Change  Depreiation Posting Period

Dear Sap Friends,
I am working in a implementation project & just now I have completed my golive activities & uploaded the asset cut over data in the production server. I set the asset transfer date as 30.11.2008. while uploading the asset cut over data.
As per the asset transfer date first planned depreciation run should be in the month of December 2008 i.e. in 9th Posting Period. But when I execute (test mode) the same systems gives me an following error message
According to posting cycle, you should post period 010 next
Message no. AA683
Diagnosis
You cannot post depreciation in the period specified, as this will miss out a posting period.
System Response
No posting can be made in this period.
Procedure
According to the posting cycle, you should post period 010 next. Either enter period 010, which corresponds to the posting cycle, or request an unplanned posting run explicitly for this parameter
Even I also check that their no Depreciation Run is taken on Production Server. Now I want to post the Depreciation in the month of December 2008 i.e. in Posting Period 9th.
Please provide me the any solution on the above issue ASAP.
Thanks in Advance.
Regards,
Sandeep

Have a look in the table T093d with SE16.
It is possible that with the transport a wrong value is created in there.
For the solution seach with T093d.  There is SAP note that you can implement.
An other option is not to run period 10 but start with 11 (will post 10 and 11). You tray to to do a repeat run first in test mode for period 10

Similar Messages

  • How to change the posting periods

    HI,
    could anyone tell me that how to change the posting periods in SD module
    regards,
    chary

    Welcome to the forum
    What do you mean by this and where to change ??  Please be clear in your question.  Also before posting, please make a search in the forum
    [Forum Search |http://forums.sdn.sap.com/search!default.jspa?objID=f246]
    thanks
    G Lakshmipathi

  • I want to change the posting period

    I want to change the posting period for closed period. how can to do?. My period 2010 is in period but I want periods in months. who can I help me?

    Hi Mary.......
    One you created you can not change the type of periods of Posting Period.
    This is SAP Standard that once you created you can not change it.
    But if you have not done transactions for that period then you can remove and recreate with the period type as 12 Months...
    Regards,
    Rahul

  • Change the posting period

    Hi Gurus,
    Can any one help me with changing the posting period of the company which is by mistake take as 12/2009 and i want to change it to 08/2008. I ahve already done some material movement in this and the system is not letting me change it in OMSY. Can i use MMPV to close this period and the use MMPI to open the new period as 08/2008. As this will be in past if compared to the current period in system, will there be any problems??
    Please advise.
    Thanks in advance.
    Anoop

    It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
    In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
    If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
    If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
    Steps are as below;
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 01/03/2008 for Mar. 2008 month to be opened as of now
    That means, user can post for the month of Feb 2008 as well as Mar. 2008
    Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    XXXXXXXXXXXXXXXXXX
    Other way of doing it is follow these steps( But try this method in Sand box Only):
    1. Go to OX18, and delete the plants assigned to your CO.Cd and save.
    2. Go to OMSY and change the posting period to the one u want and save.
    3.Go to OX18 and assign the plants you have deleted in step 1.and save.
    regards,
    indranil

  • SEM-BCS Changing of posting periods

    Hi:
    In the Consolidation Monitor, by going to 'edit' function, we can open and close the posting periods.
    I have the following questions:
    a) How far we can go to open the posting periods? Say if you are in pp '7', can you open period '5' and post a manual data entry?
    b) If we make any corrections in the previous period, how does the system correct the cumulative figure in the consecutive periods?
    The above are important questions for the client and let me know your comments.
    Thanks.
    Virgo

    Hi Virgo,
    I usually have the posting period as a parameter at the top of my WB or monitor screen. I may just retype ANY OTHER PP and hit ENTER in order to enter there.
    Staying in ANY previous period I may do ANY tasks available in that period, i.e. manual entries, additional data input (with cumulative data corrections).
    But remember, if you changed something in a previous period, you MUST RERUN all the tasks in this and all consecutive periods!!! Manually!
    The system doesn't do it automatically.
    In my practice, almost all eliminating tasks/documents are to be reversed in the next period. It means that any I/U elims task run will effect the next period.
    So, be very carefully. SAP doesn't recommend to execute some separate task in previous periods. You may just broke the consistency of all consolidation.
    Hope this helps.

  • How to change the posting period !

