Change Display Privat to Work?

How can I change a existing Adress from Privat (Name/Prename) to Work (Firm) or vis versa via iCloud, iPad or iPhone?
On the Mac it is easy via the Adress Application but with the others I don't know.

It's not there. In Mountain Lion, the Displays options have changed somewhat:
It only shows the external display option when a display is detected.
Clinton

Similar Messages

External display won't work on Window

Hi can anyone please help me in this? when I using window XP, my external display won't display out but when I'm using MAC OS X it work well, why? please help... Thanks

I can only help if you are using an NVidia graphics card, as with that you can use the NVidia Control Panel to setup the external display.
Connect the display
Start NVidia Control panel
Select the Display icon
Then select Change Display Configuration
There you can set the resolution, extend the screen or create a copy et.c.
Hope that helps...

My thunderbolt display is not working with my MBP retina 13''

Hi,
     I just received both a new macbook pro retina 13'' and a thunderbolt display. Everything was working properly yesterday but today, I have no clue why, the thunderbolt display is not working anymore.
     . the power supplier for my laptop given by the thunderbolt display is still working;
     . when I don't connect my laptop through the thunderbolt connection, I can use the usb sockets as power supplier , for my phone, for instance;
     . as soon as I plug the thunderbolt cable, the usb socket is not feeding any more my phone, whereas the screen is not displaying anything.
     . If I take a look in the system report, in the thunderbolt tab, there is "no device connected"...
I restarted plenty of time my laptop, took care to reinitialise the SMC as well as the PRAM, and nothing changed. I also disconnected the thunderbolt display, waited few minutes (and more), but nothing changed, again the black screen.
Has somebody an idea?
Thanks

which model air do you have?
try both a pram and smc reset
plug the monitor into a different electrical outlet and a different port on your Mac (if you have multiple tb ports)

Dim Display feature not working properly

When I first got my 8330 a few days ago, the display dimming feature worked just fine. Now, with Backlight Brightness set to 100 and Backlight Timeout set to 30 seconds, when I toggle "Automatically Dim Backlight" to ON, the display dims as soon as I save the configuration. It stays dimmed continuously from that point on. To get back to normal I have to toggle the "Automatically Dim Backlight" to OFF, but then it just stays on full brightness for the 30 seconds.
Larry

Cool, thanks for the tip. I never thought of that. Ithink that should work, I'll let you know if theres anyproblems. Along a similar line of thought why is it that when I insert aUDA using a load rule, and the option for 'Allow UDA Changes' ischecked in dDimension Build Settings, why does it not overwrite theprevious UDA, instead it creates duplicates, or three or fourcopies of the UDA I'm trying to load. However if I uncheck"Allow UDA Changes" and have "Allow PropertyChanges" it will overwrite the UDA? Is that a known bugin the system?

My 13'' macbook pro retina's display just stopped working for some reasons i don't know, what can be the cause?

Hello
i'm really worried about my macbook pro, it's a 13'' retina 2012 model. After watching a late night movie last night i just closed the lid and went straight to bed as usual. To my surprise when i flipped open the lid this morning it only made the apple sound when turned on but didn't display anything. I tried switching it on and off several times but nothing changed. So i connected it to an external display and it worked fine. The funny thing is i never dropped it or spilled any liquid on it. Now i'm wondering what could be the cause and i'm hopping someone might be abble to explain this....Could it be the lcd screen, the video card or graphic processor or could it be the logic board?? Help.

reseting the System Management Controller won't wipe my SSD drive will it?
No, but if you don't already have a backup, you must back up immediately, before you reset the SMC or do anything else.

