Change Default Print Attributes

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

Similar Messages

  • Changing default printer using CVI

    Hi All,
    I am currently developing a project using CVI 5.0.1. In this project I
    would like to allow the user to change the default printer or select the
    printer to print to.
    Can anyone help?
    Richard

    Use SetPrintAttribute on the Printer Name attribute and specify the name of
    the printer in your printer setup.
    Best Regards,
    Chris Matthews
    Measurement Studio Support Manager
    "RBL" wrote:
    >Hi All,>>I am currently developing a project using CVI 5.0.1. In this project
    I>would like to allow the user to change the default printer or select the>printer
    to print to.>>Can anyone help?>>Richard>>

  • Changing Default Print Quality for Photosmart Printers in Stand Alone mode

    Hello Everyone. I am using a group of Photosmart Printers in Stand Alone mode for events where I shoot and print on site. Although I have quite a few printers with me (6 total at a time), I prefer to have the printers print in "Normal" Print Quality Mode, instead of "Best". Images come out twice as fast, and because I have a disciplined shooting technique, I get "GREAT" results from the "Normal" setting. I and/or my assistant have to go to my "Preferences" to change my Print Quality everytime we prepare to print another batch of photos. Sometimes we have groups that will want 5 copies, and it simply takes FOREVER in Best mode, and really, although with a 5x Loupe I can tell the difference, My customers can't with their naked eye. Sometimes we forget to change the setting due to the pressure of the pace sometimes. OOPS!
    I am using the following Photosmart Printers: A516, A512v and the 335.
    As I stated, I don't use these with a computer, I drive them straight from CF Cards. I do have all the original software, if I need to use the computer to make some changes. Just tell me how. Manual says nothing about getting the setting to default to normal.
    Thank you so very much in advance.
    BLAYZE!

    Hello:
    One way of assuring high quality would be to export the photo to the desktop (at highest quality) and then print from there.
    In my own case, I find that when I occasionally print a photo from iPhoto, the quality is quite good.
    Barry

  • How to change default printer in tx me28

    Hi Experts,
    How can I change the default printer in tx me28? I have checked the customizing but I don´t know in which point I can change the default printer.
    Thanks!

    Hello,
    If the client is Windows, you can use the following:
    host('cmd /c Rundll32 Printui.dll PrintUIEntry /y /n "the_printer"');Francois

  • Changing default printer in Purchase order

    Hi
    This is Mohammed. Khan, when we are working with these purchase Order T-codes (IW32, IW21, IW28, IW38) When ever we are trying to give purchase order print, than automatically it will take $MECH,at present this printer is not available in our landscape, if there I donu2019t know where this printer is defined exactly, I am searching this particular printer in Output devices(SPAD) but this is not available in that list, can any body tell me how to change the default printer, from purchase order printing list, and also let me know how to set different printer in the place of $MECH printer..
    Thank you,
    Regards,
    Mohammed. Khan

    Hi
    Try checking NACE transaction, for your output type the default printer assigned (in communication method). And also check defaults tab in user record in SU01 tcode.
    Thanks

  • Change default page attributes

    I am trying to design a standard framework for our developers using the portal
    (e.g., standard header, footer, etc). In particular, I would like to change a
    couple of default page attributes such as "hidden" and "layout type". Any ideas
    where this could be done? Thanks.

    I never even thought of that - Word woman that I was!  Thanks so much - I shall give it a go!!

  • Changing default printing shortcuts

    I want to change the default printing shortcut.  It is currently set to "General Everyday Printing".  I would like to change it to "Fast/Economical Printng".  When I go to Preferences, Printing Shortcuts tab, and click on "Fast/Economical Printing" there is no option to make this the default shortcut.  When I click on "General Everyday Printing", change the features to resemble Fast & Economical printing, it will only save the new features under a new name, but not as a default.  
    I have an All in One J6480
    Message Edited by Holmanranch on 03-21-2009 10:04 AM
    Message Edited by Holmanranch on 03-21-2009 10:04 AM
    This question was solved.
    View Solution.

