Change documents in POP2

Hi everybody,
how can i active the change documents for TA POP2?
Thanks in advance

Hi,
Go to POP2 Enter Packaging instruction then go document tab & bottom right side there is create document button click that & enter document no which was created using CV11 System proposes new version copied select yes
And you can see the new document by doubble clicking
Rg

Similar Messages

IDOC triggerring when create/change in POP1/POP2/MM01 programatically

Hello experts,
Can u please help me with the below requirement how i should proceed.
u2022Trigger a packing instruction IDoc from ECC to MII whenever the packing instructions are created/changed in ECC via t-code POP1/POP2.
u2022Trigger a packing instructions IDoc from ECC to MII whenever a new or existing material with packing instructions are extended to an MII enabled plant in ECC via t-code MM01.
regards,
NTGS.
Moderator message: please do more research before asking, show what you have done when posting.
Edited by: Thomas Zloch on Feb 20, 2012

Hi,
For Triggering an IDOC on creation of new material you have to add the "KEY" field entry for the respective table in your BD52 transaction(Change Document Items for Message Type).
There are 3 types of changes: Insert, Update and Delete.
Insert : With the insert change type precisely one record is written (table name, table key, field name = "KEY", change type = insert, old value = empty, new value = empty). The field values are not documented as they can be found in the database. With this change type it is important that the special field name KEY is used.
Pls refer to the following link for more details: http://help.sap.com/saphelp_470/helpdata/en/78/2178da51ce11d189570000e829fbbd/frameset.htm
Note: I have provided the solution because this thread is marked as "Answered" but no answer is provided for the question. So I thought of updating the answer as it would be helpful for someone facing similar issue.
Regards,
Sridhar
Edited by: Sridhar Upadhyayula on Jul 27, 2009 11:02 AM

Issue in generation of Change Document - ChaRM

Dear All,
We are implementing ChaRM, I have copied the standard transaction type to z.
I am able to create request for change with transaction type zmcr but when the normal change or urgent change document are created they have standard transaction type.
I have made the changes in SPRO (Defining copy control of transaction type) but still document are getting generated with standard transaction type.
Please attached document of copying control.
Thanks in advance
Regards
Sushant

I have removed zmcr - smmj but now the change document is not getting generated. Please see the screen shot attached.
Regards
Sushant

How to use change document object ?

Friends,
I am learning to use the Change Document object for one of my Z table. I have created a change doc object using SCDO. I have now written a test report in which i am issuing the SELECT statement for fetching old and new values from the Z table and passing them to the FM generated by SCDO.
I am not able to see the changes in the CDHDR and CDPOS tables. I am doubtful abt the values being passed to the FM. Here are the values i am passing:
CALL FUNCTION 'YTEST_WRITE_DOCUMENT'
EXPORTING
    objectid                      = 'YTEST'
    tcode                         = 'se38'
    utime                         = sy-uzeit
    udate                         = sy-datum
    username                      = sy-uname
PLANNED_CHANGE_NUMBER         = ' '
   OBJECT_CHANGE_INDICATOR        = 'U'
PLANNED_OR_REAL_CHANGES       = ' '
NO_CHANGE_POINTERS            = ' '
   UPD_ICDTXT_YTEST               = 'U'
    n_ztest_cle                   = wa_ztest_cle
    o_o_ztest_cle                 = o_ztest_cle
UPD_ZTEST_CLE                 = ' '
tables
    icdtxt_ytest                  = itab_cdtxt.
Is the object ID the same as the Change Document Object name ??
Please help.
Thanks,
Ram.

Well, i found a way out for the problem i was facing. I was not setting the "UPD_ZTEST_CLE " FM parameter. When i set it to 'U', the changes got reflected in the CDHDR and CDPOS tables.
Can i reward myself as i solved this by myself ???

Problem with Change Document FM - Not all fields are tracked in CDPOS

Hello everybody,
Using transaction SCDO and following necessary steps described in forum, I have created a change document ZFBR to track changes of a table ZFBR. The problem is, the generated FM ZFBR_WRITE_DOCUMENT does not track changes of some fields of the table (inserts are always ok, problem is with updates). After some debugging I realized that the FM DDIF_NAMETAB_GET was returning the table DFIES_TAB where the LOGFLAG was empty for some fields (which are not tracked) so that changes of these fields were not visible in table CDPOS. However, fields with LOGFLAG = 'X' are tracked succesfully (changes are visible in table CDPOS).
I did not specify any fields to be get logged or not during the steps in SCDO (can we do such a specification anywhere?), does anyone know why the field LOGFLAG has the value '' (space)?
Best regards;
Ozcan.

