Change default namespace info?

Greetings,
Just purchased DW CS3 and I'm wondering if there's a way or a
place to make permanent "preferences" changes to the way DW assigns
the namespace when you create a new XHTML document? I've found how
to change the doctype and the encoding preferences but not the
place where it is assigning namespace.
Zeldman, and many, many others recommend specifying the
namespace as such:
(the first attached example)
while DW is only giving me this much: (and I don't want to
have to add the "English" declaration for every page I create)
(see second attached example)
Thank you very much for any help you can offer!
Regards,
Pedro

*bump*
still seeking a resolution, if you have any ideas!
Thanks,
Pedro

Similar Messages

ME41 : change default flag info update

Dear.
When I create a new request for quotation in the item view the system purpose flag info update with value C as default.
I need to change the default of this flag with value B.
Can you help me ?
Thanks in advance.

HI,
Check configuration for Default values for purchasing (parameter EVO) from IMG>MM>Purchasing> Define default values for buyers> Settings for default values. Change default value key if already exist. Under Indicators, select B for info update quotations.
go to transaction SU01 in change mode and under tab parameters, enter paramert ID as EVO and the parameter value as the above key, for the user id.
Pls note that this is user dependant.
Also, while creating Quotation, it is then mandatory to enter plant at item level.

Change the default namespace in soap message generated by webservice proxy

I have a requirement where the default namespace generated by the webservice proxy has to be changed. For example, below is a soap request message generated by the proxy:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://siebel.com/asi/"
xmlns:ns1="http://www.siebel.com/xml/getAllSecurityValuesResponse/PS"
xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<env:Header>
<wsse:Security
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
env:mustUnderstand="1"
xmlns:xmlns="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:UsernameToken
xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Username>kaoliver</wsse:Username>
<wsse:Password
Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">db2</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</env:Header>
<env:Body>
<ns0:SearchSecurityServicegetAllSecurityValues_1>
<Login>kaoliver</Login>
</ns0:SearchSecurityServicegetAllSecurityValues_1>
</env:Body>
</env:Envelope>
In the above message, I want to change the oasis namespace to a different namespace. Where are the default namespaces defined in the proxy classes generated by Jdev so that I can change them?
Thanks in advance,
Warm Regards,
Shashi Anand B

>
If I define a prefix P2L in the expression editor to correspond to "http://foo.com/namespace/business", I'm able to reference the ExecuteResponse element as "./P2L:ExecuteResponse", but then I get stuck.
If I try use a Rename action to change the namespace for "./P2L:*", only the ExecuteResponse element is renamed to <sof:ExecutResponse xmlns:sof="http://foo.com/namespace/proxy">. Upstream in the calling application, there's an XML stream reader exception because (I assume) ExecuteResult is not found and parsed.
>
You pattern "./P2L:\*" matches just one element so it's ok that the payload's namespace wasn't touched. If you want to rename namespace for all elements try "//P2L:*". However, I'm not sure whether this is what you want. Try do describe what you do, what you want and what you get instead.
>
I also tried using a Replace action against "./P2L:ExecuteResponse/@xmlns" to replace its contents with "http://foo.com/namespace/proxy". I also tried "./P2L:ExecuteResponse/@P2L:xmlns". Neither worked.
>
I think it's not a good approach to replace content of xmlns as this attribute is not a common xml attribute.

In mail, my mail is saved as an outlook file by default. I want to change default to mail?

In mail, my mail is saved as an outlook file, i want it saved as a mail file? Change default, how?

Thanks, but this is what's happening:
In Mail, Contacts, Calendarts>Add Account
Add a MobileMe or Other?
If I choose MobileMe, it asks for my MobileMe account. If I enter that info, it tells me I already have that account set up, which I do.
So I clicked the Create Free Apple ID button on the same screen, below.
This goes to a New Apple ID page
I enter location and DOB
This goes to a New Apple ID page
I enter all of the information as required, then click Done
I get an error:
Cannot Create Apple ID
If you have an @me.com email address, sign in using your MobileMe password
This takes me back to where I started without a solution.

