Change datatype for field of report
I have a report that uses a Stored procedure for a datasource - it originally had to fields that were "number" as the field datatype and took an integer from the Sp.
I've since changed the datatype for that field from int to smallmoney. How can i refresh these links for the report without deleting the data source and loosing the report as it is now. The names stayed the same. Only the data type for two fields changed from int to smallmoney.
Thank you!!
Harry
use set data source location and update the conection
regards,
Raghavendra
Similar Messages
-
Change Require For Field Description
Guru
Our Clint requires the change Require For Field Description how to do it
pl guide me
Thanks
Sudhiruse set data source location and update the conection
regards,
Raghavendra -
ABAP Dump while Changing the Layout fields in Report output - RCOPCA02
Hi,
I Copied the Standard Program RCOPCA02 to ZRCOPCA02. I added two new fields(AUART, AUGRU) in the report output. It is executing correctly with default layout, While Changing the layout for displaying new fields it is dumping.
I am not understanding, What should i do...
Here is the Code.
report ZRCOPCA02 no standard page heading message-id km
line-count (2) line-size 81.
type-pools: slis, ecarc.
DDIC-Tabellen *******************************************************
tables: glpca, "Einzelposten / Ist
glu1, "Übergabestruktur FI-SL-Anzeige
t000,
tka01,
sscrfields,
vbak.
Variablen und int. Tabellen *****************************************
data: l_vbeln like vbak-vbeln,
l_auart like vbak-auart,
l_augru like vbak-augru.
data: afield type slis_fieldcat_alv,
sp_group type slis_sp_group_alv,
t_listheader type slis_t_listheader with header line,
t_layout type slis_layout_alv,
t_fieldcat type slis_t_fieldcat_alv,
t_spec_groups type slis_t_sp_group_alv,
event type slis_alv_event,
t_events type slis_t_event,
g_variant like disvariant,
gx_variant like disvariant,
g_exit(1) type c,
g_save(1) type c,
g_repid like sy-repid,
msgtyp like sy-msgty,
lt_dynpread like dynpread occurs 1 with header line,
ls_rpcak like rpcak, "note 0310592
packsize type i value 1000,
text1(60) type c,
text2(60) type c,
oldkokrs like glpca-kokrs,
oldracct like glpca-racct.
data: whr_size type i value 50,"Maximum of single values per MIC 46a
"charact. in the where-clause of the select-statement
lines type i, "number of lines of range table MIC 46a
cnt_rldnr type i, "Zähler Anzahl selektierter Ledger
cnt_kokrs type i, "Zähler Anzahl selektierter KoReKreise
cnt_poper type i, "Zähler Anzahl selektierter Perioden
cnt_ryear type i, "Zähler Anzahl selektierter GeschJahre
cnt_rvers type i, "Zähler Anzahl selektierter Versionen
cnt_bukrs type i, "Zähler Anzahl selektierter BuKreise
empge like dkobr-empge,
ksl_curr like tka01-pcacur,
hsl_curr like t001-waers,
a_rec like rstirec.
data: begin of dim_data.
include structure rgcdi. "data for dimensions
data: end of dim_data.
data: begin of tab_fields occurs 80,
name like dntab-fieldname, "fields in table i_glpca
end of tab_fields.
data: begin of i_glpca occurs 0.
include structure rpca2.
data: racct_ktext like rpcak-ktext,
psppp like prps-posid,
v_auart like vbak-auart,
v_augru like vbak-augru,
end of i_glpca.
data: rw_subrc like sy-subrc, "Flag: Report-Writer-Schnittstelle
re_subrc like sy-subrc, "Flag: Recherche-Schnittstelle
subrc like sy-subrc.
data: set_id like sethier-setid, "Set-ID "RDI_SETS_4.0
set_class like sethier-setclass, "Setklasse "RDI_SETS_4.0
set_sname like sethier-shortname."Setname (24) "RDI_SETS_4.0
data: authorised(1),
s_message(1),
auth_dbcount like sy-tabix,
Hex-Konstanten für Minimum/Maximum-Werte
begin of hex00,
x1(12) type c,
x2(12) type c,
end of hex00,
begin of hexff,
x1(12) type c,
x2(12) type c,
end of hexff.
ranges rclnt for glpca-rclnt.
field-symbols: type ecarc_glpca_curr.
Selektionsoptionen *************************************************
select-options:
rldnr for glpca-rldnr default '8A' no-display,
rassc for glpca-rassc no-display,
rrcty for glpca-rrcty default 0,
rrcty for glpca-rrcty,
rvers for glpca-rvers default '000',
kokrs for glpca-kokrs memory id cac,
bukrs for glpca-rbukrs memory id buk,
poper for glpca-poper default sy-datlo+4(2),
ryear for glpca-ryear default sy-datlo,
poper for glpca-poper,
ryear for glpca-ryear,
prctr for glpca-rprctr matchcode object prct,
pprctr for glpca-sprctr matchcode object prct,
RACCT FOR GLPCA-RACCT MATCHCODE OBJECT KART, "RD_P30K128304
racct for glpca-racct, "RD_P30K128304
drcrk for glpca-drcrk,
activ for glpca-activ,
rhoart for glpca-rhoart,
rfarea for glpca-rfarea,
stagr for glpca-stagr,
rtcur for glpca-rtcur,
runit for glpca-runit,
versa for glpca-versa no-display,
eprctr for glpca-eprctr no-display,
afabe for glpca-afabe no-display,
rmvct for glpca-rmvct no-display,
hrkft for glpca-hrkft no-display, "note 550972
sbukrs for glpca-sbukrs no-display, "note 550972
shoart for glpca-shoart no-display, "note 550972
sfarea for glpca-sfarea no-display, "note 550972
docct for glpca-docct,
docnr for glpca-docnr,
refdocct for glpca-refdocct,
refdocnr for glpca-refdocnr,
werks for glpca-werks,
repmatnr for glpca-rep_matnr matchcode object pca_shlp_rep_matnr,
rscope for glpca-rscope.