    Hello everyone
    I get the problem with posting period. I ready open the posting period for 2014.  The posting periods should be set per month and have erroneously been defined as per year.
    I ready follow the guide, but it is only successful in my test of SAP and it is not working in our company SAP system. I can not restrict the curent posting date range to 30.04.2014 such as my picture below: Pleas help me. Thanks

    Hi Mr Son
    Nice to meet you. I read the guide about this problem and it said that we can change if we had postings in this period. And I try it in test of my SAP company and it is ok. but when i apply in my SAP company, it is not working, i don't know why. I am only normal accountant, and i don't know the user and pass to access to your link. if you are in Vietnam now, how i can contact with you? do you have any email or phone number or skype. Please help me solve this problem.
    Please check this file
    Business One in Action – How to Correct Posting Periods?
    And this is my result in testing SAP
    http://scn.sap.com/servlet/JiveServlet/showImage/2-14962466-431165/u2.png

  • How to change posting period for a company code

    Hi Gurus,
    In MIGO while doing goods receipt i get this error " Posting only possible in periods 2006/05 and 2006/04 in company code 3000"
    How to change the posting period.
    I have serched in SDN, i tried transaction MMPV, and OB52 but i am not able to change as i dont know the basics of the screen as i am ABAPER.
    Can u tell me how to change. or give sme link with some snapshots.
    Thanks

    hi
    I think you need to check your fiscal year varian before you do the MMPV. Fiscal year is set up by the FI consultant and it is deciding in which fiscal year period your current month belongs to.(Transaction -OB29)
    Ex:
    if you use K4 fiscal year variant then this october month is treated as 2010-07 period. Because the fiscal year starts from April and 2010 fiscal year starts from 2009 april.
    Calendar Year                 Fiscal year
    2009 april                =       2010 - 01
    2009 may                =       2010 - 02
    2009 Oct                 =       2010 - 07
    So first get the fiscal year and period accurately (I suggest get it from your FI guy) and put it in the MMPV
    If you accidentally close a wrong period dont forget to follow these notes too.
    545952,369637 AND 487381
    thanks & BR
    sandun

  • Change Posting Period in already posted document

    Hi,
    I wanted to check is there any process where we can change the posting period of already posted documents. The external system unfortunately sent the documents in special periods 13, but it has to be 12. Now our client wants to change the posting period to 12.
    Can anyone of you suggest a suitable way in going forward.
    Thanks,
    Srini

    Hi,
    It is not possile to change the posting period in a posted document, alternatively you can park the document form the external system and it can be posted in SAP after review by the user.
    Thanks and regards
    K.R

  • Can we change the company code posting periods to previous periods?

    Hello folks,
    I wated to change company code posting periods to previous posting periods.Right now the posting period for company code is 04/2008, and I want to make it to 10/2007. Is it possible.
    I am doing this in Dev Sand box.
    Thanks
    Ravi

    Path: SPRO->Logistics-General->Material master->Basic Settings->Maintain Company Codes for Materials Management.
    In this configuration, you can change the posting periods. As mentioned earlier in one of the replies, this change is done with utmost caution as this could result in to data inconsistencies, if left open for a longer period of time.. It is advised to change this setting when no other document postings are allowed by other users...

  • How Can I Change Posting Periods using DI

    Hello All,
    How Can I Change Posting Periopds using DI.
    When Connecting to B1 Company DB , I would like to change default Posting Periods.
    My SBO is 2005B.PL41.
    Best Regards,
    TAK

    Hi,
    Please take a look at the CompanyService Object in the DI help file. and check for the UpdateFinancePeriod method.
    Hope it helps,
    Vasu Natari.

  • How to Open and Close Posting Periods in MM

    Hi,
    I have opened posting periods for 10/2008 first and by mistake even 11/2008 and 12/2008 using MMPV.
    Now when I am trying to do PGI from VL02N, the system says postings are only possible for 11/2008 and 12/2008.
    How to close these two periods and default to 10/2008.
    Please kindly help me to solve this issue.
    Regards,
    Gopi Krishna
    SAP QA Lead

    It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
    In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
    If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
    If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
    Steps are as below;
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 01/03/2008 for Mar. 2008 month to be opened as of now
    That means, user can post for the month of Feb 2008 as well as Mar. 2008
    Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    XXXXXXXXXXXXXXXXXX
    Other way of doing it is follow these steps( But try this method in Sand box Only):
    1. Go to OX18, and delete the plants assigned to your CO.Cd and save.
    2. Go to OMSY and change the posting period to the one u want and save.
    3.Go to OX18 and assign the plants you have deleted in step 1.and save.
    regards,
    indranil

  • Opening of MM posting period

    By mistake posting period of future has been opened i.e, 09/ 2007 . Now want to close the 09/2007 posting period and open the period 06/2007. How can i do that?

