Change Dynamic Link?

Hi guys
I run Pr CC on a Win7 64bit machine and reloaded all my CC programs recently. Previously my dynamic link was set to Audition but now it set itself to AE. I cannot seem to find a way to change it back to Audition in the preferences, which is my regular work flow.
Can anyone point me in the right direction please?
Regards,
Graham

There is no Dynamic Link to Audition, never has been. CS6 and earlier used it for PP, Encore and AE. CC only uses it for PP and AE. The connection to SpeedGrade is called Direct Link, and the 'connection' with Audition and Photoshop is something else entirely.
There are no user settings for Dynamic Link.
What is the actual problem you're trying to solve here?

Similar Messages

Encore not re-transcoding changed dynamic link projects

Although I'm pretty fluent with CS products, I'm new to video editing so I apologize if this is a newbie question. I currently have an Encore CS5 (Mac) project that dynamic-links several sequences in several Premiere Pro CS5 files. My project is encoding to 4.72 gigs and I need to fit it onto a DVD-5. In an effort to trim down the file size, I've shortened the credits on several of the movies, but no matter what I do, Encore doesn't update the movies. I have to remove the Premiere and timeline assets from the project panel and re-insert them. Even right-clicking the asset in the project panel and clicking "transcode" doesn't do the trick. I only have one version of these projects (so it's impossible that I've added the wrong Premiere Pro file). I know I can always turn down the maximum bit rate, but I was trying to keep the project at maximum quality. What am I missing here? Thanks for the help!

I have to remove the Premiere and timeline assets from the project panel and re-insert them. Even right-clicking the asset in the project panel and clicking "transcode" doesn't do the trick.
Doing the transcode now option won't fix anything. Until Encore can break the previous tie with the original sequence, nothing will change..This is where the mystery of Dynamic Link needs an answer..
If you can delete the assets from the timeline, and re-drag the linked sequence down to the timeline, then this would be ideal. Assuming of course the new link is respected. But i take it that Encore isn't respecting an updated sequence??
This would be the first step in resolving the issue IMHO...

Adobe Media Encoder CC renders do not reflect changes to Dynamically Linked After Effects Comps

When rendering a Premiere timeline with a dynamically linked After Effects composition, Adobe Media Encoder will sometimes use an older version of the linked composition (even after I have saved changes in the After Effects comp).
For example, if I correct a spelling mistake on some text in After Effects, save the composition, and then add the sequence to the render queue in Premiere, the final output from media encoder still has the old spelling.
If I do a straight export from Premiere instead of adding to render queue, the output is always correct. I've noticed this problem on several different Windows 8.1 systems.
All versions of the software are up to date as of today.
Why is this? Is it something to do with the disk cache in After Effects? Does media encoder have it's own cache that I need to clear?

Hi, I've been having this same issue. Here are some additional things I've noticed about it:
Changes are reflected properly when played back on timeline in Pr CC 2014.
Happens regardless if the dynamic link file was rendered or not, thus deleting the render files does not fix the issue.
The issue can persist through saving, closing, and reopening both AE and Pr.
I'm using OSX 10.9.4, so this is not just a PC issue.
Other than manually watching for every change to be reflected in the render, there is no way to know a problem has occurred. Needless to say this can be incredibly costly.
Please address this quickly, it's completely unacceptable that what we render out could be a different version from what we see on the timeline.
PS Some additional things I will be testing:
Does the issue persist through closing all CC apps, including Media Encoder.
Does rendering directly out of Pr, i.e. not using Media Encoder, fix the issue.

