Change database instance name from XE to something else

Does anyone know how to change the database name during the XE installation?

Just remember, especially if you are coming from the Microsoft SQL Server or the MySQL world ...
One MySQL or SQL Server database is roughly one Oracle Schema. You can have any number of Schemas in an Oracle database. It may not be necessary to have a different database name, or multiple XE databases.

Similar Messages

BAPI to change invoice document status from deleted to something else

Hi experts,
When the document is deleted thorugh MR8M, the invoice status(rbstat) in rbkp table of the invoice doument(MIRO) change to 2 i.e. deleted.
I want to use the same data for parking again by using standard BAPI_INCOMINGINVOICE_GETDETAIL. But v=before that i have to change the status of the document from deleted to something else
Is there any BAPI exist by which i can change the status (rbstat) from deleted to parking or somthing else. i am trying to change it thorugh BAPI_INCOMINGINVOICE_CHANGE , but its not working.
Please help me to find such BAPI
regards
Mudit

Hi Lan,
you can print with SDK using following code :
ReportLayoutsService oReportLayoutService = SBO_Company.GetCompanyService().GetBusinessService(ServiceTypes.ReportLayoutsService);
ReportLayoutPrintParams oReporPrintParams = oReportLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiReportLayoutPrintParams);
ReportParams oReportParam = oReportLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiReportParams);
oReportParam.ReportCode = "QUT1";
DefaultReportParams oReportParaDefault = oReportLayoutService.GetDefaultReport(oReportParam);
oReporPrintParams.LayoutCode = oReportParaDefault.LayoutCode;
oReporPrintParams.DocEntry = 337;
oReportLayoutService.Print(oReporPrintParams);
I tried to print an unprinted document but it didn't change the printed flag at all ( in / active BP ). So unfortunately it doesn't work.
regards,
Maik

Changing database instance name

Hi,
I have oracle database 10g installed on linux.
and now we are aking the databas eto production leve to the www
do we need to change the oracle database name. is there any security reason for it, so outside doesn't need to know from the service name the location of the database. if we have to, then how to do it without affecting any existing processes.
or any other ways to secure the database identity.
any ways to give a alias to the ip address.
any suggestions please.
Thanks,
Philip.

The Oracle documentation contains a lot of security policies. In your case, you should be very cautious about firewall configuration and especially:
If Oracle Database is behind a firewall, then do not, under any circumstances, poke a hole through the firewall. For example, do not leave open port 1521 for Oracle Listener to make a connection to the Internet or vice versa.
Restrict the privileges of the listener, so that it cannot read or write files in the database or the Oracle server address space.
Harden the host operating system by disabling all unnecessary operating system services. Both UNIX and Windows platforms provide a variety of operating system services, most of which are not necessary for most deployments. Such services include FTP, TFTP, TELNET, and so forth. Be sure to close both the UDP and TCP ports for each service that is being disabled. Disabling one type of port and not the other does not make the operating system more secure.
(From http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14266/policies.htm#i1007433)

I bought a new 5c and transferred from an old update from my iPhone 4. The only issue I have is the name of my new phone. How can I change it from Amyiphone4 to something else?

I bought a new 5c and transferred from an old update from my iPhone 4. The only issue I have is the name of my new phone. How can I change it from Amyiphone4 to something else?

settings - general - about - name - make the changes

TS2756 Is there a way to change the name of my hotspot network from iPhone4 to something else?

I want to change the name of my personal hotspot from iPhone4 to something else. Is this possible?

The Personal Hotspot name (SSID) is taken from the name of your phone. So, if you want to change it, change the name of your phone:
Settings>General>About>Name.

Display Database Instance Name in the System Message

Greetings,
I am looking for a way to display the database instance name on each page in the Application Builder. Using the System Message would work for me and I can hard code the instance name, but I was wondering if there is a variable that I can specify that will accomplish the same thing.
Thanks a lot,
Larry

