Change default Movement types at COR6N

Dear All
Can we change movement type(s) at goods movement of confirmation?? there is 101 for GR and 261 for GI, I have to change 101 to 103.. if yes please let me know how??
Thanks
Navaid

Use t-code OPKA. Package for Production order and process order is CO. However, it will apply to all order types at all plant. This is not recommended.
If you want to post GR to block stock for some cases, change the stock type in Goods receipt tab to block stock in process order manually. Give it a try.

Similar Messages

Change Default Movement Type in a PM Order

Dear Members,
I configured an order type (from a Maintenance Order Category) and the default movement type for this order type is 261. However, the movement type I want for this order type is 311 (transfer posting - one step). Is it possible to change the default movement type from 261 to 311? If yes, please explain how I will go about this.
Kind Regards,
Dada

Hi,
I have configure the same for plant Maintenance order, The problem is I am facing - system create reservation for the same maintenance order, but in that reservation destination storage location is missing. How to resolve this issue. I cannot use this reservation without destination storage location.
Regards
Aniket Chavan

Balance carryforward & Default movement type

Dear collegues,
We have a default movement type defined in configuration (Master Data > Subassignments > Default Values) that works as desired for all tasks except one: Balance Carryforward.
Every time we need to perform a BCF, we are forced to change the default movement type in costumizing to the desired one. Also, no other tasks should be performed at the same time as BCF, otherwise default movement type will be incorrect.
How can we solve this problem? Is it possible to define a sepecific movement type to the BCF task?
Thanks in advance.
Célia Guerra

Each movement type master data can be assigned a carryforward movement type. If movement type master data has the carryforward movement type the same as the default and the breakdown category for the item being carried forward does not allow the default movement type, then errors will occur with BCF.
It is suggested that the movement type master data be analyzed for this situation and either the movement type master data be changed to use a different movement type for carryforward, or the corresponding breakdown categories be changed to allow for the default movement type.

Default movement type

How to make movement type 101 always to defualt in MIGO.
Whenever if we open MIGO is should be defaulted.
For ex: if we change mvt type 102 for some reversal.. whenver we open MIGO screen it defult movement is 102. It should be made to 101. How can we achieve this.
Can anybody please suggest?
Thanks,
Bhairav

In MIGO , it will show you the Mvt type for the Last Performed activity...
If you want to set default
Spro>MM>Inventory Management and Physical Inventory>Settings for Enjoy Transactions>Settings for Goods Movements (MIGO)>
Settings for Transactions and Reference Documents
here Select MIGO click Transaction/event
then select Transaction/event then click ref document , here you can set default Mvt type for reference document..

How to Change default format type in output device

Hi all,
I want to change the default format type from X_65_80 to another for all users.
Can anyone tell me the process.
Platform: SAP ECC 5.0 + Oracle 9.2.0.7 + HP UX
Thanks in advance
Regards
Eshwar

Hi Sam,
Thanks for the reply.
Where can I select the required format type as default for all reports.
I have checked in SPAD -> Extended Admin -> Device Types -> Format Types. But I did not find any option to set the format type as default for all reports for all users.
Regards
Eshwar

Movement Types - how to change determined Movement Types in Delivery Creati

hi,
Is there any way "material movement type" can be changed once its been determined in the delivery, or durin delivery creation (after creating the sales order)
is it possible to override the material movement type creation, (apart from the control which we get by the schedule item category field).
Is there any way to change the material movement type in a deliver document ?
thanks any help would be truly helpful.

Hi Authi
That could be correct. If all the conditions are known at the time of sales order then you can try and use the MV45AFZZ and form to move data into VBEP and move a different schedule line category that has a different movement type. Please check this option and it would work. We used it in a couple of situations in our client here. You need to configure and assign the schedule line category as manual one in the config.
Reward if this helps.
Thanks

F-44 ...change default doc type

Good afternoon Experts,
I'm trying to accomodate a request by users to have the default doc type on F-44 tcode changed. I tried first to go to OBU1, but F-44 isn't listed here and I cannot add an entry.
Any help would be greatly appreciated.
Matt

The easiest way I've found is: go to IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Open Item clearing -> Define Posting Key for Clearing Items
Then double click on clearing transaction UMBUCHNG and change the document type A/P to whichever you want. That way next time you use F-44 it will post with the doc type you entered. Same works for F-32 by changing the A/R Document type and for F-02 at G/L Document type field.
Regards,
Jorge

Change of Movement type for Return delivery of Goods Issue doc in config

Hi SAP Gurus,
I am doing return delivery of goods issue document.then the system automatically pick the movement type
Like Example i am doing return delivery for Goods issue 201,the system should pick 202 but instead of 202 its picking 902 movement type which i defined.
Where exactly i have to change in configuration please let me know....
Thanks,
Sivakumar

