Change DWS

Hello,
I received a request to change the DWS from FREE to working for some particular days only in a year. Can I go ahead and carry out the changes thru PT03 or what would be impact if I do it that way?
Regards
Naveen

Hello,
  To change  particular days only in a year for a specific Employee you can  to change in theinfotype 2051
enter the date and selet chnage and replaece the shift from 1SFT (working day) to FREE (weekly off) save it
   Monthly Calendar it will automatically creates Substitutions and you can identify the shift chnage in DWS.
Regards
Sr!

Similar Messages

  • What's wrong of my rule about DWS?

    Hi,
    I write a rule, but it's always give me error message:
    Z006
            VARSTFIRST
              N
              Y
                VARSTDAYPG Daily work schedule
                    COLOP*    
                  Q
                    HRS=SNTB  
                    HRS-PBEG  
                    HRS?SNTB  
                        COLER75   
                      =
                        COLER74I  
                  QQQQ
                    HRS=SNTB  
                    HRS-PBEG  
                    HRS?SNTB  
                        COLER75  
                      =
                        COLER74I  
    Detailed definition missing, variable key must have following layout: Y Q X
    Message no. 5P002
    Diagnosis
    After using a decision operation you must add the operation specifications to the variable key.
    Procedure
    Include the return values of the operation in the variable key. The error message shows the correct structure of the variable key. Enter the specification in those places marked with an 'X'.
    I find if I change "Daily work schedule"  "Q" from to 1 CHAR to 4 CHAR "QQQQ" ,it will not give the error message.
    so I wonder if what's wrong of my rule? or if the systme not permit use 1 CHAR name at DWS?
    who can help me?
    thanks!
    Olivia Yang

    Hi Olivia,
          Could you please explain what SNTB does... Help me try understand this in brief.
    Thanks
    Suraj L

  • How to prevent BGP code 6 (Cease) subcode 6 (Other Configuration Change)

    Can anyone tell How to prevent BGP code 6 (Cease) subcode 6 (Other Configuration Change) ?
    We are facing frequent problem with this error. Please suggest how to stop this.... 
    Note :- We are using BGP VPN between this peers.
    Logs :
    Date/Time     : 2015-04-30 00:49:40+05:30
     State         : Up
     Date/Time     : 2015-04-30 00:39:05+05:30
     State         : Down
     Error Code    : 6(CEASE)
     Error Subcode : 6(Other Configuration Change)
     Notification  : Send Notification
     Date/Time     : 2015-04-29 18:22:11+05:30
     State         : Up
     Date/Time     : 2015-04-29 18:21:39+05:30
     State         : Down
     Error Code    : 6(CEASE)
     Error Subcode : 6(Other Configuration Change)
     Notification  : Send Notification

    on the same dates you mean the same request are posted in IT2001? ie both full days?
    Please clarify
    usually the Time collision checks are followed only via posting using report rptarqpost and not while applying through portal in ESS
    This is very strange you indicate
    SO you need to check the basic tables first
    You may need to check the collision.
    Collisions Tables V_T554Y and V_554Y_B reaction indicators.
    and V_T508A
    able T582A set to time constraint of "Z
    In backend Pa30 collision works like this
    1) the logical collision, checks if there is an overlap in the validity
    interval of the IT´s (begda, endda).
    2) the physical collision, checks if there is an overlap in the time
    interval of the IT's.
    In the logical collision it is checked if there is an overlap in the
    validity interval if at least one of the records is a full-day
    ( that is the case when you enter a Daily Work Schedule (DWS) )
    So when one of the records has a DWS it is considered to be a full day
    record and the logical collision is taken into consideration.
    If instead you enter the only the time interval manually the records
    are considered to be partial-day and the physical collision is
    performed. In that case only the time interval is important.
    So if the clock times are not entered the physical collision can not
    take place.
    The collision functionality is always based on clock times and dates,
    never on the total nr of hours.
    Edited by: Siddharth Rajora on Sep 21, 2011 4:57 PM

  • DWS variants for hours to be reduced for a particular leave

    I have a scenario wherein leave type A and leave type B have same absence grouping say 2. But hours to be reduced for absence is different for two, say its 12 hrs for A and 10 hrs for B.
    Now if I assign rules for variants, it reads only 1st rule in sequence (fr absence grpng 2) and assign 12 hrs fr both leave types.
    please suggest as to what can be done in this case.
    If i delimit table V_554S_O (assign absence grouping) and change the abesence grouping to accomodate my requirements, will it affect the rules created for earlier work schedules, where and how this change will impact...as absence grpng will change to a new one.
    pls suggest
    thanks

    Hi
    I have tried it through counting rules, however I am facing some issues:
    1) can we effect two of the absences using DWS variants only, and the one by using counting rules
    2) if I define counting rules accordingly, assign the counting rule to absence type....what other steps do i need to take to effect that in the absence quota to be reduced.

