Change display order between second and third display

I have a MacBook Pro Retina 15" (2012) with 2 external displays (Dell 27 and Samsung 24). I use the Dell as main display. My problem is with FCPX. I want to use my Samsung 24 as Second Display to see my video material in it with the option "Show events in second display", but OSX set the macbook display as second and the samsung as third. So, I only can see the events in the macbook and the timeline in the Dell. (Unless I close the Macbook. losing one display. I'd rather keep the 3 to use one of them (macbook) with a Finder window).
Anyone can help me with this or is impossible to change teh order between the macbook display and the Samsung 24?
OS X Yosemite 10.10.3 / FCP X 10.1.4

Another way to put this: in my original instructions, do step 1 after steps 2 and 3:
(Start with FCP in single window mode, in whichever display, it does not matter)
2) 1) Open System Preferences->Displays, click on "Arrangement"
3) 2) Drag the visual representation of the Menu Bar to the display that you want to use as "second" display in FCP X.
1) Move FCP X's single window to the display you want to use as your main display.
4) In FCP X, choose to put the viewers events on second display.

Similar Messages

Can't switch between HDMI and VGA displays

I have a new H430, with hdmi and vga ports. My HP zr2240w monitor permits switching between AVG and HDMI displays, which I would like to do. But when I plug in both cables (HDMI and VGA) only VGA will work. If I switch to HDMI or make it the default display, the screen freezes at the desktop background: no mouse, no taskbar etc. Is is possible that the D430 video card will not support switching between displays (on a single monitor)
thanks,
saintmaur

Dear Monika and Mylenium: I figured out part of the problem, but not the solution: The shape I had drawn -and coudn't switch between fil and stroke on-is one I had already done a gradient mesh on, too. I had later abandoned the gradient mesh by using the option key to delete mesh lines, but that didn't take the shape all the way back to its original flat state. So it wasn't a plain drawn shape any more. So how do I release the gradient mesh to get back to a flat shape? I'm also having trouble keeping the shapes in RGB or CMYK mode-they keep defaulting back to greyscale. Could that also be a symptom of using gradient mesh? Note: I'm using gradient mesh for the very first time now; I've never used it before. It seems to leave a lot of unexpected baggage behind. I would send a screen shot, but if I start up Grab or Voila, all the AI pallets go away, and that's half the information. So how do I control gradient mesh?

Do I need a new Apple ID for my second and third apple computers ....

I just bought a second and third apple computer for my team mates for my business, do I need to have separate Apple ID in order for my emails NOT to drop on their computers ? I didn't think about this before I registered them with apple and now I need to undo this so my emails aren't on those two computers...how do we use the iCloud but also not have my email accounts on their computers.. I just want their email only on their computer

Typically you have an Apple ID for each individual. But if you do this, you can't share documents on the same iCloud account - it's not designed to be used this way.
If you sign in with the same iCloud account on each machine and use iCloud for email/calendar/contacts/messages then YES everyone will see each other's email and calendar, etc.
So you need to use separate iCloud accounts for each machine, and use something else (i.e. Dropbox or Box) to share files.

My iPhone 4S locked to Tmobile so I contacted to Tmobile and submitted unlocking form, but I got a replied said my IMEI number was not recognized. So I tried second and third time submitted the form and got same reply.

My iPhone 4S locked to Tmobile so I contacted to Tmobile and submitted unlocking form, but I got a replied said my IMEI number was not recognized. So I tried second and third time submitted the form and got same reply. I've been using same handset they issued to and never changed. But I have know idea why they said they don't recognised my IMEI number. Can anyone help me to solve this issue. Thanks

You need to call T-Mobile or visit a T-Mobile retail store.

I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

you can suggest it here - http://www.apple.com/feedback/iphone.html
And it is only a problem if you want a blank first screen. Personally, it would drive me nuts always having to swipe over one page to get to my apps - the only time I unlock my iPhone is to use it or run an app, so no, I have no need nor desire to have a first screen with no icons at all.
But, if they'd put it in as an option so people like yourself can also have what they want, that's fine too So send them your feedback (they actually do listen - iOS 5 includes a number of things people have been asking for on these forums, like being able to delete individual entries from the call history, inproved alerts/notifications, being able to opt out of all the location based data they collect,...).

