Change default application for mp3 extensions

Hello! Thank you in advance to any helpers. This is what I think is wrong:
I recently had some problems with safari, so I downloaded Firefox. In doing that, I think I changed my defaults for certain extensions, namely mp3.
So, all email mp3 attachments are opening in another webpage, instead of iTunes (which was the previous default). I do not have any start up disks as this is a hand-me-down laptop and I cannot figure out how to change the default back.
I tried dragging the file to the desktop, from the email, and it still showed up as a webpage. So I did the whole "get info" and "open using" and "change all" but then the system wanted to change ALL of my itunes files to the .mp3. This was because I had to rename the file (which I know doesn't do much) Any ideas?

well, I can't click on the file because it is in an email message and if I click, it opens to the internet page with a QuickTime audio player. I've checked all my quicktime stuff, too. I don't think that's it. All the songs in itunes library are ".m4a" The only way I was able to even get to the "open with" and etc. was to drag the .mp3 file onto the desktop and it wasn't even an mp3 file at that point, it was a weblink. I was able to open in in iTunes but it's not an audio file. Itunes put it in my podcast section with an exclamation point next to it.

Similar Messages

How do I change default applications for specific extensions like .php

Every time I click on a .php or .html file it opens Adobe GoLive. Every time I click on a .psd file it opens up Photoshop.
I find this to be a complete pain because I rarely work in those applicaitons -- preferring quicker loading applications like Preview & TextWrangler which do most of what I want done with those files.
Is there any way to set my Apple system to default to those applications based on what extension of file I'm trying to open?
Thanks for all of your help.

Hi ahbrobot
Controll-Click on a php-file. Go on "Get info", and change "open with" by clicking on "change all"
Hope this helps
marek

Change Default Application For "All" Isn't Permanent

Hi,
I attempted to search for this problem in the forums but don't have time to drill down and that's why we are all here anyway (i.e. to help each other) so here goes. When I change the default application by clicking "open with" and then specify Adobe Reader and then click the "change all" button, PDF's will open with Adobe Reader until I reboot. Then I have to repeat the entire process.
What am I missing? I have done this like 30 times & can't find any documentation that describes the issue. I Googled the issue but didn't get any hits so I'm not sure if it's a known glitch or if I'm just being a blonde.
Thanks

Hi,
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
Reset Launch Services...
http://www.thexlab.com/faqs/resetlaunchservices.html#Anchor-Reset-47857
Reboot.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
Try your steps one more time if needed.

Changing default application for Pages and Word docs?

I wasn't sure if this was the right place to ask this...
I just got a new computer, running Tiger. I own older copies of Word (which I hate) and iWork (which I love). When I copied my data to my new computer, all my documents defaulted to opening in the new versions of those programs. Furthermore, it won't let me change the program that opens those type of documents.
I open the information on a document, tell it to open in Pages 1.0, and that works fine. But if I try to tell it to "Change All", it just reverts to Pages 2.0. The exact same thing happens when I try to tell Word docs to open in my old version of Word, or with Keynote. I can open my files just fine within the program, but it's getting really, really irritating not to be able to open documents by double clicking.
Any advice? I can't afford to buy the new programs, even if I wanted them (which I don't, in the case of Word).

Julia,
Try Resetting Launch Services, by Dr. Smoke.
;~)

How can I change the default application for a content type?

Running a version of Linux, the default application for PDF files is "Use Document Viewer (default)", which appears to be /usr/bin/evince. I'd much prefer to use /usr/bin/okular; how can I change the default. This question is NOT about how to change the function that is automatically applied when I access a link, in this case "Preview in Firefox", but rather to the default application that I can select when I download a file being viewed in Firefox's previewer.

This is real progress, a solution to the problem as posted. The command:
xdg-mime default okularApplication_pdf.desktop application/pdf
makes okular the default.
However when I added okular to the choices for applications in:
* Edit>Preferences>Applications>PDF
the popup box that appears when I click Download on the preview page changed. The pulldown menu that appears next to "Open with" used to have 3 entries:
# Document Viewer (default)
# Acroread
# Other
Now it has only 2:
# Okular (Default)
# Other
I'd like it to read
# Okular (Default)
# Acroread
# Other
How can I control the entries in this pulldown list?
Also, how can I make the default choice in the popup box be
* Open With <whatever> , rather than
* Save File ?

Change default application to Pages for .doc files?

When I double-click on a .doc file, TextEdit is the application that opens the file. Is there a way to change it, so that Pages '08 is the default application for .doc files?
Thanks!

Select the file (in Finder)>File>Get Info, then under "Open With", select Pages and click "Change All".
Message was edited by: nhuser

How to change default application associated with some mime types?