Hi Tony,
I did find that plug-in during my investigation. Some of the plugins sound interesting but I hesitate to anything to the base APEX install since I am not sure if this will affect supportability from Oracle if something goes wrong later on. Do you know if these plug-ins can be installed/deinstalled without affecting the base APEX install? There is also something called ApexLib which looks interesting. Do people use this? Any idea if it is still supported? I checked the forums and noticed there is not much recent activity. I wonder if it has been abandoned.
Hi Ashish,
I do have the application displaying the current environment. I set it up using Page 0 as you suggested. It works great. In fact, I have set up an 'About' page that grabs information from the WWV_FLOWS table which will display information about the current application. Here is my query:
SELECT ALIAS
     , AUTHENTICATION
     , CREATED_BY
     , to_char(CREATED_ON,'mm/dd/yyyy hh24:mi:ss')
     , DATE_FORMAT
     , DISPLAY_ID
     , FLOW_VERSION
     , ID
     , LAST_UPDATED_BY
     , to_char(LAST_UPDATED_ON,'mm/dd/yyyy hh24:mi:ss')
     , NAME
     , OWNER
     , PUBLIC_USER
FROM apex_040000.wwv_flows
where ID = :APP_ID;
select substr(global_name || '.' ,1,instr(global_name || '.' ,'.') -1)
into :P999_DATABASE
from global_name;I use GLOBAL_NAME to get the database SID instead of v$instance so I don't have to grant special privileges on v$instance.
If you find a way to grab the database SID from a query and put it in the System Message field, please let me know. In the interim, I have hard coded this in the System Message field.
<span style="padding:10px 20px 10px 20px; font-weight:bolder ;font-size:1.2em; background:#D96E1C;color:white">Development: TheInstanceName</span>Not exactly what I want, but it will get the job done.
Thanks for all your help,
Larry

How to change the instance name 10.1.3.2

Hi all,
I would like to know how I can change the instance name of a existing application server 10.1.3.2.
Thanks in advance

Take a backup of the complete ORACLE_HOME, reinstall OracleAS 10.1.3.2 and redeploy your applications will work definetely. Saves you wasting your time on something which might be unsupported.

We have an itunes account on our desktop and my kids have it on their ipod and iphone. I went in and changed our user name from my old e-mail address which is no longer accessible to my new one and now either of my kids can access the itunes store..

We have an itunes account on our desktop and both my kids have it on iphone and ipod. I went in and changed out user name from an old e-mail address which is no longer accessible to my one I use now... When the kids try to sign onto the itunes store it tells them they have the wrong user name..
Can this be fixed??

Did you change the email address or create a new Apple ID?
If the email address associated with the account was merely changed, sign out of the Apple ID on the devices and sign in using the new credentials.

How do I change/save the default font in mail from helvetica to something else?

How do I change/save the default font in mail from helvetica to something else?

Mail > Preferences > Fonts & Colors > Messages font:
Click the "Select" button next to "Helvetica 13" textbox.
Select your choice from the window that opens up.

Identical database & instance names in Oracle 11g R2 RAC

Hi ,
     We are migrating our EBS 11i (11.5.10 CU 2) and oracle 11gr2 (11.2.0.3) database (database only) which is currently on Solaris to Linux. Currently the database is NON-RAC and as a part of the migration we are converting it in to a 5 Node RAC. A lot of third party interfaces connected to this environment are using hard coded database name. Unfortunately due to the project time lines it's impossible to change those applications within the migration timeline. In order to ensure that they don't break we are thinking of keeping one instance name same as database name so those applications can continue to function without any change to their code. We are aware that this would compromise on fail over capabilities for those applications but we are ok with that.
This what we have in mind: Create 5 PROD instance named as PROD, PROD1,PROD2, PROD3 & PROD4. PROD being the name of the database also. I would like to know:
1) Is this configuration allowed i.e., is it ok to have one instance with the same name as database?
2) We will be creating a 5 node Data gaurd environment for this so what will be the impact of such a naming on it?
3) Since it's an EBS environment will there be any issues with application configuration?   Our application architecture will be as below:
6 application nodes - Two for concurrent managers, two for forms & web & two external nodes
The two CM app nodes will be tied to two database instances using Services
Remaining app nodes will connect to the remaining 3 instances once again using services.
We will be configuring services using "vip" instead of scan names.
4) What will be the impact if the node having the instance name same as database name goes down?
5) Any other areas to worry about with such a configuration say like cluster services, 3rd partyinterfaces/applications?
Please let me know if you have any idea of such a configuration.
regards
pramod

Brian, rchem & Martin thanks for your responses. Appreciate it much. I was thinking about the service alternative but unfortunately I understand from my customer that their applications have hard coded database (used as a instance name) name. All they are saying is that their applications are using instance name instead of database name without providing much details on how it's being used. I just know that there 180 applications... Oracle & non Oracle based in which the instance name is hard coded, but haven't got answers to my questions on how it's hard coded i.e., is it being pulled from the database using a hard coded query like "select instance_name from v$instance" or is it a part of some variable in the script/application etc., and what it's being used for (later) within the application. Answers to those question will help in deciding what should be the right strategy but since I am short of time I thought of this and wanted to know if anybody has implemented or come across a similar architecture.
I am creating services and using them in my EBS application ifile thereby avoiding SID but agree with you on the node failure part as I haven't tested this new set up yet.
Martin,
          You are right, they are using the database name as a SID in their application hence the above need. My cluster version is 11.2.0.4.0 (both Active & Software versions). The source database on solaris is 11.2.0.3 Non RAC, it's going to be upgraded to 11.2.0.4 before conversion/migration hence I have installed & created a 11.2.04 RAC environment as a part of POC/Load testing.
Regards
pramod