Integration between SAP and third party tax software

can some body explain me or provide me docs regarding integration between sap and third party tax software like vertex.
Thanks

Hi
First configure the same via the following menu path:
1.) IMG>Financial accounting>Financial accounting global settings>Taxes on sales/purchases>Basic settings>External tax calculation>Define physical destination
2.) Then test connection (option is available there).
3.) If the connection is successful, also verify that the external tax package installed supports the R/3 4.6 version of the API. You do that by going to:
System Information>Function List
Check if the following functions are listed:
RFC_CALCULATE_TAXES_DOC
RFC_UPDATE_TAXES_DOC
RFC_FORCE_TAXES_DOC
RFC_DETERMINE_JURISDICTION
4.) Then test the tax data retrieval:
From SE37, select the relevant function modules like RFC_DETERMINE_JURISDICTION.
The above 4 steps are necessary to satisfy that the RFC connection is established
Hope useful
S Jayaram

Challange: Determine first second and third places given three DBLs.

This week I had the task of building a timing system for a Pinewood Derby track. This particular track has only three lanes, so I only need to worry about three results. I figured that I would simply write a VI that would take three numbers and output three strings ("First" "Second" and "Third") corrisponding to each lane on the track. I only had about an hour before the race to get this done.
I was stumped.
I just finished building an inelegant VI that simply sorts using a big case statement, but I hate it, and if I had to expand it to four lanes I might give up programming altogether.
So, I challange you, my dear LabView Gurus, to come up with either an elegant solution (that isn't all spegittie and select balls) to the simple three lanes, or a procedural system that could sort through an arbitrary number of lanes and assign an appropirate string to each.
Best of luck
--Spud
Solved!
Go to Solution.

killerspud wrote:
Excelent, you just had the two arrays you made backwards.
Are you sure about that?
LabVIEW Champion . Do more with less code and in less time .

Display alternates between dark and bright

I have several issues but I suspect somehow they are all related as they all began about the same time, within about an hour of each other, which was maybe a week ago.
Periodically, my display slowly cycles between dark and bright. Sometimes the display will suddenly go to sleep on it's own, usually after a period of about 20 seconds of me not doing something and when I wake it up the display is quite dim. Other times the computer goes to sleep (not just the display) requiring me to log back on. I use password for startup. I open the display settings after log-on and the brightness slider has somehow moved way over to the dark end (left). I slide it up to where I like it and soon it does it again all by itself again after a very short period of inactivity. I have noticed that if I leave the brightness control alone (dim) without readjusting it it seems to take longer for the other issues to develop. I would normally place the brightness slider just under half way up. My sleep time settings are currently: computer - 1 hr, display 15 min. That is plugged in which is pretty much the only way I ever seem to use it ... plugged in.
Another issue is an occaisional rapid beeping. It's the same low beep that you hear when you try to do something stupid and the computer is telling you you've made an error. The difference is this is a long, unending string of rapid beeps; I'd estimate maybe 15 - 20 beeps per second. The sound does not stop. I have to mute the speakers to shut it up. I have not yet been able to determine a recognizable pattern of common variables for when this happens. The other day when the computer went to sleep by itself and I woke it and tried to input my password and I saw that the input bar was filled with black balls as if it was remembering my password which I did not like but when I hit enter the logon dilaog box shook, the entry field emptied and refilled on it's own. I held the backspace key for several seconds and nothing seemed to happen. I used shift/command/arrow to highlight the entire string and deleted it but as soon as the characters were deleted I saw the input line quickly fill back up again one ball at a time at roughly the same rate as the beeps. Then it occured to me that the beeps were similar to those you would hear if you held a key down and filled an entire entry field with a hundred of a particular character and was still holding down the key long after the field was full. My first thought was that a key was stuck down. Not so. Each and every key is free to move and functions normally.
Last night I closed the lid to put the computer to put it sleep before I went to bed. About 3 hours later I was awakened by the sound of the rapid beeping. I got out of bed and went to the computer and opened the lid to find the same input line black balls issue but this time it was accompanied by the beeping and the display was also cycling between bright and dim. As it was the middle of the night I killed the machine by holding down the power button and forcing a shutdown. This evening I decided to do the upgrade from 10.9.1 to 10.9.2 hoping that might help but it did not. I have not heard the beeping since the upgrade but the display is still cycling, which was the first thing I noticed when all of this began.