  • Work Hours Threshold changing ,what effects?

    Hi Gurus,
    We are planning to change the threshold of Payperiod hours from 80 to 86 hours. Please suggest me how this affect present configuration in Time and Payroll. The present configuration is for 80hours bi-weekly. Anything greater than 86 hours per payperiod is paid @1.5 times and anything greater than 80 and less than 86 is paid @1.0 times.
    My Question if the threshold is changed from 80 to 86, what configurations/considerations need to made in Time and Payroll and also Py-FICO posting.
    Thanks in Advance

    G
    Ideally I think your talking about this situation. DWS =8 ,PWS=5 Weekly =40  Monthly = 52/1240 =173.33 and Yearly 5240 =2080 
    As per you requirement I Think client want to pay more than 176 hours worked. For this you have to maintain them in over time rules and T511k  Tables  , here you can also make 173.33  to 176  as these value will be reflected in IT0008 .for deriving the hourly rate of pay  which is used in all the pay related calculations.
    Veda

  • How to create site using DWS with "use unique permissions" set to false?

    Is there web service call that can set newly created site (created using dws web service) to NOT use unique permissions?
    Or how to make site to inherit parents permissions? (using web services)
    Thank you
    Komgal

    I actually have a different definition for this web service than the one specified. I possibly have an older version of SharePoint Foundation 2010.
    The one I get from SitesSoapClient is as such:
    string SitesSoapClient.CreateWeb(string url, string title, string description, string templateName, uint language, uint locale, uint collationLocale, bool uniquePermissions, bool anonymous, bool presence)
    OK, different declaration, but no problem: just put in some fields and we're good, right? As it turns out, that's not the case. I get an empty exception being thrown (actually the FaultException says "Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException'
    was thrown." which tells me almost nothing about the problem) every time I call this function. I've altered all the parameters to check if there's maybe something wrong with what I'm passing, but I can't figure out what the problem may be.
    For the record, here's my code snippet:
    SitesSoapClient client = new SitesSoapClient(binding, endpoint);
    client.CreateWeb("MyWebBD", "My New Website", "My description", "STS#0", 1033, 1033, 1033, false, false, false);
    ... I've tried changing "MyWebBD" to different things, such as to the absolute URL "HTTP://blahblah/MyWebBD" . I've also tried changing the title and the boolean values, none of which seems to make any difference.
    Anyway, I know this is a thread from 3 months ago, but I'm wondering if there's a solution to this or am I SOL for now?
    P.S. I noticed that there are at least TWO web service definitions on MSDN that are slightly different. The one I went to initially was
    http://msdn.microsoft.com/en-us/library/sites.sites_members(v=office.12).aspx and eventually when I was looking for how to create a SharePoint site, I found
    http://msdn.microsoft.com/en-us/library/websvcsites.sites_members.aspx . The latter page at least shows a definition for "CreateWeb," where the former does not. Not sure the relevance of this information, but it seems there's something de-synchronized
    between the two. Possibly an older version of the page or something?? 

  • DWS Variant

    Hi All,
    Can any one please guide me what is the meaning of this variant & what is the impact it will have on TM.
    Rule                No                            Hol.Cal                        HolCL/NextDay                    Day                             Variant
    15                   1                          .XXXXXXXXX                XXXXXXXXXX                  XXXX..                                W
    Please provide your valuable inputs.

    As the above thread says, we can give some exception by using a variant.
    As per his e.g. we can say every friday is 6 hrs, instead of 8 hrs. But if ift's every day, it can be done by using a DWS itself.
    But if the requirement is like this, 'friday will be 6 hrs ,if the following saturday is public holiday'.
    then u create a variant that will look like this
    X.......... (first field is X, says first day is not a public holiday)   .XXXXXXXXXX (First field is dot, selected all the holiday type except 'not a public holiday'. It shows second day is some kind of holiday), in the third column u can see seven spaces that represent 7 days. we mark ....X.. (fifth space as X, says Friday. It represent first day is Friday. We give some name for these condition (that is variant name), let us say 'W'
    Go to DWS, copy ur normal working day, add variant name (in between the DWS short name and text), change the timing (instead of 8hrs, give 6 hours interval) and save.
    When u add this DWS in WSR, the rules will be applicable.
    Hope u got some idea.
    Regards
    JINU

  • DWS - Planned wkg time

    I copied, DWS from already created ones, when I add work start time 6am and work end time 15.30 pm it automatically shows work end time as 16.00 hrs and planned wkg hours - 9 hrs
    Is this correct? if so why?

