Change E-mail for system user BWREMOTE

Dear All,
How can i change the E-mail for system user BWREMOTE, i tried in SU01 email field is empty in communication tab, checked in BW and ECC no details were maintained. Currently this user is able to send emails, would like to change the email address to this user.
Thanks,
Kartik

Hi Kartik
For this you have to maintain the list of process and email note faction when process chain failed in transaction code RSPCM in BW system
and also you can refer the SDN inks
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304c3146-8eb9-2d10-d787-b6dc2d368cb2?QuickLink=index&…
BR
SS

Similar Messages

How can I change the password for the USER in SAP.

How can I change the password for the USER in SAP?
also I want to change the Language and date Format b/c it's displaying in German language..

Hi,
Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
Now, system will ask for new password to change.
If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
Enter User's id and Click Change icon.
It will lead to Page: Maintain User.
Here, Select tab: Logon Data
There is a Sub-Tab: Password.
Here, key-in change password and SAVE.
For Language and Date format, contact your Basis-Personnel.
Best regards,
Amit

Schedule Send Execl Report by E-mail to System User

Hello:
I need to schedule send Excel Report by E-mail to system user internet address. If only define the job by Reprot Agent? Do we have other method?
Hope this clear!Can you give some advice?
Regards&Thanks
zagory

Hi zagory,
i forgot one tech issue to be setup: The internet Mail gateway needs to be setup if you want to send proper e-mails.
presupposed all tech. issues are solved, I agree with my colleague. Setup is fairly easy to handle, as soon as you know the customers demands like
- who is allowed to send
- who will do it in the future
- who are the recipients
- when should the precalc. take place/when should the Workbook be executed (Timepoints, after dataupdate ...)
for authorisations check out object: s_rs_bcs.
also make sure that the executor has permissions for the backgroud user (serach in TRC SU21, i can not remember.)
if all is known = approx. 2-3 days until go live, depending on the complexity of the existing scheduling and the authorisation concept.
Not to mention the training for all that and the tchnical setup.
hth
cheers
Sven

Changing default tablespace of SYSTEM user

Hi all,
What impact it wouuld have on database if i change the default tablespace of SYSTEM user?? actually i have got a strange env where th default tablespace for system user is tools and that for OUTLN is system
please share your view and experiences
Thanks and Regards
VD

hi thanks,
i know there is no performance issue using non system tablespace for system user, but we do follow some nomenclature structure thats why i am asking the question..so i am going to change its tablespace of user system from TOOLS to system with
SQL> alter user system default tablespace system;
command, and not expecting any complications..
Thanks and Regards
VD

Change of UID for Oracle user - Impact

If change of UID for Oracle user in solaris will affect the database which is already running. Wil it have any impact for the databases?
Guys please advise.
Thnx,
Satheesh

Many thanks for the response. We are not changing the UID but there are some errors in the script related to file permissions. So just wanted to know will it have any impact on the database if we change the UID.

Voice mail for one user with two extensions

Environment:
Cisco Unified CM Administration System version: 7.1.3.30000-1
Cisco Unity Connection Administration Version 7.1.3.10000-68
We have a user this year that will be wearing two hats and will have offices in two different locations. I have both extensions as a line on each phone. Now I just need to point both extensions to the same voicemail box or give the user two mail boxes. It seems that CM Administration only supports one voicemail box per user. I think it would be easier for the user to only have to check one mail box by having both extensions point to the same VM. How can I accomplish this?

Hi Andy,
Let's say the user has numbers 7005 & 8450 but we want only one mailbox
@ 7005. There are a couple of ways to do this.
In CUCM go to> Feature> Voicemail> Voicemail Profile and create a new Profile called XXXX (whatever name you want) with a Description called "XXXX username Mailbox" the Voice Mail Box Mask will be 7005> Save
Then via CUCM go to the Users Phones> under Directory Number Config for 8450> Voicemail Profile and change to XXXX (created previously in above steps)>Update>Reset
Now when a call routes via forward to Unity Connection it will reach the Mailbox @ 7005.
Or in Unity Connection set up Alternate Extension so that 8450 is an Alternate Extension for 7005 etc.
Cheers!
Rob
"I don't know how, I don't know when
But you and I will meet again "
- Tom Petty

Change display name for existing users

Hi,
We have alot of users in our Active Directory. After an migration our existing users are displaying their name wrong. When we create a new user the display name is set FirstName LastName. But all of our old users have their User logon name as display name.
Is there a way to change the display name of our old users to FirstName LastName instead of the user logon names they are displaying now? Doing this per user is a hell of a job so this really isn't an option.
Example:
Full name: Peter Peterson. User logon name: pepeter. Display name: pepeter. (old user)
Full name: Tom Thompson. User logon name: tothomp. Display name: Tom Thompson. (new user)
Greetz,
Tom

