Change DC vendor name

Hi,
I have Java Webdynpro DC, I want to change the DC vendor name
I followed the following steps
1. create new DC with the same name & the new vendor name
2. copy the src folder from the old DC to the new one
When I did these steps the Build was OK but in deploy I got this error:
27/07/2010 12:03:33 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : Vm-Tsapdev
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/04321592/LOCALS1/Temp/temp2043company.com~mat_doc_cancel.ear
Result
=> deployment aborted : file:/C:/DOCUME1/04321592/LOCALS1/Temp/temp2043company.com~mat_doc_cancel.ear
Aborted: development component 'mat_doc_cancel'/'company.com'/'local'/'20100727120315'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application company.com/mat_doc_cancel.. Reason: Clusterwide exception: Failed to deploy application company.com/mat_doc_cancel. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application company.com/mat_doc_cancel. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
please help

Hi,
Plz try out following steps:
a) Chek the dependencies of the DC i.e. what all DCs the DC is using
b) Make sure all the DCs are deployed first; before trying out deployment of this DC
Regards,
Ganga

Similar Messages

Changing the vendor name

Hi to all,
I have question, I just wondering why there is no error in F110 when I change the vendor name.
let say I change the vendor name on 10. 20.2008, then I submitted a proposal on 10.28.2008 the approved on 10.3.2008. then but still the vendor name is old name but no error prompt.
can anyone give a reason why?

Hi Deepa,
As you said system will not prompt error because vendor code still the same right?
I would like to know where I can go or which t-code should I use? in In my view when changing any vendor master or any changing vendor name should have control, I mean system should prompt msg or error so that payment won't continue in PF.

Not able to change vendor name while creating a DC under a track in NWDS

Hi all,
I am trying to create a new DC under a track in NWDS.I am not able to change the vendor name .It is showing sap.com and the field is greyed out.Did anybody faced this issue earlier?
Need your inputs.
Thanks and regards,
Rajesh

Hi Rajesh
Please check this thread.
cannot create a new DC
You can create new SC with your name reservation and add to your track.
Hope this will help you.
Thanks
Arun

Change Vendor Name in SRM

Can any one tell me how to change the Vendor Name in SRM which is getting replicated from ECC where the name has been change to the new vendor. The new Vendor name is not coming over in the replication from ECC (5.0). Reason for vendor change is that the old vendor was purchased by another vendor.

Our common reasons for Vendors not transferring from ERP to SRM using TCode BBPUPDVD or BBPGETVD are.
1. Vendor does not exist in ERP
2. Vendors email address is faulty
As stated previously SLG1 log usually reveal the problem.
We also have a problem with the scheduled Vendor Sync job that runs each night failing to import new vendors, even though the spro config has been set to include new vendors.
I suspect that the Vendor Sync job my be stopping as soon as it finds a faulty email address and we do have a few hundred of these lurking in our ERP system. I plan to investigate, when I get time, but if anyone else has this problem I would like to here of your experiences?
Hope this helps
Allen

Where do I change Vendor Name of a DC?

I have named the Vendor Name of my DC wrongly (I used the default "sap.com").
How do I change the Vendor Name property after I reimport to my local DCs workplace in my NWDS?
Thanks.
Kent

Hi, Gopi.
I refer to DC Command Line Tool help menu (link you provided in the reply),
I run the following command : RENAMEDC
Here is the systax:
renamedc -s <compartment> -n <DC name> -v <DC vendor>
--targetname <new name of DC>]
--targetvendor <new vendor of DC>]
[--actname <name of activity that contains the changes>]
[--actdesc <description of activity that contains the changes>]
Info of my DC:
Local Development dtc path: C:\Documents and Settings\j2eadm\.dtc
Name of the DC = claim
Name of the vendor = sap.com
I want to change the name of the vendor to : xxx.com
so here is the command:
rename C:\Documents and Settings\j2eadm\.dtc -n claim -v sap.com --targetname claim --targetvendor xxx.com
But I got the following error:
No valid development configuration object available.
Can anyone point to me what mistake I have made?
Thanks.

Change Vendor name

Hi to all,
I have question, I just wondering why there is no error in F110 when I change the vendor name.
let say I change the vendor name on 10. 20.2008, then I submitted a proposal on 10.28.2008 the approved on 10.3.2008. then but still the vendor name is old name but no error prompt.
can anyone give a reason why?

