Change default port number for web logic!

Hi folks,
In my scenario, i already installed obiee 11g with simple install along with web logic on windows xp machine.where this will creates default port number for all services. now i want to change default port number of web logic that is 7001 to some to other port number. how to change this ??.plss help me asap.
regards,
mahesh

Refer tohttp://www.oracle.com/technology/documentation/1012_solaris/install.1012/install/ports.htm

Similar Messages

Change WOL Port number for clients

Hi All
We want to implement in our environment WOL functionality , for WSUS deployment and scheduled OSD deployments
We cannot unfortunately implement the default UDP port 9
My question is how can we change that default port on the clients?
I know that we can change the port on the primary server -> Site configuration -> Sites -> Properties primary site server -> tab
Port and here we can change the port number of Wake on Lan
For the client I noticed that there is a client setting -> Power Management -> Wake on Lan port Number (UDP) but that number is grayed out and set to 9
Also when I create a custom Client Setting that port number is grayed out and set to 9
How can I change that port number for the client?
Thx in advance
Regards,
Johan

The port number in Client Settings/Power Management is grayed out because "Enable wake-up proxy" is disabled. When you enable it, it becomes available. Be aware that wake-up proxy and wake on lan is 2 different things. (Beware mac address flapping)
To change the Wake On Lan port go to, primary server -> Site configuration -> Sites -> Properties
primary site server -> tab Port.
Wake On LAN port number (UDP)
For System Center 2012 Configuration Manager SP1 and System Center 2012 R2 Configuration Manager only:
Keep the default value of 9, unless you have changed the Wake On LAN (UDP) port number in the site Properties, Ports tab.
Important
This number must match the number in the site Properties. If you change this number in one place, it does not automatically update in the other place.
Benoit Lecours | Blog: System Center Dudes

How to change the port number for deployment in JAVA Studio Enterprise 8?

Hi!
Yesterday i downloaded this new sun java studio enterprise and found it mind blowing.
Now i find that all my previous applications which were running on port 8080 can't be run on sun java studio enterprise(sjse) 8.
Can anyone tell me how to change the port number on this software so i won't have to edit all my applications?

http://docs.sun.com/source/819-0080/install.html
In the Admin Configuration page (or at the command line), enter the following:
Admin User Name�Name of the user who administers the server
Password�Admin user�s password to access the Admin Server (8-character minimum)
Admin Port�Administration port number for initial server instance
HTTP Port�Port number to access the default server instance
HTTPS Port�Secure port number to access the default server instance

How do you change the port number for Apex Listener V2?

I'm running Apex listener V2 in standalone mode on Linux. I want to change the port number of the apex listener V2 (e.g 80 to 8080). How do I do that without re-installing the whole listener again?
thanks in advance
PaulP

Hi PPlatt,
You can modify your_listener_home_directory/apex/apex.properties
http.port=8080
Stop & restart listener.
HTH
Zack

Change default port used for FlexUnit reports

Good day,
I have recently set up a CruiseControl server that runs two concurrent builds. Most of these builds contain FlexUnit tests. I am well aware that the default port for FlexUnit task is 1024 and I know that only one listener can access the port at one time. I tried passing a different port number but the flexunit task hangs. So, I was wondering if anyone has tried changing the default port to something other than 1024.

Hi Michael,
I created a bug for tracking, as you requested (https://bugs.adobe.com/jira/browse/FXU-153).

Changing default page margins for Web Intelligence

Is it possible to change the default page margins for new Web Intelligence documents. The default size is 76px which most people find exceedingly large.
The defaultconfig.xml file can be modified to specify default fonts, page size, orientation, etc. Can anything be done to this file to change the default page margins as well?
Any help would be appreciated ...
Thanks