Premiere-After Effects Dynamic Link render times vary wildly after minimal composition changes

Here is something strange that happens a lot to me.
I'll have a sequence in Premiere Pro CC 2014 that is entirely or largely an AE comp that I have dynamically linked. I'll use a specific case as an example, but it's happened with various projects.
In this most recent one the visual (but not audio) of my Premiere sequence is one AE dynamically linked comp of about 90 seconds. It's more or less a fancy slide show- some photos with moves, some text, motion blur, masking, maybe a few filters. Fairly basic stuff as far as After Effects goes.
Anyhow, I like to render the sequence in Premiere and then watch it down with music to see if the timing works and make adjustments from there. That's my usual workflow. The strange thing is that when I render, the render times can vary tremendously. With this particular project, one time rendered in about 2 minutes in Premiere. I watched it down and I noticed a spelling error, which I fixed. Just changing one word of text in AE. This, of course, causes the entire linked comp to need to be rendered again in Premiere. This time when I go to render, it took about 20 minutes and it only got about 70% of the way through. A huge difference and all I changed was a couple letters, which shouldn't impact how intensive of a render is needed. What I usually do is cancel the render when it takes that long, then quit Premiere, reopen, and render right away after I open. When I do this, after the application restart, the sequence will then render in the faster approximately 2 minute duration. Almost invariably this is true.
So I end up quitting and restarting Premiere a lot to get the faster render times. But of course that's annoying.
What is going on here?
I know that some might have critiques of the workflow and watching in Premiere and the fact that one letter change forces the entire sequence re-render. I know I could break it up and there are ways around that. But I am not interested in such critiques. My work flow actually is quite efficient when the 2 minute render time happens. Just not when it takes 10x more than that for the same thing. Why are there these huge render time swings?
My guess is that some cache gets filled up, so when the application is just started, and the cache is empty, the render works much better. But I really do not know.
Help please.

There is currently a bug that causes Dynamic Link performance to be poor when the main After Effects application is running. (The underlying issue is that the main After Effects application is sending many more messages during Dynamic Link than it needs to.)
The easy workaround is to quit the main After Effects application when using Premiere Pro to process a dynamically linked After Effects composition.
This bug is fixed in an update due to be released in less than two weeks.

Failure to configure windows updates. Reverting changes.....ordinal 282 could not be located in the dynamic link library

Hi,
My laptop (Lenovo Amd athlonII P360 dual-core processor) with OS windows 7 shutdown accidentally during updates. From then on I could log in to my system but it keeps popping up some error messages like....
tpsdsvc.exe-ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
concentr.exe--ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
AdobeARM.exe----ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
.Net EventWindow...MFManager.exe----ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
SLRuntime.exe---ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
IDVault.exe---ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
when I try to open IE browser..it pops up ieexplorer.exe------ordinal not found----ordinal 282 could not be located in dynamic link library iertutil.dll
My chrome browser stopped working...it opens but when I type any url...it just stays inactive...nothing happens
Even I'm unable to uninstall chrome through control panel. Nothing happens. I'm writing this through mozilla firefox. And even i cant update this browser. It says firefoxInstalle.exe---ordinal not found.
It always gives install update notification but when i try to install updates...it says failure to configure windows updates. reverting changes...
so far i tried sfc /scannow, restore points, safe mode, iertutil.dll file exists in c:/windows/system32...etc,.
I appreciate any solution on how to fix this problem and what is causing it?

Hi sravy,
Would you please let me know whether refer to Susan’s suggestion and check if it may be a hardware/harddrive
issue? Any find?
à
My laptop (Lenovo Amd athlonII P360 dual-core processor) with OS windows 7 shutdown accidentally during updates.
Did you find any dump file after the Windows 7 crashed? If find dump file, please refer to following KB and
check if can help you to analyze the dump file.
How to read the small memory dump file that is created by
Windows if a crash occurs
In addition, as Susan said, this forum is for Small Business Server. Based on your description, your problem
was just occurred in Windows 7 OS. I suggest that you would post your question in
Windows 7 Forum. I believe we will get a better assistance there.
Hope this helps.
Best regards,
Justin Gu

Premiere Pro exports fail to recognize changes made to Dynamic Link through After Effects

Hi there,
I am having an issue with Premiere Pro CC and Dynamic Links/After Effects CC.
I will be working within the PP CC timeline using footage, and then add motion graphics using Adobe Dynamic Link to AE CC. I notice an error in timing, or spelling, colouring - literally any type of error in AE CC that I want to correct. I go to AE CC and make the correction, go back to PP CC, and it shows up as changed. I go back to AE CC, purge media cache, memory, etc. and save the workfile. I go back to PP CC and export using Media Encoder. After waiting for the export to complete, I find it maintained the same error from a previous edit.
Does anyone know why this would be? Is there any way to avoid having to restart every time I make a small change to an edit?
Thank you in advance for any insight.

