Change Default Passwords of....

Can I change the passwords of the users:
TRACESVR
AURORA$ORB$UNAUTHENTICATED
DBSNMP
NAMES
OUTLN

I've changed the passwords of OUTLN and DBSNMP before. I don't have the other users on my databases but I would think you can
change those too. Try changing them in a test database and see what happens. That's what test databases are for.

Similar Messages

  • SRM 5.0 - how to change default password?

    Hello,
    Am trying to install SRM 5.0 Oracle 10g as the DB. In the instllation doc of SRM 5.0 a default password is given to connect to the database and I see the encrypted password is in the jdbc properties. How can we change the default password? How do I get the encrypted value?
    Any help is appreciated.
    Thanks

    Propblem resovled, find the corresponding function group and screen, then change the translation.

  • How to change default password in AP521G?

    I´m trying to change the default password in autonomous AP521G, the CCA2.1 sent me errors when I tried to change, or create another user with Privilege 15.

    Hello Glenn, It´s not a password recovery problem. I´m trying to change the default Cisco/Cisco username/password, but the Config Assistant doesn´t allowed.
    I´m going to try with CCA 2.0 version instead 2.1.
    Best Regards.
    Hector

  • Change Default Password

    Windows 7, WRT54G2 router.  How do I change the default Linksys password from "admin" to something of my chosing?  I appear not to have the Setup CD.  Router is working well but it still has the original password.
    Thanks
    Frank
    Solved!
    Go to Solution.

    Just follow the steps on the link jlbjlb provided: http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3976. It contains all the steps that will guide you on how to change the default password to something else. After changing the password and you save the settings, it will ask you to re-login to the page. Just type in the new password and you should be able to re-acess the router page.

  • How to change the Default Password on AP1131AG

    Hi all :
    I tried to change the default password Cisco to other by command line but the password cannot work out.
    The command line I used are as below :
    AP#conf t
    Enter configuration commands, one per line.  End with CNTL/Z.
    AP(config)#enable pass
    AP(config)#enable password 4dMINO123 ?
    LINE    <cr>
    AP(config)#enable password 4dMINO123
    AP(config)#exit
    AP#wr
    *Mar  1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
    Building configuration...
    [OK]
    AP#exit
    This still cannot cahnge. Below I do again below commands :
    AP(config)#enable secret
    % Incomplete command.
    AP(config)#enable secret ?
      0      Specifies an UNENCRYPTED password will follow
      5      Specifies an ENCRYPTED secret will follow
      LINE   The UNENCRYPTED (cleartext) 'enable' secret
      level  Set exec level password
    AP(config)#enable secret 5
    % Incomplete command.
    AP(config)#enable secret 5 ?
      LINE  The ENCRYPTED 'enable' secret string
    AP(config)#enable secret 5 LINE
    ERROR: The secret you entered is not a valid encrypted secret.
    To enter an UNENCRYPTED secret, do not specify type 5 encryption.
    When you properly enter an UNENCRYPTED secret, it will be encrypted.
    AP(config)#enable secret LINE
    AP(config)#exit
    AP#
    *Mar  1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
    AP#
    AP#exit
    After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
    Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
    AP con0 is now available
    Press RETURN to get started.
    AP>en
    Password:
    Password:
    Password:
    % Bad secrets
    AP>en 0
    AP>en 5
    % No password set
    AP>en 15
    Password:
    Password:
    % Password:  timeout expired!
    Password:
    % Bad secrets
    AP>
    AP>
    AP>en
    Password:
    Password:
    Password:
    % Bad secrets
    thanks and best regards,
    tangsuan