Turns out it may have been sofware issue. I suspected software anyway because rebooting could temporarily cure it. I spoke to an Apple Service and Support person on the phone. She went through a fairly lengthy process with me to evaluate the machine and determine if it was hardware or software related. The results of those steps did not lead her to any concrete conclusions but she was able to hear the beeping issue happening in real time. She guided me through the steps of O/S recovery and now several hours later the machine appears to be functioning as it is supposed to. Typically the issue(s) would show up after maybe twenty minutes or a half hour after a hard boot. I am to monitor the thing for the next week or so watching for any signs of the issues slowly returning.
Here's keeping my fingers crossed.

Same colors display differently between Illustrator and Photoshop

Hi there,
I would love to know why the same colors display differently between my Photoshop and Illustrator apps (CS3). For example, a logo will display much darker or more vividly in Illustrator than in Photoshop, same file, same colour values. My color settings are synchronized from Adobe Bridge to North American Pre Press 2. I've opened the logo file in RGB color mode, in both apps. It would be so helpful if both apps displayed the colours consistently.
Any suggestions on how to do this would be wonderful!
Thanks!
Bobbie

Hello Bobbie,
I am using CS3 too and let me tell you that this Illustrator version is the worst ever. You best bet is to take the "Eye Drop" tool and select the Photoshop element to match the color.
CS4 also have problems when handle placed items. Sadly I can tell you that CS2 is more reliable than CS3 and CS4.
Not even if you use Pantone colors will match, Illustrator will change the colors making it impossible to match. "Adobe Quality"

IBooks display differences between iOS7 and iOS8

I work for a music publisher where we build reflowable ePubs that mostly contain music and embedded audio/video files. It is critical that we deliver an eBook that keeps a/v controllers with the title, credits, music etc. and maintains proper spacing throughout. It's critical not only for the overall look but for the readability and usability of the musician. Clearly a user can increase the font size and destroy any well designed layout for ePub, but if the ePub is designed properly, targeting median font settings, our layouts are consistent from tablet to tablet.
The recent release of iOS 8 has brought changes to iBooks once again and how it displays content. I've noticed differences with A/V controllers displaying more margin, troubles controlling the alignment and overall width of player. I've also noticed additional margin at the top of each "page" in iBooks which wasn't there in iOS 7.
These changes may seem minor but they completely break our layouts. I have been trying to correct these issues using CSS, but haven't had any luck. What's even more frustrating is that iBooks for Mac on Mavericks doesn't have these issues. In fact, the audio controller has a completely different look and responds to CSS as it should. These small issues are causing major problems for us because we have thousands of ePubs with audio at Apple.
We've seen changes in the past with our ePubs when iOS 6 went to 7, so we were expecting things like this to happen. But because our CSS modifications don't seem to work on the iOS side, I'm beginning to think that this is a bug or that there are new issues to contend with when developing ePubs for iBooks. If there have been changes, it would be great to have specs from Apple that would help identify what is happening within iBooks. It would also be great to have development tools for iBooks like there are for all modern browsers today.
If anyone knows anything about these issues or has information as to where I can find the answers, I would be most grateful.

