Change date after transert FTP

Why Dreamweaver 6 or 7 or 8 change the created and the
modified date of the localy html file? Is this possibe to change
that. I dont'find where.
When I tranfert a file in the root folder of my UNIX Samba
server, the modified date appears for few seconds then disappears.
And the date as realy disappeared on the server. So unix put a new
date: 2038-01-19, the ultimate date on a windows 32 bits. But
why?

There are Three Scenarios when you may need to change hiring date:
1) After payroll is run - when hiring date is before actual Hiring date.
2) After payroll is run when hiring date is after actual Hiring Date.
3) Before the payroll is run.
1) PA30 -- Copy actions infotype - action type - incorrect entry -- save and come out PA 30 copy actions infotype -- action type - correct entry - now correct your entries, save your date is changed.
2) PA30 - Utilities - change payroll status - delete accounted to feild, save and come out - then again utilities change entry leaving date - corrrect the hiring date - save and come out.
3) PA30 - Utilities change entry/leaving date change your date and save.
but here in ur case u need to reverse the doc swaroop
Edited by: Sikindar on Dec 2, 2008 12:12 PM

Similar Messages

  • ALV - Maybe a NEW problem to get changed data, after input from ALV

    Hi all,
    I have tried to search an existing post to solve this ALV problem, with key words 'ALV' and 'refresh', but I don't find the good one... so sorry if the problem have already been solved.
    <u>An example of the problem and process should be more clear than words :</u>
    1) CALL ALV
    CALL METHOD grid1->set_table_for_first_display
         EXPORTING
                   is_layout        = gs_layout
                   is_variant       = gs_variant "&see below
                   i_save           = x_save     "&see below
                   I_BYPASSING_BUFFER = 'X'
         CHANGING
                   it_outtab        = t_zppegam[]
                   it_fieldcatalog  = GT_field_cat_entete[].
    2) User edit values from cells from ALV.
    For example, insert a new line with '+' button, and <u>fills each cells</u>.
    3) The problem is that at the beginning of the PAI
    there is a blank line into internal table t_zppegam,
    instead of the line with the data filled into cells ALV by user
    3') Internal table t_zppegam have the good data only if user clik on the button refresh of ALV, before go throw PAI.
    Have any suggestions? Thank you for your help.
    Best Regards,
    Tony.

    Hi all,
    I have just solved my problem...
    I have found this one into SE38 / BCALV_GRID_EDIT fifth program.
    data: l_valid(1) type c.
    call method grid1->check_changed_data importing e_valid = l_valid.
    Tony

  • How to change data after getting an error in me51n,std purchase requisition

    how to make input field editable after getting an error message in ME51N,std purchase requisition
    Edited by: SQLFOLLOWER on Nov 18, 2009 1:00 PM

    Try this
    In user_command form...
    LOOP AT IT_DATA.
    IF  CHECKBOX __MARK EQ 'X'.
    write logic wht u want....
    ENDIF.
    ENDLOOP.

  • Change date for Leave of absence

    Hi,
    We have the following scenario in our ESS form--
    When an employee uses Portal form for changing the Absence date ( i.e change date after it has been approved or rejected )for the Absence Type LOA . The Manager who receives the work item should get a warning message.
    Where can we add this warning message? Is there any user-exit or any configuration changes to achieve this ?.
    Thanks,
    Veena.

    It can be done by WF, Why you need a warning message?
    Anyhow check badi
    PT_GEN_REQ or PT_ABS_REQ,

  • I can not map field after changing data source location

    Hi
    I have a small problem that I got a report file and database from my customer, after that I setup database, open the file and change data source to my setting. but some filed can not map. The field mapping widonw does not display all field in the table. Of course I have checked the missing fields are existing in the table.
    OS:Windows7
    DB:Oracle11
    CR:XI Release 2
    Does anyone have an idea?

    hi,
    In Map Fields window, there is an option "Match Type".
    Please Unchek that option, so that you will be able to see all the fields from that table.
    Also, while mapping please verify the datatypes of source and target fields.
    Regards,
    Vamsee