Urgent : code for the change/display button in the ALV Grid control

Hi gurus,
Here i have the following situation,
I must place a button which should work as both change/display,
first click should be change and the next click should be display,
when i click for the first time the row/rows selected should be locked and when again click on the same button that should be unlocked.
If you have the solution please come back with the solution.
Bharath Kumar

Hi,
try this
*& Form SET_PF_STATUS
 text
 -->EXTAB text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
DATA GIT_FCODE TYPE TABLE OF SY-UCOMM.
IF GIT_ITEMS IS INITIAL. ( you have to maintain a counter )
( like data: g_count type i.
and if it is divisible by 2 then display
other wise change.
 CLEAR GIT_FCODE.
 APPEND 'CHANGE' TO GIT_FCODE.
 SET PF-STATUS 'ZPF_STATUS' EXCLUDING GIT_FCODE.
ELSE.
 CLEAR GIT_FCODE.
 APPEND 'DISP' TO GIT_FCODE.
 SET PF-STATUS 'ZPF_STATUS' EXCLUDING GIT_FCODE.
ENDIF.
thanks & regards,
Venkatesh

How to change colors for record working time calendar

Hi,
I would like to change the colors in the calendar displayed in record working time based on some conditions.
How do i do that is there any BADI associated with that
Thanks
Bala Duvvuri

Hi Bala ,
Yes its possible to change that .
You need to implement BADI for this ..
BADI name : "PT_ABS_REQ"
In the BADI "PT_ABS_REQ" interface "IF_EX_PT_ABS_REQ" you can find the method
"SET_CALENDAR_COLOR" in that you can set the colure for the Absent type ......
Adjust Colors of Calendar and Team Calendar
Functionality
You can use this method to change the colors in the team calendar.
In the standard system, the different statuses for requests have different colors. You can use this method to differentiate the colors of requests depending on the following aspects:
Status of requests (status)
Action that an employee has executed: new request, delete, change (UIA operation)
Subtype of absence (SUBTY)
Full-day or partial-day absence (BEGMT, where BEGMT = 0 signifies a full-day absence)
Application mode ( mode). You specify the application mode in the Select Employees for the Team Calendar IMG activity.
Color Display of Status of Leave Requests(COLORS_ACTIVE). You specify this status in the Specify How Leave Is Displayed and Default Values IMG activity.
Available Colors
You have a choice of 16 colors. The 16 colors are hard coded, that is, you cannot change them or add other ones.
The available colors are stored with their RGB value as constants of the CL_PT_REQ_CONST class. Use these constants if you want to change the colors.
Notes
If you change the colors in the team calendar, you should also adapt the legend accordingly. You can use the Adjust Legend for Calendar and Team Calendar method to do so.
Hope this work!!!

Display doesn't work after latest security update

I have three Apple displays with my MacPro, and after installing the latest security update, one of them just stopped working.
The status light is still on, and my usb devices connected still function, but I have a black screen and nothing is recognized in the displays system preferences.
Anyone else experience this? Did my display just die?

Ut-oh!
FWIW:
My 7-year-old 22” Cinema Display, on a 10.4.11 machine, with nearly constant use, now becomes so dim during the screen saver mode that regardless of which saver I use, it becomes no longer visible.
As soon as the screen saver is activated, I have full brightness (though not as bright as when the display was new), then it gradually fades until the screen is all black.
Upon awaking, the screen is very dim, and then, over a 90 second period, it slowly returns to normal brightness.
1. The brightness control is set to max.
2. I have toggled the brightness control and changed screen savers, both to no avail.
3. Recalibrating the display did not work.
This seems to have occurred on the same day I installed the latest Apple Security Updater.
Very weird...

Display doesn't work after power outage

The electricity was knocked out in my neighborhood for a few hours and when it was finally restored I found that my display no longer works. It is getting no power at all. None of the lights on the front of the display are working--it's totally dead.
No settings or connections were changed during the time when there was no electricity. So it's obviously a result of the power outage, right? I had it plugged into a surge protector (which I thought was supposed to be a safeguard against exactly this type of occurence) so I'm wondering if that has somehow saved me--only there's some secret Mac trick that needs to be done to get my display back to life.
Can anyone please help me? This economy is strangling me to death--I simply cannot afford to buy a new display at this point.

