Change default communication port for BITS

We are currently using ConfigMgr2007 (native mode). We currently have a global GPO wihich is throttling BITS to 56kpbs during current business hours (8am-5pm). It has been suggest to use QoS to controll the amount of traffic used by SCCM distributions
to clients. Seeing the BITS uses HTTP (80) and HTTPS (443) by default, is there a way to change the default ports used by BITS.
I did find the following article (About Configuration Manager Client Installation Properties)
that there are two setting which can change the default ports.
CCMHTTPPORT=
CCMHTTPSPORT=
Is there any other methods to change the Default port for BITS communication as a whole.

Thanks Kent and Jason. I know I posted in the ConfigMgr forum and you pointed my to the proper documentation. We have non-Microsoft email archiving product which utilizes BITS which is the reason for the general question regarding BITS.
I did not see a dedicated forum for BITS so I posted here.
The documentation as suggested by Kent will assist with making changes for ConfigMgr if necessary.

Similar Messages

Client communication port for workgroup servers

We have SCCM 2012 R2 Single Primary Site in intranet. We have PKI with ADCS 2012. We are in process of mirating to HTTPS communication using certificates. We have few servers in workgroup and we plan to manage those servers with configuration manager by
manually installing client and specifying smsmp=sccm fqdn. for lookup management point.
Can we change client communication port for these servers?
For successful client communication do we need to open any ports except 443 in firewall?
What all ports needed to be open in this scenario?

Hi,
You configure the Communications port for the MP in the site so they must use the same ports, you can configure alternate ports so if it cannot communicate on port 443 it tries the next port.
http://technet.microsoft.com/en-us/library/gg712276.aspx
443 is sufficient, the client will also try to communicate on port 10123 for Client Notification,
http://www.google.se/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CCsQFjAA&url=http%3A%2F%2Fblogs.technet.com%2Fb%2Fconfigmgrteam%2Farchive%2F2012%2F09%2F27%2Ffast-channel-for-system-management.aspx&ei=1dAhU7qqOIL8ygPb1IHQAQ&usg=AFQjCNF4_G2sZBMbDDtJa95LBx7EYYBrRw
But it should fallback to 443 if not available as well.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Just a suggestion..........
Download Thunderbird. Easier to use when it comes to what you want to do w/your emails.

Defaulting Communication language for BP

Hi All,
Any idea how default communication language for BPs in CRM 5.0. Please let me know.
I have found lot of threads that speak abt a BAdi..but none of them have mentioned the BAdi name. Please let me know the BAdi.
regards,
Sameer Ahamad

Hi Sameer,
This is what you need to do :
1. Look at structure BUSDEFAULT. This has some fields that can be defaulted on the BP. If you want to default one of these fields, then
a)create a new Z module , e.eg : Z_bupa_set_default. In this, create a structure of type BUSDEFAULT, fill it with the fields you want and then pass this strucutre to FM BUP_BUPA_FIELDVALUES_SET.
b) Register your Z module in event ISDAT. For this, go to txn BUS7, choose event ISDAT, and register this Z module.
Now, whenever you create a BP in transaction BP, your Z module will be called before preparing the screen and the UI will contain the fields that you filled in the busdefault structure.
In case you need to default a field that isn't present in BUSDEFAULT, you need to make a modification and add that field to the standard structure BUSDEFAULT. This is the only way. It will solve your issue, i 've tried this and verified.
Hope this solves your problem.
Cheers,
Rishu.

Changing Default SMTP port in SAP Portal/Web AS java 6.40

Hi all,
We are configuring notification service in SAP Portal 6.0 with SPS 15. The SMTP server not using 25 port which is default for SMTP. when the server is trying to send notification it is pointing to IP address and 25 port. HOw can I change the default port to custom defined port in Portal/Web AS Java.
Thanks in advance.
regards,
Kishore.

Hi,
may be that Im a little bit to late, but for the next one who has the same problem the solution could be interesting.
You can change the default smpt port on Web AS Java in the server parameters of the java virtual maschine.
Open the SAP J2EE Config-Tool. Goto cluster-data | instance_<instance-id> | server_<server-id>. In the tab General insert unter Java parameters the line
-Dmail.smtp.port=<port> where <port> ist the port number of your smtp server.
Testet with SAP NetWeaver Portals / SAP NW 04s and SUN Java-VM but should also work with SAP NW 04.
Greetings
Jens

Changing default SSH port 22

I am interested in making my computer more secure. I have my computer set up as a web server and also have FTP and Remote Access services enabled. Last week I had a security breach. Someone had placed a folder in my web directory which basically spoofed the eBay login page. I have since disabled FTP and Remote Access services. After doing so, there have been no more intrusions to date.
Since this incident I have been conducting research on the Web about tightening up security on my home computer. One of things suggested is changing the default port for SSH. What is the process involved in changing the port?
Any assistance is appreciated.
Roland

The default port numbers of the services stands in the file /etc/services. When you activate an service such as ssh, the service bind the port number, which stands in these file and listen at this port.
You could change the portnumber with: sudo vi /etc/services.
When you make changes in these file, is it better, when you comment the default entries and make new entries with your portnumbers.

