Change display name of the server under Equipment
is it possible to change the display name of the LIVE / PRODUCTION blade under equipment --> Chasis -->Servers to our own naming standards.
Attached is the screenshot of current names.
UCS Manager Version 2.1(3a)
Azmathulla,
It is not possible to change the name of the server, but you can add a label to it (see attached screenshot). And yes, it can be done during production hours, this doesn't affect the production data.
Please let me know if this answers your question.
Similar Messages
-
How to change display name of the attachment item attribute.
Hello Experts
I have a requirement to send a notification with attachment but attachment name should be attachment name,
Is there any way to change the display name of the Attachment
Please advise;
Thanks
Rajesh.Azmathulla,
It is not possible to change the name of the server, but you can add a label to it (see attached screenshot). And yes, it can be done during production hours, this doesn't affect the production data.
Please let me know if this answers your question. -
How to change the Group Display Name in the UME?
Hello experts,
from time to time due to reorganisation our departments group names change.
So far this was a big deal because it is not possible to change the Display Name of a group created in the Portal´s UME?
So far a new group with the department name has to be created and all group members have to be connected to the new group again. This is not a convenient way..
Is there a way to configure the UME to allow to modify the Display Names of Groups?
Thanks in advance.
Thomas
Edited by: Thomas Krynicki on Jan 19, 2009 5:15 PMThank you for the quick answer.
However my problem is still not solved.
I am using the portal groups also as permission objects for KM. That´s why I do not want to create a new group because the new one will not appear in the ACLs of the KM Objects.
For me it is important to modify the Display Name of an existing Group. The GroupID shall not change. The new Display Name should be updated then automatically in the ACLs of KM Objects in question.
By exporting the group data:
[group]
gid=TeamA
gdesc=All members of Team A
user=member1, member2
There is no parameter for changing the Display Name of the group. There is only the Description Parameter.
So far I didn´t find any solution.
Any other ideas.
Thanks in advance.
Thomas -
Change IP and Host name of the server
Hi,
Db :11.2.0.3
Os:Aix6
OS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?
Thanks & Regards,
VNOS team are going change IP address and host name of the server which has ASM and DB.
What are the things we need to follow for this?1. TNSNAMES.ORA files everywhere
2. LISTENER.ORA on server
If there are thin JDBC clients, change IP/hostname in their connection URLs. -
I install this messaging :
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:20:35, Feb 28 2007)
SunOS sunmail 5.10 Generic_125101-01 i86pc i386 i86pc
My problem is:
When user send email to internet user ( ex: yahoo.com or gmail.com etc. ) the messaging. must change the DISPLAY NAME with other DISPLAY.
ex: from: Giovanni <[email protected]>
on
from: External Mail <[email protected]>
I try with CONVERSION channel but it's change only body of mail.
### mappings
CONVERSION
IN-CHAN=tcp_*;OUT-CHAN=tcp_*;CONVERT Yes
### Conversion
! Append disclaimer to single part messages if the body part
! is text.
in-channel=tcp_*; out-channel=tcp_*;
in-type=text; in-subtype=*; part-number=1;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=0;
command="/opt/iplanet/sitescripts/change.sh footer.txt"
! Append disclaimer only to the first part of a multipart message
! if that part is a text message part. (part-number=1.1 is the
! first part of a multipart message).
in-channel=tcp_*; out-channel=tcp_*;
in-type=text; in-subtype=*; part-number=1.1;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=0;
command="/opt/iplanet/sitescripts/change.sh footer.txt"
### Script Change.sh
Change $MESSAGE_HEADERS
cat NEW_MESSAGE_HEADERS > $MESSAGE_HEADERS
But don't work.....
I try with reverse mapping but change only email address don't change display name
#### mappings
REVERSE
*|tcp_local|[email protected] $D$Y"NEW DISPLAY"[email protected]
I try with sieve filter but I don't know how change FROM.
### imta.cnf
tcp_local destinationfilter file:///opt/SUNWmsgsr/config/invia.filter
What is the correct way ? There are other way ?
It's possible change the Display Name ?
Thank's
GiovanniHi,
My problem is:
When user send email to internet user ( ex: yahoo.com
or gmail.com etc. ) the messaging. must change the
DISPLAY NAME with other DISPLAY.
ex: from: Giovanni <[email protected]>
on
: External Mail <[email protected]>
I try with CONVERSION channel but it's change only
body of mail. Correct, the conversion channel only deals with MIME body parts and not the email headers themselves.
I try with reverse mapping but change only email
address don't change display name
#### mappings
REVERSE
*|tcp_local|[email protected] $D$Y"NEW
DISPLAY"[email protected]
Haven't tried this myself but will take your word for it.
I try with sieve filter but I don't know how change
FROM.
### imta.cnf
tcp_local destinationfilter
file:///opt/SUNWmsgsr/config/invia.filterWith 6.3 you could use the deleteheader/addheader to remove the From: and replace it with something else - this ability doesn't exist in 6.2.
What is the correct way ? There are other way ?
It's possible change the Display Name ? Yes.