parameters: no_rrint no-display default ' '." skip "MICP40K066037
" report-report-interface
display variant ">>MICP40K039857
selection-screen begin of block 0 with frame title text-e01.
parameters: p_vari like disvariant-variant.
selection-screen comment 47(40) varname for field p_vari.
selection-screen end of block 0.
parameters log_grp(4) type c no-display default 'KE5Z'.
"<<MICP40K039857
ranges: v_racct for glpca-racct,
v_prctr for glpca-rprctr,
v_pprctr for glpca-sprctr.
Tabelle mit Werten aus den Berichts-Set vom Report-Writer *
data begin of val_tab occurs 50.
include structure rgciv.
data end of val_tab.
MICP30K166368
feldkatalog und interface für bb-schnittstelle rw MICP30K166368
MICP30K166368
"MICP30K166368
data begin of bbs_fieldtab occurs 20. "MICP30K166368
include structure rstifields. "MICP30K166368
data end of bbs_fieldtab. "MICP30K166368
archiv
type-pools: rsds.
types: begin of ty_archive_objects,
object like arch_obj-object,
end of ty_archive_objects,
ty_t_archive_objects type ty_archive_objects occurs 2.
constants: lc_set type c value 'X',
lc_report type progname value 'KE5Z',
lc_reporttype type reporttype value 'TR'.
tables: admi_files.
select-options lr_files for admi_files-archiv_key no-display.
parameter: read_db type c default 'X' no-display,
read_ar type c no-display,
arc_obj like arch_obj-object no-display,
read_as type c default 'X' no-display.
data : lt_arch_obj type ty_t_archive_objects with header line,
ls_selections type rsds_frange,
lt_selections type rsds_frange_t,
ls_selopt type rsdsselopt,
lt_glpca_archiv type ecarc_t_glpca_curr.
*********************************************************>>MICP40K039857
INITIALIZATION
initialization.
Diverse Initialisierungen
perform init_vars.
g_repid = sy-repid.
Set default values for record type
rrcty-sign = 'I'.
rrcty-option = 'EQ'.
rrcty-low = '0'.
append rrcty.
rrcty-low = '2'.
append rrcty.
Set default values for period and year (if kokrs or bukrs is known)
get parameter id 'BUK' field bukrs-low.
get parameter id 'CAC' field kokrs-low.
if kokrs-low is initial "get contr. area from company code
and not bukrs-low is initial.
call function 'KOKRS_GET_FROM_BUKRS'
exporting
i_bukrs = bukrs-low
importing
e_kokrs = kokrs-low
exceptions
no_kokrs_found = 1
others = 2.
if sy-subrc <> 0.
clear kokrs-low.
endif.
endif.
if not kokrs-low is initial.
call function 'K_KOKRS_READ' "get fiscal year variant
exporting
kokrs = kokrs-low
importing
e_tka01 = tka01
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
call function 'G_PERIOD_GET'
exporting
date = sy-datlo
variant = tka01-lmona
importing
period = poper-low
year = ryear-low
exceptions
ledger_not_assigned_to_company = 1
period_not_defined = 2
variant_not_defined = 3
others = 4.
if sy-subrc = 0.
poper-sign = 'I'.
poper-option = 'EQ'.
append poper.
ryear-sign = 'I'.
ryear-option = 'EQ'.
append ryear.
endif.
endif.
endif.
Settings for display variants
g_save = 'A'. "Schalter Varianten benutz./allg. speichern
clear g_variant.
g_variant-report = g_repid.
g_variant-log_group = log_grp.
g_variant-username = sy-uname.
Get default variant
gx_variant = g_variant.
call function 'REUSE_ALV_VARIANT_DEFAULT_GET'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 2.
if sy-subrc = 0.
p_vari = gx_variant-variant.
endif.
Set variant
if p_vari is initial.
p_vari = '1SAP'.
move p_vari to gx_variant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = g_save
changing
cs_variant = gx_variant
exceptions
not_found = 1.
if sy-subrc ne 0.
clear p_vari.
clear gx_variant-variant.
endif.
endif.
varname = gx_variant-text.
"<<MICP40K039857
archiv
call function 'KARL_DATA_INPUT_INIT'
exporting
i_report = lc_report
i_reporttype = lc_reporttype
importing
e_xusedb = read_db
e_xusear = read_ar
e_archobj = arc_obj
e_infosys = read_as
tables
t_arch_sel = lr_files.
data: lt_excluding like sy-ucomm occurs 0 with header line.
call function 'RS_SET_SELSCREEN_STATUS'
exporting
p_status = 'SELSCREEN'
p_program = 'RCOPCA02'
tables
p_exclude = lt_excluding.
