Change default wireless dhcp

I want to deploy an Airport in an existing network address space of 10.90.8.0. The default wireless dhcp address space is 10.0.1..0. Can I change that default or must I reassign all ip address to conform with the Airport default?

If you configure the AirPort Express in Bridge Mode, it will pick up an IP address from your "main" router.
If you have the AirPort Express configured to provide DHCP services and hand out IP addresses, then those addresses will be limited to the 10.0.x.x range. The Express can also provide addresses in the 192.168.x.x range and 172.16.x.x range as well.

Similar Messages

I cannot change the wireless LAN encryption WEP settings

Dear all,
I have a WRC-1000 which I did not use for about year and a half. Now I reconnected the unit and during the configuration I cannot change the wireless LAN settings for security (WEP). No matter what I do it keeps stuck on 128 bit WEP.
It also does not show the WEP key settings (so the screen where I should configure the WEP key).
This is what I have done so far: Full reset, reload default configuration, updated to latest firmware. Still no change. I suspect a hardware failure. Is this a memory failure (flash)??
Can someone help me out?
Thanks in advance

Hi
Do you speak about the router settings or about the WLan setting on the notebook???
Did you try to use a Wlan connectivity tool like Intel ProSet Utility or Atheros WLan client utility?
Depending on your WLan card I would recommend checking these both tools and try to establish the WLan connection using one of these programs!

How to change default unit on Database 11g

Hi All
I'm using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0.
If I define my column:
USERID VACHAR2(8) --> Default USERID VACHAR2(8 BYTE)
How can I change default unit BYTE to CHAR as the following
USERID VACHAR2(8) --> Default USERID VACHAR(8 CHAR)
Thanks alot
Thiensu2810

I have set Database system with the following SQL:
alter system set nls_length_semantics=char;
alter session set nls_length_semantics=char;
But, It does not match.
And when I insert data, the following error occured.
SQL> insert into binhtest values('初期化パ');
ORA-12899: value too large for column string (actual: 12, maximum: 8)
I've checked value of NLS_LENGTH_SEMANTICS, it is CHAR
SQL>SHOW PARAMETER NLS_LENGTH;
NAME | TYPE | VALUE
NLS_LENGTH_SEMANTICS | String

How to change default FCoE QoS class - Nexus 5020

I see that on a Nexus 5020, the default FCoE QoS class is 50%. I am not using FCoE so I would like to adjust this value to 0%. I switch complains and says I can't change default values. How should I go about getting around this to eliminate the FCoE queue and give 100% BW to default? Thanks.

No. The default classloader is a builtin classloader in
the JRE. You can use other classloaders.
The java.net.URLClassLoader is provided in
the JDK. That's the only one. Otherwise you
should subclass ClassLoader and implement
the loadClass method (f.i.
loadClass("my.program") {
String file="my.program".replace('.','/') + ".class";
// find the file in classpath
// read the class file in a byte[]
return defineClass(byte[]);
although this is not the advised way to do it. Search the web for how to implement a classloader directly.

How to change default thresholds for some metrics of all targets.

Hi!
We have a lot of servers which have to work hard.
So, our OEM very often generates messages like these:
"EM Alert: Critical:dbsora90.tsb.kz - CPU Utilization is 99.95%, crossed warning (80) or critical (95) threshold."
"EM Alert: Critical:dbsora94.tsb.kz - Disk Device c8t60A9800043346C384C344A4A63516D6Ad0(ssd4) is 99.7% busy."
"EM Alert: Critical:dbsora94.tsb.kz - CPU Load (Run Queue Length averaged over 5 minutes) is 20.78, crossed warning (10) or critical (20) threshold."
I need to change default tresholds for mentioned metrics but I can't their defenition in SYSMAN.MGMT_*-tables or suitable settings in OEM GUI.
And I have no time to edit treshholds manually for each target. )

Modification of Metric Thresholds (as this is what you are referring to), should be done using the Metrics and Policy Settings link (to be found in the Target Home page).
Don't mess around with the SYSMAN tables!
Best thing to do here is to start using Monitoring Templates for this.
Check:
Oracle® Enterprise Manager Concepts
11g Release 11.1.0.1
http://download.oracle.com/docs/cd/E11857_01/em.111/e11982/toc.htm
Regards
Rob
http://oemgc.wordpress.com

How to change default output XMLP report to rtf/excel !

I used xmlp 5.6.2
The default output for report is pdf file.
Now i want to change default output to rtf or excel file
Please ! help me !

Hi Brightsea,
We customized the code in FNDRSRUN.fmb, But we are not able to get the output in RTF format.
Our requirement is to display the report output in .rtf or .xls(Not required to defaultly as .rtf or .xls).
we are getting the following error.
"The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://galaxian.bluestar.cvg0:8000/OA_CGI/FNDWRR.exe?t...
{\rtf1\ansi\deff0"
^
Regards,
suresh.

How to Change Default User Directory without changing System Directory

Hi Everyone,
I need to change default User Directory for my JDeveloper 11.1.1.0.2.
Default User Directory = C:/JDeveloper/mywork
Default System Directory = *<JDEV_HOME>/System*
Now I Need to Change it to
My Default User Directory = C:/Monty/JDev11g2/
But System's Default Dir = *<JDEV_HOME>/System*(Same)
For this i explicitly Set variable ide.user.dir to C:/Monty/JDev11g2/ in JDev.boot file as explained in Installation document.
Working fine but it contains System Folder too. I don't want this.
Any Help to find me separate these both as it works for Single User.
Thanks,
Fizzz...

Hi John, You must be right if i'd believe in ghost, A Ghost of System's Folder :-). Well that's true, We should ignore it. But still If someone finds any Clue then let me know.
Thanks
Fizzz...