I have found a script for Powershell that may be the answer to my question. There is only one thing that is not in the script. The script runs for all users. The PageSize is set to 2000 so it runs 2000 entries. Is there a way that I can run this script for
all Users in AD that start with the letter "A" or with an other letter. :P
$previewMode = $true #change value to $false ONLY after you have verified the preview!!!
$CurrentDomain = [System.DirectoryServices.ActiveDirectory.Domain]::GetCurrentDomain()
$Domain = [System.DirectoryServices.DirectoryEntry]"LDAP://$CurrentDomain"
$Searcher = New-Object System.DirectoryServices.DirectorySearcher
$Searcher.PageSize = 2000
$Searcher.SearchScope = "Subtree"
$Searcher.Filter = "(&(objectCategory=person)(objectClass=user)(!(objectClass=computer)))"
$Searcher.PropertiesToLoad.Add("userPrincipalName") > $Null
$Searcher.PropertiesToLoad.Add("givenName") > $Null
$Searcher.PropertiesToLoad.Add("sn") > $Null
$Searcher.PropertiesToLoad.Add("distinguishedName") > $Null
$Searcher.SearchRoot = "LDAP://" + $Domain.distinguishedName
$SearchResults = $Searcher.FindAll()
$dnsSuffix = $CurrentDomain.Name
foreach ($Result in $SearchResults){
               $firstName = $Result.Properties.Item("givenName")
               $lastName = $Result.Properties.Item("sn")
               $newLogonName = "$firstName $lastName"
                [System.DirectoryServices.DirectoryEntry]$userObject = $Result.GetDirectoryEntry()
                $oldLogonName = $userObject.sAMAccountName
    Write-Host "Changing $oldLogonName to $newLogonName..."
    try {
        if (!($previewMode)) {
                   $userObject.cn = $newLogonName
           $userObject.CommitChanges()
        Write-Host "$oldLogonName successfully changed to $newLogonName."
    catch{
        Write-Host "Error changing $oldLogonName to $newLogonName."

Can't change home directory for standard users (admin is OK)

I'm can't relocate home directories for standard users. Relocating works fine for admin users.
When a standard user logs in, they get a message (paraphased) saying "the home directory is not available. If it is located on a server, the server might not be online". If I change the standard user to admin, this message goes away, and everything is fine.
I created a standard user
moved the home directory using the terminal as root: mv UserName /otherlocation/UserName
I then went into users and groups, other options and changed the home directory location.
Rebooted, then tried to log in as the standard users.
Next try - Deleted the standard user and created the same user with admin rights. Followed the above steps and everything works fine.
I don't want this user to have admin rights on my system. Any ideas

Hi,
the AFP is has always been switched on. As for the path I believe this to be correct. The path I am using is:
afp://musicserver/Users
I'm not at the server right now so I mat have got the afp and : and / in the wrong order here but they are correct on the server.
This however does not seem to put the a folder in the Users folder. Could it be something to do with my external hard drive? I am using a Mac Mini as our server (not ideal but fine for us, or at least was) this is booted from our external hard drive. This is the main system drive which is where the Users data is also stored. I have tried all possible paths I can thing of from replacing the 'musicserver' with the IP address. I have also tried adding the name of the drive to the path (System) but all does not work.
Are you able to suggest anything I have missed? Perhaps I'm doing the path wrong?
Thanks again
Chris

Changing expired password of "system" user

Hello,
today I got a message that said that "system"-s password is expired.
I used sqlplus:
sqlplus system/mypass@myserver:1521/dwh
Then I got:
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Oct 14 12:05:50 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-28001: the password has expired
Changing password for system
New password:
But when I entered the new password twice after prompting, I got:
ERROR:
ORA-01017: invalid username/password; logon denied
Password unchanged
Weird, can somebody explain this?