It has now happened to myself and my co-worker. The only way we have been able to "solve" the problem is by deleting cache/restarting both programs/restarting the entire computer. It shows up as changed within the Premiere project, as well as in the preview in Adobe Media Encoder - and then the final output does not reflect those changes.
Another suggested workaround to anyone else out there who is problem solving is exporting directly from Premiere, but none of these solutions seem to work 100% of the time, nor really address what this problem really could be stemming from.

Change encore timeline from premiere pro cs5 via dynamic link?

I'm sure this has been covered before, but I can't find
anything on dynamic link in this forum.
I created my video in encore, and exported the sequence to encore via dynamic link.
I then created all my menus etc. in Encore, after which I noticed a couple of glitches I wanted to change, so I went back to premiere and edited the changes.
How do I get encore to pick up on these changes? It didn't happen automatically as I had hoped, and I don't want to have to recreate my menu structure again in Encore.
So, basically, how do I make a change in Premiere, and have it reflected in my Encore project without creating a new project?
thanks,
Andy

I have a similar problem:
I created a project in PremPro CS5, then used Adobe Dynamic Link which loaded into Encore
where I created menus then saved off both PremPro and Encore.
Today I opened each to make add some titles in PremPro, however, Dyn Link did not send them to Encore
as I assumed it would. How do I get link to do what I have been lead to believe it will do, that is, carry
over changes from PremPro to Encore?
(I tried "Revert to Original" botton suggestion but Encore does not give me this option.
Seems like a strange suggestion since I want to update not revert.)
Details would be helpful.
Thx

Adobe pr pro cs4 dynamic link to Encore cs4: updating changes made to pr pro timeline

Recently I did a project in adobe pr pro cs4 and exported it to encore through adobe dynamic link to create a DVD. When I saw some mistakes, I went in pr pro and corrected them. It automatically updated the chages in encore. Finally, I created my DVD and burned it. Next day, I saw a minor spelling mistake so I opened pr pro and encore separately but any corrections I did in pr pro did not updated in encore! What is a better way to correct this as I do not want recreate the whole DVD project again by sending it again through adobe dynamic link?

You have to go into Encore and select Revert to Original for your Linked timeline. Any changes made after transcoding won't show up without reverting. And yes, that means you have to transcode again.

After Effects CS5.5 will not open a Dynamically Linked Premiere Pro sequence in the comp. window

Hi all,
I'm trying to export a Premiere Pro sequence which is in 2K and the footage has been shot as RED 5K. Adobe Media Encoder will simply not work as I am having the quite widely discussed issue where it will just 'hang' at certain points and not complete the export.
The most popular solution to this problem is to export via the Render Queue in After Effects instead. However, therein lies the problem.
I go onto After Effects. Choose File -> Dynamic Link -> Import Premiere Pro Sequence.
The box pops up, I choose the Premiere Pro Project File then select the sequence I want to export. It then appears in the After Effects project panel window like so:
However - when I try and drag this to a new composition window, one of two things have happened. Either A) nothing happens (literally, NOTHING changes) or B) as the following example shows, it seems to add it to a new composition, but the video is entirely black. I have tried rendering it and it just produces a black video.
The other thing people seem to suggest is to just import the entire Premiere Pro sequence into After Effects. I've tried this, but any titles I have added in PP force the video to fade out then back in, in the place where the title should be?? So I can't export the video this way either.
My system is as follows:
Thanks massively in advance for any help that is provided!

This is months old but I'm now having the same problem with AE and Premiere CS6 after updating last night: Dynamic linked sequence shows up in the project window in AE and even plays video if previewed, but will not drag or alt-drag into any comps, including a new comp (makes a new comp with matching settings, but empty).
Furthermore, I do actually have an earlier version of the same sequence placed in one of my AE comps, which I think was done using the same steps just prior to updating the apps last night. Did this break?
I'm a little concerned since the biggest reason I'm trying to use premiere is to eliminate the exports when adding graphics in AE.

