Change date and time grayed out
I'm running iPhoto 11. I'm trying to change the date and time on some scanned in photos and the option is grayed out. Not only that, the option is grayed out on many of my photos taken by my camera. This is frustrating because in the chronological sort, the photos are WAY out of order.
Hello, i don't know if you figured this out but i just had the same problem on the individual picture however, when i tried doing the "Adjust date and Time" on the Event, it worked!
Similar Messages
-
put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer
It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
Was there an update maybe ? -
I have selected both photos and event separately in several attempts to change date and time in Photos/Adjust Date and Time without success. Each time I have attempted to do so another date and time has replaced the previous one but each has been incorrect. Some dates have been inserted dating back several centuries!! The time as well as the date has been incorrect.
I would appreciate suggestions and help in making the change correct.
Thanks.
VernonI also have this problem. One folder in particular is affected; within it after a few times to get it into the 2000's from 1900's, it is currently showing 1539.
I am at a loss since the batch change roller lets me select the correct year in iphoto.
I thought it might be a glitch in the older software so upgraded to the '11 iphoto. This made no difference at all.
This is still an issue unless the original poster got an answer or worked it out him/her self.
I also use Picasa on the same system but since it gets the photos from iphoto, it gets its errors there too. -
Unable to Determine the Change Date and Time for records in infotype 2011
Hi Everyone,
We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
It is not possible to get the audit logs for infotype 2011 as it is switched off.
We found this table TEVEN and just the same thing, the field "change on" is blank.
Kindly help us on how we can determine the change date and time for records in infotype 2011.Hi Prasad,
Here's the scenario.
On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
However, when I checked infotype 2011, the record is there.
So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
Can you help further on this? -
SCCM 2012 R2 changing date and time for patching software update groups
I recieve this error when changing date and time for software update group. worked fine yesterday before patches to the server were applied last night. we removed patches but still get error below. Any help would be great.
ConfigMgr Error Object:
instance of SMS_ExtendedStatus
Description = "Property array AssignedCIs exceeded the max allowed";
ErrorCode = 1078462259;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspupdatesassignment.cpp";
Line = 94;
Operation = "PutInstance";
ParameterInfo = "";
ProviderName = "ExtnProv";
StatusCode = 2147749889;
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlQueryException
The SMS Provider reported an error.
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger trigger)
System.Management.ManagementException
Generic failure
Stack Trace:
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put(ReportProgress progressReport)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObject.Put()
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(IResultObject resultObject, List`1 resultObjectsPut, Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.SmsDialogData.Put(Boolean retainLock)
at Microsoft.ConfigurationManagement.AdminConsole.DialogFramework.Forms.SmsPropertySheet.Put(ActionTrigger triggerno it is the final version... is working today after cleaning up database... is working now...thanks
Hello Robert,
would you please give some more informations, as I have the same issue and don't get what you mean bye "cleaning up databases".
Regards ooGDoo
ooGDoo -
Why does calendar keep changing dates and times on icloud
My calendar keeps randomly changing dates and times when using icloud and it is doing my head in.
Is there a simple way of rectifying this or do I have to get rid of icloud altogether (to save my sanity?)If this is an iCloud calendar, you might want to check your time zone and time zone support settings. Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you. Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off. -
Not allowed to change date and time for some photos; why?
I have some images that I scanned in of old photos. I'm trying to change the date and time and location to reflect the time the original photo was taken. I know how to do it in the menu system, but when I try to change the original data it tells me they are of a file type that won't allow this metadata to be changed. They are simple JPEG's so I'm not sure what the problem is. Do I need to convert it to some other format first to be able to do this? Any ideas would be helpful...
Hello Toran,
are trying to change the date and time of the versions only, or are you trying to change the date and time of the masters too? If you are using
Meta Data -> change date and time
deselect "also change master file", this causes the problem, the new Aperture version seems not to allow to change the date and time of masters.
There have been long discussions on this problem, see e.g. this thread; I do not know if somebody has found a solution by now,
Regards, Léonie -
Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
My app store is telling me i have yo change date and time setting to download apps and idk what is wrong cause date and time are correct
Is the Time Zone also correct?
Also see:
Can't connect to the iTunes Store -
How do you change date and time in Photos?
How do you change the date and time of photos in the new Photos app? I know how to do it in iPhoto, I'm having a problem figuring it out for the new app. I have a MacBook Pro 13" running on OS X Yosemite Version 10.10.3
Select photos
Click "Image" menu > "Adjust Date and Time..."
or
Select photos
Command + i（or "window" menu > "info")
"Double-Click" around "Date and Time" on "info window" -
My new Nokia Lumia 800 changes date and time after...
When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.
chrysale wrote:
I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps -
Time Zone...When changing date and time.
After having updated to version 10.6.1, I am still experiencing the same top sites glitch as everyone else. However, is anyone else's time zone graphics funky (missing squares?) and really unresponsive when moving across the earth from side to side?
For me - I am pretty anal about keeping my camera's time accurate, and I always adjust time on import to the correct time zone if I am shooting in a different area (I live in AZ time, and when I shoot on the east coast i set the time zone to eastern on import). So I doubt I would ever use that feature.
If you ever do need this feature, be aware that the date and time displayed in the Adjust Date and Time dialogue box are the date and time in the time zone your computer is set to, not the time zone the picture was taken in.
So if you have a picture taken on the east coast and you open the adjust date/time dialogue, you will see the time for the picture in AZ time (a few hours earlier than the time displayed in the Image Date field). To set the time for the picture, you have to figure out what time it was in AZ when the picture was taken, and enter that time.