When we install some new program, for example GIMP, I assume the newly installed program is added to some mime type database, and the /usr/share/applications/mimeinfo.cache file is automatically generated.
Using my example, GIMP will be the default application for all its registered mime types, even application/pdf. I surely don't want this to happen, and I surely don't want to create all kinds of files that GIMP registered and right click on them and choose Properties and then change it in the Open with... tab. I want to systematically de-prioritize GIMP so that it will not override my previously assigned default applications.
I wrote a script to modify the mimeinfo.cache file, and it seems to work great. However, after a reboot or upgrade or something I didn't notice, the default application of application/pdf is reconfigured to GIMP. I think the cache suffix of the file indicates that it is just a cache and may be changed by system unnoticed. So I am looking for a new way to change the default applications.
As far as I know or guess from the phenomena, there should be some system utility that generates the mimeinfo.cache file, it seems to parse all the *.desktop files under /usr/share/applications and register them to certain mime types accordingly. The sequence of the *.desktop files get parsed seems to be related to the time the application is installed, and the newly installed applications seems to be parsed later and inserted in the front of the application list or be parsed earlier and appended to the application list. Is there some place I can change the sequence of the parsing? Or is there some place I can change the behavior of the system utility?
I know that I can populate my ~/.local/share/applications/mimeapps.list to override the system wide defaults, however, I want a more elegant way to this.
Any opinion on this is welcomed.
Last edited by AugustePop (2010-05-14 05:47:15)

Ah, right. Don't know what DE you are on, but in Gnome: right-click a (e.g. pdf) file -> Preferences -> Open with.
All Applications listed there will be available from the right click menu, the marked one will be used on double-click.
errgrh...
I surely don't want to create all kinds of files that GIMP registered and right click on them and choose Properties and then change it in the Open with... tab. I want to systematically de-prioritize GIMP so that it will not override my previously assigned default applications.
I guess what I am trying to propose is this: "de-prioritize" GIMP in its .dekstop file for the types you dont want it to be associated with, and manually add it back in through "Open With" for the file types you want it to be an option. Not sure if this is solving anything for you though
Last edited by hokasch (2010-05-14 10:28:57)

Set default application for *all* users

Hello people, my 1st post here, so forgive me for possible imprecisions, ambiguity, inappropriateness....
When I search how to set/change the default app for opening some type of file I always find the answer "through the getinfo". But doing that, I only change the default application for the current user.
I want to do that for all users of my mac, without repeating the getinfo process for each of them.
Is there any adminstrative tools for doing that?
Thank you.

You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
http://www.rubicode.com/Software/RCDefaultApp/

TextEdit is the default application for my Numbers documents

Although I did not set it to be, TextEdit is the default application for my Numbers documents. It was not always this way, but it is now, and I can't seem to change the default application back to Numbers ('09). For example, when I double-click any .numbers document, I always get the following error message:
The document “xxxxx.numbers” could not be opened. The file isn’t in the correct format. The file might be corrupted, truncated, or in an unexpected format.
See: http://screencast.com/t/P5OSAJAq
Therefore, whenever I want to open a.numbers document, I must drag it to the Numbers application icon or right-click and select “open with” and select Numbers from the list of applications. Although this works fine, it creates a couple of extra steps that I would prefer not to do
My first inclination was to “Get info” and change the “open with” back to Numbers for all .numbers documents.
http://screencast.com/t/TMJwBmTOkHN
http://screencast.com/t/LAnPsbeGdB
However, selecting Numbers as the default application will not persist after clicking “change all.” Rather, it reverts back to TextEdit. Tony, this is the only way I know how to select the default application for a document type.
Is there another location where I can set/reset the default application?
Thanks!

I guess that there is at least one database used by the Operating System which is corrupted.
Run a maintenance application : MAINTENANCE is a free very good one available thru :
www.titanium.free.fr/
and ask it to repair permissions,
delete caches
repair database Launch Services.
Yvan KOENIG (VALLAURIS, France) jeudi 26 mai 2011 15:51:58
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

"change all" unavailable to change default application

I've been irritated that Preview constantly wants to open all of my image and PDF files. I've had to manually change the default application for each individual file (not fun when I have hundreds, possibly thousands of these files). I did a search to see how I could select Adobe Photoshop and Acrobat as my default applications, and discovered that there is supposed to be a "change all" option available for the "get info" window. I do not have this option at all.
I did the obvious things: I selected "other" under the "get info" dialog, and the application I wanted the files to default to. "Change all" did not appear. I tried the forum's advice and reset my launch services, to no avail. I've tried Disk Repair, and still the same issue.
I'm running 10.4.8 on a Dual 2Ghz G5 (pre-Intel), and Adobe Photoshop CS2 (9.0.2) and Acrobat 7.0.8. Also, the version of Preview I have is 3.0.8.
G5 Mac OS X (10.4.8)

Change All is a clickable button that should appear below the drop down menu from which you select the desired application. If the button does not appear then perhaps you have a corrupted installation of OS X and should consider doing a fresh installation.
In addition to doing Disk Repair your should also Repair Permissions.
As an alternative you can download a freeware preference pane called RCDefaultApp which is used to set associations for applications and many other defaults. You will find it at www.versiontracker.com or www.macupdate.com.