Hi again,
The problem has been solved.
The data elements used in a table are the reason for the problem I have described above. When displaying the details of a data element, under tab "Further Characteristics" , the "Change Document" checkbox has to be selected to enable change document tracking. I have copied the problematic data elements with Z prefix and made the necessary enabling. I have replaced the data elements with their Z equivalents.
Best regards.
Ozcan.

Table to look for change documents for users

Hi friends,
Is there any standard table to look for change documents for a user?change document through SUIM does not give the correct log.
Thanks for you support.

Julius
Looking at another of Tracy's other post (http://scn.sap.com/thread/3598947) she's trying to use ACL. Hence needing to know the tables to write joins/queries to hit tables within ACL
I've seen ACL used and have had the fun experience of Auditors using Google to find tables to perform checks on without context of what has actually been implemented in their particular system.
Regards
Colleen

F150 dunning- create change documents in FI journal

hi all,
when running F150 in update mode the dunning information is updated in the FI posting.
however, no change documents are created for the FI posting.
Is this possible to achieve and how?
If I change dunning fields manually via FB02 I get the change document for those fields. I would like to get this also for the F150 program execution.
Thanks in advance
Hein

Hi,
maybe SAPNET note 609773 is helpful (depending on your SAP Release).
best regards, Christian

Change Pointers - adding a new field to existing Change Document

Hi,
We have a requirement to capture the changes made to the Material object through the transaction C223. The changes to field MKAL-PRFG_F have to be captured.
There is an exisitng Change Document Object - MATERIAL. This is included in Message Type MATMAS. These are the steps we have done:
1. In SCDO - added the Z structure to the Change Document Object - Material. [Z structure contains the field MKAL-PRFG_F. Change pointer option is checked for this Data element.
2. Created a Z Message Type with reference as MATMAS.
3. In BD52 - we have listed the fields for the new Z Message Type created.
4. The Change Pointers - reactivated after the steps are done.
The changes to the field MKAL-PRFG_F through C223 Tcode are not recorded in BDCPV table.
Have we missed any steps here?
Thanks,
Pallavi

HI,
I don't think a new zmessage type is required in this case.. is the structure added to MARA table??The change document programs are there which triggers the iodcs... In SCDO transaction code , click on generation info for MATERIAL.. You will find the includes. The FM MATERIAL_WRITE_DOCUMENT creates entries in CDHDR and CDPOS, if we maintain entries in BD52 , the entries wil be written in BDCP and BDCPS tables.
Try to add your structure in MARA table as append strucre and then you can debug the IDOC from WE19 and use the FM "MASTERIDOC_CREATE_SMD_MATMAS" and then you also need to switch on Update Debugging on, to debug the changes in update FM MATERIAL_WRITE_DOCUMENT.
Please see if the change is reflected or not....
ELSE.
may be you need to create a new entry in SCDO and do all the ALE configurations for change pointers.
Please find the link for change pointers and also you can get lot of information on change pointers in SCN.
http://help.sap.com/saphelp_nw70/helpdata/EN/12/83e03c19758e71e10000000a114084/content.htm
Regards,
Nagaraj

Decimal places for JPY currency in change documents

Hi Gurus,
For opportunities in SAP GUI the change documents for JPY show incorrect numbers.
The number is divided by 100 (two decimal places added).
Checked the CDPOS table and found the values already divided (two decimal places added).
SPRO->General Settings->Currencies->Set decimal places for currencies is set for 0 decimals for JPY.
Is there any way I can get correct values in the change documents?
Please advice. Any hint is useful.
Thx,
Martin Kuma

Hi Naren,
Thank you for the tip, however the TCURX table is changed via customizing and should be changed only during the system initialization.
What I would like to do, is to assure that the system displays the values in change documents correctly. It should apply the currency conversion for the data displayed the same way it does for all the tables.
Do you have any idea, how should I do this?
Regards,
Martin Kuma

Error releasing transport request for change document object

Hi Gurus,
I created a new change document object for a Z-table. When i try to release the transport request in the development system it terminated with a message "Export application-defined objects 17.12.2009 11:07:45 Not yet executed". The transport request continued to be in the "Release started" status and i am not able to release it.
I checked in the co file & data file directory for this request, The co file is available but the data file is not created.
Could you please let me know how to solve this?
Regards,
Immanuel.

It was a problem with some basis settings. Was rectified by the basis team.