Can you validate an XMLElement that uses the default namespace?

We have a partner that we communicate with via XML over HTTP and the schema that they gave us for their request/response does not specify a namespace. I am able to import the schema and create variables from its elements to send the request and get a response back but when I try to validate the response I am getting an error.
We are using SOA Suite 11g and the bpelx:validate action to try to validate the variable but it consistently gives back the following error message.
java.lang.IllegalArgumentException: null schema location for ns=null [Cause=null schema location for ns=null]
I am pretty sure this is because there is no namespace specified in the response data. Is there anyway that I can validate this XML against the schema without a namespace? This is an existing interface that we are converting so we don't have the flexibility to ask the partner to change their interface. I am able to validate the same XML data in XML Spy against the schema and have been able to recreate this problem with a different small xsd with the default namespace.
I think I can write a java utility to perform the validation and call it using the embedded java action but I am hoping there is a way to do it within the tool.

Hi,
For Crystal Design related queries, close this thread and start the thread in the [SAP Crystal Reports Design forums|http://forums.sdn.sap.com/forum.jspa?forumID=300&start=0]
- Bhushan

How do I change default settings in the author field when I edit or insert a comment in a PDF?

How do I change default settings in the author field when I edit or insert a comment in a PDF?

Generally it gets this info from the Identity in the preferences. Unfortunately, I know of no way to change the Login Name that shows up in the comments. I need to look at newer versions of Acrobat on other machines, this is AA8.

Replacing default namespace in OSB message flow

I'm in the process of setting up a simple OSB proxy and could use some help figuring out how to change a default namespace in the response from the business service.
The proxy and business service use different namespaces which we'll call "http://foo.com/namespace/proxy" and "http://foo.com/namespace/business". In my routing request message flow, the contents of $body look like this and I'm able to use a Rename action with XQuery expression "./sof:*" to change "http://foo.com/namespace/proxy" to "http://foo.com/namespace/business":
<sof:Execute xmlns:sof="http://foo.com/namespace/proxy">
<sof:adminName>MyAdaptor</sof:adminName>
<sof:request>
[escaped payload omitted]
</sof:request>
</sof:Execute>
This works fine, but in the response message flow, I need to revert the namespace and am having difficulty because the response uses a default namespace instead of using a prefix:
<ExecuteResponse xmlns="http://foo.com/namespace/business">
<ExecuteResult>
[escaped payload omitted]
</ExecuteResult>
</ExecuteResponse>
If I define a prefix P2L in the expression editor to correspond to "http://foo.com/namespace/business", I'm able to reference the ExecuteResponse element as "./P2L:ExecuteResponse", but then I get stuck.
If I try use a Rename action to change the namespace for "./P2L:*", only the ExecuteResponse element is renamed to <sof:ExecutResponse xmlns:sof="http://foo.com/namespace/proxy">. Upstream in the calling application, there's an XML stream reader exception because (I assume) ExecuteResult is not found and parsed.
I also tried using a Replace action against "./P2L:ExecuteResponse/@xmlns" to replace its contents with "http://foo.com/namespace/proxy". I also tried "./P2L:ExecuteResponse/@P2L:xmlns". Neither worked.
Can anyone tell me what I'm doing wrong, or suggest a different approach? Assume that changing the calling application or business service is not an option.
Thanks!

