Change default refresh rates reports

Hi!!!
In SQL Developer yo have the option to refresh a Report choosing among 5, 10,
15, 20, 25, 30, 60, 120.
Is is possible to change that default values?????
Thanks a lot!
Jose.

Please put your feature requests on the announced SQL Developer Exchange...
K.

Similar Messages

What is the defaults refresh rate of the Mac book pro 15inch?

What is the defaults refresh rate of the Mac book pro 15inch? and how can I change it?

I don't believe there is a refresh rate for LCD or LED monitors. Refresh rate is something that is used for old style CRTs if i'm not mistaken.

How Can I change my refresh rate to 75hz for on LCD using 91.47 drivers?

HI,
I use a 19" LCD and have always changed my refresh rate to 75hz to avoid ghosting in games like fifa 06 (60hz causes a nasty ghost on my 8ms panel). I have been using the 81.98 drivers and could create an override to use 75. The new driver will allow me to change the refresh rate to 75, but will not let me use it - I get the message "The custom resolution cannot be added". I have coolbits2 installed. Is there a registry setting that I can add to allow me to change the refresh rate? If not, I'll just go back to the 81.98. I am also using the DVI connection.
Thank you,
* This is on my Sli PC in my sig. *

I know that on my particular LCD monitor, if I go above the recommended rates, then the screen will just go black and won't let me see anything. Usually it displays a message telling me that it cannot display. I think it especially does this with the DVI connection.
You may have tried it allready, but just make sure that in your display properties you have unchecked the option to only display resolutions allowed by the monitor.
You may also want to try and see if it will let you do it with a VGA connection instead of the DVI.
Otherwise, you just may have to go back to the earlier driver.

How do i change my refresh rate

hi all i have a new Imac i need to change my refresh rate , i have looked in system prefernces etc

There is 3rd party software like Switch ResX that lets you set custom resolutions and refresh rates. I run my 15" rMBP at 48Hz since I edit and watch nearly everything 24fps and it helps reduce GPU strain. I can also set external displays to custom resolutions that they may not support officially, for example my LCD TV supports 48Hz in addition to 24, 50, 60Hz, etc.

Changing default sample rate breaks Pulseaudio

When I change default sample rate from s16le to s24le which my card supports (and it always worked under Ubuntu) Pulseaudio goes bananas and doesn't play any sound in Firefox and Spotify, but works in Audacious or for system sounds (like speaker test from Gnome settings).
Output of pulseaudio -vvvv in default settings:
http://pastebin.com/zJiAi0T2
Output with default sample rate set to s24le:
http://pastebin.com/SKWjcg19
Last edited by gutigen (2014-11-15 22:32:45)

Thanks. That will also be nice in that I won't have to re-do all of my saved screensets every time.
Is there an easy way to open templates? I ask because Logic requires them to be saved to the "Project Template" folder, whereas I have all of my music stuff saved on an external firewire drive. Also, templates don't appear to show up under the "open recent" menu so I'm wondering if I'm going to have to go into that folder every time I need to use that template.

How to change default output XMLP report to rtf/excel !

I used xmlp 5.6.2
The default output for report is pdf file.
Now i want to change default output to rtf or excel file
Please ! help me !

Hi Brightsea,
We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
we are getting the following error.
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
{\rtf1\ansi\deff0"
^
Regards,
suresh.

How to change screen refresh rate in windows 7sp1 and windows 8.1 iso image using dism

sir when i install windows 7sp1 and windows 8.1 then after the completion of setup when first time windows boots up then task bar is not shown and display is not clear and when i check under monitor settings the screen refresh rate is 60 Hertz and when i
set the screen refresh rate from 60 Hertz to 75 Hertz, then everything is OK, plz tell me why this happens?
why windows 7 sp1 and windows 8.1 automatically sets the screen refresh rate to 60Hertz instead of 75Hertz.
how can i set screen refresh rate 75 Hertz permanently in iso image using DISM ?

That is not a function of DISM. Resolution and refresh rate capabilities can be determined by multiple causes. Drivers are one, another is that most modern displays will report their capabilities to Windows.
You can specify display settings with an answer file however:
<Display>
<HorizontalResolution>640</HorizontalResolution>
<VerticalResolution>480</VerticalResolution>
<ColorDepth>16</ColorDepth>
<RefreshRate>60</RefreshRate>
</Display>
http://technet.microsoft.com/en-us/library/ff716344.aspx

Changing default refresh time for the UWL.