Initialisieren der Bericht/Bericht-Schnittstellen *
data: ld_no_rrint type boole_d. "note 490484 begin
import rri = ld_no_rrint from memory id 'RCOPCA02_NO_RRI'.
if ld_no_rrint = 'X'.
free memory id 'RCOPCA02_NO_RRI'.
else. "note 490484 end
call function 'G_REPORT_INTERFACE_INIT' "Report-Writer?
exporting "MICP30K166368
table = 'GLPCT' "MICP30K166368
importing
subrc = rw_subrc "MICP30K166368
tables "MICP30K166368
it_fieldr = bbs_fieldtab. "MICP30K166368
call function 'RSTI_APPL_STACK_POP'"oder Recherche?
importing
i_rec = a_rec
exceptions
appl_stack_not_initialized = 1.
re_subrc = sy-subrc.
if re_subrc = 0.
check Receiver is this report
if not ( ( a_rec-rtool = 'RT' and a_rec-ronam = 'RCOPCA02' )
or ( a_rec-rtool = 'TR' and a_rec-ronam = 'KE5Z' ) ) .
re_subrc = 2.
endif.
endif.
endif.
AT SELCTION-SCREEN on value request**********************************
*at selection-screen on value-request for racct-low. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-low. "RD "4.6a
"RD "4.6a
"RD "4.6a
*at selection-screen on value-request for racct-high. "RD "4.6a
"RD "4.6a
call function 'K_RACCT_VALUE_REQUEST' "RD "4.6a
importing "RD "4.6a
e_racct = racct-high. "RD "4.6a
at selection-screen on value-request for p_vari. "MICP40K039857
perform f4_for_variant. "MICP40K039857
at selection-screen on value-request for poper-low. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-low "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
at selection-screen on value-request for poper-high. "RD "4.6a
begin of insertion note 522715
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc = 0.
end of insertion note 522715
call function 'ECPCA_RPMAX_VALUE_REQUEST' "RD "4.6a
exporting "RD "4.6a
i_kokrs = kokrs-low "RD "4.6a
i_ryear = ryear-low "RD "4.6a
importing "RD "4.6a
e_rpmax = poper-high "RD "4.6a
begin of insertion note 522715
exceptions
table_empty = 1.
endif.
end of insertion note 522715
AT SELCTION-SCREEN ***************************************************
at selection-screen.
perform pai_of_selection_screen.
begin of insertion note 522715
if not kokrs-low is initial.
call function 'K_KOKRS_READ'
exporting
kokrs = kokrs-low
exceptions
not_found = 1
not_found_gjahr = 2
others = 3.
if sy-subrc <> 0.
message e101(ki) with kokrs-low.
endif.
endif.
end of insertion note 522715
archiv
if sy-ucomm = 'FC01' or sy-ucomm = 'UCDS'
or sy-ucomm = 'ONLI' and read_ar = 'X'
and read_as is initial and lr_files[] is initial.
if lt_arch_obj[] is initial.
lt_arch_obj-object = 'PCA_OBJECT'. append lt_arch_obj.
lt_arch_obj-object = 'EC_PCA_ITM'. append lt_arch_obj.
endif.
call function 'KARL_DATA_INPUT_SELECT'
exporting
i_db_and_arc = lc_set
i_infosys_possible = lc_set
i_object_fixed = 'V'
i_documentation = 'KARL_DATA_INPUT_SEL_KE5YZ'
i_report = lc_report
i_reporttype = lc_reporttype
tables
t_objects = lt_arch_obj
t_arch_sel = lr_files
changing
c_xusedb = read_db
c_xusear = read_ar
c_archobj = arc_obj
c_infosys = read_as.
endif.
START-OF-SELECTION **************************************************
start-of-selection.
Default-Werte löschen, falls Aufruf über Recherche
oder Report-Writer erfolgt ist
if no_rrint is initial and ld_no_rrint is initial. "note 490484
if rw_subrc eq 0 or re_subrc eq 0.
refresh: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
clear: rldnr, rrcty, rvers, kokrs, bukrs, poper, ryear,
racct, prctr, pprctr, drcrk, activ, rhoart, rfarea,
versa, afabe, eprctr,
v_racct, v_prctr, v_pprctr.
endif.
Parameter einlesen über Report-Writer-Schnittstelle *
if rw_subrc eq 0.
perform rw_get_parameters.
oder Parameter einlesen über Recherche-Schnittstelle *
elseif re_subrc eq 0.
perform re_get_parameters.
endif.
endif.
if read_db = 'X'. " read from DB (archiv)
Bewegungsdaten einlesen und puffern...................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten selektieren'(p10).