>
If I define a prefix P2L in the expression editor to correspond to "http://foo.com/namespace/business", I'm able to reference the ExecuteResponse element as "./P2L:ExecuteResponse", but then I get stuck.
If I try use a Rename action to change the namespace for "./P2L:*", only the ExecuteResponse element is renamed to <sof:ExecutResponse xmlns:sof="http://foo.com/namespace/proxy">. Upstream in the calling application, there's an XML stream reader exception because (I assume) ExecuteResult is not found and parsed.
>
You pattern "./P2L:\*" matches just one element so it's ok that the payload's namespace wasn't touched. If you want to rename namespace for all elements try "//P2L:*". However, I'm not sure whether this is what you want. Try do describe what you do, what you want and what you get instead.
>
I also tried using a Replace action against "./P2L:ExecuteResponse/@xmlns" to replace its contents with "http://foo.com/namespace/proxy". I also tried "./P2L:ExecuteResponse/@P2L:xmlns". Neither worked.
>
I think it's not a good approach to replace content of xmlns as this attribute is not a common xml attribute.

Default Namespace Support

Hi,
I am NOT using the XPath helper package. I am using xslprocessor.selectNodes() to get a nodelist.
My xml document contains a default namespace, and I cannot change it.
Is there a work around to the fact that default namespaces is not supported? I'm getting "Namespace prefix 'x' is used but not declared" on the following pl/sql line:
guests := xslprocessor.selectNodes(xmldom.makeNode(xmldoc), '/xml/rs:data/z:row');
I'm willing to jump through a few hoops, if necessary.
Thanks for any insight!
Regina

Correction. Please use the following test case.
1. Create an application and a project in JDeveloepr 11g.
2. Add an XML document. catalog.xml, from the New Gallery.
What doesn't generate an error.
3. Copy the following XML documen to catalog.xml.
<?xml version="1.0" encoding="UTF-8"?>
<catalog xmlns:journal="http://www.xdk11g.com/xpath">
<journal:journal journal:date="November-December 2008">
<journal:article journal:section="ORACLE DEVELOPER">
<title>Instant ODP.NET Deployment</title>
<author>Mark A. Williams</author>
</journal:article>
</journal:journal>
<journal date="March-April 2008">
<article section="TECHNOLOGY">
<title>Oracle Database 11g Redux</title>
<author>Tom Kyte</author>
</article>
</journal>
</catalog>
4. Select Search>XPath Search.
5. Add a namespace mapping with Add button.
Prefix: journal
URI: http://www.xdk11g.com/xpath
6. Specify an XPath expression in Expression field.
/catalog/journal:journal
7. Click on OK. The jounal:journal node gets selected.
What generates an error (the bug).
8. Copy the following XML document to catalog.xml.
<?xml version="1.0" encoding="UTF-8"?>
<catalog xmlns="http://www.xdk11g.com/xpath/defaultNamespace">
<journal date="November-December 2008">
<article section="ORACLE DEVELOPER">
<title>Instant ODP.NET Deployment</title>
<author>Mark A. Williams</author>
</article>
</journal>
<journal date="March-April 2008">
<article section="TECHNOLOGY">
<title>Oracle Database 11g Redux</title>
<author>Tom Kyte</author>
</article>
</journal>
</catalog>
9. Add a namespace mapping with Add button for the default namespace. Specify prefix as empty.
Prefix:
URI: http://www.xdk11g.com/xpath/defaultNamespace
10. Specify an XPath expression in Expression field.
/catalog/journal
11. Click on OK. The journal node does not get selected.

How do I change the my info name in Siri

I have recently got an iPad wi-fi cellular 16gb. In the Siri settings it has my wife's name so it uses all her contacts. How do I delete her off the iPad and enter my details?