Dynamic link confusing two separate AE compositions in PPro from different projects

I am using CS5 Master Collection for Windows 7 (64 bit) on an HP Pro desktop (Intel core 2 duo, 6Gb RAM). The tower has two hard drives installed (no RAID). CS5 is installed on the original C drive along with the OS, but the working files, footage etc are all on the larger, secondary F drive.
I am working on a DVD project consisting of several seperate PPro projects. Each project has been colour corrected in AE using dynamic linking. Recently two of my projects suddenly became mixed up, by which I mean the video (not the audio) from one AE composition in one project has taken the place of another in another project. The clip remains the same length, but the link apears to be referencing the wrong clip during playback. Interestingly, there are two clips on the track above the affected clip that fade out and in at either end, during the dissolves between clips, the correct footage plays. It is only when the clip plays by itself that the problem occurs. The next clip also has the same error, though the problem only occurs for half the clip and then suddenly corrects itself. Just to be clear, All clips have been rendered, there are no more than two video tracks on the sequence, and I have tried replacing the composition from the asset menu (in which the clip plays back correctly), but the problem remains in the sequence.
I hope that descrition is clear enough. My guess is some kind of file path error in the dynamic link, perhaps due to the separate hard drive. But I really wouldn't know. I'm very pressed for time right now and I'd prefer not to go against workflow and re-edit a new composition in AE, I would also like to understand what is going on in case it happens again.
Any help with ths problem would be appreciated,
J

Thanks Colin, I tried what you suggested with both the AE Project that it should be referencing and the AE project it is erroneously referencing but both failed to fix the issue. Its as if a hidden clip were laid over the top of the one I want to play. Frustrating.
Date: Mon, 24 Oct 2011 19:47:03 -0600
From: [email protected]
To: [email protected]
Subject: Dynamic link confusing two separate AE compositions in PPro from different projects
    Re: Dynamic link confusing two separate AE compositions in PPro from different projects
    created by Colin Brougham in Premiere Pro CS5 & CS5.5 - View the full discussion
It's not the comps that are the problem; it's the project file names themselves. You can have all the comps in a project named the same thing, and it'll be fine, but naming projects incrementally is an issue. After Effects includes a versioning function (Save and Increment) that will create a new AE project file with a serial number, e.g. AE Project 01, AE Project 02, etc. This is all well and good if you're just working in After Effects, but Dynamic Link gets confused and will usually start looking at the later project file for comps. That will just create a big mess, as you've found. Changing the names of the project files won't help things relink automatically properly, but it can help you fix things. Make all your DL AE comps offline in your Pr projects, and name your AE projects in a manner that is not serial (give them more random names). Select your offline AE comps, and right-click > Link Media, and point to the new AE project. Things should link up correctly then--but if they don't, you'll just have to remove all the AE comps from your Pr project, reimport the comps from the newly-named AE project, and replace them. It's a pain but it'll probably just keep getting worse if you don't.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3988711#3988711
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3988711#3988711. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: Ybslik

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

I downloaded the latest version of itunes. Now I cannot open iTunes. I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll. Thoughts?

I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

How to keep files from disappearing when using Dynamic link to AE from PremProCS4?

I am at my wits end here and hope someone can offer a solution. I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects. I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead. Here are the steps I do as per the Adobe Classroom in a Book Explains:
I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
I then right click the "clip" and select "Replace With After Effects Comp"
I then name the new file. name or whatever.aep
It opens in AE
I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key. This does not work since I only get a yellow bar above the clip instead of a red on???
So then I save the PremPro project and close it then go to the AE project, save and close it.
When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
I have tried many different ways to do this process including re-importing the .MTS file.
I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project. Once AE is closed it looses the file. On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well. I never change the names so this isn't this reason.
Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
Thanks Kate

Hi Mylenium, and thank you for taking the time to respond.
Your idea of renaming comps got me to thinking..hmm.
So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
So far I figured it out...
Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
In PremPro select the desired clip you wish to place effects on
Rename it and save
R click and "Replace with AE composition"
Name new file
You will see three files pop up in AE in the project panel.
The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
Highlight this file with a click and then go Ctrl H (for PCs)
The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
The source file icon in AE will change to an icon that denotes the true file...save
Go to your still open Ppro project and make sure it carried the effects over..save.
Now you can save and close the AE project.
So for this works for me today and I hope this helps anyone else dealing with a similar issue.
Thanks.

