CHANGE DEFAULT NAME/SECURITY SETTINGS = LOWER CONNECTION SPEED

I have a Linksys WirelessN Router--If I use the router with all of the default settings I can achieve cable speeds of 300mbps. Fantasically fast!!! As soon as I change the name of the router from "Linksys" to any other name, my speed drops back down to 54mbps. I also changed the security settings to "PSK Personal" and added a personal password so my system wouldn't get "hyjacked." Any thoughts?

Hi… logon to router’s setup page, try changing Radio band to wide 40MHz, wide channel to 9, standard channel to 11, go to advanced wireless settings reduce beacon interval to 50, fragmentation and RTS threshold to 2304, change N Transmission rate to 270MBps…wireless security should be PSK personal, also try upgrading latest firmware on router, check whether it makes any difference or not.

Similar Messages

  • I changed my WRT54G security settings from WPA to WEP

    I changed my WRT54G security settings from WPA to WEP and now one of my latops (Dell 5100) will not connect wirelessly. It is using a linksys wireless-B notebook adapter. I am at a loss at how to reconnect this to my wireless network.

    Go to the setup page of the router on the wired computer and click on the Wireless tab,check the network name(SSID),change the Wireless Channel to 11-2.462 GHz,Keep the SSID broadcast enable and click on save settings...Click on the subtab Wireless Security and change the Security mode to WEP or WPA as per your requirement.If you are using WEP then,note down the KEY1 as the network key(case sensitive)...
    Now,on the laptops,delete the preferred network and then,try to connect the Wireless Network.

  • Changing Airport Express security settings

    How do I change the security settings on my airport express so that my PS3 recognizes it?

    Jroosky wrote:
    How do I change the security settings on my airport express so that my PS3 recognizes it?
    Welcome to Apple's discussion groups.
    Launch AirPort Utility, select the AirPort Express on the left, and click "Manual Setup". Select the AirPort panel, Wireless tab. You should see the security settings in the lower part of that window. Once you change them, click the "Update" button.

  • Changing default name of FDF file created by submit button

    Hi all,
    I was wondering if there was a way to change the default file name used by acrobat when the submit button is clicked. Currently, when a user clicks the submit button on my form, acrobat allows them to generate an FDF file and either save it to their hard drive or attach it to an email, but uses the file name "<name of pdf form>.fdf" I would like to change this to a unique ID that is generated based on form data. I didn't have any problems generating the UID, but I can't figure out how to change the name of the FDF file.
    Does anyone know if this is possible?
    Thanks.
    Jose

    Do you sign the document before extending the features? If you do then make sure "Lock the Document after signing" checkbox is not checked. Try this:
    Clear all signature fields.
    Click on the field that you want to sign
    "Sign Document" window will appear
    In the left bottom corner this check box will appear.
    Uncheck it.

  • Changing default name and email address in mail

    For some reason, the default name and address that comes up when I try and edit Mail, Contacts,& Calendars under system preferences is different the one I originally set up.  When I try and edit, it seems like I have succeeded, but if I come back into system preferences, the changes have not been remembered.  Any suggestions?
    Thanks

    Thanks, Ernie
    I wasted about 20 minutes looking for it and couldn't find it
    cheers,
    tom

  • Very low connection speed.

    Hi, I've waited the 10 days since I first got BT Broadband and I wondered about the slow speed I am getting. The speed test says my line is rated for 8mbit (8000kbit) but I only get up to 900kbit connection speed, it was around 600-700kbit for a while but now seems to have settled at 900~kbit. When I ordered the package the line check said I can get between 8 and 15megabit but should expect 8.5.
    Is there a fault on the line? The online speed checker thing (which seems to have been replaced or I just can't find it anymore) said I should report a fault and that on my line I should be connecting at more like 6000kbit-7000kbit.
    This is what my router says in the advanced connection page:
    ADSL Line Status
    Connection information
    Line state:
    Connected
    Connection time:
    2 days, 13:50:05
    Downstream:
    947 Kbps
    Upstream:
    551 Kbps
      ADSL settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.3 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    4.1 dB / 5.8 dB
    Line attenuation (Down/Up):
    75.0 dB / 41.7 dB
    Output power (Down/Up):
    0.0 dBm / 12.7 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    3690 / 1011
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    HEC Errors (Down/Up):
    2810 / 467
    Error Seconds (Local/Remote):
    0 / 729

    Here's the results of the download test thingy:
    This Test comprises of Best Effort Test: -provides background information.
    Download  Speed
    763 Kbps
    0 Kbps
    7150 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 763 Kbps
     For your connection, the acceptable range of speeds is 2000-7150 Kbps.
     IP Profile for your line is - 8000 Kbps
    This test was not conclusive and further testing is required.This might be useful for your ISP to investigate the fault.
    Note: An Upstream test was not conducted on this line due to a technical issue. If your concern is related to upstream performance then please retry
    the performance test again in 1 hours time.

  • Changing default name in screen sharing

    I've been trying to find out how to change the default name which pops up in screen sharing when I use finder to remotely log in to my mac mini.  Basically, I want the login to be automatic, without having to mess with user accounts on either computer.

