Change default URL in webdynpro

Hi,
I have created a sample demo application in webdynpro.
When i run the application the default url is:
http://<server-name>:<port>/webdynpro/dispatcher/demo.sap.cg.com/demoproject/Demoapplication?SAPtestId=24
Can I configure this url by any chance something like this...
http://<server-name>:<port>/myapplication/
Please suggest.

Hi patana
U can not change the URL of ur application.......
Also for more information check this link
http://help.sap.com/saphelp_nw04s/helpdata/en/8c/780741375cf16fe10000000a1550b0/frameset.htm
Regards
Ruturaj

Similar Messages

Change default url in link inspector

Whenever I want to create a link to an external page, it is necessary to remove http://livepage.apple.com from the url box. Is there any way to change this default or at least have a blank in the box. It is cumbersome to have to constantly remove then re-enter data.

Thanks for the reply... I will stop looking.
I did find a less than optimal solution. If you create the link url information in another document such as a .txt file then select all and copy, the characters will automatically replace the liveapple.com in the url inspector box when the "enable as a hyperlink" box is checked for an external page. Not very smooth but it works if a lot of the links are to the same or similar url's. I will put it on the wish list.
Thanks again

I have firefox 7.0 and i go to about:config and change the URL default from bing to google but when i close firefox an open it back up it changes back to bing why is this?

I have firefox 7.0 and i go to about:config and change the URL default from bing to google but when i close firefox an open it back up it changes back to bing why is this? I stand by google 100% and if ur gonna make it where i can't use google as the URL's seach engine then i will uninstall it.

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref network.http.max-connections from 256 to 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

How can I change the default URL in hyperlink inspector

How can I change the default URL for link to external page in the Hyperlink Inspector?

You can't change the default url in the inspector.. but an easier way to do it rather than editing the box everytime you need to build a link is to copy the url you want to link to and then highlight the text or image that users will click on and then click enable hyperlink.. when you do that whatever the last url you copied using "command" "C" will automatically be entered into that box and replace "livepage.apple.com"
It saves alot of time if you are doing alot of links.
Hope This Helps!

Changing User's default URL in Portal Server

Would appreciate if somebody can tell how to change the user's default URL. This is the URL to which user is forwarded to after authentication is over. By default this is the DesktopServlet. I have tried changing it in the Users profile, but it doesn't seem to work. Seems to get overridden by something
else. We are doing Ldap auth. Is there a properties file or something that has the info about forwarding? My guess is the Ldap authenticator is forwarding it to DesktopServlet without looking up the user's profile
setting.
We want to send it to our Servlet before redirecting it to the Desktopservlet.
Any pointers would be helpful.
thanks
shekar

Did you try at the domain level?
By logging into admin console, then click Manage Domains -> Select the Domain -> User -> Show Advanced Options and change User's Default URL.
Sundar

Changing XE URL settings from default

Hey guys,
I want to change the url of my XE pages from http://localhost:8080/htmldb/aa.bb.cc to http://localhost:8080/htmldb/aa/bb.cc
Is there an easy way to do this?
Thanks,
Niall

Well, I guess I would start off with installing an Apache and configuring this one as a proxy to XE:
HTTPS with Oracle XE ?
Then you would have to modify the rewrite rules for achieving your result, e.g. check the example rules here (user friendly urls): http://www.ilovejackdaniels.com/cheat-sheets/mod_rewrite-cheat-sheet/
There are tons on information on how to use mod_rewrite.
What are you trying to achieve? Are you trying to change urls for calling stored procedures or an Apex/HTML DB application?
~Dietmar.

How do I use Sun Web Server 7.0u1 reverse proxy to change public URLs?

