Change default pabURI attribute

Hi every one,
I did a dedicated instance of Directory Server for Address Book listening on the same ip address but 1389 port.
When i create a new mail user from Delegated Administrator, it assign to the user a pabURI attribute like this:
pabURI: ldap://mailbe1-ds:389/ou=user,ou=People,o=mailservice
I need to change default pabURI on DA from the one listed above to the following:
pabURI: ldap://mailbe1-ds:1389/ou=user,ou=People,o=mailservice
which file i need to modify ???
Regards
Caius

Solved, changing messagging parameter "local.service.pab.ldapport" with configutil.
It's not the DA to set pabURI attribute in user profile.
BYE
Caius

Similar Messages

Change default page attributes

I am trying to design a standard framework for our developers using the portal
(e.g., standard header, footer, etc). In particular, I would like to change a
couple of default page attributes such as "hidden" and "layout type". Any ideas
where this could be done? Thanks.

I never even thought of that - Word woman that I was! Thanks so much - I shall give it a go!!

Change Default Print Attributes

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

Change DBUM default recon attribute

Hi all,
I am trying to change default attribute for DBUM target resource reconcilation in OIM 11.1.1.3. What I want to accomplish is to use an UDF OIM attribute instead of the User Login.
I have changed the Reconciliation Rule "username -> User Login" for "username -> udf_username" but when I run the scheduled task I get a recon event showing "username -> username". I could not realize what I am missing or doing wrong.
Thanks in advance for your help.

Same problem again,
Trying to run target resource recon with dbum the user is not matched:
On the event details "Reconciliation Data" section in Admin Console it shows Attribute Name: Username and OIM Assigned field: Username (it should be my UDF Attribute).
The log shows:
strEntityMatchingRule_in = (((UPPER(USR.USR_UDF_USUARIO_SIIC)=UPPER(RA_ORACLEDBUSER45.RECON_USERNAME8825B9C0)))) which I assume is right.
I appreciate your help!

Is there a way to change the default page attributes (font, margins, etc) in Pages or do I have to change them every time I open a new document?

Is there a way to change the default page attributes (font, margins, etc) in Pages or do I have to change them every time I open a new document?

I never even thought of that - Word woman that I was! Thanks so much - I shall give it a go!!

How to change default compile directory tmp_ejb?

Dear all,
Someone knows how to change the default directory "tmp_ejb...." in WebLogic Server
7.0?
This is the default directory where WebLogic Server 7.0 generates and compiles
the EJB's declared in config.xml.
I try to specify the attribute TmpPath="ANOTHER_TMP_LOCATION_DIRECTORY_FOR_EJB"
in the EJBContainer node but still doesn't work.
The same thing happens when I test this attribute on EJBComponent declaration.
Someone knows if there is an enviroment variable that specify this tmp_ejb location
path?
It's false that the tmp_ejb is located where the config.xml file is placed.
I have 3 weblogic servers and they haven't the same behaviour.
Someone can help me??????
Thanks.

I ran into the same problem and was wondering if you got an aswer the question you posted in BEA's news group: "How to change default compile directory tmp_ejb?
Thanks

How to change only one attribute at the host

Hi experts,
we use host configuration with special host types. If we want to change only one attribute of the host with the cli we must change all attributes associates with the host. If we define only one new attribute all other values are set (back) to the default of the host type..
(in the gui all works fine...)
Is there a chance to change a only one attribute and keep all other attribute values of the host ?
Thanks,
Chris

No, it is not possible to do that.
All attributes (passed via -attr) are treated as a single argument to the host modification (similar to a name or description). Essentially, when you provide a -attr argument to hdb.h.mod, the command will reset the existing overridden attributes and consider only the new attributes coming thorugh the -attr arg for overriding.
You see it working from the UI properly because, the UI requests for overriding all atributes once again, even though you manually changed only one attribute.

Default dynamic attributes and weightings on BID invitation

Based on certain business logic i need to default dynamic attributes and weightings on bid invitation transaction BBP_BID_INV,
I tried to do some code in method BBP_QUOT_CHANGE of BADI
BBP_DOC_CHANGE. The execution doesn't stop at that method as i put a breakpoint there.
However it does stop at BBP_BID_CHANGE method, i could not use this method because et_weight internal table is not available there ( i need to populate something in weightings) although ET_DYN_ATTR is available.
Question is , for what purpose BBP_QUOT_CHANGE is used ?
Let me know if you have any inputs ..
-With Thanks
Alok Pathak

Hi,
BBP_QUOT_CHANGE method is used for QUOTATION.Whenever any change is done in the Quotation then this method is triggered.
BR,
Disha.
Pls reward pointsfor useful answers.

Set Default Report Attributes

Hi,
Is is possible to set the default report attributes for interactive reports so when I create a new one I don't have to go through and change the defaults. Basically I want to set the "Show Null Values as" variable to null rather than a dash for all newly created Interactive Reports, I know I can change the value once the report is created but I'd rather it default to null in case I forget to change it.
I've searched though the interface and OTN with no luck, any ideas?
Thanks in advance.

Joe
Standard reports (and hence the evil that is tabular forms) store sort columns persistently as user preferences. The <tt>apex_util.remove_sort_preferences</tt> method can be used to remove them, resetting reports to the default sort order. However this is not a precision instrument: it removes the user's sort preferences for all reports...
It is possible to remove the sort preference for individual reports using the <tt>apex_util.remove_preference</tt> method by reverse engineering the required sort preference name from the admin user preference report.