I just realized that I never actually asked my question (duu-uuuh):
Can anyone tell me if there is a way to figure out (without having to spend any money) if my problem is only with the power supply or if the entire display is just garbage at this point?
Or perhaps someone has experienced this situation, was able to resolve it and knows what I should do to make my display functional again?

Change DISPLAY NAME

I install this messaging :
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:20:35, Feb 28 2007)
SunOS sunmail 5.10 Generic_125101-01 i86pc i386 i86pc
My problem is:
When user send email to internet user ( ex: yahoo.com or gmail.com etc. ) the messaging. must change the DISPLAY NAME with other DISPLAY.
ex: from: Giovanni <[email protected]>
on
from: External Mail <[email protected]>
I try with CONVERSION channel but it's change only body of mail.
### mappings
CONVERSION
IN-CHAN=tcp_*;OUT-CHAN=tcp_*;CONVERT Yes
### Conversion
! Append disclaimer to single part messages if the body part
! is text.
in-channel=tcp_*; out-channel=tcp_*;
in-type=text; in-subtype=*; part-number=1;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=0;
command="/opt/iplanet/sitescripts/change.sh footer.txt"
! Append disclaimer only to the first part of a multipart message
! if that part is a text message part. (part-number=1.1 is the
! first part of a multipart message).
in-channel=tcp_*; out-channel=tcp_*;
in-type=text; in-subtype=*; part-number=1.1;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=0;
command="/opt/iplanet/sitescripts/change.sh footer.txt"
### Script Change.sh
Change $MESSAGE_HEADERS
cat NEW_MESSAGE_HEADERS > $MESSAGE_HEADERS
But don't work.....
I try with reverse mapping but change only email address don't change display name
#### mappings
REVERSE
*|tcp_local|[email protected] $D$Y"NEW DISPLAY"[email protected]
I try with sieve filter but I don't know how change FROM.
### imta.cnf
tcp_local destinationfilter file:///opt/SUNWmsgsr/config/invia.filter
What is the correct way ? There are other way ?
It's possible change the Display Name ?
Thank's
Giovanni

Hi,
My problem is:
When user send email to internet user ( ex: yahoo.com
or gmail.com etc. ) the messaging. must change the
DISPLAY NAME with other DISPLAY.
ex: from: Giovanni <[email protected]>
on
: External Mail <[email protected]>
I try with CONVERSION channel but it's change only
body of mail. Correct, the conversion channel only deals with MIME body parts and not the email headers themselves.
I try with reverse mapping but change only email
address don't change display name
#### mappings
REVERSE
*|tcp_local|[email protected] $D$Y"NEW
DISPLAY"[email protected]
Haven't tried this myself but will take your word for it.
I try with sieve filter but I don't know how change
FROM.
### imta.cnf
tcp_local destinationfilter
file:///opt/SUNWmsgsr/config/invia.filterWith 6.3 you could use the deleteheader/addheader to remove the From: and replace it with something else - this ability doesn't exist in 6.2.
What is the correct way ? There are other way ?
It's possible change the Display Name ? Yes.
You can change the display name by using the PERSONAL_NAMES mapping table.
For example to change the following on outgoing email (via tcp_local):
From: Shane Hjorth <[email protected]>
to
From: What The <[email protected]>
1) Add the personalmap keyword to the tcp_local channel
2) Add the following mapping table to the mappings file:
PERSONAL_NAMES
*|[email protected] $YWhat$ The3) Rebuild config
./imsimta cnbuild; ./imsimta restart
This is all explained in the messaging server admin guide "Handling Personal Names in Address Header Lines".
Regards,
Shane.