How to keep files from disappearing when using Dynamic link to AE in PremProCS4?

I am at my wits end here and hope someone can offer a solution. I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects. I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead. Here are the steps I do as per the Adobe Classroom in a Book Explains:
I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
I then right click the "clip" and select "Replace With After Effects Comp"
I then name the new file. name or whatever.aep
It opens in AE
I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key. This does not work since I only get a yellow bar above the clip instead of a red on???
So then I save the PremPro project and close it then go to the AE project, save and close it.
When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
I have tried many different ways to do this process including re-importing the .MTS file.
I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project. Once AE is closed it looses the file. On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well. I never change the names so this isn't this reason.
Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
Thanks Kate

Hi Curt, and thank you for taking the time to respond.
Its odd how I've been trying to figure this one out for a long time and I tried your suggestion but it didn't make any difference..darn.
In the AE forum they say this is quite common and no one really knows why...double darn.
So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
So far I figured it out... I guess I just needed to ask the question and write it all out to help get my brain working in the right direction:
Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
In PremPro select the desired clip you wish to place effects on
Rename it and save
R click and "Replace with AE composition"
Name new file
You will see three files pop up in AE in the project panel.
The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
Highlight this file with a click and then go Ctrl H (for PCs)
The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
The source file icon in AE will change to an icon that denotes the true file...save
Go to your still open Ppro project and make sure it carried the effects over..save.
Now you can save and close the AE project.
So for this works for me today and I hope this helps anyone else dealing with a similar issue.
Thanks.

Erratic performance / missing footage with Premiere Pro CC and After Effects CC 2014 dynamic links

Hi all,
I briefly touched on this amongst a host of other issues I has having while cutting my last project.
Unfortunately I never heard anything from anyone regarding my issues with the Dynamic Link system.
I had to bite the bullet and export (2-4K RAW) chunks of my last project, out of premiere using a Quicktime animation codec. This added an extra week to the post production process (which I did NOT get paid for).
I'm also a bit frustrated because it pushed the project past the deadline. Though the client was understanding, they were far from thrilled and it reflects poorly on me.
Anyhow. Project complete, on to the next-
This time, I'm using mostly footage shot from an FS700 in AVCHD. I figured maybe the RED footage was somehow too much for the program to handle with my specs, however I am having the same issue as last time.
I'll select a clip, or group of clips, go to replace with after effects composition, and sometimes they all make it, and often times they don't. The clips were shot within a couple minutes of one another and no settings were changed on the camera.
I've noticed sometime's the media will show up in the timeline, but not appear on the monitor (as pictured below). Other times the name of the clip will appear in the comp, but there will be nothing on the timeline OR in the monitor.
Never had this problem in CS6.
Adobe or anybody, please help! This is absolutely killing my workflow, and costing me time and money.
Here are my specs:
I'm running Adobe Premiere CC 2014 v8.1
Freshly installed Windows 7 Professional SP1 PC Desktop
Freshly installed Samsung 1TB SSD running my OS and Adobe CC
Intel Core i7-2600k CPU at 3.4GHz (8CPUs) - Watercooled
16GB Ram (3gb allocated for other programs)
Nvidia GeForce GTX 570 4GB GDDR5 - 3.40.62 Drivers installed
Pulling media from 2x 3TB Seagate Barracuda 7200RPM drives, striped at RAID 0
In this case pictured the second two clips in the sequence linked into AE, but the first wont show up in my monitor.

Thank You, Jim -
Unfortunately that specifically did not work.
Based on another comment sent to me, here is what did.
In PProCC
File > Adobe Dynamic Link > New After Effects Composition
In AECC
From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
Back in PProCC
File > Adobe Dynamic Link > Import After Effects Composition
Magic.

Change Dynamic Link?

Similar Messages

Maybe you are looking for