You can change the display name by using the PERSONAL_NAMES mapping table.
For example to change the following on outgoing email (via tcp_local):
From: Shane Hjorth <[email protected]>
to
From: What The <[email protected]>
1) Add the personalmap keyword to the tcp_local channel
2) Add the following mapping table to the mappings file:
PERSONAL_NAMES
*|[email protected] $YWhat$ The3) Rebuild config
./imsimta cnbuild; ./imsimta restart
This is all explained in the messaging server admin guide "Handling Personal Names in Address Header Lines".
Regards,
Shane. -
Change display name of workflow email address in sharepoint 2010
Hi
How I can change display name of workflow email address in sharepoint 2010. I want to configure display name (from address)of email
for each site collection separately.for example I want to change "software unit"
in below pic to another name for my software unit site collection.
How I can do this?
Thanx.Hi,
According to your post, my understanding is that you want to change display name of workflow email address in sharepoint 2010.
In my environment, if I assign a task to a user, the email is as below:
The “test” is the site name, the [email protected] is the “From” user.
Do you want to change the “From” field in the workflow?
If so, you can have a look at the "Send email extended" custom SPD workflow activity (http://www.codeplex.com/SPDActivities
) which allow you to specify the sender.
Here are some similar threads for your reference:
https://social.technet.microsoft.com/Forums/en-US/22d95510-95b7-4882-b988-4038e59fb031/how-to-change-the-display-name-for-sharepoint-emails-sent-using-workflows?forum=sharepointgeneralprevious
http://sharepoint.stackexchange.com/questions/19186/changing-from-email-address-in-sharepoint-designer-2010-workflows
http://sharepoint.stackexchange.com/questions/61964/how-to-change-the-from-address-in-feedback-workflow-email
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Not able to change display name in Forums
Hi SDN,
I am trying to change my display name in the forums posting by changing User Profile.
when i done it is showing in the Homw page ,but not in the Forums page.
Please check this out ,and let me know how can i do this.
Regards,
SReddyHi SReady,
Thanks for letting us know. I forwarded it to the developers. We will let you know once this is fixed.
Actually it takes a while until the change is replicated throughout the system. Can you check again to see whether your change made it to the forums?
I changed my display name to M Finnern, but so far it didn't make a difference.
Let us know, Mark.
Message was edited by: Mark Finnern -
Change domain name clients and server
Hello,
I want to change the domain name from eg ".vancouver.gov" to ".vancouver.local" on all of our devices in the network. Zcm has been installed with ".vancouver.gov" and the clients also are registered with ".vancouver.gov". When i change the domain name on the workstations and change the corresponding dns entries of the workstations to ".vancouver.gov" i cannot register workstations anymore and wol does not work anymore. Distributing applications to the workstation does work.
Anybody now how to accomplish this change.
We have about 400 workstations and 1 zcm 10.3.3 server.
Thanks.
RenI would recommend an SR.
Changing the DNS of Devices should not impact any of that, so long as
the clients can still properly resolve the servers and you are not
destroying the old DNS zone.
This may indicate that the CA/Server CERTs do not have the fullied
qualified DNS name of the server but perhaps just the short name.
Also, I would not recommend attempting to fix any certs right away, but
rather using the "Additional DNS Name" setting on your server, since
changing a Cert could cause lots for work on client PCs.
Later versions of ZCM make changing server certs a little easier but for
10.3.3, I would just use the server setting instead of a change.
But since I suspect you can create an SR as most government accounts
can, it may be simplest to go that route but keep my thoughts avoiding
any cert rebuilds in mind if there is any issue with the names in the
server cert.
On 6/4/2012 11:16 AM, rengelha wrote:
>
> Hello,
>
> I want to change the domain name from eg ".vancouver.gov" to
> ".vancouver.local" on all of our devices in the network. Zcm has been
> installed with ".vancouver.gov" and the clients also are registered with
> ".vancouver.gov". When i change the domain name on the workstations and
> change the corresponding dns entries of the workstations to
> ".vancouver.gov" i cannot register workstations anymore and wol does not
> work anymore. Distributing applications to the workstation does work.
>
> Anybody now how to accomplish this change.
>
> We have about 400 workstations and 1 zcm 10.3.3 server.
>
> Thanks.
>
> Ren�
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Can I Change My name in the Profile
Hi All,
Don't mine any one that I Asked this Q here
How To Change My Name in the SDN Profile ???
I Given My Pet name At the Time of Registration in SDN.
So I Want to Change My Display Name As Wel As The name in the Database
I Tried Like this
GotoMy Profile-Update Profile
Here I Changed First name Last name Display Name
I Logoff the User
Then Dispaly name Has been Changed But In My Postings my old name is Remains Same
I Want to See the Changes to Those Also
Please Let me Know
Regards
VamsiVamsi,
<b><i>Then Dispaly name Has been Changed But In My Postings my old name is Remains Same</i></b>
Where u are seeing ur old name in ur thread? Please make sure only the display will change not the contents which u wrote in ur questions/replies. Like Best regards Vamsi, this one u are referring to? If yes then it won't changes.