  • My ibook keeps shutting down completely with the date to reverting back to 1969.  i restart only after i plug in charger it lets me, then change date and save.  the next time i use same thing happens, safari, iphoto, email are the only ones i have used.

    my ibook keeps shutting down completely with the date to reverting back to 1969.  i restart only after i plug in charger it lets me, then change date and save.  the next time i use same thing happens, safari, iphoto, email are the only ones i have used.
    please help!  i am at a loss here.
    thank you, movie lady
    ibook g4

    The iBook does not have a backup (PRAM) battery. It only has the main battery and a small capacitor which maintains the settings long enough to do a battery swap. If the battery is dead, what you are seeing can happen.
    If the battery is not a problem (or even if it is), you could try resetting the PMU and see if that helps.

  • Performance Management: Changing plan end date after publishing plan.

    Dear experts,
    I want to change my plan end date after publishing the plan. But there is no update option when i go to HR professional > Performance Management > Performance Management Plans > Query A plan > Update.
    Kindly guide me.

    Change the End Date of Plan and Rebublish the Plan.
    Thanks

  • Last changed date different between two systems after transport

    Hi, first of all, I am not from basis background and just want to make sure whether is this something correct or not.
    I found that the "Last changed date" and "username" are not same between the original system and the target system. Is this something configurable?
    And the "username" field is totally empty. However, the program code's version is identical in both systems.

    I think I misunderstood your question.  You are referring to the system Transports not the connections between systems.  If the Transports are not transferring all the contents, you really should talk to your basis folks and tell them which items are not being reproduced correctly.
    Regards,
    Mike

  • How can we Change employee joining date after salary posted

    Dear concerned,
    I am facing situation where we need to change the joining date of an employee from 26.11.07 to 22.11.07.
    also dec salary accounting entry has been posted.
    to change date i need to delete all processed salaries but as accounting entry has been posted i can't delete it.
    please tell me way out.
    Regards,
    Gaurav.

    Hi Swapana,
    I tried your options but gives message " Personal number is already accounted for"
    If I reverse salary it says voucher already posted
    I do not think we can reverse accounting entry posted by SAP.
    please suggest.
    regards,
    Gaurav

  • Can not change data in Input Ready Query

    All,
    I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
    Note:
    1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
    2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
    3. I am not using any characteristic restrictions
    4. I have not set any data slices
    5. I have set the property for Planning "Start query in Change Mode"
    6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
    7. I do not have currency/unit in row/column.
    8. There are any locks occurring
    Any pointers welcome.
    Thanks,
    Milind

    Hi Milind,
    Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
    I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
    Have cross checked all the points that you mentioned in this post but I cells do not change.
    There should be some way around to solve this problem.
    Thanks

  • How-To "Refresh a table of data after inserting or deleting"

    I'd like to say a word on the how-to article "How to refresh a table of data after inserting or deleting a row using ADF".
    (http://www.oracle.com/technology/products/jdev/howtos/1013/updtable/index.html?_template=/ocom/technology/content/print)
    I spent a lot of time on it because I needed help in implementing simple CRUD functionality on a table, using JSF-ADF-TopLink technologies.
    While the the article does provide correct steps, it is in one important place not specific enough, so the reader may easily get stuck. In section "Refresh the data table", point 1: when you double click on the removeEntity() button, in Structure window, then you do not get the required dialog. You get CommandButton Properties dialog.
    You must click on the removeEntity() button in Editor's Design view. But even there you may get the CommandButton Properties dialog, not managed beans dialog.
    You may resolve that by going to JSF configuration file, faces-config.xml, and switch to Overview view. This will show you the managed beans that you have.
    Then, you may already have a backing bean for the page. You can use that and avoid creating a new managed bean.
    I could understand what the operations mean only after very careful reading of "Creating More Complex Pages", section "Overriding Declarative Methods" in JDeveloper Help (or in ADF Developer's Guide PDF document).
    In general: I believe that "ADF bindings" need more conceptual explanation, maybe in form of an article. Grammatical form "bindings" may create a false understanding that "bindings" are just references. But they are not -- ADF bindings are active objects that handle traffic between UI components and Data Controls. It seems that "bindings" even communicate among themselves. Maybe it would be more understandable to differentiate strictly between "binding objects" (or "binders"?), binding object definitions and binding object references.
    It would be very helpful to have a diagram showing grahically what specific binder objects are created in a small apllication (2-3 pages using 1-2 tables), with whom they communicate and what type of data is passed on.
    Priit