Use dirty trick to mislead DB-optimizer
call function 'DB_DO_NOT_USE_CLIENT_INDEX'
exporting
value = sy-mandt
tables
mandttab = rclnt.
select (tab_fields) from glpca
client specified
package size packsize
APPENDING CORRESPONDING FIELDS OF TABLE i_glpcaO
into corresponding fields of table i_glpca
where rldnr in rldnr
and rrcty in rrcty
and rvers in rvers
and kokrs in kokrs
and rbukrs in bukrs
and ryear in ryear
and rassc in rassc
and hrkft in hrkft "note 550972
and sbukrs in sbukrs "note 550972
and shoart in shoart "note 550972
and sfarea in sfarea "note 550972
and racct in racct
and rprctr in prctr
and sprctr in pprctr
and poper in poper
and drcrk in drcrk
and activ in activ
and rhoart in rhoart
and rfarea in rfarea
and versa in versa
and eprctr in eprctr
and afabe in afabe
and rmvct in rmvct
and docct in docct
and docnr in docnr
and stagr in stagr
and rtcur in rtcur
and runit in runit
and refdocct in refdocct
and refdocnr in refdocnr
and werks in werks
and rep_matnr in repmatnr "RDIP40K020663
and rscope in rscope "RDIP40K020663
and rclnt in rclnt. "dirty trick to mislead DB-optimizer
if sy-dbcnt > 1.
text1 = sy-dbcnt.
condense text1.
concatenate text1 text-m01 into text2 separated by space.
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = text2. " ... Datensätze gelesen
endif.
endselect.
Entfernt nicht zugehörige Einträge....................................
loop at i_glpca where ( not rprctr in v_prctr )
or ( not sprctr in v_pprctr )
or ( not racct in v_racct ).
delete i_glpca.
endloop.
endif.
*archiv
if read_ar = 'X' and not
( read_as is initial and lr_files[] is initial ).
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Lesen im Archiv'(p12).
define fill_lt_selections.
if not &2[] is initial.
clear ls_selections.
move &1 to ls_selections-fieldname.
loop at &2.
clear ls_selopt.
move-corresponding &2 to ls_selopt.
append ls_selopt to ls_selections-selopt_t.
endloop.
append ls_selections to lt_selections.
endif.
end-of-definition.
fill_lt_selections 'RLDNR' rldnr.
fill_lt_selections 'RRCTY' rrcty.
fill_lt_selections 'RVERS' rvers.
fill_lt_selections 'KOKRS' kokrs.
fill_lt_selections 'RBUKRS' bukrs.
fill_lt_selections 'POPER' poper.
fill_lt_selections 'RYEAR' ryear.
fill_lt_selections 'RPRCTR' prctr.
fill_lt_selections 'SPRCTR' pprctr.
fill_lt_selections 'RACCT' racct.
fill_lt_selections 'DRCRK' drcrk.
fill_lt_selections 'ACTIV' activ.
fill_lt_selections 'RHOART' rhoart.
fill_lt_selections 'RFAREA' rfarea. "note 401961
fill_lt_selections 'STAGR' stagr.
fill_lt_selections 'RTCUR' rtcur.
fill_lt_selections 'RUNIT' runit.
fill_lt_selections 'VERSA' versa.
fill_lt_selections 'EPRCTR' eprctr.
fill_lt_selections 'AFABE' afabe.
fill_lt_selections 'RMVCT' rmvct.
fill_lt_selections 'DOCCT' docct.
fill_lt_selections 'DOCNR' docnr.
fill_lt_selections 'REFDOCCT' refdocct.
fill_lt_selections 'REFDOCNR' refdocnr.
fill_lt_selections 'WERKS' werks.
fill_lt_selections 'REP_MATNR' repmatnr.
fill_lt_selections 'RSCOPE' rscope.
fill_lt_selections 'HRKFT' hrkft. "note 550972
fill_lt_selections 'SBUKRS' sbukrs. "note 550972
fill_lt_selections 'SHOART' shoart. "note 550972
fill_lt_selections 'SFAREA' sfarea. "note 550972
call function 'EC_PCA_SELECT_FROM_ARCHIVE'
exporting
i_selections = lt_selections[]
i_files_sequential_read = lr_files[]
importing
e_glpca = lt_glpca_archiv[]
exceptions
no_infostruc_found = 1.
if sy-subrc = 1.
message id sy-msgid type 'I' number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_glpca.
loop at lt_glpca_archiv assigning to i_glpca.
append i_glpca.
endloop.
endif.
if i_glpca[] is initial. "Info,nichts gefunden
message s000.
exit.
endif.
get texts for accounts ...............................................
sort i_glpca by kokrs racct.
loop at i_glpca assigning -racct_ktext = ls_rpcak-ktext.
endloop.
Liste mit Einzelposten geeignet sortieren.............................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten sortieren'(p30).
if show_ref is initial.
sort i_glpca by rldnr ryear rbukrs rrcty rvers
docct docnr docln.
else.
sort i_glpca by rldnr kokrs ryear rbukrs rrcty rvers poper
refdocct refdocnr refdocln.
endif.
Berechtigungsprüfung und gemerkte Belege aufbereiten .................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Berechtigungsprüfungen'(p40).
clear: cnt_rldnr, cnt_kokrs, cnt_ryear, cnt_rvers, cnt_bukrs.
loop at i_glpca assigning .
Berechtigungscheck
perform check_repo_authority changing authorised.
if authorised is initial.
delete i_glpca.
s_message = 'X'.
zählen der Sätze ohne Berechtigung
auth_dbcount = auth_dbcount + 1.
else. "Weitere Bearbeitung nur für berechtigte Belege...
Zusätzlich merken der Anzahl der Ausprägungen
bestimmter Dimensionen
on change of -rbukrs
ct = '10'
importing
currency = hsl_curr.
endon.
externe Immobilienbezeichnung "ww/kb
on change of i_glpca-imkey.
if ( not -dabrz
I_length = 20
importing
e_empge = -konty.
endif.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endif.
endon.
on change of i_glpca-dabrz.
call function 'REMD_IMKEY_TO_EMPGE'
exporting
i_imkey = i_glpca-imkey
i_dabrz = i_glpca-dabrz
i_length = 20
importing
e_empge = i_glpca-empge
e_konty = i_glpca-konty.
