Change Default Movement Type in a PM Order

Dear Members,
I configured an order type (from a Maintenance Order Category) and the default movement type for this order type is 261. However, the movement type I want for this order type is 311 (transfer posting - one step). Is it possible to change the default movement type from 261 to 311? If yes, please explain how I will go about this.
Kind Regards,
Dada

Hi,
I have configure the same for plant Maintenance order, The problem is I am facing - system create reservation for the same maintenance order, but in that reservation destination storage location is missing. How to resolve this issue. I cannot use this reservation without destination storage location.
Regards
Aniket Chavan

Similar Messages

Change default Movement types at COR6N

Dear All
Can we change movement type(s) at goods movement of confirmation?? there is 101 for GR and 261 for GI, I have to change 101 to 103.. if yes please let me know how??
Thanks
Navaid

Use t-code OPKA. Package for Production order and process order is CO. However, it will apply to all order types at all plant. This is not recommended.
If you want to post GR to block stock for some cases, change the stock type in Goods receipt tab to block stock in process order manually. Give it a try.

Changing PO document type for automatic purchase order opened by GR

Hi to all,
You know, there is a feature to customize automatic PO creation upon GR. The system uses "NB- Standart Purchase Order" document type. But, i need to use a different document type (like ZNB) that i have copied from standart one.
How can I change default document type for PO in customizing. Or, am I able to do that in customizing.
Thanks,
Hakan.

Goto OLME --> Define default value for document type
here for T-code MB01 - cahnge to your doc type
Read that documentation for more info

Balance carryforward & Default movement type

Dear collegues,
We have a default movement type defined in configuration (Master Data > Subassignments > Default Values) that works as desired for all tasks except one: Balance Carryforward.
Every time we need to perform a BCF, we are forced to change the default movement type in costumizing to the desired one. Also, no other tasks should be performed at the same time as BCF, otherwise default movement type will be incorrect.
How can we solve this problem? Is it possible to define a sepecific movement type to the BCF task?
Thanks in advance.
Célia Guerra

Each movement type master data can be assigned a carryforward movement type. If movement type master data has the carryforward movement type the same as the default and the breakdown category for the item being carried forward does not allow the default movement type, then errors will occur with BCF.
It is suggested that the movement type master data be analyzed for this situation and either the movement type master data be changed to use a different movement type for carryforward, or the corresponding breakdown categories be changed to allow for the default movement type.

Movement Types - how to change determined Movement Types in Delivery Creati

hi,
Is there any way "material movement type" can be changed once its been determined in the delivery, or durin delivery creation (after creating the sales order)
is it possible to override the material movement type creation, (apart from the control which we get by the schedule item category field).
Is there any way to change the material movement type in a deliver document ?
thanks any help would be truly helpful.

Hi Authi
That could be correct. If all the conditions are known at the time of sales order then you can try and use the MV45AFZZ and form to move data into VBEP and move a different schedule line category that has a different movement type. Please check this option and it would work. We used it in a couple of situations in our client here. You need to configure and assign the schedule line category as manual one in the config.
Reward if this helps.
Thanks

Default PR type for MRP (planned order -- PR)

Hi Expert,
Is there any posibility to set default PR type for planned order - PR conversion from MRP?
in SAP standard, PR type is NB, we have configured specific PR type, let say PRM. The purpose is we do not need to change NB to PRM while converting the planned order into PR.
Pls help.Thanks
Rgds,

Hi Gurus,
This is my first post in this forum. Have been trying to search this forum for my case all day and found some answers but when i implemented it in my SAP , the answers didn't work.
The case is:
When i try to convert Planned Order to PR through tcode MD15/MD16, the system will propose PR Document Type NB as default. In my company we don't use that NB PR type. We have another 10 customized PR Type and one of them is for Replenishment. I'd like to set this ZR09(Replenishment) PR Type as default and it's not possible to choose another PR Type.
I have read several answers and implemented them, for example:
1. OPPR with MRP Group 000, and I found no indicator except Scheduling/Doc Type. I typed ZR09 in field Doc Type SPO but in MD15/MD16 other PR Types still appear with NB as default.
2. SPRO-MM- Consumption based planning u2013Procurement Proposal u2013 Define Order Profile or SPRO-PRoduction - MRP- Procurement Proposal - Planned Order - Define order Profile, when creating new entries with Object Type Planned Order/PR still canu2019t find my customize PR Type in field Order Type. Field Order Type only consist of 2 digits order type such as NB,LA,RS,KD,KB,PE,PR,VP. No place to choose PR Type ZR09 or other customized PR Type.
Can anyone help my case?
Thanks and regards,
IC BUMA

Default movement type

How to make movement type 101 always to defualt in MIGO.
Whenever if we open MIGO is should be defaulted.
For ex: if we change mvt type 102 for some reversal.. whenver we open MIGO screen it defult movement is 102. It should be made to 101. How can we achieve this.
Can anybody please suggest?
Thanks,
Bhairav

In MIGO , it will show you the Mvt type for the Last Performed activity...
If you want to set default
Spro>MM>Inventory Management and Physical Inventory>Settings for Enjoy Transactions>Settings for Goods Movements (MIGO)>
Settings for Transactions and Reference Documents
here Select MIGO click Transaction/event
then select Transaction/event then click ref document , here you can set default Mvt type for reference document..