Some of our installations use the Sun Web Server 7.0 (update 1, usually)
for hosting some of the public resource and reverse-proxying other parts
of the URI namespace from other backend servers (content, application
and other types of servers).
So far every type of backend server served a unique part of the namespace
and there was no collision of names, and the backend resources were
published in a one-to-one manner. That is, a backend resource like, say,
http://appserver:8080/content/page.html would be published in the internet
as http://www.publicsite.com/content/page.html
I was recently asked to research whether we can rename some parts of
the public URI namespace, to publish some or all resources as, say,
http://www.publicsite.com/data/page.html while using the same backend
resources.
Another quest, possibly related in solution, was to make a tidy url for the
first page the user opens of the site. That is, in the current solution when
a visitor types the url "www.publicsite.com" in his or her browser, our web
server returns an HTTP-302 redirect to the actual first page URL, so the
browser sends a second request (and changes the URL in its location bar).
One customer said that it is not "tidy". They don't want the URL to change
right upon first rendering the page. They want the root page to be rendered
instantly i the first HTTP request.
So far I found that I can't solve these problems. I believe these problems
share a solution because it relies on ability to control the actual URI strings
requested by Sun Web Server from backend servers.
Some details follow, now:
It seems that the reverse proxy (Service fn="service-passthrough") takes
only the $uri value which was originally requested by the browser. I didn't
yet manage to override this value while processing a request, not even if
I "restart" a request. Turning the error log up to "finest" I see that even
when making the "service-passthrough" operation, the Sun Web Server
still remembers that the request was for "/test" (in my test case below);
it does indeed ask the backend server for an URI "/test" and that fails.
[04/Mar/2009:21:45:34] finest (25095) www.publicsite.com: for host xx.xx.xx.83
trying to GET /content/MainPage.html while trying to GET /test, func_exec reports:
fn="service-passthrough" rewrite-host="true" rewrite-location="true"
servers="http://10.16.2.127:8080" Directive="Service" DaemonPool="2b1348"
returned 0 (REQ_PROCEED)My obj.conf file currently has simple clauses like this:
# this causes /content/* to be taken from another (backend) server
NameTrans fn="assign-name" from="/content" name="content-test" nostat="/content"
# this causes requests to site root to be HTTP-redirected to a certain page URI
<If $uri =~ '^/$'>
 NameTrans fn="redirect"
 url="http://www.publicsite.com/content/MainPage.html"
</If>
<Object name="content-test">
### This maps http://public/content/* to http://10.16.2.127:8080/content/*
### Somehow the desired solution should instead map http://public/data/* to http://10.16.2.127:8080/content/*
 Service fn="service-passthrough" rewrite-host="true" rewrite-location="true" servers="http://10.16.2.127:8080"
 Service fn="set-variable" set-srvhdrs="host=www.publicsite.com:80"
</Object>
I have also tried "restart"ing the request like this:
 NameTrans fn="restart" uri="/data"or desperately trying to set the new request uri like this:
 Service fn="set-variable" uri="/magnoliaPublic/Main.html"Thanks for any ideas (including a statement whether this can be done at all
in some version of Sun Web Server 7.0 or its opensourced siblings) ;)
//Jim

Some of our installations use the Sun Web Server 7.0 (update 1, usually)please plan on installing the latest service pack - 7.0 Update 4. these updates addresses potentially critical bug fixes.
I was recently asked to research whether we can rename some parts of
the public URI namespace, to publish some or all resources as, say,
http://www.publicsite.com/data/page.html while using the same backend
resources.> now, if all the resources are under say /data, then how will you know which pages need to be sent to which back end resources. i guess, you probably meant to check for /data/page.html should go to <back-end>/content/page.html
yes, you could do something like
- edit your corresponding obj.conf (<hostname>-obj.conf or obj.conf depending on your configuration)
<Object name=¨default¨>
<If $uri = ¨/page/¨>
#move this nametrans SAF (for map directive - which is for reverse proxy within <if> clause)
NameTrans.. fn=map
</If
</Object>
and you could do https-<hostname>/bin/reconfig (dynamic reconfiguration) to check out if this is what you wanted. also, you might want to move config/server.xml <log-level> to finest and do your configuration . this way, you would get enough information on what is going on within your server logs.
finally,when you are satisfied, you might have to run the following command to make your manual change into admin config repository.
<install-root>/bin/wadm pull-config user=admin config=<hostname> <hostname>
<install-root>/bin/wadm deploy-config --user=admin <hostname>
you might want to check out this for more info on how you could use <if> else condition to handle your requirement.
http://docs.sun.com/app/docs/doc/820-6599/gdaer?a=view
finally, you might want to refer to this doc - which explains on ws7 request processing overview. this should provide you with some pointers as to what these different directives mean
http://docs.sun.com/app/docs/doc/820-6599/gbysz?a=view
>
One customer said that it is not "tidy". They don't want the URL to change
right upon first rendering the page. They want the root page to be rendered
instantly i the first HTTP request.
please check out the rewrite / restart SAF. this should help you.
http://docs.sun.com/app/docs/doc/820-6599/gdada?a=view
pl. understand that - like with more web servers - ordering of directives is very important within obj.conf. so, you might want to make sure that you verify the obj.conf directive ordering is what you want it to do..
It seems that the reverse proxy (Service fn="service-passthrough") takes
only the $uri value which was originally requested by the browser. I didn't
yet manage to override this value while processing a request, not even if
I "restart" a request. Turning the error log up to "finest" I see that even
when making the "service-passthrough" operation, the Sun Web Server
still remembers that the request was for "/test" (in my test case below);
it does indeed ask the backend server for an URI "/test" and that fails.
now, you are in the totally wrong direction. web server 7 includes a highly integrated reverse proxy solution compared to 6.1. unlike 6.1, you don´t have to download a separate plugin . however, you will need to manually migrate your 6.1 based reverse proxy settings into 7.0. please check out this blog link on how to set up a reverse proxy
http://blogs.sun.com/amit/entry/setting_up_a_reverse_proxy
feel free to post to us if you need any futher help
you are probably better off - starting fresh
- install ws7u4
- use gui or CLI to create a reverse proxy and map one on one - say content
http://docs.sun.com/app/docs/doc/820-6601/create-reverse-proxy-1?a=view
if you don´t plan on using ws7 integrated web container (ability to process jsp/servlet), then you could disable java support as well. this should reduce your server memory footprint
<install-root>/bin/wadm disable-java user=admin config=<hostname>
<install-root>/bin/wadm create-reverse-proxy user=admin uri-prefix=/content server=<http://your back end server/ config=<hostname> --vs=<hostname>
<install-root>/bin/wadm deploy-config --user=admin <hostname>
now, you can check out the regular express processing and <if> syntax from our docs and try it out within <https-<hostname>/config/<hostname>-obj.conf> file and restart the server. pl. note that once you disable java, ws7 admin server creates <vs>-obj.conf and you need to edit this file and not default obj.conf for your changes to be read by server.
>
I have also tried "restart"ing the request like this:
NameTrans fn="restart" uri="/data"
ordering is very important here... you need to do this some thing like
<Object name=default>
<If not $restarted>
NameTrans fn=restart uri from=/¨ uri=/foo.
</If>