    Hi
    Thanks for your infos.
    Yes exactly I use almost the same code you have post here.
    Could You answer to my next questions?
    First - >what do you mean by saying that "it's not good idea using refreshing in IE?" Of course I use refreshing in backing_bean for my button "remove" that removes row, commit changes to database and refresh table, almost the same as You said in your post:
    Code in backing_bean is and comments on difference to Your code is below:
    public commandButton2_action1(){
    BindingContainer bindings = getBindings();
    OperationBinding operationBinding =
    bindings.getOperationBinding("removeEntity");
    Object result = operationBinding.execute();
    if (!operationBinding.getErrors().isEmpty()) {
    return null;
    //above remove entity, but I dont now if it do commit to database? So i do it below
    OperationBinding commit1 = bindings.getOperationBinding("Commit");
    commit1.execute();
    //and at the end I refresh my table, "findAllRezerwacja1 - it is an id of the methodAction, not the iterator -> is it ok? or should I change to Iterator id?
    OperationBinding requery = bindings.getOperationBinding("findAllRezerwacja1");
    requery.execute();
    return null;
    Page Definition code for this:
    <methodAction id="findAllRezerwacja1"
    InstanceName="SessionEJBLocal.dataProvider"
    DataControl="SessionEJBLocal" MethodName="findAllRezerwacja"
    RequiresUpdateModel="true" Action="999"
    ReturnName="SessionEJBLocal.methodResults.SessionEJBLocal_dataProvider_findAllRezerwacja_result"/>
    <table id="findAllRezerwacja2" IterBinding="findAllRezerwacja1Iter">
    <AttrNames>
    <Item Value="dataDo"/>
    <Item Value="dataOd"/>
    <Item Value="idRezerwacja"/>
    <Item Value="liczbaUczestnikow"/>
    <Item Value="prowadzacy"/>
    <Item Value="uwagi"/>
    </AttrNames>
    </table>
    <methodAction id="removeEntity" InstanceName="SessionEJBLocal.dataProvider"
    DataControl="SessionEJBLocal" MethodName="removeEntity"
    RequiresUpdateModel="true" Action="999">
    <NamedData NDName="entity"
    NDValue="${bindings.findAllRezerwacja2.currentRow.dataProvider}"
    NDType="java.lang.Object"/>
    </methodAction>
    <action id="Commit" IterBinding="findAllRezerwacja1Iter"
    InstanceName="SessionEJBLocal.dataProvider"
    DataControl="SessionEJBLocal" RequiresUpdateModel="true"
    Action="2"/>
    </bindings>
    //and rest of code for Iterator etc
    My second question is, why when you use refresh button in IE (I know is not recommended as You said, but sometimes user do it, so I want prevent situations that I will describe here) so when I press refresh button in IE exactly after removing one row by clicking my button, refreshing by pressing IE button is doing the same --> is deleting next row. How to stop deleting row, when for example user would press IE refresh button after pressing remove button for table. If I change selection in table after deleting row, and press refresh button in IE, instead of deleting row, I got error message: JBO-29000: JBO-35007: and
    JBO-35007. So where Im doing wrong. Maybe I should do sth with postback ? Could You help me? Thanks in advance
    Last one question: what is the difference between using delete and removeEntity from operations node? Im now reading carefully ADF Dev Guide, so I hope I can find infos there? But if You know, please answer to this question.
    Thanks

  • Table for Delivery changed data

    Dear Gurus
    There is a requirement to create a z report based on delivery details. As according to the business process, the delivery weight is changed by z activities somedays after creation of delivery. Is there any table from which i can get the previous (old) value of weight which is now replaced by new weight value. (As this can be seen in delivery change data details, it shows the previous weight value and new weight value but i cant find the table for it)
    Thnx in advance
    Deepak Mehmi