Best regards,
raj. -
Why can't we change display name?
Its very funny that we cant change display name and also we must have earlier feature which shows all the logged on members
Think about it
Thank youIn the past you had to wait a while for the caches to refresh anyway, now you need to wait an eternity or contact SAP.
The "display name" is no longer editable.
So if you are going to choose a pseudonym which is well known, make sure the guy is already dead and cannot get up to any more mischief or new scandals...
Cheers,
Julius -
EMS error - could not resolve the name of the server
Hi.
Log on to Exchange 2013 server (CAS)
Try to run EMS on this server and get this error:
...The WinRM client could not process the request because it could not resolve the name of the server.
Nslookup FQDN of this exchenge server -all ok.
What happend? Two weeks ago, all worked.
Thanks.Hi,
To narrow down the cause, I recommend the following troublwshooting:
1. Change another admin account to try to open the EMS on CAS server.
2. Try to empty your local DNS cache by ipconfig/flushdns
3. Try to Disable WinHTTP proxy by running : netsh winhttp reset proxy
4. Refer to the following article to resolve the WinRM error:
http://blogs.technet.com/b/exchange/archive/2010/12/07/resolving-winrm-errors-and-exchange-2010-management-tools-startup-failures.aspx
if you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
Dynamic display name of the sender
I have requirement like below:
After creating and executing any Agent/iBOt in OBIEE 11g, the Display Name of the Sender in the From address of email delivered to recipients is showing as "Administrator".
The user who is authenticated and authorized into the OBIEE also created an agent, he is asking that email should show his name in the From Address when it is delivered to the recipients.
I know why this is happening, I have provided the Display Name of Sender as "Administrator" while configuring the Agents at the Enterprise Manager Level.
What I am currently looking is, if there is any alternate solution to Dynamically display the name of the user who creates the Agent in the From address of the email when it is delivered to the recipients.
Thanks in advance
-BharathAny body there with the answers !!
-
Getting the name of the window under the mouse cursor
Hello All
Is there a way to receive a window name of the window under the mouse cursor? All windows in interest are LV windows, and all of them works separatelly. After the mouse click I would like to get the window name.
The reaso nfor asking is that I have a sequence of setting of different windows. I need to create a doccumentation and I need all windows front panels send to MS Word.
I thought that my application can read the window names and by using the LVwutil32 get the front pannels of the windows and send them to MS Word.
Problem is that in the library I do not have a function like "Window on Top.vi" or something like that.
Anyways, the problem for me now is how to get an active (most top) window
name?
thanks
PawelHi Pawel,
I found the following VI in my "trunk" that I made a while ago (written in LV6.0.2). It returns the active VI (and thereby) the Window name. Mayby you have some use of it, but I believe this is what you want. Only works for Windows though.
Regards,
Mattias Ericsson
Endevo, Sweden
Attachments:
WindowsUtil_GetActiveVIWindowName.vi 54 KB -
hello...my questions is related to objective C..
Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.ashish35,
No one from Apple here - we're just users like you. All I can tell you is that electronic fail and with MacBook Pros (and most notebooks) the components are so integrated as to make a repair to the logic board practically impossible, hence the high prices charged for repairs.
Only you can decide if you want to have your computer repaired or put the money towards the purchase of a new computer. If you do decide to purchase a new unit I would suggest that you also purchase the AppleCare Protection Plan which increases your warranty from one year to three years.
Sorry and good luck,
Clinton -
How to display name and display name of the role during request
Hi,
Is it possibe to display Role Name and Role Display Name on the "Select Roles" page during ROle Request for Others? In the "Roles Available" I can only see "Role Display Name". I was trying to look at "AssignRolesDataSet.xml" but was unable set what I need (for exmaple lookup-query...). How to achieve desired funcionality?
Best
mpHi,
I should implement your same funcionality, but looking for a solution I didn't find any useful suggestion.
Did you find the solution?
Thanks in advice
Daniele
Maybe you are looking for
-
Can't delete file from external hard drive
Hi, There is a permition problem with my external hard drive (no time mashine on it!) - can't delete certain files. I copied my documents on my external hard drive from previous computer with windows and later with linux system on it and there had be
-
My iphone 4 is stuck in recovery mode! help
it mostly comes up with error code 21. witch is internet security so iv unistalled all my security from the computer and still it comes up. the phone is stuck in recovery mode
-
Opening .exe files/Converting video format
Is there a way to open .exe files on my MacBookPro? (There is no virtually pc emulator for the MbookP, yet). Also, what I am trying to do is convert music video files that I downloaded to .mp4 file format so I can watch them on my iPod....Unfortunate
-
Adding item to array already created
hey, im having problems adding to array that is already created, here is the code. the buffer reader and the inputs are created. an arrray list has also been created with elements already in it. ihave created 7 processes but want to add one more to i
-
Maybe someone can help me out with this .... I have a DMP-4310g V5.3 connected via HDMI to an NEC E422 LCD which works fine with our telepresence equipment, the DMP can play video but there's no sound. I've tested with SWF, AVI, WMV .... I'm I missin