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

How to change the url of "Add New Item" of a particular list in SharePoint 2013???

Hi Guys,
How to change the url of "Add New Item" of a particular list in SharePoint 2013???
I need to redirect it into the page where I have created my Visual web part.
Please suggest
Warm Regards,
Tony Joy

Hi,
There are multiple ways to change the form url like javascript, SharePoint designer, custom code, editing default form to have custom web part etc, Please follow the url below that describe diffent methods and steps
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec2769a0-683c-4023-8804-b596e4f92a3a/change-default-forms-on-custom-list?forum=sharepointcustomizationlegacy
Hope it helps!!!
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet

How do I change default search engine in address bar?

I know in previous incarnations of Foxfire I could use about:config and change Keyworld.url to change my default search engine. I recently reset my Foxfire because I've been having issues with the Origin website and.. now it's defaulted back to Google. I do not want to use google. How do I change this? I do not want a search bar, I do not wanna change things in a search bar. I just want the address bar to work the way I've always had it work for me before. Can ANYBODY help me?

That does not help me at all. I do not want the Search Bar. I don't wanna change the default on the search bar. Why would ANYONE want a search bar when the address bar does the searching for you?
I want to change the default on the ADDRESS bar. The main bar and only bar I have. The one that if you type in anything, it automatically searches Google and there seems to be no way to change it. You could change it before by going to about:config and changing Keyword.url, but Foxfire removed that. Now.. I want to take the Address bar off it's default of Google and switch it to something else.
Once again, I want NOTHING to do with the Search Bar. I don't want it, don't want to change what it searches, nothing. I never use it and never have. I want to change the ADDRESS bar's default search.

Change default selection of radio buttom

Hi Experts,i want to enhance standard component in webdynpro.in that i want to change default selection of radio button in 1 view.please help out..
Thanks & Regards
Prasad

Hi durga prasad,
Radio Button Group By Key will get the values from domain of the data element used in attribute which is binded to Radio Button Group By Key property 'selectedKey' .
That is why we don't have any code in wd_do_init method.
So you need to go to the domain and check the domain value of the data element used, and then set the default value of your interest in existing standard program using WDDOINIT---> Post Exit method as said by Naveen and Abhijeet.
You have to set the attribute binded to Radio Button Group By Key property 'selectedKey' with same domain value you want to set as default.
The following link will help you to understand how 'Radio Button Group By Key' works.
Radio Button Group By Key | Team ABAP
Please reply if any doubt.
cheers,
vidyasagar

Firefox changes the url of my RSS feed. How do I fix this?

It changes the URL from http://www.vict-consultancy.co.uk/rss_feed.rss to feed://www.vict-consultancy.co.uk. The result is the xml code is shown as text on the web page http://www.vict-consultancy.co.uk/rss_feed.rss
The RSS feed seems to be working properly in other browsers (IE, Safari, Opera), it's only Firefox that is doing this.