This has been my headache since day one and a complete swing and a miss by Apple. I haven't been able to get ANYTHING I have not explicitely purchased from iTunes to sync in iBooks across device.
For example: If I load an ePub or PDF into iTunes and "manually" add to a device, this works just fine.
However, if I open a PDF file on my iPhone into iBooks, it doesn't show up in any of my other devices, including the new iBooks on my iMac with Maverick. it doesn't matter which device it's added, nothing syncs if it's not purchased from iTunes.
Please, someone make me a liar and tell me I've completely missed something.
Apple: Why or why can't I add PDF files to iBooks on my iMac and have them automagically show up in the collection I created on all my devices? Because I didn't purchase them from you, you say? Stupid, stupid, stupid.
Then don't let me add it in the first place and stop advertising "my content anywhere on any device" because this has been broken from day one.

Web sites display for a second and dissappear

On both iphone 4 and 5 I open web sites, they display for a second or two and then disappear. Weather Channel.com is an example, the pages loads for a second and is gone. The title is still at the top, but the page is white...I have tried everything. Any help would be greatly appreciated!

For issues with Apple devices contact the Apple support team http://www.apple.com/support/contact/

Any defference display icon between ecc and ecc6

Hi,
any defference between ecc and ecc6 to display ICON
my problem is i was run the one program in ecc then output shows with icons.
same program run in ecc6 output is same but ther is no icons like ecc
Regards
naresh

Hi
Good
Yes you could find some new icons in between ECC and ECC 6.0 but I dont think there is lots of difference between these two, though you have not mentioned the program name it is hard to give you the correct reply on that, but yes in some standard program cases you may find this kind of problems.
Thanks
mrutyun^

Thinkpad Twist s230U no internal display, works on HDMI and mini display port

Hi,
My Thinkpad Twist does not display anything when turned on except on external monitors. The Device manager shows a greyed out internal display icon, says it is not connected.
1. Could this be the power connect ribbon cable p/n DC002C003W00 have a fractured wire(s)? I have tested for open circuit between PWR1 and PWR2 connectors and there are 4 sequential pins which are open circuit. Is this normal?
2. The touch screen works
3. There appears to be absolutely no LED backlighting working
4. Is there a possible fix for this and if so is it the power cables or some physical problem with the ribbon cables OR is it definitely a new display that is needed using existing cables?
Thanks in advance
Andrew

The last 4 pins on the connector are unused I have determined so it is not the power ribbon cable connector.
I found two wires fractured in the LCD ribbon cable right at the point where it feeds through the twist mount. I expect this could be a common problem after use. After repairing these two wires it did not fix the screen problem. I have ordered a replacement LDVS ribbon cable and will report back once I have replaced that.

Is possible to change the order of name and last n...

After to have installed: "Nokia PC Suite 6.84.10.3 ita", I have noticed that the names in the Contacts folder, come lists to you with the following order: "name for first and last name for second". I have tried to change this order, opening Nokia Contacts Editor, selecting Options > Order names > Last name for first, rebboting Nokia Phone Browser and Nokia Contacts Editor in order to render effective the modifications, but nothing
to make. Why in the previous versions of PC Suite, it was possible to change this order (Name for first or Last name for first), and instead in the version "Nokia PC Suite 6.84.10.3" it is not possible? Someone of You have the same problem? How I could resolve it? Thanks in
advance!!

vCard file is in plain text. you can edit it using text editor - find field like:
N:han;abrash
the first name and last name is seperated by ';' there. and you can reorder it to:
N:abrash:han
done
What's the law of the jungle?

Differences in sort order between iTunes and iPod

Can someone explain how the sort order of artists / albums works? It seems that it is different between iTunes and the iPod. In iTunes (7.3.1) I can enter data in the fields for Artist, Album Artist, Sort Artist and Sort Album Artist. When I get the tracks to appear in the order I want in iTunes, it doesn’t seem to transfer across to my iPod. I know there are some differences in how the sort order works in both, but how is it different?
John.
Dell 5150 Windows XP

ou must have an older iPod.
I believe the new sort order only works on the new iPods (Nano and Video)

Change display order between second and third display

Similar Messages

Maybe you are looking for