In OMJJ, check the reversal movement maintained for the one your facing the issue.
If any further clarification is required, revert.
If helpful award points
Regards,
Vivek

Default Movement type in inbound delivery

Dear Experts ,
Can anyone please tell me where in configuration is the movement type assigned against an inbound delivery .
My requirement is to change the defalut movement type 101 for GR against inbound del to 103 , but only for a particulat PO document type.
Eg PO doc type Z001 will have the defalut movement type in GR against inbound delivery as 103 .
for all other document types the movement type will be 101 .
Please suggets if it is possibel & how .
Regards
Anis

Hello Anis,
Generally, we go for movement type 103 for bolcking the goods reciept. As per SAP practice,we put the material in blocked stock, if we want to carry out inspection or before taking it into unrestriceted stock. Either way, we found a material which is faulty and we put it to blocked stock to return it back to vendor.
Why you want to go for blocked stock, during reciept, as generally blocked stock movement type is used after Goods reciept are done based on above explanation.
I guess, still if you want to use 103, you can do this either for particular vendor or for a particular material.
To do it at vendor level, you can mark blocked stock indicator in vendor master record, either for material you can set this indicator in material master record.
BR,
Tushar

Changing Default Movie Size

Due to some limitations, i need to change the default movie size form 720x480 to something like 240x180. I haven't found a way to do this.
Does anyone have a suggestion?

Use a different program, and don't expect to be able to create a DVD... as far as I know, that size is not supported by the DVD specification

Changes in Movement types

After creating the our own custom movement types, system not allowing to change or delete some setting
example in "Update control in WM movements" or "Account Grouping"
I want to change quantity and value update options in "Update control in WM Movements"

Hi,
While creating new movement type you cannot change the existing ie) Copied Update control in WM movements" or "Account Grouping parameters and also quantity and value update options in "Update control in WM Movements ....
Only you can add some fields in Enjoy field Selection (that to some fields only) and Create Auto PO and Auto. Sto. Loc like that...
Rewrds if useful
Regards
S.Baskaran

Change default document type in transaction F-47

Hi guys,
any idea how may I change the default value (not on user level) of the document type in transaction F-47.
Thanks and regards

Use transaction OBU1 (path: IMG Financial accounting / general ledger accounting / business transactions / G/L account posting / Carry out and check document settings / default values)

Change default file types

I have been using Adobe Acrobat to view PDF's and it stoped working correctly. I have decided to use Preview because I don't tend to use Adobe's advanced features. But, I can't seem to get Finder to stop associating the PDF file type with Adobe Acrobat. I tried deleting Adobe Acrobat but Finder simply will not open PDF files. I tried the open with....and checking always use this as a default application, but it doesn't work. Is there some file or app that can edit file types and default applications?
Thanks,
Lee

Your personal preferences for applications/files associations are stored here:
"/Users/yourname/Library/Preferences/com.apple.LaunchServices.plist"
If that file has become corrupt then it wouldn't reflect the change you wish to make. Try moving it to the Desktop, log out and back in and try again.
Additionally, these cache files are generated by system, specifying general application/file associations, and can also become corrupt:
"/Library/Caches/com.apple.LaunchServices-014501.csstore"
"/Library/Caches/com.apple.LaunchServices-0140.csstore"
If you have additional users there will be additional csstore files, one for each user. They can also be moved to the Desktop. A restart will cause the system to create new ones.
Francine
Francine
Schwieder

Script to override Group policy (Disable Addins and change default file type)

Hi there,
I am developing a solution for our customer that requires Office 2010 64-bit, which I have.
However my company's group policy, (I believe), keeps adding in a template manager for corporate documents, this template is 32-bit and is incompatible with my version of office. This means that everytime I open or close excel I get a warning of incompatibility.
This is irritating, as is the fact that the default new file type keeps switching back of xls, which causes me problems since my macro's need to create xlsx files, for the customer.
Now I believe that both of these are set by the group policy and while they a fine for most people, due to my unusual roll, it causes me irritations I would would rather avoid.
Since I know it will not be possible to change the group policy for the handful of people who are effected like this, I am looking for some help to, e.g. automatically run a script to adjust these settings on my local machine to make my life easier.
Thanks for your help,
Vincent.

Try using
Process Monitor for looking the key.
For example, you may set the required value through the group policy and see what windows registry keys are changed.

Post change 309 movement type - is hung in LU04

no stock or bins to move - HOW can I clean up the bogus LU04 records?

Dear Friend,
Normally in WM, when u are doing MB1A transaction with Mvt.type 309, the changed stock be placed temperaly on (922 - interim storage area) as Negative Value and going to change stock in positive value....and u want to create TO in LU04 and confirm that TO and now u find the changed stock...
From sas....

Change default Movement types at COR6N

Similar Messages

Maybe you are looking for