This is only a problem if you open the feed link directly in the location bar.
If a feed is added via a link tag in the page code then it should work as you can via the above posted code. 
Firefox 13 doesn't have the "subscribe to this page" icon on the Navigation Toolbar by default, so you would have to add it yourself to easily discover live feeds.
<pre><nowiki><link rel="alternate" type="application/rss+xml" href="http://www.vict-consultancy.co.uk/rss_feed.rss" />
</nowiki></pre>

Change portal URL and port number

Hello experts,
We are on EP 7.0 which is running on Solaris 5.10 and Oracle 10g.
Portal url is "http://hostname:50200/irj".
But we want to users to logon portal using "http://intranet" link.
How can we forwards portal default url to a different URL and port such as "http://intranet".
Steps should be followed in Visual Admin& Config Tool or in the Solaris system , in the network part?

The link pointed to how to change the default page of the Java engine to launch the portal. The example redirects to /irj/portal/anonymous - you just want to make it /irj/portal...
Setting up SAP Web Dispatcher is covered in SDN quite well - search for SAP Web Dispatcher in the search aree on the right. Basically it takes about 5 minutes to setup.
Cheers

Change external urls on existing deployment without user interruption

We've got a client who changed its Company Name just after the migration of 2010 => 2013.
All mailboxes are moved to 2013. Now we need to change their external/internal urls without user interruption...
Current config:
2 x Windows 2012 R2 + Exchange 2013 RU7 => 1 DAG => 2 databases (primary & archive)
External urls:
activesync.currentcompany.be
autodiscover.currentcompany.be
Internal urls:
Exchange2013.currentcompany.be
DNS records:
autodiscover SRV record for newcompanyname.be
Accounts:
[email protected]
New config:
Same servers
External urls:
activesync.newcompanyname.be
Internal urls:
exchange2013.newcompanyname.be
What is the best practice for this?

Hi,
If the domain name is changed, please check the email address policy for all domain users. If all users are using the new domain, the old domain would never be used and all DNS records have been changed to new domain, we can run the following commands to
change the URLs:
Set-ClientAccessServer -Identity CAS2013 -AutodiscoverServiceInternalUri https://exchange2013.newcompanyname.be/autodiscover/autodiscover.xml
Set-WebServicesVirtualDirectory -Identity "CAS2013\EWS (Default Web Site)" -InternalUrl https://exchange2013.newcompanyname.be/ews/exchange.asmx -ExternalUrl https://activesync.newcompanyname.be/ews/exchange.asmx
Set-OABVirtualDirectory -Identity "CAS2013\oab (Default Web Site)" -InternalUrl https://exchange2013.newcompanyname.be/oab -ExternalUrl https://activesync.newcompanyname.be/oab
Set-OwaVirtualDirectory -Identity "CAS2013\OWA (Default Web Site)" -ExternalUrl https://activesync.newcompanyname.be/owa
-InternalUrl https://exchange2013.newcompanyname.be/owa
Set-EcpVirtualDirectory -Identity "CAS2013\ecp (Default Web Site)" -ExternalUrl https://activesync.newcompanyname.be/ecp
-InternalUrl https://exchange2013.newcompanyname.be/ecp
Set-ActiveSyncVirtualDirectory -Identity “CAS2013\Microsoft-Server-ActiveSync (Default Web Site)” -ExternalUrl https://activesync.newcompanyname.be/Microsoft-Server-ActiveSync
-InternalUrl https://exchange2013.newcompanyname.be/Microsoft-Server-ActiveSync
Additionally, please create a new trusted certificate with the following namespaces:
activesync.newcompanyname.be，autodiscover.newcompanyname.be，Exchange2013.newcompanyname.be
Assign the certificate with IIS service.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Why can't change default cipersuits of JSSE by java system property?

I am using jdk1.5.0_17,Now I am trying to change default ciphersuits of JSSE by java system property,so all code can be kept unchanged.In JSSE Reference Guide I know default ciphersuits can be customized by https.cipherSuites system property.I run my program by java -Dhttps.cipherSuites=SSL_RSA_WITH_RC4_128_MD5 myProgram
but it doesn't work.the default ciphersuits of jre are always used.I am not able to change it.
any comments? your help will be appreciated.

Well that only works with HTTPS, i.e. with URLs and HttpsURLConnections. If you're using Sockets directly you have to use the API.

Change default URL in webdynpro

Similar Messages

Maybe you are looking for