Dear,
Enter vendor code in XK02
Check again
U can check in table LFA1 also
check in OB23for change vendor (centrally)
blocked the posting in old code by XK05.
or,
Create a new Vendor and goto TCode F-02
Dr Old Vendor with line items
Cr New Vendor with line items
Regards,
R.Brahmankar

Vendor Name In Po

Hi Mentors
Once i created the po with vandor name, if i want to change the vendor name it is possible.
( Gen we will try me22n) i checked that.
Regards
Laxman

Hi,
We cannot change Vendor Once Purchase order is created / saved.
In case you are not sure about the Details in PO, You can hold the document before save the Purchase Order.
Reg,
Ashok
Assign points if useful.

Include the Vendor name in S_ALR_87012089 : Vendor Changes

Hi ,
The requirement is to add a vendor name to the report S_ALR_87012089 : Vendor Changes.
Please let me know the feasibility and the way to achieve it.
Regards
Rudra

Hello,
You just need to modify the layout to add the field "Sort address of customer".
Regards,
Renan Correa

Vendor name is deleted after the approver changes the product category.

Hello,
We have implemented workflow WS14000044(Completion by Purchaser) and
WS14500015(Item-Based Main WF).
At workflow WS14500015 level, when the approver changes the product
category, the vendor name is deleted.The previous validation allows the
PO creation , But the PO is created without vendor.
Furthermore under transaction process purchase orders 'BBP_POC' the
purchaser can not access in change mode to the vendor field in order to
add a vendor.
How can we give access in change mode to the vendor field for purchaser in transaction 'BBP_POC' ?
Regards,
Lina

Hi,
Which SRM version are you working on?
Please see if the foll notes help:
<b>801591 Source determination after item change</b>
881346 Vendor incorrectly deleted
873972 Sources of supply in the shopping cart with catalog items
908178 Transferring reference: Deleted vendor
Note 829652 - Completion workflow in shopping cart: Vendor
789087 Changed product category: Vendor not deleted
BR,
Disha.
<b>Pls reward points for useful answers.</b>

Vendor name change

Hello All,
I have one contract with vendor X. When I changed vendor's name in vendor master, it is not showing new vendor name in contract where as release order of that contract are showing new name. (If I change another vendor's name then it reflect on contract and show new name on it.)
I further checked it and found that the first contract has associated address number field (EKKO-ADRNR) has some value whereas it is blank for other contract and POs.
Can any one please advise how this vendor can get new name ?
Thanks,
Manoj

Yes, I did that too but didn't work.
Thanks for your response.
Manoj
Edited by: Manoj T on Dec 26, 2009 8:21 AM

J2EE Development Component - How to change vendor name

Hi,
While creating a new J2EE Development Component, I didn't change vendor name and have created complete application,
Now I want to update vendor name, can you please help me out how vendor name can be changed in existing application.
Thanks

I have not tried it myself, however:
Try updating the references in your application-j2ee-engine.xml.
You may need to rename your project as well.
Good luck, Roelof

Vendor name Changes

What is the SAP standard process for a vendor that changes it's name? Do you create a new vendor? If you create a new vendor, how do you link the old vendor data?

I am familiar with XK02.
The problem we encounter was an auditor was making selections from an SAP report and selected a 2007 invoice from vendor ####### which displayed the name: "Siemens Healthcare Diagnostics". When the responsible A/P person looked in their Siemens file, they could not find the invoice. Someone remembered that this vendor was actually named Dade Behring Inc in 2007. (1) When is a "name change" really a new vendor account and (2) If a name change is not a new account, is there a field in the vendor master record where we could store the "old name" so that it would be visible to A/P but not appear in places where it should not.

How to change vendor name while payment

we want to modify the vendor name while doing the payment, is it possible,
regards,

hi,
You have have to create a new Vendor with the name you want to make the Payment. Then assign the vendor code in Vendor Master in payment Trasactions .
When you process the payment then the cheque name will be picked-up from the alternate payee assigned. in the vendor master.
Regards
Harish

Supress Vendor name in std report S_ALR_87012103 - Vendors: Items

Hi ,
I am using report 'S_ALR_87012103 - Vendors: Items -> List of Vendor Line Items' to list the vendor open items and in the output the vendor name with address is displayed, I want to supress name and address so that when I download to excel it will easier for me to change the columns.
Than

Try using FBL1N instead of this report, which does not show address.
Regards,
SDNer

Adding vendor name to Position part in report Payment List - s_p99_41000099

HI,
How can I add Vendor Name to detail level of the Payment List report (transaction s_p99_41000099). Change Layout window allows to add Vendor Name to the header level and Vendor Number to the detail level. Users want to export report into Excel and then sort/filter it by vendor name at the detail level.
Is there any way to add vendor name to the list of columns available at detail level?
Thanks in advance.

Resolved by using Check Register

Change DC vendor name

Similar Messages

Maybe you are looking for