Hello,
I am trying to change the Default refresh time for the UWL(workflow inbox) for all the users before they personalize or save the refresh time, Would changing the refresh time in the .xml file work or is there any other way to do it? Thanks,
Aniketh R.

We have had all sorts of issues with this as well. I have been unable to find a solution that works as of yet. From my own debugging it seems as if RP is trying to parse the pasted text as logo's, fields etc.... I am looking at potentially using a script w/ set interval to "clean" the clipboard data but this isn't a perfect solution for numerous reasons.
What is happening to your letters when the users paste? Our letters actually become unusable after a plugin save. So I am actually very interested in the answer to this question!

Change Default message for report total: in reports

Hi,
I want to change the message for subtotals in the report i.e "report total"
pls help me
tnks
mani

Go to Shared Components>Text Messages and find Message Name "REPORT_TOTAL" and set correct string for your language.

Changing Default Sample Rate Settings?

Hello,
When I open up a new song in Logic it always defaults to 44.1. Sometimes I forget to switch it to 96 before recording only to discover later that I am going to have to convert the files or re-record. Is there a way to set a "default" so the sample rate is always at 96 when I start a new song? Thanks.

Thanks. That will also be nice in that I won't have to re-do all of my saved screensets every time.
Is there an easy way to open templates? I ask because Logic requires them to be saved to the "Project Template" folder, whereas I have all of my music stuff saved on an external firewire drive. Also, templates don't appear to show up under the "open recent" menu so I'm wondering if I'm going to have to go into that folder every time I need to use that template.

Changing default monitor refresh rate

Hello-
I have just installed x86 Solaris8 on my system at home. I have a TNT2 Ultra card and I am using the default Nvidia TNT2 drivers included with the install on a Hitachi Superscan Monitor. I am capable of displaying the Solaris CDE at 1600x1200 but I have display issuesthat force me to reset my vertical and horizontal positioning every time I turn on the monitor or ever time the screen resolution changes.
This problem has existed ever since I got my videocard back whenI still had Win98 on the machine. The only way to correct it was to set the default refresh rate for all resolutions to 60Hz.
Is it possible to do this in Solaris8 and how?
Any assistance will be greatly appreciated!
Thank you,
Daniel J. Noah

stop the dtlogin, login on the text console, and run kdmconfig.
In kdmconfig, choose the video card menu entry, don't make changes
to the video card but use on of the multifrequency monitor entries.
For example, the multifrequency monitor entry upto 110kHz should give
~85 Hz refresh rate at 1600x1200, use one of lower freq. entries to
tune down the refresh rate...

How to change the UWL refresh rate for all portal users.

Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.

1.      Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
      From the Universal Worklist Systems, choose the system for which you want to edit the properties.
    Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju

OS 10.3.9 defaults to a refresh rate that is too high for my monitor.

Hello experts!
I bought a great little NOVA 15" LCD VGA monitor which I love since it has a TV tuner built-in. It is capable of 1024 * 768 @ 56 to 75 Hz. Unfortunately, from start-up Panther uses a default of 85 Hz whenever this monitor is the only one attached, and nothing gets displayed.
I can leave the Mac on and swap VGA out to my old Apple 15" Multi-scan and the desktop is there. Now that I can see what I'm doing, I can change the refresh rate from 85 Hz to 75 or 70 or 60 Hz. Still leaving the Mac on and switching the VGA output back to the NOVA LCD results in a normally displayed picture at any of the 3 lower refresh rates. But if I open Display Preferences and press the Detect Displays button, the desktop disappears and the NOVA monitor indicates "no signal." As you may have guessed, Panther is trying to give it 85 Hz again.
The monitor is DDC 1/2b compatible, and the ATI 9200 is DDC 2a/b compatible, so they should be sending the right info to each-other.
What I would like is for someone to tell me how to make the Finder change the Monitor settings to 1024 * 768 @ 70 Hz in a way that can be assigned to a Function key (say F5). That way, when the Mac has finished starting-up, I can just press F5, and even though the screen is blank the Finder will run a little program to change the monitor settings and, voila, I will have a working display.
I have looked into Apple Script, but it seems to have no control over this sort of function (unless I have missed something).
Many thanks in advance, and Happy New Year!
1.1GHz G3 B&W, ATI 9200, 512MB RAM Mac OS X (10.3.9) Logitech gaming mouse MX510