Hi Richard,
Was this previously your wife's iPad? If so it sounds like it has all her details on it still, if you are happy to get rid of all the info on here you can go to Settings>General>Reset> and choose the option to delete/erase all settings, this will restore iPad to factory defaults - as if you'd just purchased it new, however only do this if you don't require any info stored on the device as it will of course delete everything.
If however you just wish to change the My Info you need to have an entry in Contacts for yourself, once done go to Settings>General>Siri>My Info and select your Contact card from the list.
Regards,
Steve

How to parse XML document with default namespace with JDOM XPath

Hi All,
I am having difficulty parsing using Saxon and TagSoup parser on a namespace html document. The relevant content of this document are as follows:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
</head>
<body>
    <div id="container">
        <div id="content">
            <table class="sresults">
                <tr>
                    <td>
                        <a href="http://www.abc.com/areas" title="Hollywood, CA">hollywood</a>
                    </td>
                    <td>
                        <a href="http://www.abc.com/areas" title="San Jose, CA">san jose</a>
                    </td>
                    <td>
                        <a href="http://www.abc.com/areas" title="San Francisco, CA">san francisco</a>
                    </td>
                    <td>
                        <a href="http://www.abc.com/areas" title="San Diego, CA">San diego</a>
                    </td>
              </tr>
</body>
</html>
Below is the relevant code snippets illustrates how I have attempted to retrieve the contents (value of <a>):
             import java.util.*;
             import org.jdom.*;
             import org.jdom.xpath.*;
             import org.saxpath.*;
             import org.ccil.cowan.tagsoup.Parser;
( 1 )       frInHtml = new FileReader("C:\\Tmp\\ABC.html");
( 2 )       brInHtml = new BufferedReader(frInHtml);
( 3 ) //    SAXBuilder saxBuilder = new SAXBuilder("org.apache.xerces.parsers.SAXParser");
( 4 )       SAXBuilder saxBuilder = new SAXBuilder("org.ccil.cowan.tagsoup.Parser");
( 5 )       org.jdom.Document jdomDocument = saxbuilder.build(brInHtml);
( 6 )       XPath xpath = XPath.newInstance("/ns:html/ns:body/ns:div[@id='container']/ns:div[@id='content']/ns:table[@class='sresults']/ns:tr/ns:td/ns:a");
( 7 )       xpath.addNamespace("ns", "http://www.w3.org/1999/xhtml");
( 8 )       java.util.List list = (java.util.List) (xpath.selectNodes(jdomDocument));
( 9 )       Iterator iterator = list.iterator();
( 10 )     while (iterator.hasNext())
( 11 )     {
( 12 )            Object object = iterator.next();
( 13 ) //         if (object instanceof Element)
( 14 ) //               System.out.println(((Element)object).getTextNormalize());
( 15 )             if (object instanceof Content)
( 16 )                   System.out.println(((Content)object).getValue());
.This program would work on the same document without the default namespace, hence, it would not be necessary to include ns prefix along in the XPath statements (line 6-7) either. Moreover, I was using org.apache.xerces.parsers.SAXParser to have successfully retrieve content of <a> from the same document without default namespace in the past.
I would like to achieve the following objectives if possible:
( i ) Exclude DTD and namespace in order to simplifying the parsing process. How this could be done?
( ii ) If this is not possible, how to include it in XPath statements (line 6-7) so that the value of <a> is picked up correctly?
( iii ) Would changing from org.apache.xerces.parsers.SAXParser to org.ccil.cowan.tagsoup.Parser make any difference as far as using XPath is concerned?
( iv ) Failing to exlude DTD, how to change the lookup of a PUBLIC DTD to a local SYSTEM one and include a local DTD for reference?
I am running JDK 1.6.0_06, Netbeans 6.1, JDOM 1.1, Saxon6-5-5, Tagsoup 1.2 on Windows XP platform.
Any assistance would be appreciated.
Thanks in advance,
Jack