Error while approving change document(TR lost project code)

Hi All,
I am having issue in change document approval, when we are approving change document for unit testing or if release management approving change for pre-production or production approval, we are getting error, I started coming from last two days only,\
when I did detail analysis, in all transports project code related to change document, disappear
although if I create new change document, project code appear,
Do we have way to solve this issue?, I even not able to decouple the transport from change document, it giving error, do we have way where we can resync change document and transport?
Dinesh

Hi All,
Do anyone have some solution for this issue?, it is bigger than I thought, I can check it impacted all systems, and all transports, all transports seems to issue they lost project code in it we rollover maintenance cycle last week and this problem started from their, we put charm master note and few other charm fixes(notes) last week,
this problem not coming any new change document, but all change document created before rollover impacted
Dinesh

Problem while generating Update progam for a Change Document Object

Hi,
I'm trying to deal with Change Document concept in a R/3 4.6C environment and to establish new Change Document object for my (Z)-table. I haven't using any namespace and created object with name ZTEST. Following the online documentation I came to the point, where I have to generate include program. I made all the nessesary inputs (using Z prefix) but faced
"Function module name is reserved for SAP"
Creating everything similarily using some of our registered namespaces (/somenamespace/) I succeed to generate the Update program and to integrate it in my Z-programs as well.
My question is: is it possible to use Change Document Object-names without predefined namespace - being a regular customer developer, but not an SAP developer - means, if I am allowed to manage programs in the customer namespace (Z,Y, X) only. If yes, how to do this?
Further (I decided not to open a new thread) - generated Update program uses
CALL FUNCTION 'xxxxx' IN UPDATE TASK
for creation of Change Numbers for generated Change Document Object. This CALL doesn't work when I implemented it in my Z-program, but when changed (IN UPDATE TASK was commented) - everything goes well and the system creates records in CDHDR/CDPOS tables for my object class and table.
Why is that? According to the documentation I shoud only fill appropriate variables for the Change Document Object (class, tr.code, etc.) and call generated FM, nothing is pointed out about any possible problems? Am I doing something wrong?
Well, to be precise, I think I have to give a sample:
1. I have a sample Z-table with few fields (their data elements are marked as Change-Document relevant).
2. Using own z-progam I created a new record for this z-table. Also fill all the nessesary variables included in the interface of generated FM for Change Document Object (for example - FM-mane CD_CALL_my_object).
3. I call the CDO FM.
4. Check what is happening (directly in both tables CDHDR/CDPOS or using FM CHANGEDOCUMENT_READ).
Further, I perfom the steps from 1 to 4 updating the created in previous loop record in my Z-table.
In both cases if the FM 'CD_CALL_my_object' is called IN UPDATE TASK nothing happens, but in case of direct call (without addition IN UPDATE TASK) the system behaves as expected. Well, obliously I can change the generated code for our production needs, but it doesn't seems to be the correct decision - in case of next possible modification of the Change Document Object definition, respectively in need of re-generation of the code.
Any hints are wellcome.
Thanks in advance.
Ivaylo Mutafchiev
Edited by: Ivaylo Mutafchiev on Jan 24, 2008 10:24 AM

"IN UPDATE TASK" resolved by myself. The one should explicitly call 'COMMIT WORK' from Z-program after CALL FUNCTION '...' IN UPDATE TASK in order to get changes in the CDHDR/CDPOS commited. The key in this issue for me was to check the documentation of CALL FUNCTION :-).
Regards,
Ivo

Report for Change documents in Solution Manager.

Dear Masters,
In Solution manager, we are monitoring the inbound support messages through the Transaction code CRM_DNO_MONITOR.
Here i can veiw the status of support message as of now, but i am not able to see the changes done throughout the process.
Is there any report where i can find the data for changes done on the support messages for the given period?
I can find the change documents where by entering into the support message in Menu bar under Extras > Change documents.
But my requirement is i required this report for the some number of support messages for the given period.
Your help will be much more appreciated.
Thanks,
Panneer

hi
is this te one are you looking for
[http://help.sap.com/saphelp_smehp1/helpdata/en/43/2f40b6853e0d23e10000000a1553f7/frameset.htm|http://help.sap.com/saphelp_smehp1/helpdata/en/43/2f40b6853e0d23e10000000a1553f7/frameset.htm]
jansi

Change documents of material master classification class type 001 and 300

Dear guru ,
I want to see the history of change documents of material master classification using MM02.
The system allow to see the history only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
I must do some settings or the function for these class type arenu2019t available ?
Thanks.

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

Creation of Change document for HR Assignemnt Infotype in Transaction- CR02

Hi,
I have to create change document for HR Assignment in Transaction CR02.
I have gone thru the documentation available in SAP help.
Please help me if anybody has worked on it.
Thanks & Regards,
Alok.

Hi Raja,
I didn't quite understand what you mean by creating/changing data using transaction codes, because within SAP MDM 3.0 you are in a portal environnment and don't work with transaction codes.
General remark: Information on the up-to-date MDM 5.5 is provided in the Service Marketplace. For an overview of MDM 5.5, see also http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/mdm/capabilities provided with sap mdm 5.5.pdf.
Kind regards, Markus

Change documents in POP2

Similar Messages

Maybe you are looking for