    Binary Zen,
    Thanks, but that only works for the currently selected Printing Shortcut.  Following your instructions for , say, "General everyday Printing", after going back into the Printing Preferences afer saving, if you select another Printing Shortcut (say "Fast/Economical Printing") and then back onto "General everyday Printing", the papaer size reverts to "Letter".
    Like most people in the UK, I NEVER use "Leeter" size paper.  Why is there no way to save changes to the default "Printing Shortcuts" in Vista (I believe you can in XP)?  If I pick any of the shortcuts, I have to remember to change the paper size each time.
    I have been in lengthy conversations with HP support staff, and the best they can come up with is to use the generic c990 printer driver (which obviously has limited functionality).

  • Change default print settings

    I want to change the default print settings on Firefox 6.0.2 such that the headres, footers, etc. are not printed when I print a web page.

    Firefox button > Print -> Page Setup

  • Change default print settings in PS

    I was wondering if anyone knows how I could change the default print settings so that crop marks and labels are turned on by default.  I've tried using automator, and making an action but haven't had any luck.  Thanks.
    Marcus

    anyone??
    It would also be nice to have a default set of commands under print settings, like paper size, media type, color management, etc.

  • Change default pabURI attribute

    Hi every one,
    I did a dedicated instance of Directory Server for Address Book listening on the same ip address but 1389 port.
    When i create a new mail user from Delegated Administrator, it assign to the user a pabURI attribute like this:
    pabURI: ldap://mailbe1-ds:389/ou=user,ou=People,o=mailservice
    I need to change default pabURI on DA from the one listed above to the following:
    pabURI: ldap://mailbe1-ds:1389/ou=user,ou=People,o=mailservice
    which file i need to modify ???
    Regards
    Caius

    Solved, changing messagging parameter "local.service.pab.ldapport" with configutil.
    It's not the DA to set pabURI attribute in user profile.
    BYE
    Caius

  • Changing Default Printer

    Hi Oracle Masters,
    Is there any way to get the default printer name at runtime, so that to specify it in DESNAME ??
    As i want to assign different printer to specific module in my application.
    Thank You

    So, you're using Webforms. Just to clear something out, which default printer name do you mean? The Server default printer or the client?
    You're sure aware that the Reports Server is running on the server, and therefore you must mean the default printer of the server. Right? Since the default printer almost never change, I would create a key in $ORACLE_HOME/reports/conf/cgicmd.dat and use this when printing.
    //Martin

  • Mac OSX Reader 10.1.2 – Cannot Change Default Printer From "Any Printer"

    With Mac Acrobat Reader 9.x it was possible to use Page Setup to set the default printer from “Any Printer” to one of our choice.  Once set it was possible to print many documents without having to go back and reset it every time.  In other words it would ‘remember’ the setting.
    Mac Acrobat Reader 10.1.2 does not remember the setting of the printer in the Page Setup dialogue and keeps reverting to "Any Printer" between printing; either from the same document or multiple documents.  Thus on each occasion I need to print I need to go to Page setup and reselect the printer.  Irritating, and time wasting.
    Now this would not matter if there were not a slight, but nevertheless significant, improvement in print quality between a document printed with the correct printer and “Any Printer” selected in Page Setup.
    NOW, before you all jump in with suggestions read this:
    1:  I do have the printer selected as the default printer in System Preferences (no difference anyway).
    2:  Selecting printer in the Print dialogue makes no difference to the print quality.  It MUST be selected in Page Setup.
    ADOBE, can you please get Mac Acrobat Reader X (10.x) to revert to the same behaviour as Reader 9.x ?
    Thank you.

    The same problem exists in Reader 11.0 for Mac.  In my case, it defaults to our specialty photo printer instead of the workhorse laserprinter.