    I agree, I checked the break  schdule, it is for 1 hr after 4 hrs.
    When user sends me a request to create a DWS/Shft code, this is how the information comes:
    Code - 9b
    desc- ist shift
    work start time - 6 am
    work end time - 15.30 pm
    start date - 1/1/1900
    end date - 12/31/9999
    and no mention of break time.
    So i copy the old similar DWS and change the values accordingly keeping the old break schedule and save. And values change as follows:
    Code - 9b
    desc- ist shift
    work start time - 6
    work end time - 16.00
    start date - 1/1/1900
    end date - 12/31/9999
    Am I doing this correct?

  • Process Changes Drirect Deposit Paymethod from 'Unpaid' To 'Paid' ???

    Dear All ;
    i am using kuwaiti payroll , Till now i could not change the payment method status from 'Unpaid' To 'Paid' , so please what is the process to do this ??
    Best Regards

    Hi,
    Ravi Shankar,
    Create  a new Break Schedule ,change the break schedule from unpaid break to paid break and than in DWS Delimit the DWS inserting new Break schedule.
    Than u have to generate the work schedules .
    You can see the changes in 0007
    Warm REgards,
    Kapil Kaushal
    Edited by: Kapil Kaushal on Nov 19, 2008 10:38 AM

  • BADI for changing fields during Creation of BP in CRM

    Hello to everyone,
      I need to find a BADI (or other way) to default several fields during BP creation in CRM (4.0 SR1 SP9). The fields I will like to set are TAX TYPE, TAX NUMBER, TAX CATEGORY, etc.. I have found the BADI BUPA_TAX_UPDATE but i dont see any suitable parameters (structures) to changes these fields. Please advice and thanks in advance.

    Hi
    If you use function BUPA_NUMBERS_GET then your BP number will already be buffered and you can avoid a DB read. It may also be that the BP is not in the DB yet anyway.
    You can only pass one GUID in at a time - loop through IT_CHANGED_INSTANCES into a variable of type BU_PARTNER_GUID and pass that into the function as input parameter IV_PARTNER_GUID.
    Cheers
    Dom

  • How to restrict manual changing of free goods in sales order

    Hi ,
    Goodmorning ,
    We have some requirement : In sales order free goods quantity determination by system  should not be allowed to change manually , where can we do this ?
    Looking for your inputs
    Thanks and regards
    Venkat

    As per SAP Standard, when the main Item quantity is changed, the Free Goods are redetermined. In this case any manual changes to Free Goods Quantities are lost.
    But your requirement is for restricting the Chages of the Quantity of Free Goods Correct?
    I believe there is no SAP standard solution for this. You will have to apply a User Exit, which will check the Item category of each LIne item & if it is free goods (TANN) then changes are not permitted.
    Hope this helps.
    Thanks,
    Jignesh Mehta

  • Sy-tabix value has changed...

    Hi Gurus,
    I  am using a code like dis...this is not the actual code m using instad m sendin u a sample program so that u can understand the problem
    There is a selecvtion for Customer.
    sort itab by kunnr.
    loop at itab.
    on change of itab-kunnr.
    wkunnr = itab-kunnr.
      read table zitab with key kunnr = itab-kunnr.
    endon.
    if itab-kunnr = wkunnr.
    wdmbtr = wdmbtr + itab-dmbtr.
    endif.
    at end of kunnr.
    ftab-kunnr = wkunnr.
    ftab-dmbtr = wdmbtr.
    append ftab.
    endat.
    endloop.
    Now my problem is that  AT END OF Kunnr is working fine for the first customer or say for single customer but when there are multiple customers  AT END OF kunnr is triggring for each entry.......
    In debug MOdei can see that as soon as read table  syntax is used the tabix value is changed....
    So Can anyone suggest what is the solution....
    Regards,
    Raman