    Hi,
    Is it in the live system? If not, change the posting period variant, and assgn the correct posting periods to the variant, assign the variant to your company code.
    If in the live system, tell your finance people to have a look.
    Prase

  • Re-open the Previous posting period

    hi...
    we have closed the posting period for the month of 01-02(april-may) and open the 03-04(june-july)...
    but now we want to open the previous posting period i.e. 01-02(april-may) again...so how could we do this..
    one solution i have got is that...
    1. go to OX18 delete all the assignment for that company code and plant.
    2. go to OMSY and change the posting period..
    3.  go to OX18 and reassign the plant and company code again...
    this is the right method to do that..?
    will there be any -ive implications if I open the previous period by this procedure..?
    or suggest me some other way to do that...
    Thanks in advance

    Hi
    You can open Closed MM periods but be careful because SAP does recommend opening closed MM periods.
    Steps are :
    1) Tcode MMPI --from Tool Bar select - System - User Profile - Own Data - In parameter Tab Enter "MMPI_READ_NOTE" in parameter Field.
    Try to remove assignment of plants from company code.
    Now Go to -
    T-Code OMSY & Set the required Period.
    Re-assign Plants to Company Code & Check whether correct preriod is open thru T-Code - MMRV
    Now use T-code - OMWD to Assign Valuation grouping code to Valuation area because the earlier data gets deleted when assignment of Plants was removed.
    Use the transaction code OMS2 then select FERT (or any other Material Type used by your company)
    Then click on the quantity and value update.
    Select your plant or valuation area and put Tick Marks in Value update and Quantity update
    Even check this link...Reopening the posting period that was closed
    This will definitely reslove your problem.
    Thanking you.

  • Posting Period Issue Production

    Hi All,
    Someone at the client Closed Sept and Oct 2008 in MMPV and now , postings cannot be made to Aug 2008.
    in MMRV, it shows current preiod ad Oct 2008 and prev period as Sept 2008.
    How can I fix this in such a way that users can post to August again?
    Appreciate any quck response.
    Thanks in advance

    Reopen The Closed Period
    It is possible to re-open a previously closed period. However, it is NOT advisable to do so because the valuation data of the previous period could be affected.
    In general, it is only safe to reopen a previously closed period when no material postings have been done after the period shifting to the new period.
    If there has already been postings after the period shifting to the new period, reverting the period back will cause database inconsistencies in the history tables.
    If you decide to proceed with this process, you can use the program RMMMINIT, but, please review the documentation of this program first!! and the check the SAP notes 487381 (for the error message that you are receiving) and the 369637 (for an explanation about the inconsistencies that will be generated.
    Steps are as below;
    Go to Transaction Code SE38
    Enter program name RMMMINIT
    Execute or press F8 function button
    Enter your company code (From and To)
    Enter relevant date: Say 01/03/2008 for Mar. 2008 month to be opened as of now
    That means, user can post for the month of Feb 2008 as well as Mar. 2008
    Refer SAP Note No. 487381 for more details.
    As per SAP Notes 487381 ( If the periods are opened in advance in mmpv to again change it to current period the following process should be follow ), Go to Tcode MMPI, then go to menu bar and select system -> user profile->owndata.In that screen , under the parameters tab enter MMPI_READ_NOTE in Parameter ID field and enter, then under short description you will get Initialise period. Next Save.
    Again go to MMPI enter company code, period and year and execute.
    XXXXXXXXXXXXXXXXXX
    Other way of doing it is follow these steps( But try this method in Sand box Only):
    1. Go to OX18, and delete the plants assigned to your CO.Cd and save.
    2. Go to OMSY and change the posting period to the one u want and save.
    3.Go to OX18 and assign the plants you have deleted in step 1.and save.

  • How to change the MM Period

    Hi Dear
    I wanna change the posting period from 02 - 2010 to 12 - 2009 means back date, Please help how it has to be done.
    i had tried in MMPV, MMRV, but no result. Give calender related error.
    Thanks in Advance
    Rakesh Paal

    Rakesh Paal,
    If you want to open previous period for reversal entry or additional entry
    The following are steps for Opening previous period in MM :
    1. Go to TCode SU01 (see OSS NOTES 487381)
    2. Choose "change" tab with your loging Name
    3. Choose "Parameter" tab
    give Parameters MMPI_READ_NOTE with date format as YYYYMMDD
    (say today 20071201)
    4. SAVE.
    5. Go to T-code MMPI
    6. open the old periods which you want to post into,
    Note :
    the period opening will be valid for only for the particular day only.
    7. Complete the posting you want to reverse or add
    8. Go to MMPV to close the periods.
    These steps first do it dev or quality then proceed furthere .

Maybe you are looking for