  • EPSON Stylus Color 1160 changing default print quality under 10.4

    Greetings.
    I have the above printer and since Epson no longer produces a driver that will function under 10.4 I am using the Gimp driver. Which works fine.
    The printer is connected to our server and so functions as a ‘shared printer’ in the network. The server runs 10.4.8.
    However I would like to tweak the default settings for all users.
    One of the things we use this printer for is to make drafts for checking text or layouts. The default setting is for an excellent print quality. I would like to change this to a lower resolution (saves ink > saves money > saves planet > reduces carbon footprint, ;-)))
    Anybody knows how to do this?
    Thanks

    Greg good morning,
    It did solve it partly. Here is what I have now. If printing directly from the computer the printer is connected from now is no problem, the settings have changed.
    However as this is my server (the Epson is connected to it via USB) printing from the other machines have not changed the standard dialog box.
    When I try access the Epson setup via http://127.0.0.1:631/printers on the individual computers I get:
    Forbidden. You don't have permission to access the resource on this server. <</div>
    Any suggestions as to how to solve this so I have there also the standard box changed? Reason is of course that on the individual computers the dialog is generated locally and their settings are following the standard rule than send to the printer, bypassing the setting of the printer. So question is, how to get in to this dialogue?

  • How do i change default printer settings

    Hi
    I have an Epson Photo PX720WD.
    When I print photos directly from Finder they always print on the A4 plain paper I have in the tray rather than the 6 x 4 photo paper I want them to. The print option in Finder doesn't give me any opportuntiy to select settings like, for instance, iPhoto.
    I don't want to import all pics into iPhoto as i like being able to print them from Finder so does anyone know how I can change the settings, preferably to make the 6 x photo setting the deafult?
    Thanks in advance
    Steve

    Hi Eustace
    thanks for the reply.......I'm on 10.7.5 but I think the issue is that I'm not printing from an App, I want to print direct from Finder and when I select cmd/p or go through the file menu and select print the dialogue box doesn't appear or isn't an option.
    On all Apps that I've printed from cmd/p brings up the dialogue box or going to the file menu the print option looks like this:
    Print....
    Direct from Finder there are no dots meaning no dialogue box will appear.
    I have about 50 pics I want to print so if I can change the default settings then I can simply cmd/p every time knowing that they'll print the way I want them.
    I would also like to change the default settings as I print pics about 95% of the time so it's less hassle to change it when I want a plain A4 print.
    Any ideas?!!
    Thanks again
    Steve

  • How do I change default printer settings in Lion?

    I just got a new MacBook Pro and after installing the correct drivers and setting up my printer, it now prints 2-sided by default.  How do I change this default setting?
    I'm using a MacBook Pro, OS X 10.7.4, printing over AirPort to a KonicaMinolta office machine.  I had this same setup with my old MBP (OS X 10.6.8) with no problems whatsoever.

    Many vendors have started releasing printer drivers that have been defaulted to two-sided (duplexed). I would assume that the printer driver you are using on 10.6 is an older version compared to that being used on Lion.
    There are two possible actions. One is to create a Preset that has the driver set to single sided and use this preset when you don't want duplex. The other is to modify the PPD for the printer so that it is set to single sided by default.
    Making a Preset is easy. Open a document and select to print. Make the changes in the print dialog to set single sided printing and then open the Presets menu and choose to save this change for this KM printer. Then whenever you print to the KM just ensure the Preset is set to whatever name you gave to the single sided setting.
    As for modifying the PPD, this is done via the CUPS web page.
    To access CUPS, open Safari and type
    http://127.0.0.1:631/printers
    This will open the CUPS Printer administration page and will show all the printers currently configured on the Mac. For the printer that you wish to change the defaults for, click its name in the Queue Name column.
    Clicking the printer name will open the printer administration page for that printer. Here you need to click on the Administration drop menu and then select Set Default Options.
    This will show a new page with four menu headings (links); Options Installed, General, Banners and Policies. Select General. Scroll down the list until you find an entry like "Finishing" or something similar that shows the single sided and two sided setting. Change this from 2 sided to 1 sided.
    With the option selected you then need to scroll down the list to the bottom of the page where you will see the ‘Set Default Options’ button. Click this button and you will then be presented with an authentication window. Enter the account name and password that has been set as the admin for this Mac. And then press the Log In button. You will then see another page stating that the information change is completed.
    Now you can open an application and select to print and then check the output is set to single sided.

Maybe you are looking for