    This is the Declaration
    DATA:  BEGIN OF ITAB OCCURS 0,
                      KUNNR      LIKE BSID-KUNNR,
                      BELNR      LIKE BSID-BELNR,
                      BUKRS      LIKE BSID-BUKRS,
                      GJAHR      LIKE BSID-GJAHR,
                      BUZEI      LIKE BSID-BUZEI,
                      SHKZG      LIKE BSID-SHKZG,
                      VALUT      LIKE BSID-ZFBDT,
                      SGTXT(70)  TYPE  C,
                      ZFBDT      LIKE BSID-ZFBDT,
                      ZBD1T       TYPE BSID-ZBD1T,
           ZBD2T       TYPE BSID-ZBD2T,
           ZBD3T       TYPE BSID-ZBD3T,
           REBZG       TYPE BSID-REBZG,
           NETDT       TYPE BSID-BUDAT,
                      ZUONR      LIKE BSID-ZUONR,
                       BLART      LIKE BSID-BLART,
                      DMBTR      LIKE BSID-DMBTR,
                      SPART       TYPE VBRK-SPART,
                      DAY    TYPE RFPOSX-VERZN,
                      FLAG TYPE C,
                      CITY        TYPE KNA1-ORT01,
           NAME1       TYPE LFA1-NAME1,
                     CR_DR1(4)  TYPE C,
                      PSWSL      LIKE BSID-PSWSL,
                      ZTERM      LIKE BSID-ZTERM,
                      VBELN      LIKE BSID-VBELN,
                      UMSKZ      LIKE BSID-UMSKZ,
                      KLIMK      LIKE KNKK-KLIMK,
                      VTEXT      LIKE TVZBT-VTEXT,
                      ADV        LIKE BSID-DMBTR,
                      REBZT       TYPE BSID-REBZT,
                      XBLNR      LIKE BSID-XBLNR,
                      VTEXT1(70) TYPE  C,
                       FKLIMK    LIKE KNKK-KLIMK,
                      ABC(4)     TYPE C,
                    AGRO(4)        TYPE C,
                      BIO(4)        TYPE C,
                      SKFOR      LIKE KNKK-SKFOR,
                      SSOBL      LIKE KNKK-SSOBL,
                      CTLPC      LIKE KNKK-CTLPC,
                      OEIKW      LIKE S066-OEIKW,
                      OLIKW      LIKE S067-OLIKW,
                      OFAKW      LIKE S067-OFAKW,
                     NAME1      LIKE LFA1-NAME1,
                      BUDAT      LIKE BKPF-BUDAT,
                      D_DMBTR    LIKE BSID-DMBTR,
                      S_DMBTR    LIKE BSID-DMBTR,
                      VORGN      LIKE BSEG-VORGN,
                      WERKS      LIKE BSEG-WERKS,
                      NAMESO     LIKE KNA1-NAME1,
                      NAMEAM     LIKE KNA1-NAME1,
                      NAMERM     LIKE KNA1-NAME1,
                       NAMEDR     LIKE KNA1-NAME1,
       END OF ITAB.

  • ANY SY-INDEX REFLECT CHANGES WHEN CONTROL BREAK STATEMENT PROCESS

    Dear Guru's,
                     I have a requirement where i have to move the values to variable when control break (AT END OF) process. So i want to move the values according to the end of Vendor so for that  i want to know is there any sy-index available which reflects changes when Control break (AT end of) process.
    LIKE Sy-subrc = 0 when select statement fetches record or sy-tabix is like counter for loop.
    Hope to get reply soon.
    Regards,
    Himanshu Rangappa

    Hi,
    There is no system Fields for it.
    But your requirement can be done with 'AT NEW' and 'AT END' statement.
    Refer this sample example,
    loop at otab.
        at new module.
          move otab-module to otab2-module.
        ENDAT.
          at END OF effort.
          sum.               "Do your calculations here
          move otab-count to otab2-count.
          append otab2.
        endat.
      endloop.

  • How to change SSO Partner Application Login_url and Logout_url

    As part of a deployment in a different data centre, we needed to change the domain name of an application using SSO for authentication. We have gone through the process of re-registering the SSO server but this does not update the domain name
    By using diagnostic tools from Oracle we have discovered that the file 'osso.conf' in $ORACLE_HOME/Apache/Apache/conf/osso contains incorrect entries for login_url and logout_url.
    These settings are of the form:
    login_url=http://www.ourolddomain.com/pls/orasso/orasso.wwsso_app_admin.ls_login
    logout_url=http://www.ourolddomain.com/pls/orasso/orasso.wwsso_app_admin.ls_logout
    Please can anyone tell me how these settings can be changed.

    Hi,
    [Solved] SSO fails to show success page you can find some information on re registering mod_osso.
    Hope it helps.

  • Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Battery , time , signal strength bar is not getting displayed in home screen , these will be displayed only when i click on any app. Can u let me know the setting change ?

    Did you check the Zoom setting?
    Have you tried a reset (reboot)? Hold HOME and SLEEP until an Apple logo appears.
    If it isn't Zoom and a reboot doesn't help try Settings/General/Reset - Reset all settings

Maybe you are looking for