After playing around with this I've filed it as a bug with Apple. Even if they aren't going to let you change the time zone (functionality I think is needed), they should at least consistently use the same time zone with a picture, rather than forcing you to do time zone conversions by hand. -
Changing date and time is wrong with time zone problem
Okay, searched some of the forums, but didn't get the most correct answer to this:
I just imported all my photos into Aperture from iPhoto (chose to have Aperture manage files as I don't plan on using iPhoto any longer. When I imported the files, I decided to do some organizing by date into folders. no problem.
In some of my projects, I found some files that I imported from scans or got from others who had a film roll and processed it at a lab, and the dates from those files aren't the dates that the event took place. I went into Metadata>Adjust date and time, and changed the date (not so much the time I'm worried about), and checked the "change the masters" little box, too.
After I close out of that box, the picture has the wrong date. I've determined this is because of the time zone support. I currently live in Japan, and I would like my photos here to show up as the date in the place they were taken. I think the date I enter, it thinks is the date I'm currently in (GMT +9), but aperture chooses to convert the date as if I was saying "hey, the picture I took happened on "date" in GMT +0:00)" which then makes it look in the metadata view as if it happened a day earlier.
Any imported photos come in as the correct date and time and correct time zone, as far as I can see. It's just when I change the date and time it thinks I mean to have aperture convert it to GMT + 0:00. (but on a little more of a funny side... older pictures that happened in other time zones back in the states it lists the correct date and time for when the picture was taken, but "says" it's GMT +9:00) (another issue I'll deal with later maybe!)
Hope I've described it in such a way that you can get it.I changed time and now my MacBook won't work
-
Changing date and time on photos
I changed the date and time of some of my photos in iPhoto, and I kept the original date/time for others. When I merged the two in iPhoto, they fell chronologically, which is what I wanted. But when I created a generic file on my desktop and moved the files from my iPhoto to this folder, the photos got mixed up.
How can I sort these photos--that are now out of iPhoto--by the date that I gave them in iPhoto? Do these changes made in iPhoto not permanently stay with each picture?avarda
Actually you can't.
It's quite possible to have a photo taken on January 1 2000 in a file created yesterday.
When iPhoto sorts the photos on date and time it is reading the Exif data in the file about the Photo.
When the Finder sorts on date and time it's reading the Date Created and Modified of the file. The Finder does not know about Exif data.
Yes the Exif data (and the changes you made) travel with the Photo, but that's only of use in applications that know about Exif data - which is just about every photo application on the Planet - but the Finder is not a Photo app.
To do what you want: Now that you have the photos arranged in iPhoto, select them and go File -> Export: Kind: jpeg and look at the naming options in the dialogue box: Explore Fiename -> Sequential. Then, in the Finder, sort on Filename.
Regards
TD -
How to get the latest Change date and time of a M.O. from View VIAUFKST
Hi All,
I want to get the latest date and time of a M.O. from view
VIAUFKST. I have written the query like this...
SELECT AUFNR
AEDAT " Changed Date
AEZEIT " Changed Time
FROM VIAUFKST
INTO TABLE I_VIAUFKST
WHERE AEDAT >= W_LASTRUN_DATE
ORDER BY AEDAT DESCENDING.
but its not giving me right results... Pls help me out on this or suggest me the right approach to achieve the same...As this is very critical issue...
Advance Thanks and Points Gauranteed...
Suresh> SELECT AUFNR
> AEDAT
> AEZEIT
> FROM VIAUFKST
> INTO TABLE I_VIAUFKST
> WHERE AEDAT >= W_LASTRUN_DATE.
>
> IF NOT I_VIAUFKST[] IS INITIAL.
> SORT I_VIAUFKST BY AEDAT AEZEIT DESCENDING.
> READ TABLE I_VIAUFKST INDEX 1.
> ENDIF.
>
> The above statement is giving me different results...
> such as...
>
> 1. 30/11/2005 19:20:11
> 2. 29/11/2005 22:10:09
> 3. 30/11/2005 20:56:09
> 4. 28/11/2005 23:10:09
>
> by using the above SORT statement i am getting the
> fourth record as the latest, where as it should give
> me the third record....
>
> Please advise,
> Suresh.
Hi Suresh,
The reason why you are getting this result is because the system is interpreting the DESCENDING only for AEZEIT not for both. Change it to
SORT I_VIAUFKST BY AEDAT DESCENDING AEZEIT DESCENDING
Maybe you are looking for
-
Display Problems when Creative ZEN 4GB is keyloc
When my ZEN is keylocked the display turnes off. when I unlock it the display doen't bright up again, just a little bit but actualy it stays balck and I can t see anything on the display. what shoul?d i have to do to turn the display on?
-
I'm sure I am missing something basic here, but no amount of searching has yielded a result: I have a SQL Query report for a product with length, width, height column data - two queries. 1. some products don't use these fields (ie they are null), whe
-
Trouble shoot iBook G4 problem
I have an iBook G4 that is having problems. This computer has been replaced with a Macbook. I am trying to determine if the iBook is salvageable. The iBook was dropped on the floor about a year ago. It required a replacement logic board. It was repla
-
The deployment has not been installed.
hi am trying to instal jstl library in my WebLogic Server Version: 10.3.6.0,am geting this error The deployment has not been installed. Message icon - Error weblogic.management.ManagementException: [Deployer:149105]An attempt was made to deploy a lib
-
how can i fix "the sim card inserted in this iphone does not appear to be supported " after restoring a factory unlocked iphone 4