    Hi, I have even the worst problem,
    that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
    Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
    Here is my desperate situation :
    Nothing from this page helped :
    http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
    Situation after hard reset:
    Xmodem file system is available.
    flashfs[0]: 26 files, 8 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 15998976
    flashfs[0]: Bytes used: 6879232
    flashfs[0]: Bytes available: 9119744
    flashfs[0]: flashfs fsck took 43 seconds.
    Base ethernet MAC Address: 00:22:55:9f:fc:a0
    Initializing ethernet port 0...
    Reset ethernet port 0...
    Reset done!
    ethernet link up, 100 mbps, full-duplex
    Ethernet port 0 initialized: link is up
    button pressed for 1 seconds
    process_config_recovery: set IP address and config to default 10.0.0.1
    Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
    File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2006 by Cisco Systems, Inc.
    Compiled Mon 17-Jul-06 11:38 by alnguyen
    Image text-base: 0x00003000, data-base: 0x0035E440
    Initializing flashfs...
    flashfs[1]: 26 files, 8 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 15998976
    flashfs[1]: Bytes used: 6879232
    flashfs[1]: Bytes available: 9119744
    flashfs[1]: flashfs fsck took 6 seconds.
    flashfs[1]: Initialization complete....done Initializing flashfs.
    cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
    Processor board ID FCZ1238Q0HK
    PowerPCElvis CPU at 262Mhz, revision number 0x0950
    Last reset from power-on
    LWAPP image version 3.0.51.0
    1 FastEthernet interface
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:22:55:9F:FC:A0
    Part Number                          : 73-8962-14
    PCA Assembly Number                  : 800-24818-13
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC12354426
    Top Assembly Part Number             : 800-29144-03
    Top Assembly Serial Number           : FCZ1238Q0HK
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1131AG-E-K9 
    Press RETURN to get started!
    *Mar  1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
    Press>en
    Password:
    Password:
    Password:
    *Mar  1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
    % Bad secrets
    Press>en
    Password:
    Password:
    Password:
    % Bad secrets
    Press>
    *Mar  1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
    Press>en
    Password:
    Password:
    Press>sho ver
    Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2006 by Cisco Systems, Inc.
    Compiled Mon 17-Jul-06 11:38 by alnguyen
    ROM: Bootstrap program is C1130 boot loader
    BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
    Press uptime is 17 minutes
    System returned to ROM by power-on
    System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
    cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
    Processor board ID FCZ1238Q0HK
    PowerPCElvis CPU at 262Mhz, revision number 0x0950
    Last reset from power-on
    LWAPP image version 3.0.51.0
    1 FastEthernet interface
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:22:55:9F:FC:A0
    Part Number                          : 73-8962-14
    PCA Assembly Number                  : 800-24818-13
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC12354426
    Top Assembly Part Number             : 800-29144-03
    Top Assembly Serial Number           : FCZ1238Q0HK
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1131AG-E-K9 
    Configuration register is 0xF
    Press>

  • How to change the default password file's name and path when the database created?

    how to change the default password file's name and path when the database created?
    null

    Usage: orapwd file=<fname> password=<password> entries=<users>
    where
    file - name of password file (mand),
    password - password for SYS and INTERNAL (mand),
    entries - maximum number of distinct DBA and OPERs (opt),
    There are no spaces around the equal-to (=) character.

  • How to change default internet access password in Gateway Max (for cable)

    Hi All, My home boardband (home bundle with cable) connection has just been installed. I am trying to change the default internet access password. But I can not find out where to set the new password in my Gateway Max configuration page (192.168.0.1).Is there anyone having idea about that please? RegardsCheng

    Hi Yeldarb, Maybe I do not describe the issue clearly. The "admin/password" is used for accessing gateway modem configuration page. But it is not what I want now. I am wondering the method for changing the default password which modem use to connect the telstra server. I think every telstra boardband client would have one username/password pair for access internet, right? 

  • I have been trying to recover or reset my password, but the reset email never comes, so I can't change my password. I tried to open a new itunes account to assign my iphone 4 to, but it always defaults to the old itunes account?

    I have been trying to recover or reset my password, but the reset email never comes, so I can't change my password. I tried to open a new itunes account to assign my iphone 4 to, but it always defaults to the old itunes account?

    Me too! I tried to reset many times the password of my daughter’s id but she never received an email with instructions. :-(

  • Changing default database and application passwords

    Hi,
    We have default passwords for our newly configured Oracle ERP (R12).
    I have a concern regarding the changing of default password. Does changing the default passwords will have any effect on normal working of ERP and database.
    I know that we shouldn't change default APPLSYSPUB password. What about the following default passwords?
    a) Default accounts having default password in database (DBA_USERS):
    CTX SYS
    OLAPSYS
    DBSNMP
    DMSYS
    GL (oracle users .e.g AP, GL, AR)
    APPLSYSPUB
    OUTLN
    PERFSTAT
    SYS
    b) Default accounts present in Oracle Application (FND_USERS) :
    IBE_GUEST
    OP_CUST_CARE_ADMIN
    ASGADM
    MOBILEADM
    APPSMGR
    IBEGUEST
    OP_SYSADMIN
    AUTOINSTALL
    WIZARD
    IEXADMIN
    ASGUEST
    IBE_ADMIN
    ERP version : 12.1.2
    Database Version: 11.2.0.1
    Thanks in advance.
    Regards,
    Gaurav

    Hi Gaurav,
    Yes as stated by Srini, It's highly recommended that you change tyhe default password in order to safeguard your instance by outside threats.
    But please be cautious as you cant change these accounts as "alter user <username> identified by <new password>", but rather use FNDCPASS utility. I advice you to check on the TEST system before implementing on the PROD instance if you dont have prior experience using FNDCPSAS.
    Please also refer notes:
    How to Change Applications Passwords using Applications Schema Password Change Utility (FNDCPASS or AFPASSWD) (Doc ID 437260.1)
    FNDCPASS Troubleshooting Guide For Login and Changing Applications Passwords (Doc ID 1306938.1)
    How to change passwords to include special characters using FNDCPASS (Doc ID 1336479.1)
    FNDCPASS Utility New Feature: Enhance Security With Non-Reversible Hash Password (Doc ID 457166.1)
    Also see forum search:
    Forum Search: FNDCPASS
    Hope this helps!
    Best Regards

  • Changing the default password when configuring.