How to Change default format type in output device

Hi all,
I want to change the default format type from X_65_80 to another for all users.
Can anyone tell me the process.
Platform: SAP ECC 5.0 + Oracle 9.2.0.7 + HP UX
Thanks in advance
Regards
Eshwar

Hi Sam,
Thanks for the reply.
Where can I select the required format type as default for all reports.
I have checked in SPAD -> Extended Admin -> Device Types -> Format Types. But I did not find any option to set the format type as default for all reports for all users.
Regards
Eshwar

Problem in Goods receipt of serializedspare (Movement type: 262) on Maintenance Order

Dear Experts,
When i create a maintenance order for equipment and assign serialized spare parts With negative sign and valuation type damaged then i go to T-code MIGO to receive the spare parts (Movement type 262), the below error message has been showed up. This is because, I want to receive the spare part into the warehouse with valuation type (Damaged) differ from the valuation type of issuing it at the first time (Under test)
So is there a way to receive a spare part with the same serial number on a different valuation type than that one it has been issued upon it firstly.

grating jagdeep
this screen shoots for what you have asked for

Movement type in third party order

dear expert
pls tell me what is the movement type is used in third party order.
from
vicky

There would be no movement type for third party sales if the vendor is sending the material directly to the customer.
If you think logically the movement type is "the actual movement of goods" that is mapped in sap when we do the PGI.
Since we are not doing any delivery in the case of above explained(i.e. material from Vendor --> Customer ),there would be no chance to think about movement type.
So if you check the standard schedule line category CS in VOV6, you cant find any movement type assigned to it(fact is thats not at all required in this case).
There is also one more case in third party sales where vendor sends material directly to the company, in this case its company's responsibility to send that material to the customer(i.e.Material from Company-->Customer).
Here company will be doing delivery and PGI(actual movement of goods starts here) and they will invoice to the customer is well.
In this case we need movement type.
The movement type to be used in this case is 601 and standard schedule line category is CB. If you check CB thro VOV6 , you will be able to find the movement type 601 here.

F-44 ...change default doc type

Good afternoon Experts,
I'm trying to accomodate a request by users to have the default doc type on F-44 tcode changed. I tried first to go to OBU1, but F-44 isn't listed here and I cannot add an entry.
Any help would be greatly appreciated.
Matt

The easiest way I've found is: go to IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Open Item clearing -> Define Posting Key for Clearing Items
Then double click on clearing transaction UMBUCHNG and change the document type A/P to whichever you want. That way next time you use F-44 it will post with the doc type you entered. Same works for F-32 by changing the A/R Document type and for F-02 at G/L Document type field.
Regards,
Jorge

Restriction of Reverse GI - 262 movement type after GR for order with 101

Hi all,
How to Restrict Reversal of Goods Issue by 262 for a Production order after Goods Receipt (GR-101) for Porduction order is posted.
eg will make more clerity.
Step 1- After creating Production for Finished Material, I post Goods Issue GI against production order with 261 movement type.
Step 2- Confirmed the Production order for Finished Material.
Step 3- Make GR for Finished Material with 101 movement type.
Now If i want to Post Reversal of the Goods Issue posted previously with 261 movement type for Semifinished Material, system should not allow to do that, but system allows me to do same with 262 movement type.
as the same material i already issued against production order & is consumed. so if some one want to makes Reversal GI with 262, it should not allow.
Please help.
Thanks in advance.

Hi,
Go through the following steps-
1) Tcode BS22
2) Select CNF and double click on it.
3) New entry
4) RMWA- Goods Movement set as prohibited. save
Arun

Change of Movement type for Return delivery of Goods Issue doc in config

Hi SAP Gurus,
I am doing return delivery of goods issue document.then the system automatically pick the movement type
Like Example i am doing return delivery for Goods issue 201,the system should pick 202 but instead of 202 its picking 902 movement type which i defined.
Where exactly i have to change in configuration please let me know....
Thanks,
Sivakumar

In OMJJ, check the reversal movement maintained for the one your facing the issue.
If any further clarification is required, revert.
If helpful award points
Regards,
Vivek

Default Movement type in inbound delivery

Dear Experts ,
Can anyone please tell me where in configuration is the movement type assigned against an inbound delivery .
My requirement is to change the defalut movement type 101 for GR against inbound del to 103 , but only for a particulat PO document type.
Eg PO doc type Z001 will have the defalut movement type in GR against inbound delivery as 103 .
for all other document types the movement type will be 101 .
Please suggets if it is possibel & how .
Regards
Anis

Hello Anis,
Generally, we go for movement type 103 for bolcking the goods reciept. As per SAP practice,we put the material in blocked stock, if we want to carry out inspection or before taking it into unrestriceted stock. Either way, we found a material which is faulty and we put it to blocked stock to return it back to vendor.
Why you want to go for blocked stock, during reciept, as generally blocked stock movement type is used after Goods reciept are done based on above explanation.
I guess, still if you want to use 103, you can do this either for particular vendor or for a particular material.
To do it at vendor level, you can mark blocked stock indicator in vendor master record, either for material you can set this indicator in material master record.
BR,
Tushar

Using movement type 551 in Production Order

Hi all
I want to do a mvt type 551 of components to the Production order but it allows me only a 261 movement type. Is there a way we can do that.
thanks

Hello John,
551 is a transaction for scrapping inventory against a cost center. In a way, 261 is doing the same txn by moving inventory from stock to Process order.
Why are you trying to perform a 551 against a process order? There might be another solution to the business issue.
Regards,
Anand

Change Default Movement Type in a PM Order

Similar Messages

Maybe you are looking for