    Hi
    Since Lakshmipati has already answered the question just to add on in CDHDR with VL02N you can find the object class as LIEFERUNG for any change in net weight. You can query in CDPOS with object class as LIEFERUNG as Object class and Object Id as the delivery number (with preceeding zeros-to make it 10 digits). The FNAME would be BTGEW for gross weight and NTGEW would be for net weight. The VALUE_NEW would give the new value and VALUE_OLD would give the old value.
    Thanks
    Indranil

  • Sales Order creation/ change date for the items

    I have a unique scenario and i need to get a Report for this
    A sales order is created for 4 line items.
    Out of these , for 2 line items a delivery is created. I need the sales order creation date and time  for these 2 items in a custom report
    Now the other 2 items go in to some kind of block- Now these are released by going in the sales order VA02 and after releasing the delivery is created. Again for these two items , i need the sales order change date as after a user goes and changes the sales order to remove the block only then delivery is created for these two items
    Also another scenario is the 2 line items go for back order and when we get stock  at tht time system confirms the stock and then the delivery is created for these. So also for this when this change occured i need to get the date for these 2 line items
    Can any one please suggest how to get this data  from the scenarios?
    I dont want to get the date when the delivery is created as i can get tht from the LIKP table. I need the sales order create and change dates for these.

    You may be aware, any changes to a document will be recorded in CDHDR (for header changes) and CDPOS (for item changes).  You can explore these two tables.
    thanks
    G. Lakshmipathi

  • I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?

    I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?
    I havent' took any backup of my notes in icloud. The moment I enter the password after restore my notes will be empty. The only option to get notes back is that after restore skip entering icloud password. But any time I enter icloud password anywhere again my notes will be empty. I have huge data saved in my notes. Apple need to look into this issues very seriously. This is the 5th time I restoring my iphone today just to get my note back.

    I have the issue with losing all my notes and I don't even know why.  I can't remember changing any email account info.  What happened to them?
    Ipad 3rd io7
    Please Help!
    Thank you,
    S.

  • Editable ALV, how to capture changed data

    Hi All,
    I have created an editable ALV. User can make some changes in the displayed record and press "Submit" button (custom button on application toolbar), the program should validate the data and write the file on application server if validations are successful otherwise controls stay on the same screen.
    I am handling this validation and writing file part in PAI of the screen.
    Problem: The program is capturing the data when user changes it for the first, but program is failing to capture the subsequent changes (user makes after the validation fails). Program processes always the first time changed data only. Please help me in getting this problem resolved.
    Step1 : Program shows output.
    Step2: User changes Company Code.
    Step3: User clicks on Submit Button.
    Step3.1: Program reads the new data and performs validation.
    Step3.2: New Company code is not valid, error displayed.
    Step4: User changes the company code again, presses submit button.
    Goto step 3.1 -> Here program does not read the new data, rather first time changes company code is again read and validated, and program shows the same error again, which is not a desired result

    Hi Ashish,
    you need a method HANDLE_DATA_CHANGED as handler for grid event DATA_CHANGED.
    Use
    LOOP AT er_data_changed->mt_mod_cells ASSIGNING <mod>.
    to check all changed data. In this event, add the error messages to ER_DATA_CHANGED object.
    set all required handlers, i.e.
    SET HANDLER:
          handle_data_changed          FOR ro_grid,
          handle_data_changed_finished FOR ro_grid,
          handle_toolbar_set           FOR ro_grid,
          handle_user_command          FOR ro_grid,
          handle_hotspot_click         FOR ro_grid,
          handle_f4                    FOR ro_grid,
          handle_f1                    FOR ro_grid.
       ro_grid->set_toolbar_interactive( ).
    Register ENTER and MODIFIED events.
        ro_grid->register_edit_event( cl_gui_alv_grid=>mc_evt_enter ).
        ro_grid->register_edit_event( cl_gui_alv_grid=>mc_evt_modified ).
    Regards,
    Clemens

Maybe you are looking for