CONCATENATE I_GLPCA-KONTY I_GLPCA-EMPGE INTO I_GLPCA-IMBEZ.
endon.
Konvertierungsproblem mit PSP-Nummer bereinigen
if not -psppp.
endif.
endif.
Währungen in Hilfsfeldern speichern
if -ksl_curr = ksl_curr.
endif.
modify i_glpca.
endif.
endloop.
Nachricht, wenn nicht alle Einzelposten angezeigt werden.
if not s_message is initial.
message s407(km) with auth_dbcount.
endif.
EP ausgeben...........................................................
call function 'SAPGUI_PROGRESS_INDICATOR'
exporting
text = 'Einzelposten ausgeben'(p50).
t_layout-detail_initial_lines = 'X'.
t_layout-detail_popup = 'X'.
t_layout-f2code = 'PIC1'. "MICP40K039857
t_layout-get_selinfos = 'X'.
t_layout-group_change_edit = 'X'. "note 576149
perform fill_listheader.
perform fieldcat_fill.
perform spec_groups_fill.
perform events_fill. "MICP40K039857
">>MICP40K039857
call function 'K_KKB_LIST_DISPLAY'
exporting
i_callback_program = 'RCOPCA02'
i_callback_user_command = 'USR_CMD'
i_callback_top_of_page = 'TOP_OF_PAGE'
I_CALLBACK_END_OF_PAGE =
I_CALLBACK_END_OF_LIST =
i_callback_pf_status_set = 'SET_PF_STATUS'
I_CALLBACK_LAYOUT_SAVE =
I_CALLBACK_FIELDCAT_SAVE =
i_tabname = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
I_FCTYPE = 'R'
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
tables
t_outtab = i_glpca
exceptions
others = 1.
loop at i_glpca.
select single vbeln auart augru
into (l_vbeln, l_auart, l_augru)
from vbak where vbeln = i_glpca-aubel.
if sy-subrc = 0.
move l_auart to i_glpca-v_auart.
move l_augru to i_glpca-v_augru.
modify i_glpca.
endif.
endloop.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
exporting
I_INTERFACE_CHECK = ' '
i_callback_program = 'ZRCOPCA02'
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USR_CMD'
i_structure_name = 'I_GLPCA'
is_layout = t_layout
it_fieldcat = t_fieldcat
IT_EXCLUDING =
it_special_groups = t_spec_groups
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = g_save
is_variant = g_variant
it_events = t_events
IT_EVENT_EXIT =
IS_PRINT =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = i_glpca
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
"<<MICP40K039857
clear i_glpca.
*& Form CHECK_REPO_AUTHORITY
Check only new auth-object K_PCA *
--> p1 text
<-- p2 text
form check_repo_authority changing authorized like authorised.
fill structure for userexit in K_PCA_RESP_AUTHORITY_CHECK
data: auth like pca_i_auth. "46a MIC check K_PCA and G_GLTP
auth-bukrs = -rrcty.
clear authorized.
check PrCtr/account/activity
call function 'K_PCA_RESP_AUTHORITY_CHECK'
exporting
i_kokrs = -racct
i_vorgn = 'REPP'
i_actvt = '28'
i_auth = auth
i_no_dialog_message = 'X'
exceptions
no_authority = 1
data_missing = 2
others = 3.
if sy-subrc = 0. "ok
check ledger/version/record type
call function 'PCA_G_GLTP_AUTH_CHECK'
exporting
rldnr = -rrcty
exceptions
no_authorisation = 1
others = 2.
if sy-subrc = 0. "ok, User is authorized
authorized = 'X'.
endif.
endif.
endform. " CHECK_REPO_AUTHORITY
*& Form INIT_VARS
Initialisieren diverser Hilfsvariablen und -tabellen *
form init_vars.
data begin of nametab occurs 80. "Tabelle mit Feldern aus der RPCA2
include structure dntab.
data end of nametab.
select single * from t000
client specified
where mandt = sy-mandt.
refresh nametab.
call function 'NAMETAB_GET'
exporting
only = 'T'
tabname = 'RPCA2'
tables
nametab = nametab.
Übernehmen der Feldnamen, die auch in der GLPCA
vorkommen.
loop at nametab where fieldname ne 'KSL_CURR'
and fieldname ne 'HSL_CURR'
and fieldname ne 'EMPGE' "ww/kb
and fieldname ne 'KONTY'. "ww/kb
move nametab-fieldname to tab_fields-name.
append tab_fields.
endloop.
fill Fields of receiver for BBS "MIC46C
call function 'RSTI_REPORT_FIELDS_FIND'
exporting
e_repid = 'RCOPCA02'
e_type = 'R'
tables
it_fields = bbs_fieldtab.
correct fieldnames
read table bbs_fieldtab with key rfield = 'PRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'PPRCTR'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'SPRCTR'.
modify bbs_fieldtab index sy-tabix.
endif.
read table bbs_fieldtab with key rfield = 'BUKRS'.
if sy-subrc = 0.
bbs_fieldtab-rfield = 'RBUKRS'.
modify bbs_fieldtab index sy-tabix.
endif.