The router is much, much newer than the computer, perhaps some characteristic of the WiFi network as it's currently setup is preventing the computer from connecting.
Try to go back to the basics: set your WiFi network to "b" mode only (i.e., turn off "g") and termporarily remove the password from it. See if the computer will at least establish a connection at that point. Then start turning on one thing at a time ("g" mode, then security, etc).
Not sure what format your WEP key is, but if it's not 10 characters (the minimum for the standard, which constitutes a 64-bit key), you can try making it that long. If it's 13 or 26 characters, it might be a higher encryption than the computer can support.
If all else fails, you could try looking on ebay/craigslist for a copy of Tiger to install on the iMac, which would have software support for more WiFi encryption schemes. Also, it would provide software support for USB WiFi adapters that would also be able to connect to more modern networks.

X misdetects LG Flatron F700B as 775FT - 50hz refresh rate

Hi;
I acquired a LG Flatron F700B today and hooked it up (nice, sharp picture, much nicer to stare at than my venerable, fuzzy Benq V772.) The issue here is that according to nvidia-settings, my computer thinks that this is a LG 775FT.
This wouldn't be so bad, but there's a distinct difference in specifications between the two monitors - the F700B does max. 1280x1024 @ 85Hz, but the 775FT (which X seems to think I have) only does 1280x1024 @ 60Hz. Interestingly, xrandr reports the maximum resolution as 1280x1024 @ 50Hz.
As you can imagine, 50/60Hz makes ones eyes bleed... I've tried editing the Monitor section in xorg.conf with appropriate sync ranges taken from the monitor specs at link [1], but apparently new versions of X just go ahead and autodetect the monitor anyway, which is actually working against me here (autodetection is nice, but only when it detects the Right Thing.)
nvidia-settings only lets me push the monitor up to 60hz.
Does anyone have any suggestions as to how I can 'persuade' X that my monitor Really Can Do 1028x1024 @ 85hz? I'm tempted to take a cudgel to it and see if it plays nice
Cheers;
-lws
[1] : http://www.superwarehouse.com/LG_Electr … /ps/141938

Nvidia actually uses refresh rate to report a completely different property, something to do with twinview mode and compatibility with TVs and such - that's why you shouldn't really worry about what xrandr says... You can use nvidia-settings to see what the actual refresh rate is, it most certainly isn't 50hz. If that figure bothers you you can add something like this to the device section in xorg:
Option "DynamicTwinView" "False"
This will not actually change how the image is displayed but it will make xrandr return the actuall refresh value.
This is what nvidia manual has to say about this:
Option "DynamicTwinView" "boolean"
Enable or disable support for dynamically configuring TwinView on this X screen. When DynamicTwinView is enabled (the default), the refresh rate of a mode (reported through XF86VidMode or XRandR) does not correctly report the refresh rate, but instead is a unique number such that each MetaMode has a different value. This is to guarantee that MetaModes can be uniquely identified by XRandR.
When DynamicTwinView is disabled, the refresh rate reported through XRandR will be accurate, but NV-CONTROL clients such as nvidia-settings will not be able to dynamically manipulate the X screen's MetaModes. TwinView can still be configured from the X config file when DynamicTwinView is disabled.
Default: DynamicTwinView is enabled.

T61p Wuxga display refresh rates

Hi!
I suspect that my GNU/Linux installation sets the wrong refresh rates for my 15.4" WUXGA 1920x1200 display. It sets the vertical rate at 50, which seems very low.
I can't seem to find what the correct rates are in the documentation that came with the computer. Does anyone know? If you don't know the horizontal rate, I'm still interested in the vertical rate. What does Vista set? (I removed Vista, so I can't check myself.)
Please help!

Adamaxus -- searching the web I find a lot of such claims. I didn't know this. But I do know from my own experience that vertrefresh has a huge impact on my stationary lcd monitor. Are there different kinds of lcds that behave differently in respect to vertrefresh?
Anyway, I don't have any flicker on my T61p screen. It only bothers me that xorg and nvidia-settings report different refresh rates, and that some GL applications might get the wrong info and slow down because of it.This is one of the explanations floating around the net for slow gl desktops on T61p.
If 50 is the default refresh rate, I would think that xorg is right and nvidia-settings is wrong (it reports 60).

Change default refresh rates reports

Similar Messages

Maybe you are looking for