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

How do you create a save as default folder for MP3 files used Captivate text to audio voices files?

Hi Ed
Thank you for contacting me, however I already know how to save text to
audio files via timeline using the Export feature.
So my question was not entirely clear and I apologize for that. To explain
further, whenever I save a text to audio file, captivate takes me to a
default save as folder where I then have browse back to my production
folder where I am keeping all my Txt to Aud files. This is very tedious
process when you have alot of files to save. So my question was is there a
way to configure captivate so I can make my production folder the default
file for whenever I save a Txt to Audio file through Export feature that
the system automatically takes me to that production folder, and I am
spared the long tedious process of saving the file manually to the
prodcution folder I want.
I have copy the pathway to the production folder in the URL filed in the
Save As dialoge box and that workaround as cut the work down but I still
have to paste that URL field to point the file to the right folder. So it
would be nice if I could do everything automatically. Microsoft makes this
capability in their MS Office applications, so I was thinking Adobe might
do the same thing. Your help with this would be appreicated,
Thanks
Merrill Roberts
Sr. Training Specialist
SunGard Availability Services
Direct 925-831-7730
Mobile:415-215-9280

Mail default applications for opening attachments

I recently had to install Open Office in order to be able to open those kinds of documents produced by my colleagues. The only problem is that it now becomes the default application for opening .doc, .xls and .pps documents. I have changed this using command+i on each type and making sure I selected the "change all" so that each app opens under it's appropriate iWork program, but I still have a problem with Mail.
In Mail, if I get a .doc attachment, clicking on it automatically launches Open Office. Worse, when I right-click and choose "open with", Open Office is listed twice at the top of the list!
I loathe Open Office with a passion, not least because of this situation, but also because it frequently crashes and is still bound to using xterm. Nevertheless, I have to keep it as my colleagues are all on Ubuntu Linux and insist on using it for spreadsheets (to be honest, Open Office is okay on Linux).
If only iWork apps could open OpenOffice documents... ah well.
Any solutions would be most welcome!

Here's how you can set your preference for which application to use on a given file type:
1. select a file of that type
2. press CMD-I to bring up the file information
3. Click on the little triangle to expand the "Open With" section
4. Select the application you want to use for that type of file
5. Click on the "Change All" button
This has worked for me in the case where I have Parallels Desktop installed and it wants to use my Office 2000 installation under Parallels to open MS Word & Excel attachments. I changed these to be opened by NeoOffice, and it works both from the finder and when opening attachments in Mail.
I hope this helps...

How do I change default software of an extension?

how do I change default software of an extension? For exemple, I want do change .dwg to a recently installed software.

Select a file of that type, choose Get Info from the File menu, change the Open With setting, and then the default for that file type.
(72647)

Change default application?

Is there a way using ARD to change the default application for a files. For example make PDF's open in Acrobat rather than Preview on the remote computers?
MDA

Highlight a pdf file you want to have opened in Reader and press the Apple (command) key, plus i which brings up an info panel. One of the items in that panel is "Open with." Your defualt probably shows Preview so click the button and that will reveal other applications. If Adobe reader is not one of those, at the bottom is "Other."
Also, below that button is another marked "Change All" which will make the new selection the default for all such files.

How to change default thresholds for some metrics of all targets.

Hi!
We have a lot of servers which have to work hard.
So, our OEM very often generates messages like these:
"EM Alert: Critical:dbsora90.tsb.kz - CPU Utilization is 99.95%, crossed warning (80) or critical (95) threshold."
"EM Alert: Critical:dbsora94.tsb.kz - Disk Device c8t60A9800043346C384C344A4A63516D6Ad0(ssd4) is 99.7% busy."
"EM Alert: Critical:dbsora94.tsb.kz - CPU Load (Run Queue Length averaged over 5 minutes) is 20.78, crossed warning (10) or critical (20) threshold."
I need to change default tresholds for mentioned metrics but I can't their defenition in SYSMAN.MGMT_*-tables or suitable settings in OEM GUI.
And I have no time to edit treshholds manually for each target. )

Modification of Metric Thresholds (as this is what you are referring to), should be done using the Metrics and Policy Settings link (to be found in the Target Home page).
Don't mess around with the SYSMAN tables!
Best thing to do here is to start using Monitoring Templates for this.
Check:
Oracle® Enterprise Manager Concepts
11g Release 11.1.0.1
http://download.oracle.com/docs/cd/E11857_01/em.111/e11982/toc.htm
Regards
Rob
http://oemgc.wordpress.com

Change default application for mp3 extensions

Similar Messages

Maybe you are looking for