Change default mvt 311 for stock transfer reservation generated by system

Dear SAPper,
I used storage location '0003' planned seperately in material master MRP4 and set reorder point 100 and replenishment 100 too.
After the stock fall below 100 the system will create stock trasnfer to '0003' the 'from storage location' is still blank. the system used movement type 311
i want to used two step transfer 303 - 305 for this transfer.
of course 303 can not be used to reservation so i create customized mvt type 903 (copy from 303 and modify it)
but something still trouble is when the MRP generate reservation it always use 311 movement tpe
can i customized that when storage location planned seperately stock fall below reorder point, MRP generate resevation transfer with mvt 903 (not standard 311)
Please kindly help
Best regards,
Freddy Ha

hi,
actually there is 2 problems here
1. 303 two step is prohibited for reservation so i create 903 to be used in reservation for two step transfer with reservation
2. reservation is created automatically for storage location plan seperataly if the stock fall below reorder point, this problem is system always use movement type 311 sloc to sloc
i want to used two step sloc to sloc, so the reservation created using 903
can i configure it?
Best regards,
Freddy ha

Similar Messages

Single Step STO Mvt 301 for Stock transfer beteen Company code during Cutover

Dear All ;
I am Planning to use Movement type 301 ie single step STO Beteeen two different company code at the time of Cutover .Is it a feasible solution ?
I am Currently handling a Org Restructuring Project ,Where one company code will be broken into five different company code ( Including Old Company code ) ,and old som of the stock of old company code needed to be shifted to new 4 company codes .
In this Context i am thinking to use 301 ,will it be a feasible solution ?
I have tested in IDES ,It is working ,But I need to be confirm as there is hudge data to be migrated .
Best Regadsl;
Joydeep Mukherjee

Hi Joy,
You can do this in one step as you already have tested in IDES, but depends on your business requirement that in which way you want to handle your stock transfers either by using one step or two steps movement types or by using stock transport orders. Using STO is a good approach for stock transfers between two company codes.
See the below link:
http://help.sap.com/saphelp_45b/helpdata/en/a5/63391843a211d189410000e829fbbd/content.htm
regards,
anoop Singh

Stock Transfer Reservation

Hello Experts
Can any one please elaborate what are pre reqisites for Stock Transfer Reservation?
Thanks
Ankit

Kailash
Replenishment via Stock Transfer Reservation is possible, you need to maintain data in MRP4 view. Here is defination for Stock Transfer Reservation. But I dont know how to set it.
Triggering Replenishment via Stock Transfer Reservations
Use
This procedure shows you how you can stage components for production using stock transfer reservations. It makes sense to use stock transfer reservations if you do not want to carry out direct stock transfer, you do not use KANBAN (you have maintained no supply areas or control cycles) and the issue storage location is not managed using Warehouse Management. Replenishment using stock transfer reservations differs from direct stock transfer in that, for stock transfer reservations, the pull list only creates a reservation for the components required. You carry out the actual stock transfer posting in a separate step.
For a direct stock transfer, the pull list posts the stock transfer immediately. A stock transfer reservation, therefore, provides you with an opportunity to check the actual stock situation more accurately.
Thanks
Ankit

Problem on creation of Outbond Delivery for Stock Transfer Order

Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
Andrea

Dear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea

Delivery without reference for stock transfer within the same plant 311

Dear all,
I need to create a delivery without reference for stock transfer within the same plant, movement 311, i.e. just from 1 storage location to another storage location.
I tried to use VL01NO with delivery type UL.
Now my question is how can I assign a receiving plant for a customer?
I can't do the MIGO or MB1B document because I need the delivery document (packing list, forms, Texts,...).
It's possible this option???
Thank you very much.

Hi,
What is the item category you are assigning while doing VL01NO? Check the schedule line category for that item category assignment. That Schedule line category has an option for one step GI. There you can assign 311 or create a separate item category and schedule line category and in that SC assign 311.
Thanks
Krish.