Problem with adapter network category reverting to public after change to private

I noticed that after setting up HyperV Server 2012 R2, that after applying needed firewall rules to allow remote management, that these were added into the "Public" profile. So, I disabled them and enabled for Private and proceeded to change the
NIC which is internal to the LAN to Private as well.
All was good; however, after several hours... the network category reverted to Public on that NIC, which of course will not allow any remote management.
The firewall rules for remote management are only enabled for "Private".
I used: Set-NetConnectionProfile -InterfaceIndex # -NetworkCategory Private
Which works; however, what is causing it to revert to public after a given amount of time...

no domain for this HyperV Server 2012 R2, it's workgroup.
The management NIC is set for static IP. At first I did not apply a gateway nor dns settings for it and NLA automatically gave it the Public profile. After setting to Private via powershell, any reboot or after several hours, it would
revert.
So, I set a gateway and dns to a VM that is running on that server which runs those services for other subnets. I am guessing that after a reboot, NLA discovery is not respecting the static properties and changing the profile to public. Perhaps
due to the VM is still spinning up?
I cannot find a way to get NLA to respect the static properties "and" profile for itself.

Permanent Crash related to changing display settings while FCP is open.

Recently, the display settings (arrangement) on my two monitors started changing by itself while I was working in FCP 6.5. I'm using ancient monitors (Viewsonic MB90 and Mitsubishi Diamond Pro 920. I just don't have the money to upgrade right now). Tis was annoying but I dealt with the problem by creating two different windows layouts. Then things got worse (the only thing I had done was install 8 gigs of additional memory on top of the original 2). FCP started crashing and now I can't even open the application. It doesn't react.
Apple recently posted a not very informative acknowledgement of the problem with changing display settings while FCP is open, but it doesn't suggest solutions to my problem. It would be helpful to know a) what resolution and refresh rates are best for these old monitors and b)how to open FCP again. Your help is greatly appreciated.
FCP 6.5
2x3g quad core xeon
Thanks,
Alex

THIS IS IT!
Disabling the nVidia deep colors for 3d applications solved the uber-annoying "flicker-screen-settings-and-disrupt/crash-other-programs" issue. I specifically only disabled deep colors for Premiere, not for all 3d applications I use, because none of them have caused the same problem as Premiere.
This display-screen setting issue probably occurred because I use a Dell u3011 monitor which displays Adobe RGB color gamut, not just sRGB.
However, now this brings up another question with disabling deep colors (effectively disabling the Adobe RGB use of the Dell monitor):
QUESTION: If I have CG-rendered frames that seem to be created in sRGB and Adobe RGB (in two different programs), what color space should I be mixing/editing them in?
I'm somewhat of a novice with the color spectrum/gamut issue. From what I understand, if I edit both CG images in sRGB, I'll be losing color data from the Adobe RGB-created CG image. If I edit both CG images in Adobe RGB, will I create minor banding effects on the sRGB image because it doesn't have the color range that I'm editing in? Perhaps my question is more relevant to AfterEffects compositing of the images rather than simply/only editing them in Premiere.
The end result is something like an architectural film/ flythrough.
Thanks,
-Matt

Version Management for PO(Set up Change Displays)

Hi All,
We have Version Mgt. functionality for POs.
Pls tell me what is the use of 'Category' field in 'Set up Change Displays' in Version Management.
The path is IMG>MM>Purchasing>Version Mgt.>Set up Change Displays
Appreciate if you do not provide the explanation which comes by pressing F1. Jst let know how we use this field in this functionality and how.
Thanks in advance.
Regards

