re-educate yourself. Please note that in future if you post such offensive posts then you will cease to exist as a member of this forum. Hope you are having a wonderful day.

Similar Messages

Change customer for a project!!!!!!!!

Dear Gurus,
I have a project number for which was changed to a supply order.
Just i created the project entering the details.No cost or anything assigned to this.
Now i want to assign this project for another project contract i received now.
I am able to change the project details like name, long name etc.
But i am not able to change the "customers and contacts " and sales man details from Projects Templates.
Can any one able to guide me, how can i edit the customer and contacts.

Hi
The easiest way is to abandon this project and start a new one :)
If you insist on staying with the same project, you may add a different customer to the same project.
For the wrong customer go and update the contribution percentage to zero (using Tools > Examine).
Dina

Report: user/systems status with change details for a project

HI.
I am aware of CN41N/CN43N transaction.
Is there a way to pull a report for a project with system status, user status and the details of who made the changes with date and time???
thanka a lot in advance
Regards
SURYA

Hi
If you have change documents active for status management and project profile then you can get the data from JCDS table directly (changed status and who changed it). Note that you will get the status in SAP internal code and you need to refer TCJ30 table for status.

Change customer for purchase requisition

Hi gurus,
i'm trying to change customer number for purchase requisition.
i tried to enter this code in badi ME_PROCESS_REQ_CUST~PROCESS_ITEM but KUNNR is not changed:
DATA : ls_item_data   TYPE mereq_item,
         ls_item_datax TYPE mereq_itemx,
         lv_obj         TYPE REF TO object,
         lv_attr        TYPE string,
         lv_aktyp       TYPE aktyp,
         lv_kunnr       TYPE ekunnr.
FIELD-SYMBOLS : <fs_lcl> TYPE any,
                 <fs_source> TYPE any.
IF im_count EQ 1. " to avoid infinate Loop"
Access Attributes value of Local Class
for getting the transaction mode of Line item
H-> Create
    lv_obj ?= im_item.
    MOVE 'MY_STATE->AKTYP' TO lv_attr.
    ASSIGN lv_obj->(lv_attr) TO <fs_lcl>.
    lv_aktyp = <fs_lcl>.
    IF lv_aktyp EQ 'H' OR lv_aktyp EQ 'V'.        "While creating line item"
Extracting existing Item Data and Modify the fields
Requestor Name (AFNAM) & Source of supply details
      CLEAR : ls_item_data.
      ls_item_data = im_item->get_data( ).
     ls_item_datax = im_item->get_datax( ).
     MOVE ls_item_data-ernam TO ls_item_data-afnam.
      lv_kunnr = '0000100000'.
      ls_item_data-kunnr = lv_kunnr.
         ls_item_datax-kunnr = 'X'.
     im_item->set_datax(
     EXPORTING
     im_datax = ls_item_datax ).
      im_item->set_data(
      EXPORTING
      im_data = ls_item_data ).
    ENDIF.
ENDIF.
when trying changing other fields like AFNAM for example, the data is changed.
the customer number exists in KNA1.
any ideas?
Thanks,
Sagit.

SEARCH SEARCH SEARCH SEARCH SEARCH SEARCH SEARCH
Good work

Create change lists for HDCAM project without Cinema Tools?

Hi
We have an HD project, shot on video, and are getting to final stages of mixing. Is there way to set a version, and then make changes and generate a change list? Needless to say, we haven't been using Cinema Tools (and the Export Change List process asks us to select a CT database). Is this only possible for film projects?
Thanks!
Matt

Actually, I figured it out.
1) Open Cinema Tools and create a new, blank database. Remember its name and where you saved it.
2) Open your original sequence in FCP. Go to FIle - Export - Cinema Tools Film Lists. If it's a video project, you can ignore the film-specific fields (footage length, key numbers and the like), but make sure that "Save a Cinema Tools program file" is ticked. In the columns on the right, I have "Time", "Source Time" and "Clip name" added. When prompted, locate your database file.
3) Export the file.
4) Now, open the changed sequence in FCP. Go to File - Export - Cinema Tools Change List. Locate the Cinema Tools program file you saved earlier.
You can select "Combine deletions" if you don't want to see separate edits across a multi-clip deletion. (ie, trim tail, delete clip, delete clip, trim head).
The first few pages will probably be most useful for video projects, since they use timecodes; the other sections of the report seem to be based on key codes.
Matt

Making a small change to an old project - How do I know what versions of Drivers and RIO etc was used for the last good build?