Here's an example of using a custom EntityResolver with the standard DocumentBuilder provided by the JDK. The code may or may not be similar for the parsers that you're using.
import java.io.IOException;
import java.io.StringReader;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.xml.sax.EntityResolver;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
public class ParseExamples
    private final static String COMMON_XML
        = "<music>"
        +     "<artist name=\"Anderson, Laurie\">"
        +         "<album>Big Science</album>"
        +         "<album>Strange Angels</album>"
        +     "</artist>"
        +     "<artist name=\"Fine Young Cannibals\">"
        +         "<album>The Raw & The Cooked</album>"
        +     "</artist>"
        + "</music>";
    private final static String COMMON_DTD
        = "<!ELEMENT music (artist*)>"
        + "<!ELEMENT artist (album+)>"
        + "<!ELEMENT album (#PCDATA)>"
        + "<!ATTLIST artist name CDATA #REQUIRED>";
    public static void main(String[] argv)
    throws Exception
        // this version uses just a SYSTEM identifier - note that it gets turned
        // into a file: URL
        String xml = "<!DOCTYPE music SYSTEM \"bar\">"
                   + COMMON_XML;
        // this version uses both PUBLIC and SYSTEM identifiers; the SYSTEM ID
        // gets munged, the PUBLIC ID doesn't
//        String xml = "<!DOCTYPE music PUBLIC \"foo\" \"bar\">"
//                   + COMMON_XML;
        DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
        dbf.setValidating(true);
        DocumentBuilder db = dbf.newDocumentBuilder();
        db.setEntityResolver(new EntityResolver()
            public InputSource resolveEntity(String publicId, String systemId)
                throws SAXException, IOException
                System.out.println("publicId = " + publicId);
                System.out.println("systemId = " + systemId);
                return new InputSource(new StringReader(COMMON_DTD));
        Document dom = db.parse(new InputSource(new StringReader(xml)));
        System.out.println("root element name = " + dom.getDocumentElement().getNodeName());
}

Default namespace in WebLogic Workshop generated WSDL

Hello there,
I am trying to access a very simple webservice developed in WebLogic Workshop
(say something like HelloWorld.jws) from a ColdFusion application. However, I
get an Axis fault on Coldfusion implying that it could not invoke the required
method. I am running the examples server and the work shop. I noticed that some
of the documentation mention changing the namespace from http://www.openuri.com
to something else.
Does that have to do anything with the service not being able to be invoked or
it could be something else?
Could not perform web service invocation "Hello" because AxisFault faultCode:
{http://xml.apache.org/axis/}Server.userException faultString: java.net.ConnectException:
Connection refused faultActor: null faultDetail: stackTrace: java.net.ConnectException:
Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at
java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:350) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:137)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:124) at java.net.Socket.<init>(Socket.java:268)
at java.net.Socket.<init>(Socket.java:95) at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:131)
at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:175) at
org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:118) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:156) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:126)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:182) at org.apache.axis.client.Call.invokeEngine(Call.java:2113)
at org.apache.axis.client.Call.invoke(Call.java:2102) at org.apache.axis.client.Call.invoke(Call.java:1851)
at org.apache.axis.client.Call.invoke(Call.java:1777) at org.apache.axis.client.Call.invoke(Call.java:1315)
at org.openuri.www.HelloWorldSoapStub.hello(HelloWorldSoapStub.java:85) at java.lang.reflect.Method.invoke(Native
Method) at coldfusion.xml.rpc.ServiceProxy.invokeImpl(Unknown Source) at coldfusion.xml.rpc.ServiceProxy.invoke(Unknown
Source) at coldfusion.runtime.CfJspPage._invoke(Unknown Source) at coldfusion.tagext.lang.InvokeTag.doEndTag(Unknown
Source) at cfstaffphone22ecfm1540840989.runPage(/www/docs/viper.asce.org/staffphone2.cfm:16)
at coldfusion.runtime.CfJspPage.invoke(Unknown Source) at coldfusion.tagext.lang.IncludeTag.doStartTag(Unknown
Source) at coldfusion.filter.CfincludeFilter.invoke(Unknown Source) at coldfusion.filter.ApplicationFilter.invoke(Unknown
Source) at coldfusion.filter.RequestMonitorFilter.invoke(Unknown Source) at coldfusion.filter.PathFilter.invoke(Unknown
Source) at coldfusion.filter.ExceptionFilter.invoke(Unknown Source) at coldfusion.filter.ClientScopePersistenceFilter.invoke(Unknown
Source) at coldfusion.filter.BrowserFilter.invoke(Unknown Source) at coldfusion.filter.GlobalsFilter.invoke(Unknown
Source) at coldfusion.filter.DatasourceFilter.invoke(Unknown Source) at coldfusion.CfmServlet.service(Unknown
Source) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:226) at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:198)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:348)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:451)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:294)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66) null