Unicode
class cl_abap_char_utilities definition load.
clear hex00 with cl_abap_char_utilities=>minchar.
clear hexff with cl_abap_char_utilities=>maxchar.
endform. " INIT_VARS
FORM FILL_LISTHEADER *
List-Header in Abhängigkeit der selektierten Daten *
form fill_listheader.
read table i_glpca index 1.
if sy-subrc ne 0.
exit.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Ledger '(h01).
if cnt_rldnr <= 1.
t_listheader-info = i_glpca-rldnr.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Kostenrechnungskreis'(h02).
if cnt_kokrs <= 1.
t_listheader-info = i_glpca-kokrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungskreis '(h03).
if cnt_bukrs <= 1.
t_listheader-info = i_glpca-rbukrs.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
t_listheader-typ = 'S'.
t_listheader-key = 'Buchungsperiode '(h04).
if cnt_poper <= 1.
t_listheader-info = i_glpca-poper.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
if cnt_ryear <= 1.
t_listheader-typ = 'S'.
t_listheader-key = 'Geschäftsjahr '(h05).
t_listheader-info = i_glpca-ryear.
append t_listheader.
endif.
t_listheader-typ = 'S'.
t_listheader-key = 'Version '(h06).
if cnt_rvers <= 1.
t_listheader-info = i_glpca-rvers.
else.
t_listheader-info = '*'.
endif.
append t_listheader.
endform. "fill_listheader
*& Form FIELDCAT_FILL
*& Aufbau des Feldkataloges für den K_KKB_LIST_DISPLAY, *
*& bzw REUSE_ALV_LIST_DISPLAY, *
*& weitere Infos enthält die FktBaustein-Doku *
form fieldcat_fill.
data: i type i value 0.
refresh t_fieldcat.
Ledger
if cnt_rldnr > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RLDNR'.
afield-no_sum = 'X'.
afield-no_out = 'X'.
afield-key = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Satzart
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RRCTY'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
Version
if cnt_rvers > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RVERS'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Periode
if cnt_poper > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'POPER'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Geschäftsjahr
if cnt_ryear > 1.
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'RYEAR'.
afield-no_sum = 'X'.
afield-ref_tabname = 'GLPCA'.
afield-no_out = 'X'.
afield-sp_group = '1'.
append afield to t_fieldcat.
endif.
Referenzbelegtyp
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCCT'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Typ'(t01).
afield-seltext_m = 'Belegtyp'(t02).
afield-seltext_l = 'Ref.Belegtyp'(t03).
afield-outputlen = 3. "Platz für die Sterne der Zwischensummen
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
append afield to t_fieldcat.
Referenzbelegnummer
add 1 to i.
clear afield.
afield-col_pos = i.
afield-fieldname = 'REFDOCNR'.
afield-ref_tabname = 'GLPCA'.
afield-key_sel = 'X'.
afield-no_sum = 'X'.
afield-sp_group = '2'.
afield-seltext_s = 'Refbeleg'(t04).
afield-seltext_m = 'Refbelegnr'(t05).
afield-seltext_l = 'Ref.Belegnummer'(t06).
if not show_ref is initial.
afield-key = 'X'.
else.
afield-no_out = 'X'.
endif.
appendHi Prabhu,
You are right, problem is with Field Catalog...
When I use FM 'REUSE_ALV_GRID_DISPLAY' it is dumping...
When i tried with FM 'REUSE_ALV_LIST_DISPLAY' it is working perfectly....
how can i use FM 'REUSE_ALV_GRID_DISPLAY' without dumping????
do i need to pass any thing in FM????
Here is the dump:
Runtime Errors MESSAGE_TYPE_X
Occurred on 12/21/2006 at 01:03:24
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Technical information about the message:
Message classe...... "0K "
Number.............. 000
User, transaction...
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLSLVC "
Screen.............. "SAPLSLVC_FULLSCREEN 0500"
Screen line......... 3
Information on where termination occurred
The termination occurred in the ABAP program "SAPLSLVC " in "LINE_OUT_NEW_2".
The main program was "ZRCOPCA02 ".
The termination occurred in line 918 of the source code of the (Include)
program "LSLVCF01 "
of the source code of program "LSLVCF01 " (when calling the editor 9180).
Source code extract
008880 gs_roid-row_id = rs_row-index * -1.
008890 endif.
008900 gs_roid-sub_row_id = rs_row-rowtype+7(10).
008910 gs_poid-row_id = gs_roid-row_id.
008920 gs_poid-sub_row_id = gs_roid-sub_row_id.
008930 gs_poid-rowtype = rs_row-rowtype.
008940 gs_poid-index = rs_row-index.
008950 insert gs_poid into table rt_poid.
008960 endif.
008970 append gs_roid to rt_roid.
008980
008990 loop at rt_fieldcat assigning <ls_fieldcat> where tech ne 'X' and
009000 no_out ne 'X'.
009010
009020 if gflg_invisible = 'X'.
009030 if <ls_fieldcat>-do_sum is initial.
009040 clear gflg_invisible.
009050 continue.
009060 else.
009070 clear g_col_counter.
009080 clear gflg_invisible.
009090 endif.
009100 endif.
009110
009120 clear gs_lvc_data.
009130 clear g_style.