How do I change the listener port for APEX on XE

Hi all,
I did a default install of XE onto a Linux box which is my DMZ server. The default port for the listener is 8080, however I have since found that port 8080 is the port for proxy servers and therefore I cannot access APEX on my DMZ site from behind a client's proxy server.
Is there is simple way to change the listener to port 80 for access to APEX.
Many thanks
Bryan

Hi Bryan,
See http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/network.htm#BHCBABJB
Hope this helps,
Andrew
http://www.apexskins.com

Changing message server port for ABAP+Java Instance

Hi,
We had change our message server port for the Java instance from 3607 to 3667.
We did this using the j2ee config tool. We also verified this information through the console config.
But when we look into system info URL using the URL as shown below, we still that the old message server port is being used. We have recycled the instance couple of times , but does not seem to help.
http://dfudsbw1.dfna.corp.dom:50700/sap/monitoring/SystemInfo
Any ideas where else we have to change the port no. for the message server

Hi guys,
I solved this on my own with documentation help from SAP.
I had to change the port no. in the Global dispatcher and Global server area as well.
Please see details from SAP below.
"Message Server: Changing Ports/Hosts shows which areas need to be adjusted if
the port or host of the message server changes. Ports are, of course, changed in the
instance profile of the Central Services instance. In the example, the port 3677 and
the HTTP port 8177 have been set, and the new host is called twdfxxx. You need to
use the Config Tool to set these values. For each instance, you need to maintain the
corresponding values for the Message server host and Message server port on the
Message Server and Bootstrap tab page. The connection details for dispatchers or
servers to the message server are maintained in the Cluster Manager. As shown in the
figure, the ms.host and ms.port are maintained, respectively, in the Cluster Manager
with Global Dispatcher and the Global Server. After you have maintained all of the
parameters, you can start the instances."

Changing default target namespace for a JPD

Hi,
Is there a way in Workshop 8.1 to change the target namespace used when a WSDL
is generated from a JPD? Currently, Workshop uses http://www.openuri.org. I
have tried to use the @common:target-namespace annotation in my JPD, but that
appears to only be valid for JWS files. Is there a way to globally set the default
target namespace for an entire Workshop project?
Thanks,
Nick

And to just make it more clear :
and here is the SAP help on the subject:
Transport Layer in ABAP Workbench
The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
The packages in each development system are grouped into one transport layer.
The transport layer determines whether objects are assigned to a local or transportable change request.
Use
Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
You can define at the most one consolidation target for each SAP System and transport layer.
When you create a package, it is assigned the standard transport layer of the SAP System.
If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of Release 4.0A and cannot be maintained.
Best regards,
Menelaos

Changing default page margins for Web Intelligence

Is it possible to change the default page margins for new Web Intelligence documents. The default size is 76px which most people find exceedingly large.
The defaultconfig.xml file can be modified to specify default fonts, page size, orientation, etc. Can anything be done to this file to change the default page margins as well?
Any help would be appreciated ...
Thanks

Hi James,
Following information might be helpful for answering your queries.
An ER has already been raised for the functionality yo want and the ER# Id is ADAPT01081135
State
Submitted
Origin
Customer
Date Entered
2008-05-23 12:29:54
Subject
XIR2: Webi: Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
Current Functionality
The default 'Page Layout Margins' are set to 76px each for a new Webi report.
Create a new Webi report - Go to Page Properties - Page layout - By default, Top margin=76px, Bottom margin=76px, Left margin=76px, Right margin=76px.
Requested Functionality
Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
Expected Added Value
There should be an option in Webi / Infoview to set any property value to any required default value. This should be independent of the user, because it may differ from user to user.
Found In Product
Business Objects Enterprise.
Found In Product Version
XIR2.
Found In PFA
Web Intelligence
B) use SDK kit (this is only a suggestion though)
https://www.sdn.sap.com/irj/sdn/businessobjects-sdklibrary
https://boc.sdn.sap.com/codesamples
You would find almost everything here that BusinessObjects supports (about the SDKu2019s). You could also use the forums to check if anybody have already done what you are looking for)
Regards,
Sarbhjeet Kaur

What prevents being able to change a the port for a website?