Sanjeev,
The exception you mentioned about changing the namespace should not cause
the behavior that you are noticing.
The exception that you are receiving states that your ColdFusion application
is not able to access the Workshop Web Service.
Are both coldfusion and Workshop on the same physical machine ?
If they are not on the same machine.
Are you able to access the wsdl via a browser from the machine on which
coldfusion installed ?
The wsdl has an service name tag
- <port name="SimpleTestSoap" binding="s0:SimpleTestSoap">
<soap:address location=http://localhost:7001/Raj/SimpleTest.jws />
</port>
This address location is be default the machine on which this Web Service is
built, and this defaults to localhost:7001.
This entry can be modified by editing the weblogic-jws-config.xml file found
in the WEB-INF/lib folder of the project.
Can you make sure that address location contains the correct address and
also check to see if the Web Service is available via any browser.
Hope this help.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"Sanjeev" <[email protected]> wrote in message
news:[email protected]...
>
Hello there,
I am trying to access a very simple webservice developed in WebLogicWorkshop
(say something like HelloWorld.jws) from a ColdFusion application.However, I
get an Axis fault on Coldfusion implying that it could not invoke therequired
method. I am running the examples server and the work shop. I noticed thatsome
of the documentation mention changing the namespace fromhttp://www.openuri.com
to something else.
Does that have to do anything with the service not being able to beinvoked or
it could be something else?
Could not perform web service invocation "Hello" because AxisFaultfaultCode:
{http://xml.apache.org/axis/}Server.userException faultString:
java.net.ConnectException:
Connection refused faultActor: null faultDetail: stackTrace:java.net.ConnectException:
Connection refused at java.net.PlainSocketImpl.socketConnect(NativeMethod) at
java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:350) atjava.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:137)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:124) atjava.net.Socket.<init>(Socket.java:268)
at java.net.Socket.<init>(Socket.java:95) atorg.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFact
ory.java:131)
atorg.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:175) at
org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:118) atorg.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:
71)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:156) atorg.apache.axis.SimpleChain.invoke(SimpleChain.java:126)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:182) atorg.apache.axis.client.Call.invokeEngine(Call.java:2113)
at org.apache.axis.client.Call.invoke(Call.java:2102) atorg.apache.axis.client.Call.invoke(Call.java:1851)
at org.apache.axis.client.Call.invoke(Call.java:1777) atorg.apache.axis.client.Call.invoke(Call.java:1315)
at org.openuri.www.HelloWorldSoapStub.hello(HelloWorldSoapStub.java:85) atjava.lang.reflect.Method.invoke(Native
Method) at coldfusion.xml.rpc.ServiceProxy.invokeImpl(Unknown Source) atcoldfusion.xml.rpc.ServiceProxy.invoke(Unknown
Source) at coldfusion.runtime.CfJspPage._invoke(Unknown Source) atcoldfusion.tagext.lang.InvokeTag.doEndTag(Unknown
Source) atcfstaffphone22ecfm1540840989.runPage(/www/docs/viper.asce.org/staffphone2.cf
m:16)
at coldfusion.runtime.CfJspPage.invoke(Unknown Source) atcoldfusion.tagext.lang.IncludeTag.doStartTag(Unknown
Source) at coldfusion.filter.CfincludeFilter.invoke(Unknown Source) atcoldfusion.filter.ApplicationFilter.invoke(Unknown
Source) at coldfusion.filter.RequestMonitorFilter.invoke(Unknown Source)at coldfusion.filter.PathFilter.invoke(Unknown
Source) at coldfusion.filter.ExceptionFilter.invoke(Unknown Source) atcoldfusion.filter.ClientScopePersistenceFilter.invoke(Unknown
Source) at coldfusion.filter.BrowserFilter.invoke(Unknown Source) atcoldfusion.filter.GlobalsFilter.invoke(Unknown
Source) at coldfusion.filter.DatasourceFilter.invoke(Unknown Source) atcoldfusion.CfmServlet.service(Unknown
Source) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91) atjrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
atjrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:226) at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:198)
atjrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:
348)
atjrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:451
atjrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:29
4)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66) null