009140
009150 assign component
009160 <ls_fieldcat>-fieldname of structure rt_data to <g_field>.
009170 if sy-subrc ne 0.
> message x000(0k).
009190 endif.
009200
009210 g_col_counter = g_col_counter + 1.
009220
009230 gs_lvc_data-row_pos = r_row_counter.
009240 gs_lvc_data-col_pos = g_col_counter.
009250 gs_lvc_data-row_id = gs_roid-row_id.
009260 gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009270
009280 * Endtotal and average
009290 if rs_row-rowtype(1) ca 'T' and <ls_fieldcat>-do_sum = 'C'.
009300 * save the actual grouplevel information
009310 gs_grouplevels = rs_grouplevels.
009320 clear g_lines.
009330
009340 * get number of lines of the collect table
009350 describe table rt_data lines g_lines.
009360 * if there is only one line or the field has no references so
009370 * that only the first line has to be considered
Thanks,
fractal
null -
How to get change log for fields if change document flag is not maintained?
Hi experts,
My requirement is display the change log details for the transaction FAGLGA32.
In this transaction we have the Field Groups block.if any change is happened for field group we need to capture the change.
the field for the field group is RKAL1-FGFLG1 and the data element is FGFLG.
In the data element FGFLG, the flag CHANGE DOCUMENT is not maintained.
How to get the change log details for the fields for which the change document flag is not maintained at data element level?
Regards,
Rameshdo a modification for the data element or try Audit Trail (depends on your release)
Audit Trail (electronic records) / Tx AUT10, AUT01, XX-PROJ-ELR, OSS 564743,517613,564645
Note 1058984 - FAQ: Audit Trail (Transactions AUT01-AUT10)
http://help.sap.com/erp2005_ehp_03/helpdata/DE/fc/89683c1b5fb712e10000000a114084/frameset.htm
cheers
carsten -
Change runtime for a specific report
Hi All,
I was wondering if it's possible to change the runtime limit for a specific report in SAP. So for example if the general runtime limit is set to 20 mins, can I change this to 45 mins for one specific report?
Thanks.
Manu.Hi,
I dont think it is possible to change the runtime for a single report. By runtime, i mean runtime in foreground.
It is a BASIS setting and will be allied to ALL reports.
Contact your BASIS admin for further clarifications.
Regards,
Shashank -
Unable to change language for SAP BW Report Iview
Dear all
We are currently rolling out BW Web Templates can be displayed in both EN and MS languages. The language can be changed via the URL that we display, e.g.
For English Language:
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=EN&cmd=ldoc&template_id=ZTEST
For Malay Language :
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=7&cmd=ldoc&template_id=ZTEST
We have published these templates into Ent. Portal 6 using SAP BW Report Iview, but unfortunately we cannot view the report in the Malay language (SAP-LANGUAGE=7), even though we have inserted the command SAP-LANGUAGE=7 in the SAP BW Report Iview query string. All the reports, although defaulted to SAP-LANGUAGE=7 displays in English. We also tried to set the language settings for the Iview, but there are no language 7 or MS in the Iview. It can only be defaulted to the Portals language, which is English.
Note that the reports can be viewed in the different languages if we using the URL separately outside of Portal, and also within BW Bex Analyzer itself. Only the Portal doesnt allow us to view the reports in MS language.
Can someone help us on this matter? All helps really appreciated. Thanks a lot.Hi Chris,
That's a bit odd indeed. If I understand your question correctly, you do get the BW reports in the correct language (either English or Malay) using the url's in your post but not when using them within a standard BW report iView?
The language setting for the iView has, unfortunately, nothing to do with the language for the content itself but can you tell me what the requested URL is for both Reports?
The BW Report iView is based on the Application Integration Component that generates the URL based on the paramaters you provide in the BW report iView.The following template is being used: <iView[PORTAl_URL]>?System=<System[url_Encode]>&Report=<Report>&DynamicParameter=<DynamicParameter[url_Encode]>. I could be that the generation of the URL fails due to the 7 (don't know why, just a gut feeling because it's the only thing that's different between those urls). You could try to use create an iView based on the Application Integrator instead (some more control over the URL template) but first you need to check whether the URL generated by the iView is correct.
Cheers!
Frodo
P.S: Award points if you find this useful -
Change BAPI for Weekly Expense Report using PR04
I am looking for a way to change a Weekly Expense Report using a BAPI. I am able to create one , however , unable to change . Has anyone accomplished this before ?
Solved on section SAP Travel Management, thread: 3567830.
Regards,
Gregory. -
Programmatically change the "location" field in Reports/Subreports
Post Author: suneberg
CA Forum: .NET
I need to change about 800 reports with subreports.
The field location contains now: ServerName.DatabaseName.TableName (i.e. "Neptun.IManager.Customer")
It should be changed to TableName (i.e. "Customer")
How can I do this through the API?Post Author: suneberg
CA Forum: .NET
Addition: this is in CR 8.0 or 8.5 -
Changing Settings for Adobe Crash Reporter -CS4- app does not launch
Attempting to follow instructions on http://kb2.adobe.com/cps/508/cpsid_50879.html
The application does not launch and the page has no directions on what to do then. Reinstall Photoshop?
Thanks in advance.
Photoshop 11.0.4 — 2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
Wo Tai Lao Le
我太老了Thank you for the prompt response, guru Cox.