On the Web service in Server Admin I noticed that if I change the PORT for certain virtual domains from 80 to ANYTHING (like 8080, or 443) when I save, the Server Admin reports the error:
"A service has encounted an error."
And it does not accept the change. But only on 3 of my 5 domains!
What's odd is I have 5 completely different domains listed under Sites (all are root domains, no host names; eg, x1.com ... x5.com), and I can change the website's port for the 1st and the 4th domains in the list only.
The websites all work.
Anyone guess why some websites I can change the port, and others I cannot?
(Note: I started off with all websites saying the IP was x.y.x.z. I also tried to change that, and the same two websites that i can change the port will let me change the Ip to "any", and the ones that I can't change the port won't let me change the IP to 'any' either.
One off thing -- maybe related -- is that when I successfully change, say, the port on domain #1 or domain #4, after I click "save" it refreshes the screen, Server Admin has skipped to show the info on last domain.
My servers are all hosted out of their own subdirectories of the /library/websever/documents directory.
Another idea is, is there a manual way I can change JUST the port setting to see if th service can operate that way?

PS The server is 10.3.9

Changing default refresh time for the UWL.

Hello,
I am trying to change the Default refresh time for the UWL(workflow inbox) for all the users before they personalize or save the refresh time, Would changing the refresh time in the .xml file work or is there any other way to do it? Thanks,
Aniketh R.

We have had all sorts of issues with this as well. I have been unable to find a solution that works as of yet. From my own debugging it seems as if RP is trying to parse the pasted text as logo's, fields etc.... I am looking at potentially using a script w/ set interval to "clean" the clipboard data but this isn't a perfect solution for numerous reasons.
What is happening to your letters when the users paste? Our letters actually become unusable after a plugin save. So I am actually very interested in the answer to this question!

How to change default audio device for gnome?

My laptop has an integrated sound card, but I lately got a USB headset (headphones+mic, which works with linux btw, I tested it with GizmoProject which lets me choose which /dev/dspXX I want): http://www.geeks.com/details.asp?invtid=U200&cpc=SCH
So, how do I change the default audio device for *all* desktop sounds to the headphones? I tried the two gnome sound properties, and when I select the headset device they let me configure it but ALSA still uses the internal audio card. Why isn't there a way to easily select which device you want for your sounds as there is for BeOS, Windows and OSX?

Eugenia wrote:Well, it's still not good enough.
We can't satisfy everyone. What you want is a corner case. For most people ALSA and dmix works appropriately, and that is what esd uses by default. We cannot document and automate every configuration possible. That's up to the users.
However, if you don't want to restart gnome, try the below... I make a few assumptions, but even if they're wrong, they're hardly difficult to work around.
Just copy the /etc/esd.conf to ~/.esd.conf, make your change, then do killall esd. Presumably gnome will restart esd, and it ought to read your local config. If it doesnt, start it yourself.
Feel free to write a script that automates this, or document it on the wiki.
I have to restart Gnome to get this thing working. Other OSes *automatically* can use an alternative device. But if I change ESD, I will have to restart Gnome, no?
Well, if you try my suggestion above, no. You can restart esd yourself. And that's what all the other distros do, except with some fancy GUI.
James

Change default video player for iPad

Is there any way to change the default video player for iPad?
For instance, to be able to see mpeg, mkv videos, etc.

Did you figure out how to do it ? I have some movies copied over from a NAS into FileExplorer app on my ipad, but it uses quick time as player and it does a lousy job with mkv files.
Note: Jailbreaking is not an option

Communication port for JCo

Hi All,
I am about to install JCo in Solaris server. I want to confirm one thing.
Which is the port I need to open up for JCo to communicate to SAP server?
The version of JCo is "SAP JCo 2.1.8 ".
Is there any documents regarding the communication port?
All inputs are welcome
Regards
George

I think you need to open 3200 and 3300.
The following is the list of all related ports:
sapdp## 32##/tcp # SAP Dispatcher.       3200 + System-Number
sapgw## 33##/tcp # SAP Gateway.          3300 + System-Number
sapsp## 34##/tcp #                       3400 + System-Number
sapms## 36##/tcp # SAP Message Server.   3600 + System-Number
sapdp##s 47##/tcp # SAP Secure Dispatcher 4700 + System-number
sapgw##s 48##/tcp # SAP Secure Gateway    4800 + System-Number
sapgw97 3397/tcp # SAP Oss
sapgw98 3398/tcp # SAPcomm
sapgw99 3399/tcp # SAP EPS
sapdp99 3299/tcp # SAProuter
Dennis

Change default communication port for BITS

Similar Messages

Maybe you are looking for