If I want to make a small change to a legacy project of years ago, I want to limit my risk by using the exact same versions of LabVIEW, NI-RIO etc. So I check out the project from the repo, but I don't know how to check what versions were used when the last know good build was made. I don't want to introduce issues by mass-recompiling to the latest version.
What is best practice in this case? I could, before every repo commit, take a screenshot of MAX's software tree and save this in the project folder.
Any ideas?
Solved!
Go to Solution.

The report is a great idea! I store both a max technical report and a project.NCE (HW config export) with each of my projects for this exact reason. Those files have sure come in handy!
Also- its a good idea to make an image of the target as accepted and archive it somewhere. ESPECIALLY for PXI based systems from NI. (When the customer comes back for a "duplicate" just send the image with the PO and the system arrives fully configured)
Jeff

Customer Input Templates for template project

I am unable to see all the three CI templates specific for organizational data , master data and business process in the template project.These are part of standard document types available in solution manager for template project.Are there any settings/patches related to the same?

Hello Prasad,
Regarding the CIT, the following types are delivered with SAP Solution Manager 4.0:
CIT Customer Input Template Business Processes
CITG Customer Input Template Business Processes (Global Project)
The later one is to be used for global or template projects. As you can see, there is only ONE specific template which is delivered by SAP. However, you can design your own templates in the project template directory in transaction SOLAR_PROJECT_ADMIN.
This information is based on SP10, however, I am not aware of any changes in earlier support packages of ST (being the software component which might possibly include such changes).
So this is the current status - I hope this information helps.
Best regards,
Doreen Baseler

Changing customer number in alv top of page for every new customer

hi experts,
in alv grid display top-of- page, how to change customer number customer name for every new customer.
please help me.
Regards
Naveen.

You may look into this blog
http://help-abap.blogspot.com/2008/09/salv-model-5-add-header-top-of-page.html
This is has been contributed by one of the SCN contributor Naimesh Patel.
a®

How Do I Use a SINGLE Custom CSS for My Project?

How do I set a single CSS for a project?
Currently, I have linked (I checked, they are actually linked) FM files. The project is Responsive HTML 5 Single Source Layout. It is set up this way:
Project Files
Each FM file has a folder that contains a CSS, an FPJ, any baggage (PNG, for example) and an HTM.
So, for my project, I have 31 such folders.
Above them is RHStyleMapping.css.
That's it
To map my project to a custom CSS, I did this:
1) Created the custom CSS (let's call it TheSingleCSS-sb01.css) and put it in the same location as RHStyleMapping.css.
2) Right-clicked Responsive HTML5 (Primary Layout) in the Single Source Layouts pane.
3) Selected Properties. The Responsive HTML5 Properties dialog box opens.
4) Click Content, select the Apply to all Topics check box, select CSS, and choose my CSS, TheSingleCSS-sb01.css.
5) Click Save and Generate. Generating happens.
6) When prompted, click View Result.
7) Double-click one of the resulting topics, and choose the HTML tab.
8) Notice the following CSS files are referenced, NOT the one I want:
<link rel="stylesheet" href="Configuration_ChangeWorkflow.css" type="text/css" />
<link rel="stylesheet" href="..\..\RHStyleMapping.css" type="text/css" />
<image>
So:
1) How can I replace 32 individual CSSes with one single custom CSS?
2) Also note that Project Manager does not display my custom CSS, even though it is in the same location as RHStyleMapping.css and referenced in the Properties dialog box.
Thanks all,
Sean

Hi, so as I mentioned before, I have used Apply to all and this doesn't work. The resulting HTML still uses a specific CSS for that one HTML file.
1) I put the CSS I want to use, Sean01.css, in the top level of my project using Windows Explorer.
2) I Save and Generate.
3) But, my settings for styles in the CSS are not used. For example, FM_GlossaryDefinition is defined with a 0 left indent but actually uses a 144pt indent (that mirrors the print FM document and that I do not want).
4) And, you can see from the actual HTML, that the Sean01.css file that I applied to all topics (see the first image) is not referenced. What am I doing wrong?
What am I doing wrong? Again, these are imported FM files; this is not linked.
Thanks,
Sean