Hi James,
Following information might be helpful for answering your queries.
An ER has already been raised for the functionality yo want and the ER# Id is ADAPT01081135
State
Submitted
Origin
Customer
Date Entered
2008-05-23 12:29:54
Subject
XIR2: Webi: Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
Current Functionality
The default 'Page Layout Margins' are set to 76px each for a new Webi report.
Create a new Webi report - Go to Page Properties - Page layout - By default, Top margin=76px, Bottom margin=76px, Left margin=76px, Right margin=76px.
Requested Functionality
Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
Expected Added Value
There should be an option in Webi / Infoview to set any property value to any required default value. This should be independent of the user, because it may differ from user to user.
Found In Product
Business Objects Enterprise.
Found In Product Version
XIR2.
Found In PFA
Web Intelligence
B) use SDK kit (this is only a suggestion though)
https://www.sdn.sap.com/irj/sdn/businessobjects-sdklibrary
https://boc.sdn.sap.com/codesamples
You would find almost everything here that BusinessObjects supports (about the SDKu2019s). You could also use the forums to check if anybody have already done what you are looking for)
Regards,
Sarbhjeet Kaur

Changing default jpeg compression for Web Gallery files

I have created several web galleries from both Raw and Jpeg files with Iphoto '08 that suffer from serious jpeg compression artifacts. I haven't found any way to change the compression amount to reduce the artifacts. Is there actually a way?

papasteveo:
Welcome to the Apple Discussions. There is no way in iPhoto for the user to manage the jpg compression of the web gallery photos. If the option for visitors to download the photos is selected the copy that's uploaded is compressed approximately equivalent to an Photoshop quality setting of 8 or 9 out of 12. The pixel dimensions are the same as the original unless the max dimension in the original exceeds 3054. The the file is resized to 3054 max dimension.
If the gallery is just for viewing the image is resized to 800 x 600 with additional compression.
You could manually replace the file with one that you've prepared but it would be very tedious as each file has it's own folder and the file name is changed to web.jpg (viewing only) or large.jpg (download). You would have to rename each file to be uploaded to the new name and make sure it's placed in the correct folder.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Changing default port on deployed Web Service

Hi,
I have developed and deployed a Web service with HTTPS security level. When I check the generated WSDL, I get a correct URL. Bet when I analyse the content of the WSDL, all URLs are formed as:
<import location="https://domain.fr:-1/..." />
<address location="https://domain.fr:-1/..." />
Why do I get the -1 port on all the WSDL's URLs ? How may I get rid of this ?
Thanks in advance for your help/
Thibault

I don't believe that it's possible. Do you have a mechanism to contact the app publisher?
Also, please do not use the super-sized bolded font. It's extremely annoying.

Changing default on 'Save for Web'

On my previous 'XP' computer I'm sure that when I saved a graphic the default was jpeg but on this computer which runs Windows7 the default is gif. Is there a way I can change this?

Go to John R. Ellis' psedbtools Q&A. That solution works with Vista and PSE9 in my case.
Juergen

10g express, how to change port number for the database home page

10g express uses port 8080 for its http listener. However this number has been used by Tomcat on my computer. How can I chang the port number for the 10g home page?
Regards
jl

Andy, thank you very much, I have been able to changed the port number following your advice.
I hope you do not mind I ask a further questions along this line:
I installed 10 express db on 2 computers. One with Tomcat and the other without. Following your advice, I successfully changed the port number on the one without Tomcat.
On the one with Tomcat, I believe it was because I installed the 10g express while the Tomcat was running, I can neither go to the 10g's home page (page cannot be displyed), nor logon to the database from sqlplus (ora-12560: TNS:protocal error) even after I shut down the Tomcat. By checking with 'netstat -an', it is known that the http listerner is not listerning.
Can I change some configuration file to solve this problem? Or do I have to reinstall 10 ex? I prefer the 1st aproach of changing config file, even it is not as easy as reinstallation.
Thanks
jl

Web Enterprise Manager Default Port Number in Oracle 9i

Enabeling Auditing on database 9.2.0.8
Web Enterprise Manager Default Port Number in Oracle 9i:
Does anyone know the default port number of the web enterprise manager (Oracle 9i)?
If I installed or configured enterprise manager and I forgot the port, where can I find it?

You must read the part in the Installation Documentation for certified repository databases to ensure that your database is OK.
My advice is always, never start any installation (not only Oracle) without reading the Documentation, Release Note and any README.
You will spend less time in the installation as Configuration if you use the required documentations for your platform.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

Changing port number for mobile server after installation

hi,
i am using windows 2003 server release 2,oracle 11g database R2 and oracle database lite 10g R3. i have installed mobile server successfully with port 80 but when i start the mobile server i receive an error stating that the port 80 is already in use. Now i need to change the port number of the mobile server. can anyone tell me the solution.