    Hi,
    can anyone tell me how to change the default password and username when you are first configuring your router?  You know when you go to http://192.168.1.1/?
    I know the default password is admin and there is no user name but I would like to change that so that not just anyone who knows the default password can see the wep incryption I have in place.  Please can someone help?

    What router are you using?
    On most Linksys routers, you cannot change the User Name.  You must leave it blank.
    To change the Password, login to the router, and go to the "Administration" tab.  You should find the Password somewhere nearby.

  • Default password of user SAPCPIC to change

    Dear All,
    We require to change the default password of user id SAPCPIC in
    client 001 of our ECC 6.0 and 4.7 Production system.
    Is there any complication after resetting this default password ?
    Please suggest
    Regards,
    Mahesh Phegade

    Hi,
    The user SAPCPIC is created as a u201Ccommunicationu201D user at the installation and is utilized especially for EDI. The standard profile S_A.CPIC restricts the access to the use of RFC.
    This user is coded into the function module INIT_START_OF_EXTERNAL_PROGRAM together with his standard password. This needs to be considered in case of password changes for this user.
    The standard password for this user directly after the installation is ADMIN.
    For more info
    Note 29276 - SAPCPIC: At which points are passwords visible
    Regards,
    Rafikul

  • Had problem with my hotmail account and had to change my password. Ever since then, my default e-mail account set up to hotmail doesn't work...it sends from gmail. How can I correct that?

    Had problem with my hotmail account and had to change my password. Ever since then, my default e-mail account set up to hotmail doesn't work...it sends from gmail. How can I correct that?

    On your iPhone you need to change your password in 2 places:
    - Incoming Mail Server and
    - Outgoing Mail Server
    To get to the password entry for the Outgoing Mail Server you have to tap on cell smtp.live.com and again on the second view.

  • How to change user password from default realm programaticaly

    Hello,
    I would like to know if there are any ways to change a users password from a file
    realm through java classes ie . programaticaly.

    Thank you for the support.
    After looking at the code, I noticed RealmManager is not documented in the BEA
    Javadocs. Am I missing something or is it not documented. Lot of other methods
    also not documented. Do you have the latest Javadocs?
    Thanks
    John
    "Tom Moreau" <[email protected]> wrote:
    >
    See message #4589 - it posts the code magic needed
    to change the password. The caller doesn't have to
    be aware of which realm is being used - that's taken
    care of for you.
    -Tom
    "John M" <[email protected]> wrote:
    Hello,
    I would like to know if there are any ways to change a users passwordfrom
    a file
    realm through java classes ie . programaticaly.

  • How to change default PIRWBUSER password for ABAP Proxy monitoring ?

    Hi,
    Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
    In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
    How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
    Regards
    Fernand

    Hello there.
    Please check the note below according to your system:
    #999962 - PI 7.10: Change passwords of PI service users
    #936093 - XI 7.0: Changing the passwords of XI service users
    #721548 - XI 3.0: Changing the passwords of the XI service users
    Regards,
    Caio Cagnani

  • ThinkPad USB 3.0 Secure Hard Drive - I can not change Default admin password

    I followed all the instructions from the manual guide but the password cannot being changed.
    enter in admin mode, then hold lock plus 9 until led flash in blue 
    input a new password (of course between 8 and 16 digits lenght)
    then the led flash in green three times, but then the led flash in blue and then flash in red and then in blue again as the password had wrong length.
    The manual does not provide furthe action to troubleshoot.
    is the device wiht defect?
    Any hint would be appreciated.
    Thanks,
    Marceloap

    Hello Denmark calling.
    Solution for you’re:
    ThinkPad USB 3.0 Secure Hard Drive problem.
    In order to set the Admin pass, you will have to do the following
    1. Press 0+OK for 5 sec, enter "12345678" and OK       = BLUE LED   (Admin mode)
    2. Press OK+9                                                                        = BLUE LED flashes
    3. Enter admin code with correct fashion, and then OK = BLUE LED flashes   (and now most important)
    4. Re-enter admin code, and OK                                        = BLUE LED.
    This must be done before attempting to change user password. (Obvious reasons)
    For User code change.
    This can be changed by accessing the admin mode first = BLUE LED
    And then         
    1+OK                                                                                            = BLUE LED flashes
    Re-enter user code and OK                                                    = BLUE LED
    For User code and Admin code there is not mentioned any reference online reference supplied by Lenovo, which tells the new proud owner the correct way to alter standard codes.
    But let it be said that in my humble opinion this is a (almost) great product (SSD would make the difference for me personally)
    Hopes it helps
    TaR

Maybe you are looking for