Requirement date in reservation for Stock transfer from one storage locatio

Hi ALL,
I have activated the resevration creation by MRP for stock transfer from mail ware house to service storage location by creating MRP area for service storage location when there is requiremnt from service and when MRP is run on the MRP area the resevration in created and trasnfer order is created .but the requiremnt date in reservation is not the same asd of on service order.so kindly let me know why it is ahppening.

Hi,
check the GR processing time for the material . System may be adding GR processing time with reservation requirement to arrive at the service delivery date.
Regards,
Mrinal

Stock Transfer Reservation in spite of Purchase Requisition in MRP run

Dear SAP gurus,
We are running MRP heuristic on the PP/DS and we have different results comparing our development and productive environments.
In our productive environment purchase requisitions are generated and in our development environment stock transfer reservations are generated as result of the MRP run.
Where can I check differences of configuration that would be causing this?
Thanks and BR
Mauricio

Mauricio,
I guess I was not clear in my suggestion, I apologize. Differences in T001W between ERP dev and prod will not necessarily generate your problem, differences in sourcing within APO between APO dev and APO prod will generate the differences. I only mentioned the vendor number because a transportation lane can exist 'source plant > destination plant', but also you can have a transportation lane 'vendor of source plant > destination plant' which would also have an impact on the type of req created.
Easier to check the sourcing, //PWBSRC1, mentioned earlier. Your dev system should contain no objects that relate to Stock Transport orders. You can delete the STO sourcing records within that transaction, which will also delete the material assignment to the Transportation lane. Hopefully you will then get the default external supply proposal, which is normally a Purchase req.
Also check for presence of quota arrangements //SCC_TQ1. Delete any that unnecessarily refer to an STO object.
Best Regards,
DB49

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

Material Ledger for Stock Transfer Postings

Hi All,
I have a question about the way material ledger is calculated for stock transfer postings (movement type 641). I will give an example to illustrate this issue:
Material A has a Standard cost of $10
Material B has a Standard cost of $8
During the month 100 units were transferred from material A to Material B. This created a financial posting as follows:
Credit Material A -          $1000
Debit Material B -           $800
Debit Price Difference    $200
This price difference of $200 was used in the calculation of Actual cost for material B
However, the Actual Cost for Material A was $9. I would have expected the system to use this actual cost to calculate the difference to be posted to material B. Hence the difference used in Material B should have been $100 {(9 8) X 100} and not $200.
Has anyone had a similar issue, or know how the system resolves this (if at all)?
Points will be rewarded for relevance.
Thanks

Dave, I see that your process is slightly different to mine. We do not revalue inventory at month end, instead the material ledger program posts the revalued amount to a reserve account and the actual cost is only a statistical entry. The material ledger calculation is reversed automatically in the new month and the standard price is used for valuation.
I think this might make it difficult for the system to value STO's at actual. I may need to check with SAP.
Thanks

Edi messages for stock transfer

Hello gurus,
lately our company has start to use service of the external warehouse. I was asked to organise the process of the inventory stock transfer between warehouse in system, but our external warehouse is 3rd party which is running another system.
so, is it possible to make somehow the stock transfer - e.g. reservations and confirmation of this reservation using EDI?

Thanks for your reply.
You are right that the customer wants a referene number and therefore the delivery number can be used ... so when the POD comes back the delivery number will be referenced ... but my issue is with the items in the delivery
We could have items 900001, 900002 etc and each of these need to be referenced in the POD. So the custoomer woudl need to reference these which I dont think they are likely to do.
I also suspect I am wrong .. but when I try the POD IDOC with WE19 test tool I have to enter the item number .. so either the customer has to send it or we have to do some ABAP to identify the item somehow I think?
Thanks for any more thoughts

Billing type should pickup by default while doing the Stock transfer invoic

Dear Guru's,
For stock transfer Process when I am creating billing with reference to delivery Billing type ZF2 do not come by default. where I need to do the setting for this.
System through the error saying that: 100000245 000000 Delivery type ZNL cannot be invoiced with billing type F2 if i have select the invoice type ZF@ manually it is coming. i want the ZF2 invoice type should come by default.
Regards,
Pratap