Deleting the com.adobe.crashreporter.plist file had no effect. I have never changed files inside any application bundle; however…
…I was able to launch the Adobe Crash Reporter successfully from inside the Bridge CS4 application bundle. The preferences were already set as desired. Comparing the two Adobe Crash Reporter app icons, I noticed that the one inside the CS4 app bundle (the one that will not launch) has its Owner set to system, while the one inside the Bridge app bundle that launches successfully has it set to myusername. Changing that ownership on the non-launching copy of the crash reporter had no effect. I had Repaired Permissions on the disk a couple of times today, with no effect.
Now I wonder whether it's more prudent to leave things as they are, inasmuch as (1) I can't even remember the last time Photoshop crashed on me (the last time Bridge crashed was in March) and (2) now I know the preferences are set as desired.
Later today I'll try re-installing Ps 11 without un-installing first, and I'll report back.
Thanks again.
Wo Tai Lao Le
我太老了 -
Change Date For Field Comparison
I need help changing the following date, 07/23/2009 to 07/01/2009. Regardless of the date that is read from table I always want to change it to reflect day 1 another example: 12/24/2009 to 12/01/2009.
Any help would be greatly appreceited.
Thanks Jim DyerIf I understand, you want the first day of the month relative to your datefield:
date(Year(datefield),Month(datefield),01) -
i am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name Type
appid String
location String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name Path Type
Url /text() String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.i exported the application from apex.oracle.com and imported it to our environment
import went fine, but when I ran the IR page I got
ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well -
How to change the table's for an existing report
Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
AbhishekIn the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl -
I am using Apex 4.2.2.00.11
am using the following description to create a web service reference:
web reference :REST
Name :Yahoo Map
URL :http://local.yahooapis.com/MapsService/V1/mapImage
HTTP Method: GET
Basic Authentication: No
Add Parameter:
Name Type
appid String
location String
Output Format: XML
XPath to Output Parameters : /Result
Output Parameter:
Name Path Type
Url /text() String
Then i tried to create form and report on webservice:
Web Service Reference Type: Yahoo Map
Operation: doREST
All the fields i keep as default
I tick the checkbox (url)in report Parameter
After clicking next whereever required i click create button
I get the following error
ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
Please someone help to solve this as i need to fix it urgently.336554,
Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
57434 -
Change field label for field IZWEK in transaction AS03
Hi experts,
I would like change field label for field IZWEK because I want use it for another purposes. Itu2019s name is Investment Reason at transaction as03.I can change name this label in reports by using se63(translation->abap object->short text->repository text->data element) and giving object name as IZWEK. I get changes in reports only, in help(F1). But I havenu2019t idea what cause change label in as03 transaction.
Help me please.
Regds Stenwain tr. AOLK and AOLA you can change this.
-
Change Pointers for the fields PERNR, GBDAT and PERID
Hi,
I want to know, how we can delete/de-activate and then add/activate Change Pointers for these fields. Is my Question a valid one? Please guide me if I'm wrong and help me in this issue.
Thanks in advance,
Exertive.
Message was edited by:
ExertiveHi Suresh,
I didn't get your point exactly. With this report, we can only Log the Changes that has been performed on a Particular Pernr or an Infotype. Actually, if see go through my Previous Post, you will get Clear Idea. Actually, I'm looking for the Concept below:
Actually, I'm using the Standard ALE Process for Masking Master Data fields (PERID and GBDAT) with default values from one system to another using the Message Type, HRMD_A (which will be used as a Standard Message Type for HR Personnel Administration and Organizational Management). For this, I' have used two Conversion Rules in the above Message Type. To make this ALE trigger, I have to Run the Report, RBDMIDOC. But, before trigerring the ALE for all the Employees in the System, I want to test the ALE for few Employees, whether it is working properly or not. For this, I think, I need to delete the Change Pointers for all the Employees except for the few Employees whom I want to Test. But, I don't have any idea, how to delete those Change Pointers. Please guide me some solution or provide me some document where I can find exact procedure for doing this. Guide me, If I'm going in wrong procedure.
Thanks in advance,
Exertive.
Maybe you are looking for
-
IPhone 4S stuck in recovery mode while trying to upgrade to iOS 7.0.4
I ran into the issues with my iPhone 4S while trying to upgrade it it iOS 7.0.4 OTA and I have tried everything I can to recover it but no luck. I have tried different USB ports, different PCs altogether with av tuned off, and finally a MAC Pro this
-
MacBook Pro 17" Will Not Install Boot Camp
Has anyone else found that Boot Camp will NOT install on a 17" MacBook Pro? We were able to partition the drive and install Windows but when we tried to install the Mac Drivers we kept getting the error message "this software will not install on your
-
Images not Displaying (Showing as a black box) in Excel 2011 for Mac
I'm using Office 2011 for Mac, on a 2013 iMac with Mavericks (10.9.4). I have a .jpg image I'm trying to insert in the footer, and it is only showing as a black box. I even tried saving as a .pdf, and it still shows as a black box. How can I fix so t
-
Password of ddic in ecc 6.0 ides
hi, Password of ddic in ecc 6.0 ides Thanks in sdvance.
-
Vendor consignment - an output generated periodically when it is consumed
Hi SAP Experts we have a requirement to have an output should be generated periodically in case of vendor consignment when the quantities are consumed from the consignment stock . We basically want to inform the buyer,vendor periodically of the cons