How to change default compile directory tmp_ejb?

Dear all,
Someone knows how to change the default directory "tmp_ejb...." in WebLogic Server
7.0?
This is the default directory where WebLogic Server 7.0 generates and compiles
the EJB's declared in config.xml.
I try to specify the attribute TmpPath="ANOTHER_TMP_LOCATION_DIRECTORY_FOR_EJB"
in the EJBContainer node but still doesn't work.
The same thing happens when I test this attribute on EJBComponent declaration.
Someone knows if there is an enviroment variable that specify this tmp_ejb location
path?
It's false that the tmp_ejb is located where the config.xml file is placed.
I have 3 weblogic servers and they haven't the same behaviour.
Someone can help me??????
Thanks.

I ran into the same problem and was wondering if you got an aswer the question you posted in BEA's news group: "How to change default compile directory tmp_ejb?
Thanks

How to change default approval for ResourceAuthorizerApproval ?

Hi,
I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
If there are other solutions please share with me
Thanks
M.

How to change default Current Flag values for SCD2?

I'd be curious to find out how to change default Current Flag values for SCD2 (instead of 0/1 to use N/Y)
Probably I can change IKM module .... is there another way?
Thanks

Hi,
You need change the IKM. This values are hardcode in the IKM.
You can create a new IKM and the values used are a options of the IKM.
Regards
Edited by: Uthred on May 18, 2009 4:27 PM

How to change default save as location

hi,
how to change default save as location in acrobat 7.0?

Why is Acrobat involved in this process at all? Why don't you save directly the pdf from your email program directly where you want it to be? Acrobat is just adding another step to this process.

How to change default Ovi Player store ...

Hi,
I need help from you people.
I had installed Ovi Player. Whenever I try to open Ovi Player, the default store gets’ open is "India". I change the store location to "Germany". When I do the search for particular music, it will again take me to "India" store instead of "Germany" store. In addition, most annoying is that I have to re-login but my user id and password will not work as its different store. Also when I go via music.nokia.de and try to login, it open Ovi player and since default location is "India", it takes me to India store and my login credentials do not work.
I ask Nokia care on how to change default Ovi Player Store location but they are unable to provide any good answer.
I already un-install / re-installed but won't work. Do any of you have answer to my problem? I want my default Ovi Player location to be "Germany" instead of "India".
More information, my regional settings have location as “Germany” and language as “English”.
Please help.
Thanks for your response.
Regards,
Subhendra
Nokia N97 Black
RM-505
V12.0.026
0586701
Solved!
Go to Solution.

I had got message from Nokia on how to correct this issue. This had solved the problem. Below is the mail from them ...
Dear Chakraborty,
Thank you for your response.
This error is sometimes caused by a corrupted MDataStore.db3 file used by the Ovi Player. This file will need to be deleted with the Ovi Player closed. Then open the player and the datastore file will be rewritten by the application:
Close Ovi Music Player and delete the MDataStore.db3 file:
Vista C:\Users\<user>\AppData\Local\Nokia\Nokia Data Store\DataBase\MDataStore.db3
XP C:\Documents and Settings\<user>\Local Settings\Application Data\Nokia\Nokia Data Store\DataBase\MDataStore.db3
Both of these locations are in hidden folders. So, to view them users will need to:
Open Windows Explorer > Tools > Folder Options > View > Show Hidden Files and Folders
Once Ovi Music is opened again the MDataStore.db3 file will be rewritten to this folder.
  After that manipulation try to install the Ovi Player once again:
http://europe.nokia.com/explore-services/music/nokia-music
  Best regards
Nokia Care Team

How to change default ringtone to a custom one for IPhone 5.

I have gone into settings through Sounds made the change, but it does not register as the default even though the ringtone chosen has the checkmark beside it. Ringtone still lists the factory default under sounds & vibrations.
I am able to customize ringtones for individual contacts.

user598986 wrote:
Hi,
How to change default value in a table
I have a table TEST which has 2 fields CODE of Datatype VARCHAR2(10) and Indicator as VARCHAR2(1).
I want to change the default value using ALTER TABLE TEST of field Indicator to 'I'.
ALTER TABLE test
MODIFY (indicator DEFAULT 'I');
Incidentally, INDICATOR is a keyword in Oracle, so you may have problems using it as a column name. If so, you'll have to enclose the column name in double-quotes, and be careful to use capital letters inside the quotes.
Edited by: Frank Kulash on Aug 26, 2009 11:42 AM

How to change default english Language to Chinese in DSEE 6.0

Hi,
Anybody knows how to change language for DSEE 6.0. I want to change default language to Chinese.

What is DSEE 6.0.?

How to change Default Finder Windows Size?

Hi all:
New Finder windows show Macintosh HD and there is no problem in keeping the size or view options every time I open a new window (command + N).
I can change "New Finder windows show" to another folder and works just as well.
But when I open a folder in a new window (double click on an icon folder) the size of the window is very small and different from the window displayed by using command + N.
Finder saves and applies default view options to all windows without a problem, but not the default size or in other words:
default windows size is different from new finder windows size.
In Snow Leopard I could change default size of all windows holding down the Shift key while dragging and changing the size but in Mountain Lion it does not work.
I have also deleted all files .DS_Store but neither works.
I searched a lot but can not find a solution to this problem.
Thanks.

As far as New Finder Windows (command+N) are concerned, there's no problem.
All other folder's Finder Windows I have not modified manually are displayed with the default size shown in the attached image. That is the window size that I want to modify.
Thanks.

Change default wireless dhcp

Similar Messages

Maybe you are looking for