In your delivery type config ZNL, check which Order type is mentioned in the field 'Default Order type'. If you copied from standard, it should be DL.
But whatever order type it is, then goto VOV8 for that order type and make the Delivery related Billing type and Intercompany Billing type as ZF2. Then it will come as default.
Hope this helps

No Quality Inspection for Stock Transfer

Hi,
There is a scenario now in which a material is activated for quality inspection. This same material is also used for Stock transfer from other plant with same company.
So if material if received using STO, how can I deactivate Quality Inspection and just transfer to unrestricted use.
Thank You,
Raymond

Hi
check user exit.
QAAT0001 Inspection type determination different from variant 01
You can install enhancement QAAT0001 ,the function modules contained in this enhancement are called up in the
programs in which you can access the master inspection type if necessary.
The inspection lot is then created with the inspection type that was
determined using the enhancement.
logic will be for STO it will consider Z mvt type of origin 08 ,for STO material activate a Z mvt type & do not tick on Post to inspection.
For normal stock trnsfer system will create 08.
I hope this will add some value
Regards'
Sujit

What movment types used for stock transfer from Non-WM sloc to WM sloc?

Hello experts,
Can some one tell me , what movment types used for stock transfer from Non-WM sloc to WM sloc in the same plant through MB1B?
Thanks

Hi
When I try to use the Movement Type 311 with Tcode MB1B, in order to move the stock from IM storage Locations to WM storage Locations, I do create the Material Document Successfully, but when I try to convert the Material Document to Transfer Order, I get the message "select atleast one storage type first", but there is no storage type appearing on the screen.
Can you please help me to resolve the above issue.
Thanks.

Pending Quantity in PO for stock transfer

Dear All,
I want to know the pending order quantity for stock transfer orders (plant to plant),I have tried
ME80FN,ME2L Etc. but all report are showing the pending quantity only after MIGO done by
the receiving plant.
Our requirement is like this that one plant created one stock transfer order to one
plant and he want to know the actual pending order quantity as on date considering
by deducting stock in transit (5B5T) (i.e. PO quantity 100 pcs - quantity delivered 50 pcs then actual
pending quantity should be 50 pcs but in mentioned report it is showing 100 pcs pending).
Please note in our case in every PO more than 800 line items are there.
Can any one inform me about standard report or any table where net pending quantity are getting
stored.I have checked table EKBE,MARD,MARC.
Regards,
SP Shukla.

Hi,
In mb5b u give movement type & check
Generally i do not think there is a std report, this we also faced, we developed a report with the help of ABAPer
Pandari

Proforma invoice not created for stock transfer order

Hi Experts
while creating a proforma invoice for stock transfer order between the plants we are not able to create proforma invoice , the process is replenishment delivery is created and Wm is also done and the billing with reference to delivery and the item category is relevant for billing with value J, and below is the message i get whilw creating invoice
     Technical data
         Tech. data details
          Client
          Group Number
          Sales Document Number
          Item Number of the SD Document         000010
          Schedule Line Number                   0001
          Counter in Control Tables              00
          Message Identification                 00
          System Message Number                  001
          Output Type                            E
          Message Variable 01
          Message Variable 02
          Message Variable 03
          Message Variable 04
          Group Type                             F
No biliing documents generated
Please suggest.
Thanks

This explanation is not in detail and hence I am not clear about your configuration settings.
First go to IMG Logistics-General => Tax on Goods Movements => India => Business Transactions => Outgoing Excise Invoices => Assign Billing Types to Delivery Types.
There ensure that you have assigned the billing type JEX (assuming that you are using the standard) to your delivery type NL.
Perhaps, you can also try with "D" for your item category in Billing Relevance field but I am not sure this will solve your issue. Try in development client.
thanks
G. Lakshmipathi

Change default mvt 311 for stock transfer reservation generated by system

Similar Messages

Maybe you are looking for