Dear ,
The sole purpose of the field Category i.e Data output category is reporting ,Which means when you check the report of Display Changes for a version in PO it will show you all the fields (as per SAP all fields are of same importance ) but if you want to impose importance to those fields according to your need then you assign a category and later you can sort the list based on this category
Now how it works lets take an example
Suppose you create a PO take print out and then changed few data in PO so new version triggers -> Mark this version as completed and saved the PO
Now after that your boss or any one want to see what changes you have made for that PO so he select version 1 in header and click on Display changes
Field........................................old value.......New value.......Changed by......Changed On....Category
1> Price ................................100 EUR.......120 EUR...........user1234..........18.02.12................A
2> Quantity .............................60 EA.............65 EA...........user1234..........18.02.12................A
3> Material short text ............Iron ore-1....Iron ore-2..........user1234..........18.02.12................B
4> Requisitioner ....................User4.......... User 5.............user1234..........18.02.12................B
5> Req. tracking no...............need543.......need579...........user1234..........18.02.12................C
6>   Taxcode ...........................V1..................V2...............user1234..........18.02.12................C
{If in the standard output format category field is missing you can bring that by changing the layout }
Now out of these 6 field you assigned Price and Quantity as category A (say most important)
Material short text and Requisitioner as category B (Medium importance)
Req. tracking no. and   Tax code as category C      ( Less importance)
So it just an additional information for you to categorized and easily identify important fields among many other changed fields.
Now I sincerely hope it clarifies you doubt
Edited by: redriver on Feb 18, 2012 7:46 AM

Problem changing displayed component smoothly

I have the following problem that I cannot resolve.
Background : I have two display components which my app must alternate between showing. One is a JScrollPane holding a JTextPane, the other a canvas. The canvas in turn holds an animation. In my first attempt I construct a JPanel which (when it is time to change display) just remove the scrollpane and add the canvas, starting the animation thread and then call revalidate(). It works, but this solution is not smooth enough, it took more than one second before the the animation is displayed properly. To solve this I was thinking of putting the two components into a JTabbedPane component, and then just let the app change the tab index. However, I dont want the tabs available in the JTabbedPane, since changing the display is controlled by the app, not by user interaction. In fact, I dont want the tabs visible at all.
So, how do I solve this? Is using a JTabbedPane, but somehow disabling the tabs possible, or does anyone know a better solution?
Thanks !

Hi,
You're problem might be due to your use of the Canvas (which in Swing is called a heavyweight (=bad) component).
JPanel is lightweight and you're trying to add a heavyweight component to a lightweight one - which is Bad, bad, bad. Simply make your component extend not Canvas but either java.awt.Component or java.awt.Container.

Change the Layout for Create Change Display and   Alv List

Hi All,
I am working on Custom Development WD Application for Maintain   Employee.
I need to Get help/advice to hadle the two Problems.
1) In my application I have to provide Create,Change & display Employee.
Customer needs seperate Link/Application for all Create , Change and Display in Portal.
I thought I am planning to Create Three Application in the WD Component(Create,Change & Display) while Pressing the Application I have to find out what is the Application They Pressed in the Componenet Controller to Change the Layout/Field (Edit/Display/Visisble) according to Create/Change/Display Employee.
For this How to Find the Application name of the WD Componenet.
2) To show the Employee List I am having using ALV LIst.
But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
I thought I am planning to provide Visible/Invisble columns after providing one button.
If they pressed this button It will next set of Columns with out scrollibng.
How to handle this ?
Kindly help/advise me for both the Problems to proceed further.
Thanks in advance.
Dav

1.For this How to Find the Application name of the WD Componenet.
DATA:
l_api                           type ref to if_wd_component,
l_application_api               type ref to if_wd_application,
l_application_info              type ref to if_wd_rr_application,
lv_name                            type string.
l_api              = wd_this->wd_get_api( ).
l_application_api = l_api->get_application( ).
l_application_info = l_application_api->get_application_info( ).
lv_name = l_application_info->get_name( ).
> 2) To show the Employee List I am having using ALV LIst.
>
> But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
Are they planning to buy Wide Screen monitor ??
I am not really fan of the solution you propose, at the same time i am not having better idea. I would get the customer on table and see how they would like to have the presentation of 35 columns without scrolling.
ALV provides customization, in that way users can select their own list of columns.

Change Display Privat to Work?

Similar Messages

Maybe you are looking for