How to change DB & Instance name on RAC

Hi Experts,
Can anyone tell me how can i change my database name along with the two instances running on the RAC server?
Any ideas......
Regards,
MB

You can rename database by creating control file as well , like we use to do in single instance database.
1) Shutdown node 2
2) Run following command on node 1
alter database backup control file to trace ;
3) shutdown database on node 1
4) copy trace file created in step 2 to file crctl.sql (say) . Edit crctl.sql and set database name what u want to set.
5) edit init<sid>.ora and change database name
6) startup nomount and run crctl.sql
7) Startup database in both node
8) Change tnsnames.ora and listener.ora ( if needed)
9) config srvctl
srvctl remove database -d <old_database_name>
srvctl add database -d <new_db_name> -o $ORACLE_HOME
srvctl add instance -d <new_db_name> -i <instance name on node 1> -n Node1
srvctl add instance -d <new_db_name> -i <instance name on node 2> -n Node2
Virag

I just bought a used macbook pro 15 unibody, and would love to know how to change it's name from "previous owner's macbook pro" to "my macbook pro". Any help would be greatly appreciated.

I need to know how to change the macbooks name to reflect new ownership. Thanks.

jeremyfromcanton wrote:
It did not come with the original discs, and I bought it for the fact that it came with certain programs already on it. I do have the snow leopard os disc I bought to update my older macbook, but don't want to lose those programs which I bought it for.
Then you need to obtain them from the seller. It is illegal (according to Apple) to sell Macs without the system discs that came with it.
You can get replacement System Discs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those -
http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
Mac OS X 10.6 Help: If you forget your administrator password

Trouble referencing instance name from different frame

Newbie here. All my code is in frame 1 and is working fine except for one onRelease event. In frame 20 (labeled "gameOver") there is a button which has an instance name of btnQuit. I want that button to do something onRelease. The code works fine if I put it inside the button like so: on (release) {......etc. But I would like to have all my code in frame 1 in a timeline called "scripts".
I think I'm missing something to reference the button's instance name (maybe a "_root", or "this", or some of those things that I don't fully understand).
Here's the code that works when put in frame 20 inside the button, but not in frame 1 in a different timeline:
btnQuit.onRelease = function () {
// Calculate elapsed time
var now = new Date()
var elapsedTime = now - startTime; // startTime set beforehand
var strTime:String = Math.floor(elapsedTime / (1000 * 60 * 60)) + ":" +
   (Math.floor(elapsedTime / (1000 * 60)) % 60) + ":" +
   (Math.floor(elapsedTime / (1000)) % 60);
// Send data to PHP
dataOut = new LoadVars();
if ( finalScore > 89 ) {
    dataOut.passed = '1';
} else {
    dataOut.passed = '0';
dataOut.score = finalScore;
dataOut.time_spent = strTime;
dataOut.send("lesson.php","_self","POST");

The button has to be in the presence of the code when the code is executed. So you either need to have that button in frame 1 or have that code in frame 20. You could have it in frame 1 and turn it invisible until frame 20 if that is an option.

How to get the instance name from the SWFLoader?

Hi Guys,
I am new to Flex. i need help from u.
i load the swf file through the SWFLoader in Flex 3.
Than how to get the instace(button,text,etc.,) of the loaded
swf.
Please help me.

Yes. hashcode is not absolutely unique. I know this.
I had took this idea into my consideration. But it failed finally.
Thanks
To JN_.
Maybe I still have some misunderstood descripte my question.
neither the name not an "instance name" nor an "object name".
So now, I really do not know how to call this.
Can you tell me? Then I will not make the same fault next time.
thanks.

ODI10g - How to Change ODI Instance colour from Green to Yellow (Warning) on business error

Hi,
We have requirement where we have to change ODI instace colur from green to yellow( we have to show warning) if any records move into error table. Is it possible to change ODI instance from Green sign to Yellow? If yes, how?
We are using ODI10g.
Thanks in Advance

In 11g if the session populated error records in E$ tables then the session status is changed to warning (Yellow icon).
Not sure of 10g though. If I remember correctly it used to pick the last task's status. You can check that otherwise it is not directly possible unless directly tweak with ODI repository tables.

Change database instance name from XE to something else

Similar Messages

Maybe you are looking for