If the Oracle Lite installation type is STANDALONE , then to change the Olite port number to any other available free port number , you have to edit the file default-web-site.xml or http-web-site.xml file present in $OLITE_HOME/mobile_oc4j/j2ee/mobileserver/config directory.
You can change the port any time in http-web-site.xml file and bounce the services, the new port will take effect.

Change the Default Page Size for WebI Rich Client 4.0

Hi:
I am trying to change the default paper size for Webi Rich Client 4.0.
In 3.x you made the changes to the defaultconfig.xml located in the path C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\classes\AppletConfig.
In 4.0 I canu2019t seem to locate the file, can you advise if the file is the same name and where the file located.
Thanks
Brad

Hi,
Please check out the User Guide - see section Web Intelligence Cascading Style Sheets (CSS)
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4_ia_en.pdf
Regards
H

Profile Manager: Change default ports (80/443)?

I was never able to figure out how to do this with Mountain Lion Server (thus we were never able to utilize Profile Manager), but I'm hoping this may now be possible with Mavericks Server. Is it possible to change the default ports the Profile Manager web admin uses (80/443)? I already have another server running HTTP/HTTPS services on those ports, thus this would be a conflict.
The only other option would be purchasing a second static WAN IP, but would rather not have to do that.
Thanks,
Kristin.

Realistically you are not going to be able to change the ports used by the built-in Apple websites. Even if you managed to (briefly) do it, it is almost certain that your settings would get over-written by Apple later.
What you can do is change the port FileMaker uses. I would also say there is no benefit to running FileMaker Server on the same computer as Server.app and in fact as you have seen a potential disadvantage. Therefore using a separate Mac mini without the Server.app installed is another option.
See http://help.filemaker.com/app/answers/detail/a_id/215/~/specifying-a-port-number -for-instant-web-publishing
For what it's worth RoundCube is nothing to do with FileMaker either. If you have not already seen it you can get an easy to use installer for RoundCube here http://topicdesk.com/downloads/roundcube and it will work on the same Mac as Server.app and is compatible with the latest versions.

Is it possible to change the port number of an already installed ITS?

Hello,
I've done an install of the latest ITS stand-alone application (win2k server , IIS). It was installed on port 81.
Is there an easy way to change the port number of this ITS installation without doing a new install? I know there are port references in the itsregistrywgate.xml file but was not sure if these were maintained during install or by reading the global.srvc file entries.
I've taken the simplistic steps of changing the port number in IIS and the global.srvc file but that does not work. I get a 403.2 read access forbidden error.
Any advice would be much appreciated.
Thanks,
Graham

Hello Graham,
yes, it is possible but depends on what you want.
For IIS, WGate is depending on the following items:
ISAPI wgate (the filter API that triggers on /scripts/wgate) which is normally a general isapi for all webserver instances.
the virtual directory "SAP-WGate-Scripts" which exists for the according "virtual" webserver instance.
the (web)servername in wgate registry, which points to your virtual webserver
the "Port" in the URL section in wgate registry.
So, if you want to change the port (e.g. from 81 to 82) for both your virtual webserver and the wgate then go ahead.
But if you want an extra virtual host (e.g. on 82) then:
create the virtual host on 82
create a "SAP-WGate-Scripts" directory on this 82 host exactly as the one on the 81 host.
change the "Port" in the wgate URL section.
if you also have an own docroot directory you have to copy the SAP mimes from the 81 docroot to the new one.
The only thing that will be wrong afterwards is the webservername, this will have no effect on the runtime behavior but at the next patch install you will get an extra dialog to identify your webserver again.
If you wanted to go for the latter scenario then it might be less work to add a new instance by install e.g. a dual host wgate on the new virtual host or a single host install (with a dummy agate).
Afterwards you can play around with the WGate configuration to change it to your needs.
Regards,
Fekke

Change default port number for web logic!

Similar Messages

Maybe you are looking for