Changing default control values in LV application?

Can anyone help me?
Is it possible to change default control values in LV program
programmatically?
Sergey Yakovlev, Berlin,
[email protected]

Its quite complex (in my opinion) to do so programically , but using a set of invoke nodes, you can get it done ('Make this value default'). Look at the attached for info (its a large link name, so you may have to copy and paste in your browser).
http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&2C14132F826F839F8625683A000B0B99&cat=DB5863CD70417B07862567930070A058
I've been simply using config.txt files of read and write to set values.

To change Default Setting of Selection Screen while Filtering on infoobject

Dear Guru's,
I just want to know where can I change the Deafult Setting from 100 to 500 which we get in the Selection Screen when we want to Filter on Info-Object level in the Workbook.
Hope this will clear the question , incase any further information required please let me know.
Many thanks.

Hi Kasi,
Please do not post the same question twice. You can see my reply at:
Re: To change Default Setting of Selection Screen while Filtering on infoobject

How do I change default software of an extension?

how do I change default software of an extension? For exemple, I want do change .dwg to a recently installed software.

Select a file of that type, choose Get Info from the File menu, change the Open With setting, and then the default for that file type.
(72647)

Adding default namespace after inlinedXML() in OSB

Hi All,
Please suggest me for the following.
We are sending one data in xml format from proxy service.
Following is the message we are getting in OSB to send
<Notification>
<Type>Data</Type>
<Channel>webservice</Channel>
<Security>NONSSL</Security>
<Message>
<type>Transfer</type>
<msg><![CDATA[<Transfer></Transfer>]]></msg>
</Message>
<Destination>XXXXXX</Destination>
<Priority>HIGH</Priority>
</Notification>>
Ideally what we are sending in our CDATA there should not be any change.
but when we are printing out body variable after inlinedxml() function.
its adding default namespace in Transfer tag.
<Body xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" xmlns="http://schemas.xmlsoap.org/soap/envelope/">
<Transfer xmlns="">
</Transfer>
</Body>>
why OSB is putting xmlns="" in Transfer tag.
Regards,
ABHISHEK
Edited by: abhishek on Sep 11, 2012 12:52 AM
Edited by: abhishek on Sep 11, 2012 1:04 AM

Hi ,
Thanks for reply and suggestion. now I got why its adding the namespace.
Now i got the problem. when we are not adding any namespace OSB environment is adding the default namespace.
My use case is :
when the body variable is
<Transfer xmlns=''></Transfer>
My outbound of proxy is following
<?xml version="1.0" encoding="UTF-8"?>
<Transfer xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"></Transfer>
I need my outbound variable is like
<?xml version="1.0" encoding="UTF-8"?>
<Transfer></Transfer>
Then I tried to send the body variable (providing default namespace) <Transfer xmlns='' xmlns:soap-env=''></Transfer>
but still getting the
<Transfer xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"></Transfer> as outbound variable
Is there any way to remove this namespace from outbound variable.
Thanks,
Abhishek
Edited by: abhishek on Sep 12, 2012 1:38 AM
Edited by: abhishek on Sep 12, 2012 1:41 AM

Change default namespace info?

Similar Messages

Maybe you are looking for