Change default selection of radio buttom

Hi Experts,i want to enhance standard component in webdynpro.in that i want to change default selection of radio button in 1 view.please help out..
Thanks & Regards
Prasad

Hi durga prasad,
Radio Button Group By Key will get the values from domain of the data element used in attribute which is binded to Radio Button Group By Key property 'selectedKey' .
That is why we don't have any code in wd_do_init method.
So you need to go to the domain and check the domain value of the data element used, and then set the default value of your interest in existing standard program using WDDOINIT---> Post Exit method as said by Naveen and Abhijeet.
You have to set the attribute binded to Radio Button Group By Key property 'selectedKey' with same domain value you want to set as default.
The following link will help you to understand how 'Radio Button Group By Key' works.
Radio Button Group By Key | Team ABAP
Please reply if any doubt.
cheers,
vidyasagar

Change "Default" location for chart legend

Hi,
By default, when you create a chartthe legend appears to the right of the chart itself. As a company all of our legends are at the top. Is there anyway to set the default location to be top rather than right?
Thanks

Ex post you can do mass manipulation with catalog manager. But I assume you're looking for an ex ante solution and that's more tricky. The controlling tag
<saw:legendFormat position="top"/>is nested within the saw:view
<saw:view xsi:type="saw:staticchart" name="staticchart!1" rptViewVers="200510010">
         <saw:template tid="charts/column.cxml"/>
         <saw:selections>
            <saw:categories>
               <saw:category position="0">
                  <saw:column columnID="c1"/></saw:category></saw:categories>
            <saw:measures>
               <saw:column columnID="c0" position="0"/></saw:measures>
            <saw:seriesGenerators>
               <saw:measureLabels/></saw:seriesGenerators></saw:selections>
         <saw:canvasFormat/>
         <saw:legendFormat position="top"/></saw:view></saw:views></saw:report>I don't think you can change that with an adaption of the answerstemplates.xml like you would for view properties. Anyone has any idea of how to default an attribute of a child object of a view? Stijn? John?
Cheers,
C.

Unable to set default table attributes in Keynote

I've been trying to change the default table attributes in one of my themes, and as per the description in the Keynote manual (page 237-8), this should be a straightforward process:
1) In the slide navigator, create a new slide.
2) If you're setting up default attributes for a particular master slide (rather than all the masters in the current theme), click Masters in the toolbar and choose the master slide. [I want to change the table attributes in all master slides in the particular theme, I skip this step.)
3) Place a table on the slide.
4) Select the table and set its attributes.
5) Do one of the following: To make the table the default for only the current master slide, choose Format>Advanced>Define Table for Current Master. To make the table the default for all masters slides in the current theme, choose Format>Advanced>Define Table for All Masters.
6) If you don't want the table on the slide, delete the table.
Step 1) through 4) is unproblematic, but the second I try to execute step 5), the new formatting is all mixed up, and I am left with a table that looks nothing like the one I have just created in step 4). (Choosing to make the new table layout valid only in the current master doesn't help.)
Any thoughts on how to sort this out would be greatly appreciated! I should mention that following a similar procedure for diagrams works like a dream.

Hi!
          We have same problem!
         The layout can be selected in application, but it is not taken as default.
     We appreciate your feedback
Best Regards.
Angelica

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Changing built in attribute names

Can you change default attribute names? I want to keep the functionality of perspectives when using "item add" and searching but change the word perspectives to "applicable to" as an example to make it more user friendly.

Changing the built in attribute names is not currently supported.
Regards,
Jerry
PortalPM

Default Transaction Attribute for EJBs

Guys,
Can you tell me the default transaction attributes if any in Weblogic 7.0 i.e.
the attributes used
if not explicitly specified for a bean method when using in CMT ?
For CMP entity beans,
MDBs,
Other beans (?) :
thanks for your help
regards
Ved

Hello Mr. Woollen,
As always, thank you for your excellent insight into the internals of BEA WebLogic.
I now have a better understanding of what happens "by default" in WLS. I do agree
that changing this now would definitely break existing applications. It's always
difficult to decide when to officially deprecate a "feature" or to leave it in
forever.
Best regards,
Ryan LeCompte
[email protected]
http://www.louisiana.edu/~rml7669
Rob Woollen <[email protected]> wrote:
For better or worse, MDBs default to NotSupported and everything else
defaults to Supports.
I say for better or worse because I would have liked to change it to
always require the user to set a default transaction attribute.
Unfortunately we have many customer's applications who depend on this
behavior, and I believe if we change it we will break all of them.
Regardless, I would not recommend depending on our default tx attribute
and instead always set one for '*'.
In general, entity beans should run as Required or Mandatory. Session
beans are usually required or notsupported. MDBs are required or
notsupported.
-- Rob
Ved Gangaputra wrote:
Guys,
Can you tell me the default transaction attributes if any in Weblogic7.0 i.e.
the attributes used
if not explicitly specified for a bean method when using in CMT ?
For CMP entity beans,
MDBs,
Other beans (?) :
thanks for your help
regards
Ved

Change default pabURI attribute

Similar Messages

Maybe you are looking for