    When using Tracks and Development Components changes are "categorized" under an Activity. The "categorized" is my term.
    Basically, when you try to change some code that's been checked in you are asked to specify what Activity you want the change(s) should go under.
    If you click the button to create a new Activity a "New Activity" Dialog pops up. One of the fields in that dialog is called "Display Name"
    The default value of that field is "[not yet defined]".
    What I'm wondering is if there is somewhere in the preferences or some config files where I can change that default value to something else.
    HTH
    David

  • Change default name when adding new e-mail account

    When I try to add a new e-mail account in MacMail, the populated default name for the user is incorrect.  I have to change it to my name and was wondering where this is coming from and how to remove it.

    Did this ever get answered somewhere?  I would like to change mine also.

  • E2000 low connection speeds

    I recently "upgraded" my router from a WRT54G to the E2000, and changed my wireless computers to USB-N adapters. At first they were only at 54Mbps but found I had to use WPA2 (I was on WPA) and after making the change, I had anywhere from 107Mbps to 130Mbps connections. (Although these are dual-band adapters, I can't take advantage of 300Mbps because I left the router on 2.4Ghz only since I have some wireless-G only laptops and I understand you can't have the router on 5Ghz because they won't connect.)  Anyway, a few days later, when I checked the connect speeds of these wireless-n computers, one was at 5Mbps, another at 20-something.  Signal strength is good to the computers as it's always been.  Does this router "alter" the speeds "as needed" or something?  Any help is greatly appreciated!
    Solved!
    Go to Solution.

    I just completed setting up my WRT54G with my E2000 and switched the E2000 to 5Ghz band. Now when my computers with dual band capability connects with the E2000 (using a couple of channels in the hundreds, like 129 and something or whatever) I see a connect speed varying anywhere from 140 to 300Mbps, whereas all my 2.4Ghz equipped computers are at 54Mbps.  My daughter's computer has wireless-n but only on 2.4Ghz and it originally connected as high as 130Mbps until I switched the E2000 to 5 Ghz so now she's stuck at 54Mbps.  I suppose if I had bought the E3000 (?) or another model that also supports both bands simultaneously then she'd have her wireless-n speeds as well as the others that could run on 5Ghz which affords more "open" channels compared to what's available on 2.4Ghz... (didn't want to spend that much money on a wireless-n router since I knew I could still use my WRT54G since selling it would get me almost nothing for it... might as well use it...

  • How can i change the name of my wifi connection on my Airport express?

    The name of my wifi is Réseau de Francois with an accent on the letter E.
    Now, i have many conflict with other electronic components because they do not accept french accent.
    How can if change the name to reseau de francois without an accent on the letter E on my airport express 4th or 5th generation
    thanks

    airport utility in the utilities folder.

  • CrystalReport into Business Objects - Change default name when saving

    Hello everyone,
    i'm asking a question here because I don't know anywhere else people who have sufficient skill to answer.
    I hope the thread is posted in the right section, if not, sorry and please move it where it belongs.
    I'll try to simply explain my problem.
    I have Business Objects XI 3.1 enterprise and i use InfoView to open a CrystalReport report.
    When I export it, (the extension does not matter) the location window opens and the default name is CrystalReportViewer.xxx .
    What I need is to not show to the customer the default name but the name of the report itself.
    Anyone has an idea?
    Thank you a lot!
    Cric

    We have a similar request for our companies deployment. Unfortunately I found that this is normal behavior for the application and that an enhancement request has already been opened (ADAPT01550068).
    SAP note 1491438 can provide you with additional information. Hope this helps.
    Edited by: Rodney Barrera on Feb 17, 2012 5:11 PM

  • Change default name when connecting to server

    Hi all,
    I just got a new work computer with OS 10.5. I've noticed a minor nuisance. Since the IT guy set up the computer, he was the first person to connect to our shared servers. Now whenever I try to connect to the same server, it always defaults to his network username. Is there any way to change this so that it defaults to mine?
    Let me know if you need any other information.
    Thanks.
    Chris

    Bring up Applications>Utilities>KeychainAccess, under Keychains in the left column click 'login'. Under Category in the lower left column click 'All Items'. You should be able to see the unwanted key in the listing in the right column ('Kind'is 'Internet Password'). Control-click it and delete.
    Message was edited by: xnav

  • Changing default Warp Stabilizer Settings

    Hi,
    Does anyone know if the default settings of Warp Stabalizer can be amended so I dont have to keep changing 50% to 10%?
    Thank you
    Regards
    Bini

    Hmm, good idea. How would you see it working? First select clip in timeline and then press kb shortcut, if there is one?
    Anyhow, I don't know that it is possible. Would make a good feature request. If you want to do that, go to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en

  • Change default query display settings (show more cells)

    Hello Friends!
    I have a little issue with default display settings in the Bex Query Designer.
    Can I change the display settings like in an analyses item e.g. more Number of Data Columns Displayed at once?
    Thank you for your help
    Best regards
    Florian

    You can also look at the following thread -
    show more than 5 column in web analyzer

  • Captivate 5.5 - Change default highlight box settings before recording

    Hi, I'm trying to change the color of the default highlight box added to recordings. I need to change this at the global settings level and not project and before recording starts. Any suggestions?
    Thanks.

    Hello and welcome to the forum,
    Could you explain this 'at the global settings level and not project....'? What did you change? Normally you'll have to change the object style of the highlight box:
    If you do this without opening the first CP-file, the style will be applied to all your new projects while recording.
    Lilybiri

Maybe you are looking for