Change Request Management "There is no task list for this project"

Hello!
I would like to use the functionality of CharM in SOLMAN 4.0.
When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
If I create my own task list via Task list --> create
I get the warning "You cannot change task lists in the SAP namespace"
What are the steps to define task list for my project?
Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
The second warning I get: "NO CTS projects created yet" or
"The Solution Manager project does not have an active CTS project yet".
How can these warnings/errors be corrected?
Thank you very much!
regards

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Change Logs for customer master data in 3.1 H version

Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.

Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K

Mass change Tcode for status of multiple projects

Dear All,
Any SAP Standard t code for mass Status change for multiple Projects
(like TECO,AALK).
Thanks.
Arun

Hi
You dont have this option in any STD SAP t.codes, where you can change the status of the projects/WBSE collectively.
So use this BAPI to Read the status of Project/WBSE
BAPI_BUS2001_GET_STATUS To get both the active system statuses and the user statuses for a project definition
use this BAPI to Change the status of Project/WBSE
BAPI_BUS2001_SET_STATUS
one system status and one user status can be revoked each time, and one system status and one user status can be set each time for a project definition
For Network order status change
BAPI_BUS2002_SET_STATUS
Set/Reset Network Status. At the same time, you can revoke one system status and one user status, or set one system status and one user status in a list of activities for the network.
Thanks
S.Murali
Edited by: S. Murali on Jul 24, 2009 3:43 PM

Change Build Output Filename for SSIS Project

I have a Visual Studio 2010 solution (TxMExtractLoad) with two SSIS projects: TxMExtractLoad.Discovery and TxMExtractLoad.Contract1. The project name (in project properties) is set to the proper two-part name in each project. However, when I
do a "Build", the generated .ispac file loses the second part of the project name: both projects build to "TxMExtractLoad.ispac" (in different directories, fortunately).
I can see where I can change the output *path* for the build, but not the output *filename*.
Any help, anyone?
Thanks in advance...

Came across this post whilst encountering the same issue and thought i would post the solution i discovered
The ispac will get its name from the Name defined in the project properties minus whatever is following the final name part
Therefore, your SSIS package of TxMExtractLoad.Discovery will become TxMExtractLoad.ispac
If you change the name in project properties to something like TxMExtractLoad.Discovery.myProject
or TxMExtractLoad.Discovery..ispac then when you build it it will build as TxMExtractLoad.Discovery.ispac
Hope this helps

How to maintain change history for a custom field

Hi All,
I have added a new custom field in standard table FKKVKP by appending a new structure to FKKVKP. Now this custom field will appear in transaction CAA2. My requirement is I have to maintain change history for my custom field. In transaction SCDO I have seen that there is an object MKK_VKONT that maintains change history for FKKVKP entries. But I am not aware how to adjust this field so that SAP generates change history for my custom field as well.
Thanks in advance,
Venkat

Venkatesh,
DFKKTAXEX
FKKVK
FKKVKP
FKKVK_CORR
I have never used these tables but I have working experience with change docs.
The Z field which you have added should be in the above structures, then you should be able to see that field in the changes.
Of course change document should be set to that field-data element.

Change documents for created for Customer Master

An existing program makes changes to the Customer master table KNA1. The changes are made at the table level using the UPDATE command. Since the changes are being made at table level, the change documents are not created.
I need to create IDocs for all changes. So the question is, how to create change documents for changes to the particular fields being UPDATEd in the report program.
I understand that a BDC program on XD01 screen should have been the best way for this, but I'm here to break-fix and trying to identify solutions with least development effort.

Hi ganadeep,
When an application makes any changes to an object it wrties change documents which are stored in the table CDHDR and CDPOS for each change made.
BDCP table holds the change pointers which point to the change documents in the CDHDR table.
Regards
Parag

Change customer for PS project

Similar Messages

Maybe you are looking for