user10298630 wrote:
Hello,
today I got a message that said that "system"-s password is expired.
I used sqlplus:
sqlplus system/mypass@myserver:1521/dwh
Then I got:
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Oct 14 12:05:50 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-28001: the password has expired
Changing password for system
New password:
But when I entered the new password twice after prompting, I got:
ERROR:
ORA-01017: invalid username/password; logon denied
Password unchanged
Weird, can somebody explain this?What exactly is weird in it? There must be a mistake in the typing of yours due to which you have got this error, the same worked for me dandy,
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Oct 14 17:19:10 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size                  1247900 bytes
Variable Size              67110244 bytes
Database Buffers           96468992 bytes
Redo Buffers                2945024 bytes
Database mounted.
Database opened.
SQL> conn fortest/test
ERROR:
ORA-01017: invalid username/password; logon denied
Warning: You are no longer connected to ORACLE.
SQL> conn / as sysdba
Connected.
SQL> drop user fortest cascade;
User dropped.
SQL> create user fortest identified by test password expire;
User created.
SQL> grant create session to fortest;
Grant succeeded.
SQL> conn fortest/test
ERROR:
ORA-28001: the password has expired
Changing password for fortest
New password:
Retype new password:
Password changed
Connected.
SQL> +So the reason you got the error is 99.99% a typing mistake. To get back the user working, like others have suggested already, use Sys account and unlock it.
HTH
Aman....

Change NWA language for single user

Hello, gurus!
The question is stated above: how can I change NWA interface language only for single user?
Users in our BPM system are fetched from Active Directory therefore I cannot change (as they advise) user for my user from NWA. It is inactive.
Is there any other solution?

It shows that users are stored in LDAP.
Also I'd like to draw your attention to language preferences in my browser
Desirable language (English) is specified as recommended in guidelines, but NWA nevertheless is showed in Russian as you can see.

Jabber voice mail for some users.

Dears,
J4W voicemail works perfect with default config.xml file for some of the users and for some of the users it shows the attached when clicked on voicemail tab. I have create 2 no's of sevice profile, the voice mail credential set for both service profile is Unified CM IM and presence.
I can understand the prompt as it is asking for voicemail password for that reason i have to create a custom config.xml file and i have to upload in TFTP server, But my concern is why it is working for some of the users without config.xml file and for some users it is prompting for username and password.
Thanks

Dears,
the profile are different, but if i put the the other users working profile also it is not working.
The voice mail server is showing not connected in jabber,
Any hints.
Thanks

How can i change a password for network users?

Good day. I have a problem with changing passwords on server Yosemite. As i understand there is no way to change password for the network users remotely. I mean, when for example someone will change his password and then will forgot it how can i change it? When i open a server manage program and go to the "Users" and than open a setting for the user - "Change Password..." is not clickable.

Hi Dcp24,
If you are having issues resetting a user's account password on your server, you may find the information in the following article helpful (article is aimed at Mavericks, but the steps should be similar in Yosemite):
Mavericks Server Admin: Reset a user’s password
Regards,
- Brenden

Changing Assignment Details for multiple user

Hi everyone,
In the RelationShips tab of a bundle, how can we change the "Assignment Details" for multiple user at once? Per exemple, I have a bundle that have about 100 user assignments. The bundle show on Start Menu but no on the Nal. If we want all of our users to have this bundle on the Nal Windows, how can we instruct that easily and quickly, instead of selecting each user and changing the Assignment Details ?
thank you for your help !
DM

I am also trying to update the shortcut locations on many apps for a mass amount of users. Mr. Pond, or dominicm, can you explain or give a example ZMAN command that would be able to do this? From the documentation I can find it only seems to affect the distribution and scheduling but not the shortcut location.

Send the billing output by e-mail for the user

Hi,
Can you tell me if it's possible to send the billing output by e-mail (Medium = 5 - External send) for the user that create the billing document? the e-mail of the user is in SU01D.
Thanks in advance
Dora

Hi Dora,
What you can do is when you want to send a mail to customer after you receive the email for bill is do the following settings.
1) Create a condition record VV31 with the required Key combination where you can give the name of the Employee or end user with the email id.
2) Select the trasmission medium as 7 ( Simple Mail)
3) Once the Billing is done E-Mail will be triggered.
4) Downlaod it or forward it to your client with the additional text in the E-Mail.
Hope this helps.
Thanks and Regards
Rohit Dujari

Changing commandLink color for perticular user only

Hi,
I want to change color of commandLink , in perticular user session for that user only , if user has cliked on that link.
say, I have two users A and B.
My commandLink default color is Blue.
Both users are accessing the application.
And User A has cliked the commandLink, then his commandLink color should change to Red from Blue.
While user B should see his commandLink[b] color as Blue(as he not yet clicked the commandLink)
Can anybody tell me how to do this ?
Thanks
Sandip

You can use EL in the styleClass attribute.
Basic example with a boolean value:<h:commandLink styleClass="#{myBean.booleanValue ? 'someClass' : 'anotherClass'}" />The logic behind can just be written in MyBean#isBooleanValue(). The applicationMap might be useful to get/set values in.

Change E-mail for system user BWREMOTE

Similar Messages

Maybe you are looking for